Quick Questions....
Can I upgrade with the Official ROM upgrade if I have HARD SPL installed on my PPC? Or do I need to revert?
Thanks for the help!
yes you can
Related
Hi
I just got a dopod c800 AKA p4350.
Its got WM 5 on it. I wanted to upgrade the same to WM6.
Have read the threads but couldnt figure the english rom version and also need some help on upgrading.
can someone point me to the right rom and the instructions.
thanks
Whatever you do, if your SPL is currently 1.XX do NOT hardSPL or use USPL. Use the official RUU to attemp to flash your device. IF it changes your SPL and IPL to 4.xx then you can use HARDSPL and USPL.
Other than that, you can download the official WM6 from the thread that's stickied that talks about all the ROMs.
I have dopod 838 which i already upgraded to WM6 (for the first time, since I use PDA ) I'm following the upgrade tutorial from the wiki and I use the WM 6.0 ROM made by mfrazzz.
my question is how to downgrade to WM5 (original from dopod asia)? I already download the ROM but I'm not sure whether i need to downgrade to IPL/SPL 1.xx like when I'm upgrading it to WM6?
I see another new ROM is released, and i want to switch to that ROM, must I re do all the steps I done when upgrading from WM5 to WM6?
note the IPL/SPL is 3.xx on my dopod 838.
please help. thanks
Please see mestrini's response
markhard said:
I have dopod 838 which i already upgraded to WM6 (for the first time, since I use PDA ) I'm following the upgrade tutorial from the wiki and I use the WM 6.0 ROM made by mfrazzz.
my question is how to downgrade to WM5 (original from dopod asia)? I already download the ROM but I'm not sure whether i need to downgrade to IPL/SPL 1.xx like when I'm upgrading it to WM6?
I see another new ROM is released, and i want to switch to that ROM, must I re do all the steps I done when upgrading from WM5 to WM6?
note the IPL/SPL is 3.xx on my dopod 838.
please help. thanks
Click to expand...
Click to collapse
Never go from 3.xx to 1.xx as the SPL might get locked. Stop at 2.xx before downgrading further.
WM5 can work with 1.xx and 2.xx but WM6 only with 2.xx and 3.xx
oh no.. I did re-flash it back to 1.xx per instruction on the wiki. I then upgrade the ROM to T-Mobile ROM which is 2.xx, after that upgrade again to 3.08 then upgrade to WM6.1
the upgrade is success, do I need to check for something? as you said that the SPL might locked?
so.. in case i want to change/downgrade ROM i just need to re-flash to T-Mobile ROM which is 2.xx?
thank you for your answers
markhard said:
oh no.. I did re-flash it back to 1.xx per instruction on the wiki. I then upgrade the ROM to T-Mobile ROM which is 2.xx, after that upgrade again to 3.08 then upgrade to WM6.1
the upgrade is success, do I need to check for something? as you said that the SPL might locked?
so.. in case i want to change/downgrade ROM i just need to re-flash to T-Mobile ROM which is 2.xx?
thank you for your answers
Click to expand...
Click to collapse
Sometimes,if you directly downgrade from 3.08 to 1.xx,SPL gets locked and it's very difficult to bring it to 1.xx,so its advised,if your phone is already CID unlocked and upgraded to 3.08,don't downgrade to 1.xx again,but if you want to reflash a new rom and want a solid base like T-mobile,then just downgrade to 2.xx,avoid going down to 1.xx.
Cheers!
OK, thanks for the answers
Ok I need help. I just picked up a second-hand wizard from someone who claims to have done all the unlocking and has flashed it to WM6 Professional. On the bootup screen it shows:
IPL 2.16
SPL 2.16
GSM 02.19.11
OS 11.0.0.1
What I want to know is how I can install the TouchFlo w/ cube Rom as I find that more intuitive than what I am currently using. What would I need to download, upgrade/downgrade to get this running from start to finish.
Any help is appreciated, thanks.
Which is the present Rom installed on it ? Which wm6 is it ?
this is what it reads in the about
CE OS 5.2.1933 (build 18533.0.7.0)TNT
from the threads im reading, some say i need to flash to an official rom, then downgrade to 1.x then upgrade to 2.26 and then flash to whatever rom i want. is that right?
jazn54 said:
this is what it reads in the about
CE OS 5.2.1933 (build 18533.0.7.0)TNT
from the threads im reading, some say i need to flash to an official rom, then downgrade to 1.x then upgrade to 2.26 and then flash to whatever rom i want. is that right?
Click to expand...
Click to collapse
As you are already running wm6 TNT series Rom,it means your phone is already SIM/CID unlocked,there's no need to downgrade to 1.xx to unlock and then upgrade to 2.xx and flash any wm6 rom.
Yes ! its highly recommended,if you want to change to any other Rom,first flash the T-mobile 2.26 to provide you a good base,but its not necessary,you can download any wm6 or wm6.1 rom and just connect the phone with pc via usb cable and flash the rom.
You can try the latest wm6.1 TNT.19199 series v.2 Rom,it has TouchFlo version also from this link :-
http://forum.xda-developers.com/showthread.php?t=367534
Cheers!
Hello, I have a diamond with a stock 1,93 SPL and would like to know if it is possible to install a 1,93 hard spl and how to do it and if possible where to find it
thx in advance
skyhacker said:
Hello, I have a diamond with a stock 1,93 SPL and would like to know if it is possible to install a 1,93 hard spl and how to do it and if possible where to find it
thx in advance
Click to expand...
Click to collapse
Yes it's possible, 'cause this is what I did.
Make a search on the forum or go to the Diamond wiki, you'll find 1.93 olinex with all explanations you need for install.
Dear All,
i want to upgrade my blackstone...
should i do HARD SPL first? or i just install the radio/rom??
vic_lee said:
Dear All,
i want to upgrade my blackstone...
should i do HARD SPL first? or i just install the radio/rom??
Click to expand...
Click to collapse
In order to upgrade to a cooked rom you will need either HSPL or USPL on your device first.
I'd recommend reading up on them first in the wiki and then follow cRaCKwHoRe's guide (see my signature) on how to install them.
thx a lot man...