Please excuse me for my English, i am not a native English speaker, and also thank you for reading this topic!
I am having trouble upgrading my O2 XDA IIs, I have followed the wiki here at xda-develope, and I also read some other material. Everything go smoothly: Resize the ext rom, flashing the ROM, but it just stuck at the white screen when I try to hard reset the PDA, and only after 4 hours (yes, 4 hours) It showed the align screen & wellcome, but everytime I reset the device (soft or hard) it will take another 4 hours to get in WM.
I have tried AKU 3.5 WM5 Helmi v1.4.CF2 R2(by baniaczek), 1.4 Vanilla version/Clean version and some PDAVIET WM 6.1 ROMs, all with the same result.
So could anyone show me what is wrong with my BA?
what do you mean by white screen? just plain white? or is there something written in it? pardon because i've never had that since i've had my BA.
have you ever gone into and through the hard-reset process?
if you havent... try this procedure.
SilverSamurai said:
what do you mean by white screen? just plain white? or is there something written in it? pardon because i've never had that since i've had my BA.
have you ever gone into and through the hard-reset process?
if you havent... try this procedure.
Click to expand...
Click to collapse
1. SoftReset
2. When the three color stripes(four including white) appear QUICKLY press and hold Record and Camera button.
3. If a menu appears... (if not softreset again while holding Record+Camera)
use Record To NAVIGATE the three items and Camera to TOGGLE Yes/No
4. Press Mail button to Execute the Instructions.
--> The instruction says that the PDA's screen will turn white for 30 seconds while it is clearing the registry, file etc... But for me, it takes 4 hours
clarious said:
1. SoftReset
2. When the three color stripes(four including white) appear QUICKLY press and hold Record and Camera button.
3. If a menu appears... (if not softreset again while holding Record+Camera)
use Record To NAVIGATE the three items and Camera to TOGGLE Yes/No
4. Press Mail button to Execute the Instructions.
Click to expand...
Click to collapse
After the fourth step nothing happens...if i soft reset the device it logs into the old OS and freezes often
@clarious @crabiorc
what option did you set the hardreset menu? No/Yes/Yes?
im sorry im not much of a help because i havent had that kind of glitch since day 1.
SilverSamurai said:
@clarious @crabiorc
what option did you set the hardreset menu? No/Yes/Yes?
im sorry im not much of a help because i havent had that kind of glitch since day 1.
Click to expand...
Click to collapse
Yes, I set it to No/Yes/Yes. Well, maybe this is hardware issue, I will have to fix it myself T_T
Related
I've tried all the usual key combos, and even an app and no matter what I try I can't get it to hard reset :-(
Soft reset, and then before the version info in the lower right corner comes, press power+record+camera. Then you're in. I have done it a few times, and I always have to try 3-4 times before I make it. When you're there you navigate and switch between yes and no with record and camera buttons. Choose no on the to, and yes to clean registry hive and format storage. Finally press the mail button, and the deed is done.
amazing thanks, someone should put this on the wiki I cant see it on the blueangel wm5 page
I pressed Record + Camera + Reset for 5 seconds and the same menu appears. I then use record button to go up and down in the option and camera to change from "yes" to "no". Press mail button when finished.
Hope this helps!
indiekiduk said:
amazing thanks, someone should put this on the wiki I cant see it on the blueangel wm5 page
Click to expand...
Click to collapse
Hum.... intresting..... did you try one of the following 5 linked pages starting from top of blueangel wm5 page?
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_WizardPort_v2a
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_WizardPort_v1.0-TuMa
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade_EXTENDED_ROM
Dear All,
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.
Thanks!
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Tried same as, use "Resco Registry". Thanks!
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Dear xplode,
I tried more than 10 times still can't memory registry changed. Do you know is any program installed will cause this problem.
Thanks a lot.
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
athena99 said:
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.Thanks!
Click to expand...
Click to collapse
Just curious, which registry keys?
There's also a possibility that programs "auto-loading" during startup might be causing the problem.
I've been using the freeware reg editors from PHM & .Fred's Task Manager & both works in "all" of the AKU 3.5 ROMS here.
You may try to install the test cab attached which changes the label of your left & right softkeys to Test1 & Test2 respectively. Changes are effective immediately, soft reset & see if it gets retained.
xplode said:
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
Click to expand...
Click to collapse
Thanks xplode, I waiting for you latest 3.5 rom and test it.
Hey everybody! This is my first post on the xda-developers forums and I thought I'd make it a useful one. I attached the first WinMo6 application I made for my Tilt. It's a program which locks your keypad with the standard PIN prompt and quits. It's use? Lock your phone and set it to standby with two keys and no stylus.
Reason I wrote it? The second day I got the Tilt I found that the concept of being unable to lock the phone without the stylus confused and infuriated me.
Here's how you use it:
1. Download the .Zip file to your computer.
2. Extract the contents and copy the contained .Exe to your phone
3. Use jgermuga's PTT remap instructions found here:
http://forum.xda-developers.com/showpost.php?p=1577293&postcount=12
4. For the \HKLM\Software\Microsoft\Shell\Keys\40C7 key set the (Default) value to "\Path\To\KeyLock.exe" (Obviously replace \Path\To\ with the appropriate path, mine was "\Temp\")
5. Also add a string called ResetCmd with the same value.
I used "MobileRegistryEditor" to edit the registry on my Tilt. Also included in the .Zip is the source code in case you want to compile from source, audit the code, or just don't trust me. Compile it yourself if you wish.
