I have a XDA II here, It was work fine, but after I tap a file in the Windows folder, then my XDA softreset itself, after the XDA can still turn on, all button is functional, but just problem to tapping on screen, when tap on screen it has on repond (the screen is on).
I also tried hard reset but all data is still here, weird?? I though hard reset will let me go back to the default setting, but it doesn't change anything except the clock go back to Sept 2003.
PH10B
Radio 1.10.00
G 1337.18
D 1.60a00WWE
my problem with the screen is that it can not be alligned, everytime i try the cross goes round and round and it simply wont start. i have tried at least 6 different roms hard reset but problem remains :x :x
I NEED HEPL GRAHHHHHHHHHHH
PDA2 same problem
Hi All,
I have a PDA2 and for some reason tapping on screen stopped working, I tried hard reset too but I cant tap on the screen anymore. Kindly help. PDA is in super shape I have also upgraded it with the latest patch from clubimate but cant tap the screen.
Nothing is broken and it happened while I was typing a note. Pls Pls help
Qamar Bukhari
[email protected]
we should create a club and name it the fellows with the x-screens :x :x :x
Hey guys do something, where are the experts ??? I am sure its just software problem, I installed some software and next morning touchscreen was not working. I didnt dropt the pda.
Qbukhari.
Just a thought, try putting the device into bootloader mode then hard resetting the device.
Also try putting it into bootloader mode, updating the complete ORIGINAL rom and hard reset to complete the install.
Bootloader mode = power button + reset button + action button right ???
I have done so, problem still there
I have replaced the ROM downloaded from clubimate ----- problem still there
I have also tried to replace the XDAII rom ------ problem still there
now tell me where to get the ORIGINAL ROM ??? I am sure if the original rom is inserted it will be working again. btw pug can we talk online ? I am online now
[email protected] (msn messenger)
qbukhari.
hey all, I finally solve this problem, in the hard reset screen, there is menu for me to choose what to do in during the hard reset, like clear storage, registry... and i choose to clear all, then my XDA II is now work fine. (in the hardreset menu the backlight will not on, so it is not visible to find out the menu, also to change the setting use the botton of record, camera & volume button to control the menu.) good luck everyone!!
Thats a relief
Hi kindly tell me how to find that menu ?? I am sure I didnt damage my Alpine its just software problem let me fix it too.
Tell me how to find that menu during a hard reset plsssssssss
qbukhari.
WHERE IS THAT MENU??????????????
Menu ????
Still waiting for a reply, kindly tell me how to access "Clear Storage" function during the Hard Reset
qbukhari.
probably fake trying to make impression :?:
Too Sad
Dear Kabintos,
When you go in the setting/memory it is displayed total 122mb main memory in my PDA2 is this the same situation with you too ?
qbukharil.
The bootloader menu is not, as far as I'm aware, on the Alpine as it automatically detects network frequencies etc. Henrypak mentions XDA II not XDA IIi.
The program memory and so on in the Memory tab is only 122.04MB. Memory is quoted different to how most people think. 128000000 / 1024 / 1024 = 122.0703
The .03MB is taken up with partitioning of the memory to allow for storage etc.
Have a look at the hard drives on your computer for example, a 30GB hard drive is only 27.9GB. It's just how the manufacturers quote storage space, in thousands of bytes. Computers work them out in thousand and twenty fours of bytes.
To be honest Qamar, the more I think about your problem, the more I think it is a hardware issue, not software. If you've recently purchased the Alpine, it will still be under warranty and you should be able to take it back for an exchange. If not try opening it up and removing and reconnecting the ribbon cable for the screen from the mother board.
Obviously you've tried flashing it again, if the touchpad isn't working then you can't get past the screen alignment at the beginning of the ROM installation after a hard reset.
Out of curiosity, if the touch screen isn't working, how did you get to see the Memory status on your Alpine? None of the buttons are defaulted to settings or the start menu.
PDA2 live again
Hi All,
Well well well, here I am back in the game again. It was at the last moments when I was almost ready to send my Alpine for repairs when I got tip from a friend from uk. He sent me a tool to format storage completely.
After reseting the Alpine with reformatted storage the touch screen was back a bit misaligned though, after aligning it once its 100% fit now. How can I thank you my friend ???
Cheeeeeeeeeeeeeeeeers !!!!!!!!!!
qbukhari.
gbukhari pls send it to me m8 pls pls and ill thank you as you were thanking your firend that send it that to you :lol: also i wanted to ask you if you test really hard your machine after that in case it would do the same thing again
my email [email protected]
Can someone post a 100% tried and tested solution to the tapping problem?
TIA
Yeah...!
Can someone please post some instruction on sortingthis issuse out....
Lossing sleep over the thought of having to replace my screen.....
Cheers,
-R
Hi everyone,
I had exactly the same issue with my XDA2i about a week after I purchased it (around 3 months ago). I was happily browsing the web over wifi around a friends house when the screen locked. I had to hard-reset to get it up again but it got stuck in a loop whilst aligning the screen, it wouldn't go past this stage at all.
I phoned the online shop I bought the device from and they told me they had had lots of people reporting the same symptoms and that they had identified a faulty batch. I was sent a replacement from a new batch about 4 days thereafter. The new one has worked fine ever since.
If it is a software issue that's fixable, great, go for it. But if your device is still under warrenty I'd suggest getting a replacement - worked for me!
Sorry I can't be a bit more posistive but thought I'd let u all know.
