Related
Hey guys.
ive made a simple patch for the blue angel running windows mobile 5 where we got the error connection loss after loading any more than 200kb.
The patch I have made sorts this problem and one page for example that I now know that loads and didnt used to is Ebay, and buzzdev.
Simply insert this into the registry of the blueangel,, only for Windows Mobile 5.0.
U MUST let the registry flush before reseting the device. To do this press the power button to turn device off, wait 15 secs, turn back on and then soft reset.
Cheers.
s1nn0n
I have updated this, still seemed to throw up the error with v1.0, v1.1 seems fine 100% of the time.
OK, I feel like a bloody moron and a total newbie here! I have tried importing the regfile with PHM Registry Editor, but I can't seem to do it. Could you please tell me what you use?
1.1b is now up.
cache has been increased.
ill make a cab later to make it easier. this works fine for me now even over some pages tht still didnt quite seem to load fully in 1.1
Great, thanks! Maybe I can install it as well then... I was actually wondering why eBay wouldn't load while I was looking for some stuff in bed last night, but this explains it. Does this help on the pitiful speed of loading the pages as well? I don't think eBay and IMDB were that slow to load on the WM2003SE I used before. Or were they?
speed doesnt seem to bad to be honest. id say its equally comparable to 2003se.
ill get tht cab made up now.
ok here it is,
the cab as promised.
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Hmm... weird... first time I installed WM5: I had nooooooooo problmes using PIE with WiFi and "big" sites. Now, on my 2nd try with WM5 I have those problems.
I'll try the patch later and write down what's going on.
Heres another patch which is slightly updated, v1.2. It has the following changes:
1. Makes pages load faster having more connections per server.
2. The timeout time has been increased so that the page will load for longer and wait for the page to fully load before displaying the connection lost error.
3. Cache of ssl pages has been disabled.
Mastiff said:
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Click to expand...
Click to collapse
Mastiff: Please use the latest version and tell me how u get on...
I don't have that problem
I use the first patched version how about you?
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
s1nn0n said:
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
Click to expand...
Click to collapse
That's the crazy thing: first time I installed WM5 on my PH20B1 BA, I had no problems with eBay and other much bigger sites... then I went back because of the performance to WM2003SE, had there the phone problem and several others, so I switched again to WM5 and NOW I have those problems with the PIE... First time I had the v1 WM5 and now the "v3" - that's the only difference. However, I'll try out that patch.
Mastiff said:
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
Click to expand...
Click to collapse
Just loaded ebay.com with the craddle connection and didn't have any problem.. I used WiFi with other sites and never saw that problem... Tomorrow i can try loading it at a wifi connection
OK, I just tested. eBay works with the cradle, but not with WiFi.
I tested it over wifi and works fine.
No patch applied (only the 1st patched rom version)
I still can't see the buttons.. I guess we need the Hima's IE Registry
I have those problems w/ PIE since i have the patch 3 version from WM5, with the very first version i had no problems concering PIE and Wifi...
I'm starting to think that the problem is WiFi itself, not just surfing via WiFi: http://forum.xda-developers.com/viewtopic.php?t=29904
Ok guys, I believe I've found the regkey to fix all the dropping wifi issues within WM2005. This has been tried and tested on my Blue Angel SX66 Cingular with the hack listed in the wiki to get up to WM2005. Anyways, to the patch, unfortunately I don't know how to make cab's so follow along. Get yourself a registry editor (i.e. TRE) and navigate to HKEY_LOCAL_MACHINE\Comm\"Your Adapter Name. Mine had 2 keys, tiacxwln and tiacxwln1, tiacxwln1 was the ticket for me" Within the Parms folder you'll find a DWORD value named ResetOnResume which should be set to '1' change that value to '0' and hit ok in the bottom left corner. Give your BA a soft reset and all should be good. I haven't tested this for side effects, but it now reconnects to wifi on resume without a hitch. Please post results back here, I hope I am not jumping the gun!
