am i missing something? - Touch Diamond, MDA Compact IV General

just rec my diamond. all i can get on is windows 6 anybody help

Please elaborate. Your post, as it stands, does not make much sense to me....
Anyone else?

sorry i mean there is no fancy screen like weather, internet etc.just green windows

Strange.....make sure TF3D is enabled as a today-plugin. Start>Settings>Today>Elements>tick TF3D (rough translation from German ROM).
If it´s not there, installation might have been interrupted when you first turned it on - hardreset may help.

thanks looks like a hard reset sorry complete novice how do i reset

READ THE MANUAL!
Off the top of my head I believe it should be: hold down "Volume Down" plus "Enter" Key, press the reset button while still holding down above buttons. Let go of the reset button and follow the on-screen instructions....
When it boots back up, let the machine do it´s job after the calibration screen. The device will install a few apps (Opera, TF3D, HTC Phone skin etc.) and reboot automatically. If everything goes well, you should be up and running in a couple of minutes....

thanks for the help looks like a 2 man job to reset will take to orange let them sort it thanks anyway

Related

Button assignment keeps on reverting to default

Hi,
One of the things i really find annoying about my phone setup is the fact that I keep on knocking the camera button and activating the camera by mistake. I don't use the camera that often (no guesses why) so I would prefer to assign the button to ALT-TAB or something that I would find a little more useful.
I have made the change in settings but it seems that my new button assignment only works until I perofrm a soft reset. Then the button reverts back to starting camera.
Is there any way of doing this so even after a soft reset my button assignments don't change?
Thanks in advance,
Charles
Go to Device\windows\Startup and delete cameradetect. Everytime you reset now the things you assign will keep.
Thanks Pug. You're the man!
I wondered the same thing, thanks Pug
Thanks Pug - same here
how to disable from rom?
Hi all
I sort of have the same problem with the camera. don't use it either. I would like to disable it from within the rom but i can't seem to find it.
The problem is that if you get a hard reset the detect camera is there again in the startup
anyone any suggestions? is it baked in the os rom?
thnx in advanced :lol:
It is Possible to remove the file using a script during a hard reset. All this does is delete the cameradetect shortcut, you still need to re-assign the button. This can only be done by cooking the ROM though. I will post the script as soon as I can.
It is Possible to remove the file using a script during a hard reset. All this does is delete the cameradetect shortcut, you still need to re-assign the button. This can only be done by cooking the ROM though. I will post the script as soon as I can.
Thnx PUG !!!!
Hey PUG
thnx for the info. Can't wait for the script (no hurry of course). I didn't know you could do scripting with a pda but of course it is a form of windows :roll: .
Well thnx again and a Merry X-Mas to ya :lol:
Greetz,
Mark

Button lock always returns after soft reset

Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again

Very long boot time after ROM upgrading

Please excuse me for my English, i am not a native English speaker, and also thank you for reading this topic!
I am having trouble upgrading my O2 XDA IIs, I have followed the wiki here at xda-develope, and I also read some other material. Everything go smoothly: Resize the ext rom, flashing the ROM, but it just stuck at the white screen when I try to hard reset the PDA, and only after 4 hours (yes, 4 hours) It showed the align screen & wellcome, but everytime I reset the device (soft or hard) it will take another 4 hours to get in WM.
I have tried AKU 3.5 WM5 Helmi v1.4.CF2 R2(by baniaczek), 1.4 Vanilla version/Clean version and some PDAVIET WM 6.1 ROMs, all with the same result.
So could anyone show me what is wrong with my BA?
what do you mean by white screen? just plain white? or is there something written in it? pardon because i've never had that since i've had my BA.
have you ever gone into and through the hard-reset process?
if you havent... try this procedure.
SilverSamurai said:
what do you mean by white screen? just plain white? or is there something written in it? pardon because i've never had that since i've had my BA.
have you ever gone into and through the hard-reset process?
if you havent... try this procedure.
Click to expand...
Click to collapse
1. SoftReset
2. When the three color stripes(four including white) appear QUICKLY press and hold Record and Camera button.
3. If a menu appears... (if not softreset again while holding Record+Camera)
use Record To NAVIGATE the three items and Camera to TOGGLE Yes/No
4. Press Mail button to Execute the Instructions.
--> The instruction says that the PDA's screen will turn white for 30 seconds while it is clearing the registry, file etc... But for me, it takes 4 hours
clarious said:
1. SoftReset
2. When the three color stripes(four including white) appear QUICKLY press and hold Record and Camera button.
3. If a menu appears... (if not softreset again while holding Record+Camera)
use Record To NAVIGATE the three items and Camera to TOGGLE Yes/No
4. Press Mail button to Execute the Instructions.
Click to expand...
Click to collapse
After the fourth step nothing happens...if i soft reset the device it logs into the old OS and freezes often
@clarious @crabiorc
what option did you set the hardreset menu? No/Yes/Yes?
im sorry im not much of a help because i havent had that kind of glitch since day 1.
SilverSamurai said:
@clarious @crabiorc
what option did you set the hardreset menu? No/Yes/Yes?
im sorry im not much of a help because i havent had that kind of glitch since day 1.
Click to expand...
Click to collapse
Yes, I set it to No/Yes/Yes. Well, maybe this is hardware issue, I will have to fix it myself T_T