*server duplicated post*
Hi,
I bought a secondhand Herald a while ago, it is 4 months and came with the original invoice. I been using it for 2 weeks and whas very happy. For me a big improvement over my Qtek 9000. I encountered a few times when opening/closing the slider that the phone goes into softreset, looks like a pover interruption. But then after using it in my car with TT6 the phone froze up, a soft reset brought back life but now it does no longer respond to the touchscreen. Advice from HTC helpdesk, do a hardreset. Hard reset done and gues what...to activate windows mobile please tap the screen...Still no response. Before the hardreset the phone whas working normally except for the touchscreen, now its a brik...
I read that other people had the same, softreset while opening/closing slider, anybody any idea? Of course It has to go in for repair under warranty, but if it turns out that the P4350 is not very reliable I will sell it.
Hmm...I just realized that I posted in the wrong Herald section... if any of the
forum guys could place it in the correct section?
Yves
I already own one of these and was getting one for a friend but I have problems....
The touchscreen works but the backlight wont come on. I have heard that it was upgraded to Windows 5 so it would work with Tom Tom6. It wasn't used much and there is a pic of it on ebay with the screen working....
So I am wondering what to do, as the battery would have run out in postage and I am wondering if the backlight turned off auto and can't be turned back on again!!! hmmm
all thoughts and help welcome!!!
(Do I somehow try to install a different operating system on like with my current one? )
First thing to do is switch it in and then while it is on Hold the power button down for 3 seconds as doing this once will set the backlight to off and again turns it on, failing that check the backlight sliders in settings. Failing that I would back it up and do a hard reset. LEDs can go on the screens but not often. You cant run WM5 on an XDA21 but TomTom 6 runs fine anyway on 2003se
yup did all of that, and dispite it saying 2i on the front its actually a himalaya so have posted there, looks like the lcd is damaged as i already tried what you suggested to no avail
also downloaded vjeschater programme and that didn't do it.
I then reimaged the rom to a previous version and that didn't do it so it must have been damaged in the post!!!
shame
so I have to wait for royal mail to cough up at least a portion of the cost....
Hi folks,
As the tittle tells, now and then when I close the keyboard from my herald it resets itself...Does not always happens, sometimes I cannot reproduce it, and sometimes it does it several times in a row...
This is my 2nd Herald, the 1st one did this also until the touchscreen failed. Got that one repaired under warrenty. While this one whas in repair, my wife bought me a 2nd one with a German Rom and this one has now been affected with the same bugg...?!
Its just out of warranty now...I guess I could start using the "spare" P4350 but it came out of warranty with a French keyboard and Rom, not really what I prefer...
So anybody an idea? Bad connection between the slider and the body or a problem on the mainboard?
It seems that nobody has experience with this "problem"?!
Well, for me its simple...its my last HTC phone...2 phones who have the same problem, no thanks!
If it gets worse I will give it a hard reset with a hammer, that will solve it for once and for all...
I have a tmobile wing that had the same problem. turns out that after 20 or so times in a row, I decided to figure out what was happening, that it was the battery not making good connection. and closing the keyboard would cause the battery to jar loose for a split second and loose power. I cleaned the battery and the phone terminals and mine hasn't done it since . hope this helps
I've had that problem before with other HTC devices (wizard / Tmo MDA) ... I ended up just getting an exchange.
i've also had this problem with my herald. I fixed it with this file, I think you know how to use it...
file
This file is an Rom...If this would solve the problem I prefer to flash it with an official Rom from HTC...but why would it run fine for a year if its a Rom problem?
Hi!
i am new here, and i do have a problem.
I have my HTC Diamond since 2 weeks, and it is blocking (freezing) once per day: the device is on standby, i try to turn it on, but nothing happens, always a black screen, not even the restart button works; the only solution is to remove and put back the battery.
the issue is that if someone calls me during this "freeze", he gets that my phone is ringing; but i get nothing; and not even a missed call after i succeed to turn it on.
- ROM version: 1.93.479.3 WWE
i highly appreciate if somone can help me with this problem.
thanks,
Tony
htc diamond freezing with white screen
Hi,
i have a similar problem - but not so often (approx. 2 times per week). The difference to yours is, that my screen is white (or gray/dither). My firmware Version: 1.93.407.1 GER (there is no newer)
Have you found any solution?
Guys....have a troll thru the Diamond section......you should find the soln there.....
http://forum.xda-developers.com/forumdisplay.php?f=428
Moved to Diamond/Diamond..
Me too.
Panosha: 1.93.405.1 WWE Shine On 2.4 Full
Radio: 1.03.25.18
After calls... Freezes 80% or more. I don't know if maybe it is 100% of the time when the other end hangs up first. (I don't get it with Voicemail!)
I also get freezes some other times. I don't think it is memory related, (before someone suggests it.) Also Please don't tell me to Hard Reset. I have Hard resetted to my heart's content, also directly after every Rom Update (to get GPS working)
Tony1313 said:
Hi!
i am new here, and i do have a problem.
I have my HTC Diamond since 2 weeks, and it is blocking (freezing) once per day: the device is on standby, i try to turn it on, but nothing happens, always a black screen, not even the restart button works; the only solution is to remove and put back the battery.
the issue is that if someone calls me during this "freeze", he gets that my phone is ringing; but i get nothing; and not even a missed call after i succeed to turn it on.
- ROM version: 1.93.479.3 WWE
i highly appreciate if somone can help me with this problem.
thanks,
Tony
Click to expand...
Click to collapse
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.