TIP: To find your adapter name go into Settings>Connections>Network Cards>Network Adapters and look for "xxxxxxx Compatible Wireless Ethernet" again, mine was called 'tiacxwln Compatible Wireless Ethernet'.
Hallelujah!!!!!!!!!!!!
This has been my number one gripe with WM5, everything else as just been small annoyances. But this one... I use WiFi a lot, actually almost every time I turn he thing on. I even got WiFi in my car! So thank you, thank you, thank you, thank you, thank you!
Oh, do I have to say that it really works? :lol: Qtek 9090 btw.
You who try this, don't forget to turn off the unit for 15 seconds before you do the soft reset, this flushes the registry.
This also appears to work on WM2003, at least with my SX66 running the current revs from the SX66 Standardization Project.
WOW ... its perfect ..... you're realy MAN !!! thx thx thx.....
I've updated BA_WM5_FIX.CAB so that it sets this registry value:
ftp.xda-developers.com/Uploads/Blueangel/wm5_test/BA_WM5_FIX.CAB
with this registry setting wifi on my BA will not stay off. anyone else getting this?
Yes, I see the same thing. Now suspending the unit will turn on wifi on resume. So is that a problem for those who worry about battery life? Probably. Do I care? Nope! But then I'm in my own home around 90 % of the time, within reach of the charger. No, I'm not a slacker, I actually run a business and work 8-10 hour days, but I have my office at home!
Sorry guys I don't understand what's happening. What's going on with the wifi?
brn2prgrm: On WM5, if you turn Wifi on, switch the device off, then back on, Wifi does not resume. This action was default on WM2003SE. The registry key that makes Wifi resume by itself when you turn the device back on was found, and then integrated in the WM5 patches CAB. That's basically all
Eh...it was he who found that key! What he's wondering about is why it isn't possible to make it stay off when you have enabled this key, even if WiFi is off when you suspend, it will turn on when you turn on the PPC again, which it didn't do in WM2003. It was restored to last state, on or off.
Another thing: Has anybody tried this hack with the wireless control app from the Universal that was posted here a while ago, to see if it stays off then?
mamaich said:
I've updated BA_WM5_FIX.CAB so that it sets this registry value:
ftp.xda-developers.com/Uploads/Blueangel/wm5_test/BA_WM5_FIX.CAB
Click to expand...
Click to collapse
I think there is a TYPO in the cab file.
I found the reg setting as tiacwln1
Shouldn't this be tiacxwln1 ????
yes, it is a typo.
I've removed the mistyped key from BA_WM5_FIX.CAB and made a BA_WIFI_FIX.CAB which sets the correct registry value. They are in the same dir on FTP
I don't understand the wifi thing:
I get some connections from my neighbours,but my own linksys won't connect?
What do I have to do to connect my MDA to my linksys router??
since I upgraded to WM5 I can't get my wifi to operate 100% of the time--for example, when I connect to wifi--the signal is locked then I try to send/receive my email and then my SX66 tries to connect via GPRS--do I have a setting that's incorrect? or is it because of this thread which is now patched?? HELP--I use my wifi a lot and lately I can't TIA!!
Mastiff said:
Eh...it was he who found that key! What he's wondering about is why it isn't possible to make it stay off when you have enabled this key, even if WiFi is off when you suspend, it will turn on when you turn on the PPC again, which it didn't do in WM2003. It was restored to last state, on or off.
Another thing: Has anybody tried this hack with the wireless control app from the Universal that was posted here a while ago, to see if it stays off then?
Click to expand...
Click to collapse
I'm waiting for a patch that does exactly what you thought off, restores its last stage. Not sure hwo long would it take to come out with it.
Anyway, I do not find it a hassle to Turn On Wifi once again instead of it swtiching on by itself upon power up..... I use wifi a lot too though, but haven't found a prob with it.
how about a registry patch that fixes that bluetooth auto turn off annoyance?