Touchflo 3D Doesnt Start

well hi, im new here, i got an xda diamond touch, and my problem is that touchflow 3d doesnt start, i get always the windows mobile GUI, how can i start touchflo 3d ?
Sorry to ask the obvious, but you have enabled TF3D, haven´t you?
Start>Settings>Today>Plug-Ins>check TF3D is ticked (rough translation from German ROM).....
thanks for the quick respond, well when i enter today settings there is no touchflow 3d in the plugins only the windows stuff
Now that´s strange.....what ROM are you using? Standard HTC or some provider branded ROM? Thsoe ROMs usually contain the TF3D files - they are installed when you first boot up the device. It´s possible to supress that installation by doing a soft reset quickly after the initial display calibration screen....maybe that´s what happened?
If you haven´t done too much tweaking/installing you might try the old hard reset (you´ll loose all your settings/programs etc., that you have already installed). If you don´t want to do that, maybe someone else has got a better idea how to revive your TF3D.....
ok i have done a softreset yet, but didnt helped, now will try with a hardreset hmmm
Zida2k said:
yeah i have a O2 branded rom, how can i do a softreset ?
Click to expand...
Click to collapse
Have you had a look at the manual yet???
Soft reset: either press the red button in the stylus hole with the stylus, or long press the power key to shut down the device and then restart it - same effect.
Hard reset (reset back to how it was when you received the device): Push and hold "Volume Down" Key + "Enter" Key, push the reset button in the stylus hole while keeping the above buttons pressed, release the reset button and answer the onscreen questions.
When the device boots up after the hard reset you should be taken to the display calibration screen. After that the device will show you a quick countdown before installing additional apps (TF3D, phone skin, Opera, etc., depending on the ROM you are using). When installation is finished (do NOT interrupt it!), the Diamond will automatically soft reset. After that you really should have your TF3D installed and working.....
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Zida2k said:
ok thanks but what should i do, restore manufacturer default or restore manufacturer default and format movinand?
Click to expand...
Click to collapse
The "format" option also formats your internal storage (your device´s hard disk, so to speak), so it´s really up to you......by formatting the internal storage you will of course loose all your files on that media (movies, pictures, whatever you´ve already put there) and have to copy it over again.....
wow seems its working, thank u so much michi really THANK U
You are welcome! Glad, I could help!
lost a Touchflo theme
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Pesey said:
Hi, could someone help me?
My HTC P3700 doesn't show option for Touchflo 3D any more after I accidently press the clear storage.
Click to expand...
Click to collapse
Click Start/Settings then select the Personal Tab and click Today. Click the Items Tab at the bottom then click on the box to check Touchflo3D then click OK. You may have to scroll down a bit in the items list to find touchflo3d but it should be there.

TouchFLO 3D on Xperia

Hi guys.
I'm new to the Windows Mobile world and only got my Xperia X1 a couple of weeks back. I want to get the TouchFLO 3D interface on there.
However, I want to use CABs which allow me to switch to the TF3D interface and back out again to Xperia, rather than using a cooked rom.
I've looked around and at first it seemed fairly simple, but then the installation wouldn't work because the file didn't have certification security (or something like that).
I've seen articles saying you have to install older versions first, and almost all seem to point to cooked roms.
Does anybody know of a way to install the TF3D interface from a CAB file, and be able to switch in and out of it, like you can do with Spb Mobile Shell 3.0.1?
I have Spb Mobile Shell 3.0.1 and Spb Weather installed, but I really want the TF3D interface... the weather animations on it are absolutely amazing!
Any help will be very much appreciated. Thanks for your time.
Regards
Sonny
If you check out the stickies in this section, one of them is all about programs, panels and tweaks.
http://forum.xda-developers.com/showthread.php?t=441439
Going through it, there is a specific one about installing TF3D as a cab and then running it as a panel.
Wow! Thanks Zenith.
Just managed to install Touch-IT_Blackstone_Manila.cab and then TF3DPanelInstaller.CAB.
Works a charm. Exactly what I was after.
I'm now going to install Touch-IT_Blackstone_Manila_HD_FULL.cab and see how the applications work.
Thanks again for guiding me in the right direction, very much appreciated.
Regards
Sonny
give him the real deal....go to rom section..
Issues With Right Selection Button
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Sorted Button Issue
Hmm, after checking the button settings again, it turns out the Right Selection button was set to Today. Removed the selection... sorted.
sonnysoul said:
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Click to expand...
Click to collapse
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
himuraken said:
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
Click to expand...
Click to collapse
So this is to enable the right button to be assigned? Hmm.... kind of remember having that problem but somehow it was solved. Think with B2 of Daran's cab.
ManilaToday.dll Fixed The Issue!
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
sonnysoul said:
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
Click to expand...
Click to collapse
glad it work for you. i forgot to mention that credit goes to the person that provided this in the touch itJe v7 thread. not sure who it was so please forgive me.
Hi, it is my first post in a long time. Now I'm Xperia user.
I tried to download the today.dll but the link is gone. Additionally, my manila is not working: for some unexplained reason the program keeps trying to enter but did not succeed. It starts and then restart without opening.
Can somebody help me? I'm not inclined to try a Rom with manila for in that case I lose the "Ç" key and the letter recognition.
I use the Brazilian Sony Rom version from April 23, 2009.
Thanks, in advance!
Manila not working on Brazilian Xperia
Hi, this is my first post in a very long time. I tried to install this on my Xperia but got 2 errors:
1 - the right hard key problem and the file Today.dll is no more available at the said link
2 - the manila tries to start but does not enter. It keeps restarting but to no avail!
Please, some help is in order! I use brazilian Sony Rom and a cooked Rom is not na option since I would loose the hard "Ç" key and the on screen letter recognizer.
Also, I could not put the "Transcriber" to work.
Thanks
KMur

Categories

Resources