With the above steps you can have a simple method to lock and standby your phone: Hold down the PTT talk button for just about 1 second then quickly tap your power button. As soon as the application begins launching your phone is already being locked so you do not have to wait for it to display anything other than the spinning "please wait" wheel. Power it off right away.
This has made my life significantly easier, and I hope it helps yours!
Enjoy
-Anthony
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
or you can download devicelock1.2, and map it to one of your hardware buttons. pretty much uses the built in device lock, but it makes it available so you can map it to a button, thus no need to use stylus to lock.
no need to unzip, just drag the file into your phone and install.
NguyenHuu said:
or you can download devicelock1.2, and map it to one of your hardware buttons.
Click to expand...
Click to collapse
Where would I get this?
^ i updated my post, its attached now.
Ty, I ended up searching the forums for it and found it. I'll give it shot and post back in a few.
Thanks Device Lock 1.2 Works Like a Champ. TYVM for your help sir.
Hmm whats the deal with the beeping noise right before it initates the locking?
(I take it back, I like the beeping noise..)
Whats the deal with if you have it on EASY unlock. and Black Screen
When you hold down PPT to have it lock... then after it the screen goes black you press ppt again... Your easy lock is than disabled?
(I should probably post this in the Device Lock 1.2 orignal thread http://forum.xda-developers.com/showthread.php?t=305402&highlight=device+lock)
I'm honestly unsure why it would not lock your device although I did set up a numeric PIN for my device which it prompts me to enter. Try running the .exe from the Program Files directory if you're still interested. If it doesn't lock your phone then I'm unsure why.
DuMnUt101 said:
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
Click to expand...
Click to collapse
Yea I had tried that too. But the Device Lock 1.2 seemed to have solved my problem. Thanks though.
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
cincy1020 said:
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
Click to expand...
Click to collapse
when you use device lock, it will lock your phone and dim it, not turn off the screen. so you do not need to press the power button to wake it up before unlocking.
there are options in the settings that will let you turn off the screen when you lock, but i dont think that is what you want. leave that setting unchecked.
just rec my diamond. all i can get on is windows 6 anybody help
Please elaborate. Your post, as it stands, does not make much sense to me....
Anyone else?
sorry i mean there is no fancy screen like weather, internet etc.just green windows
Strange.....make sure TF3D is enabled as a today-plugin. Start>Settings>Today>Elements>tick TF3D (rough translation from German ROM).
If it´s not there, installation might have been interrupted when you first turned it on - hardreset may help.
thanks looks like a hard reset sorry complete novice how do i reset
READ THE MANUAL!
Off the top of my head I believe it should be: hold down "Volume Down" plus "Enter" Key, press the reset button while still holding down above buttons. Let go of the reset button and follow the on-screen instructions....
When it boots back up, let the machine do it´s job after the calibration screen. The device will install a few apps (Opera, TF3D, HTC Phone skin etc.) and reboot automatically. If everything goes well, you should be up and running in a couple of minutes....
thanks for the help looks like a 2 man job to reset will take to orange let them sort it thanks anyway
well hi, im new here, i got an xda diamond touch, and my problem is that touchflow 3d doesnt start, i get always the windows mobile GUI, how can i start touchflo 3d ?
Sorry to ask the obvious, but you have enabled TF3D, haven´t you?
Start>Settings>Today>Plug-Ins>check TF3D is ticked (rough translation from German ROM).....
thanks for the quick respond, well when i enter today settings there is no touchflow 3d in the plugins only the windows stuff
Now that´s strange.....what ROM are you using? Standard HTC or some provider branded ROM? Thsoe ROMs usually contain the TF3D files - they are installed when you first boot up the device. It´s possible to supress that installation by doing a soft reset quickly after the initial display calibration screen....maybe that´s what happened?
If you haven´t done too much tweaking/installing you might try the old hard reset (you´ll loose all your settings/programs etc., that you have already installed). If you don´t want to do that, maybe someone else has got a better idea how to revive your TF3D.....
ok i have done a softreset yet, but didnt helped, now will try with a hardreset hmmm
Zida2k said:
yeah i have a O2 branded rom, how can i do a softreset ?
Click to expand...
Click to collapse
Have you had a look at the manual yet???
Soft reset: either press the red button in the stylus hole with the stylus, or long press the power key to shut down the device and then restart it - same effect.
Hard reset (reset back to how it was when you received the device): Push and hold "Volume Down" Key + "Enter" Key, push the reset button in the stylus hole while keeping the above buttons pressed, release the reset button and answer the onscreen questions.
When the device boots up after the hard reset you should be taken to the display calibration screen. After that the device will show you a quick countdown before installing additional apps (TF3D, phone skin, Opera, etc., depending on the ROM you are using). When installation is finished (do NOT interrupt it!), the Diamond will automatically soft reset. After that you really should have your TF3D installed and working.....
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Zida2k said:
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Click to expand...
Click to collapse
The "format" option also formats your internal storage (your device´s hard disk, so to speak), so it´s really up to you......by formatting the internal storage you will of course loose all your files on that media (movies, pictures, whatever you´ve already put there) and have to copy it over again.....
wow seems its working, thank u so much michi really THANK U
You are welcome! Glad, I could help!
lost a Touchflo theme
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Pesey said:
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Click to expand...
Click to collapse
Click Start/Settings then select the Personal Tab and click Today. Click the Items Tab at the bottom then click on the box to check Touchflo3D then click OK. You may have to scroll down a bit in the items list to find touchflo3d but it should be there.