O2 XDA IIs (wifi)
Hi , I have recently upgraded my 02 xda IIs to WM5 ,
after applying the patch , wifi worked for a while , then now when i try wifi again, i get this error.
FORBIDDEN.
you were denied access because: access dinied by access control list.
Someone please help me.
Anyone have a cab or the correct registry settings for the AT&T rom quickgps.
Did the soft reset to prevent the installation of all the AT&T crap, and now my quickgps just gets connection failure.
I searched the forums but didn't find any definite answer to this. Any suggestions would be appreciated.
My data has expired, and now can't reconnect. It WAS connecting just fine. Maybe it's an issue with the servers?
I can't connect either...
FWIW, after several failed atempts throughout the day, it has finaly just now connected. so I think at least in my case, it was just a server issue. I have it set to update every time active sync conects, which hapens at least once a day. so it SHOULDN'T have ever gotten a week out of date. perhaps it was down for a while? it will be interesting to see if the rest of you can connect now.
Nope
Stil no connection. Even tried wifi and edge. If I keep hitting download a few times, it eventually starts counting progress.. but once it hits 100% still comes up connection failed.
Before I hard reset 4-5 days ago.. was working fine, no problems at all.
Thats why I thought it must just be a setting or something that messed up.
Yup ever since I did that hard reset to remove the AT&T crap. QuickGPS downloads to 100% but I get an error message saying: "Connection failed. Please try again later"
hmmm, ok, my problem was different. This morning it never even started counting down, then this afternoon it started working. However I did install a new program today, so it may have been after the soft reset that it started working... can't remember exactly which occured first.
if anyone could post working registry settings, that would be awesome, or even your reg key so that we can work it out.
So anyone have a key from a working QuickGPS
If someone could just export a working QuickGps key, I'll compare them to make sure that the settings are the same. I would be most appreciative.
Thanks!!
Doesn't really seem to be much in there of interest, but here you go...
Thanks
Thanks.. I also think there is a lot more stuff under
HKLM/Software/QuickGPS
Sorry, didn't notice there was another one. Mine is actually in HKLM/Software/HTC/QuickGPS. Here's that one...
I also have the same problem since yesterday, is that possible that HTC change the adress of the serveur?does anybody new something, very strange!
Dunno, that registry file above is totally different than what my registry setting is.
I googled quick gps cab, and found a different program, gps quick fix, installed it and it works fine. Quick GPS even shows the data to be valid etc.
I'm guessing that somehow we just have some bum reg keys, and they are preventing the updates.
Just wondering if anyone is having the same problem with telenav, or if there is a fix to it. Ive looked around the forum with search and cant seem to find anything but telenav not being compatible with custom roms.
Im using Dutty's latest rom with my Tilt and i recently just added telenav to my phone, when i bring it up, it connects fine and gets to the screen where you select "drive to" and "maps". When i try to determine my own location to record it, i hit go and it basically brings up the connecting box where it goes from 0 to 100% but it doesnt move at all for me after a few mins anywhere i go..also i cant do any routes for the same reason..it seems like its just not making a good connection when im outside. I checked my connection settings, proxy is not on..set up for medianet on both connections as i read from another persons suggestion, but still no go..
assisted gps is also turned off..i can do quik gps and everything else just fine but it hangs when trying to download the route...ive re-installed the program also but no go still.
anyone have any ideas to what might be causing this?
if this problem has been resolved, ive looked and looked in the forums but maybe my eyes are blind lol.
thanks for any help.
I'm running Dutty's latest 6.1 dated April 9 and Telenav and have no issue. Runs flawless.
ok
What are your connections settings, are you on medianet?
liquidraven said:
What are your connections settings, are you on medianet?
Click to expand...
