Internet connection management - Tilt, TyTN II, MDA Vario III General

Hi,
As many people I have several internet connections (work – connected to my laptop via active sync when I'm in my office, WiFi at home and GPRS/EDGE/3G when I'm outside).
If there are a lot of Phone utilities, I don't find nice tools to manage internet connections.
Do you know some nice tools? (working on WM6 / TyTn II)
I fact I would like to get a tool permitting to classify the internet connections as follow:
Each program that wants to connect to internet, tests first if a "work" connection is available (trough active sync and laptop), if not, tests for a WiFi connection (already established) and if not, tries to establish a data connection (GPRS, EDGE or 3G).
I think a tool permitting to define priorities in internet connections could very useful. May it already exists or will be developed by someone.
Many thanks for your help.
Franck
Original HTC TyTn II (Kaiser 4550)
Rom: 1.56.406.5 (30/08/07)
Radio: 1.27.12.17
Protocol: 22.45.88.07H

Related

BlackBerry Connect w/ Kaiser

Hello all. I have successfully installed BB Connect 4.0.84 on my Kaiser and it is up and running...both my BES and BIS accounts. Fairly smooth.
Question - whenever I suff the Internet or update my RSS feeds with Insight, it kicks the BB Connect "off" (disconnects) and uses MediaNet. Then I have to go in and "force" BB Connect back on. A bit of a PITA. I have an unlimited BES plan from AT&T...do I need to set the Connection types to be something else now for these other programs that need to access the Internet?
Any help you could provide with you greatly appreciated.
Thanks!,
Adam
yes go into the connection settings. then go to advanced and select networks and set both to My Isp or which ever one your BES\BIS connects to.
There is a new one now (not just MediaNet) tha is called "My Blackberry" but when I select that one none of the other Apps connect to the internet. Once when I select MediaNet do they connect. They actualyl disconnect the BBerry,connect themselves, and then a bit later the BBerry appears to re-connect on its own....so this may work out to be ok.
Thanks - much appreciated.
welp sorry to say bud thats how that is going to work then... BES must use its own network settings and the MediaNet for internet uses another sorry your stuck unless entering in the settings for wap.cingular by hand and not using MediaNet work for BBC
I too have BB Connect installed on my Kaiser. I am able to get emails successfully over Blackberry and gmail. However, I cannot use Internet explorer over MediaNet. GoogleMaps, the weather plugin, QuickGPS, etc can all get the data they need when connected through MediaNET but IE will not load any webpages.
Any thoughts on how to fix this? There are no options to config connections within IE and the connection within settings seems to be correct (how else would the other applications be able to use MediaNET?).
Note:
I can launch BIS for internet explorer and use the Blackberry connection instead of MediaNET. Obviously though this is not optimal as BIS has lmited sites, low res pictures, etc.
This is not really in the right forum. THere are a couple of BBC threads in the other Kaiser forum that address your question directly. Go there and search for blackberry. You'll find them.
issue kaiser w/ bbconnect
Hello,
I have a kaiser and the bbconnect installed on it but when I want to activate it, all my today plugins disappear and I can't find them in the today setup anymore.
Does anyone have an idea?
I'm in France but I don't think the issue comes from that.
I need it for my job and at the moment i'm totally held so please help me if you can.
Thanks in advance

Internet with USB (active sync)?

Hi I could connected to the internet with my 6.0, but after upgrading to 6.1 i cannot get an internet conncetion via usb (active sync).
how do you get that to work?
thanks
more info would be helpful.......for example, are you trying to share the phones internet with the pc, or the other way around. which rom are you using, and if you are using a cooked 6.1 rom, please post in that rom's thread, you are far more likely to get a helpful response that way
if you mean internet connection as, let your computer use your mobile as a modem.
Then you use the internet sharing program.
Activesync is disconnected and the sharing takes over.
Wireless activesync doesn't work either when using internet sharing.
Thought I read somewhere here recently that with 6.1 your provider can track and distinguish your data useage now while tethering..ie BILL YOU $$$ if you dont have a tethering plan

Wi-Fi connects but NO data transfer

Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...
I have same problem with my Diamond.
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..
Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"
All of this do not work for me too...
Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.
in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(
Any other suggestions?
Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.
Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers
Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.

Auto-switch WiFi/EDGE/GPRS

Hi2all!
I have Diamond 1.93 ROM, and i am using WiFi @ home & work.
But on other places i must use EDGE or GPRS (no 3G networks).
Question is simple - each time i want to use EDGE i need to go into settings -> connections and set that programs using internet should use "this" connection.
How to "teach" my diamond to switch automaticaly i.e when wifi connected - use wifi for internet, otherwise - edge.
Thanks for replies!
If Wifi (or wired ActiveSync connection) is already connected, it will be used for Internet. If not, the device will try to etablish an Edge or GPRS or UMTS connection.
If you don't want the tool to automatically connect to EDGE etc. use nodata.cab (search here in this forum) to disable / enable the connections when needed / not needed.
What I'm still searching for, is a solution to somehow priorize the available connections. Like first try to find an open WLAN and only if there's no WLAN available then ASK to open a mobile connection. Mobile data connections are still expensive for most of us and so the automatical attachment is bad. On the other hand, keeping Wifi always open consumes to much battery.

internet connection problem

I have this strange problem connecting to the internet:
My situation.
I have a HTC TYTNII that connects to the internet using Vodaphone in the Netherlands.
Its my business phone and we have special settings for our phones internet connection.
- connection is trough "Cellular line (GPRS, G3)" and an accespoint "business.blabla"
then
- we have proxy settings, but only for "HTTP" in which we have to set our username and password
The strage thing is that some programs connects with no problem while others seem to activate the 3G connection, but then dont connect for some reason.
programs that do connect:
- Internet explorer
- outlook email
programs that dont connect:
- QuickGPS
- SeaSGEE.exe (quick position for GPS)
- Opera mobile and mini
please help. Anybody know what the problem could be?

Categories

Resources