Click to collapse
Yes I am on medianet. Proxy is disabled.
gprs setting
is your gprs setting set to chap authentication, i havnt touched this but mines set to chap, but this is auto configured when setting up the network with att?
still not working..
Yah my telenav is still hanging up at getting gps when trying to find route and my location...installed gpsgate and changed the radio to 1.58.16.27 not sure what else to try..
Can't remember, but do you download telenav through Pocket IE after you flash the custom rom?
I can't remember if it auto-decides what download you get based on your PIE useragent, or if you select the product for downloading... but if it's based on UserAgent you may run into issues...
Cellular video, for example, does not work if the UserAgent is not the Tilt
yah
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
liquidraven said:
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
Click to expand...
Click to collapse
First, did you Hard reset after rom flash at the "Tap here to alighn" screen? Second, did you install Telenav prior to any cooked rom flash? The reason I ask this if you got the file from AT$T while you were using a stock rom then that is fine, but if you got while you were using a cooked rom, it is probably a bad file. The reason is that most cooked roms have the PIE User agent set to TYTN II not HTC-8900 (AT$T Tilt) which could cause a corrupt download if you indeed have a Tilt. I suggest uninstall, power down, power back up and try the file I attached. I have installed it with every rom I have tried, literally dozens and never had an issue. When I say power down, power back up, dont do a soft reset. Use the power button.
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
liquidraven said:
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
Click to expand...
Click to collapse
Good Luck. I hope it works for you.
thanks!!
lol it did fix it..thanks
liquidraven said:
lol it did fix it..thanks
Click to expand...
Click to collapse
You my friend are quite welcome. Just glad it worked.
ugh
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
liquidraven said:
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
Click to expand...
Click to collapse
Just a question but do you have assisted Gps enabled? If so, disable it. If that doesnt fix it, maybe try GPSTest?
Having decided last weekend that my Kaiser was way too fast, I loaded it up with bloatware.TouchFlo,HTC Cube,6 Tab Home Plugin,New HTC Default Theme,Audio Manager, Home Customizer,Comm Manager and Kaiser Tweaks. Most of it I loaded as .cabs or .zip thru Missing Sync for Mac. I also downloaded Windows Live Services and set up push email for my @live account. Everything works great except the phone now spontaneously connect to MediaNet (Edge) all day for no reason. The connection is not followed by email or anything else, it just connects. When I check Task Manager 95% of the time Activesync is running but not always. Have set Activesync from " as they arrive" to manual. The phone still connects for no reason. The notification that the phone is connecting comes up , I press cancel, right away it tries to connect again and again and again, then stops and five minutes later it will connect again. I know this is long but I know how you all like enough info.Any thoughts on causes or solutions?
The phone is doing what AT&T (or your phone service) told it to do - constantly make sure that you have a connection to them. This will drain your battery somewhat. What you want is that it should DROP all connections unless you TELL it to connect.
I think that you want to search for Kaiser Tweak -(oh wait! you already have that program) you will notice that you can make the phone connect only when you have told it to - i.e. make an internaet connection or check email. You can have the phone drop the connection one minute after that.
Have you actually used the Kaiser Tweak program? If not you should use it first/next.
I believe that this will most likely solve your problem if I have understood it correctly.
(PS - I recommend that you use the SEARCH at the top of the forum before posting next time.)
Bill
denco7 said:
Having decided ...Any thoughts on causes or solutions?
Click to expand...
Click to collapse
Thanks Bill...... Already went thru Kaiser Tweaks and set every single setting to advised setting. Set all the connection settings to connect manually and to drop the connection after one minute. It wil not do either.Google is my friend. I have google searched this forum and have used forum search. In the past two days Mon. and Tues. I have read thru more than 2000 posts and wikis before I decided to start a new thread if I have missed something I am Sorry and would have appreciated a link to this information that I have missed. I have had the phone since last Nov. and have been pretty faithful in reading this and the HTC wiki and forum and cannot figure this out.
Sorry again, Denco