Hi,
someone knows how to disable the temp lock?
To protect your device with a password
1. Tap Start > Settings > Personal tab > Lock.
2. Select the Prompt if device unused for check box, and in the box to the right, select how long your device must be idle before a password is required. In the Password type box, select the type of password you would like to use. Enter the password and, if necessary, confirm the password.
If your device is configured to connect to a network, use an alphanumeric password for increased security for your device.
But i don't want any lock!
Can someone help me out?
/Dc
locks like is a exenche rule from my company
but will be possible to disable or need to be desable on exenche rule...
Related
Hi , from modaco's forum , here's the trick:
Desktop PC settings (Control Panel):
1. Enter Network Connections
2. Create a new connection
3. Select 'Set up an advanced connection', click next
4. Select 'Accept incoming connections', click next
5. Click next on 'connection devices' screen
6. Check 'Allow incoming VPN connections', click next
7. Select all users which will be using this account
PPC settings:
1. Go to Settings/Connections/Connections
2. Select 'ADD A NEW VPN SERVER CONNECTION'
3. Enter the IP Address of your PC or its network name, select IPSec/L2TP and click next
4. Choose 'A pre-shared key' and enter some number combination (ex: 123456)
5. Enter user and password of desktop computer.
6. You're finished, enjoy!
Note: in case you have a firewall installed on the computer, you will need to change Activesync rules in firewall settings to allow connections to all IP addresses to default 169.254.2.2 address.
Pay attention that your PPC is setup as MY ISP/Work in CONNECTION settings
(haven't tried yet :? !)
I use PIE and I want to login at www.hotmail.com to check my email (because with my telecom provider I need to use a proxy server to get on the internet, so I can’t use Windows Live), but every time I get the message: please enable cookies. And then the Windows live website gives an example how to enable cookies for IE 6 and firefox… So probably Microsoft doesn’t even recognizes his own PIE?!?
I get this message after I filled in my username and password and click on the login button.
Btw, I already activated the option “allow cookies” in PIE.
Can you login at www.hotmail.com using PIE (WM6)?
If yes, what settings do I have to apply?
I have just upgraded from a DIAM 100 to a 130 so now 3G works beautifully.
However my mail set up fails to synchronise (both bigpond and windows live).
It will work on wifi but will not work otherwise (full 5 bars reception and internet does work.)
I figured it must be the settings for my telstra internet/wap setting however when i go into connections, it tells me that this is preconfigured and cannot be modified.
So has anyone else had this problem and how did you fix it.
I have wasted several hours of on hold to Telstra so I thought I would ask this forum first.
I have searched the fora without success for this problem.
Many thanks
thedoc said:
I have just upgraded from a DIAM 100 to a 130 so now 3G works beautifully.
However my mail set up fails to synchronise (both bigpond and windows live).
It will work on wifi but will not work otherwise (full 5 bars reception and internet does work.)
I figured it must be the settings for my telstra internet/wap setting however when i go into connections, it tells me that this is preconfigured and cannot be modified.
So has anyone else had this problem and how did you fix it.
I have wasted several hours of on hold to Telstra so I thought I would ask this forum first.
I have searched the fora without success for this problem.
Many thanks
Click to expand...
Click to collapse
Flexmail for the win!
I have exactly the same problem. I'm assuming the Teltra ROM is locked down and you can't do much with it.
The problem is the proxy settings, don't enter them and you will be able to use msn and email, but you will loose access to the "free to browse" Telstra pages
Copied from http://configure.telstra.com.au
1. On the handset, tap on the Start button.
2. Tap on Settings.
3. Tap on Connections tab.
4. Tap on Connections icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Telstra Internet in the Enter a name for the connection field.
7. Select Cellular Line (GPRS, 3G) in the drop down list under Select a modem.
8. Tap on Next.
9. Enter telstra.wap in the Access point name field.
10. Tap on Next.
11. Enter a username in the User name field or otherwise leave it blank.
12. Enter a password in the Password field or otherwise leave it blank.
13. Tap on Advanced.
14. Select Use server-assigned IP address.
15. Tap on OK.
16. Tap on Finish.
17. Tap on Set up my proxy server under My Work Network.
18. Make sure that This network connects to the Internet and This network uses a proxy server to connect to the Internet are checked.
19. Tap on Advanced.
20. Tap on HTTP.
21. Enter 10.1.1.181 in the Server field.
22. Enter 80 in the Port field.
23. Tap on OK three times.
Fix in Advanced Server Settings
I had this problem and fixed pretty easily by going into email inbox tab, then press menu / tools / options then tap an account to change its settings. click 'edit account setup' press next a couple times until you get to a page with "Advanced Server Settings" down the bottom in blue. click on that and change the network connection box from 'The internet' to telstra internet. click done and next til the setup is finished and you should be able to get your mail over the 3G connection
I copied and posted my original post via the nexus thread. i thought i'd repost it here since i'm guessing some of the other note users may have done this too. Any help would greatly be appreciated. Please note that I got the app to work with my stock rooted rom. Now i'm just trying to get it to work on any wifi network as opposed to just my home wifi network.
Originally Posted by colbyrainey View Post
Sure!
1. Install CopSSH for Windows from here:
http://sourceforge.net/projects/sere...r.zip/download
2. Extract the .exe file from .zip file and run the setup. During the setup, you will be prompted for a username and password, make sure you specify this and make it something you can remember (you will need it later).
3. Activate a user by going to Start->All Programs->CopSSH->1. Activate a User. Select the user you just setup in step 2.
4. Type in and confirm a passphrase (make sure you remember this). Then click activate.
5. Now you need to allow an port exception through your Windows Firewall. Standard SSH port is port 22, so that's what I used. You can do this by going to your control panel, selecting Windows Firewall, and click "allow a program through Windows Firewall."
6. Select Add port...name it SSH and enter port 22.
7. Click change scope...and make sure the radio button that says "Any computer (including those on the Internet) is selected. Click OK.
8. Now we need to setup port-forwarding to your router. To do this you need to know how to access your router, your WAN IP address, and your LAN IP Address assigned by your router.
9. To find out your LAN IP address, open a command prompt and type in "ipconfig -all". Typically, it will begin with 192.168 unless you have modified your LAN settings. To find your WAN IP address settings, google "what is my IP address?" There are a number of sites that can tell you that.
10. To access your router, you need to find it's IP address, which is usually 192.168.1.1 or 192.168.0.1; you will know by entering one of those addresses in your browser and it will prompt you for your login info. If you don't know your user name and password, I can't help you there but Google may be able to (try to look-up the default username and password for your router model).
11. Once logged in, find your "virtual server" or "port forwarding" settings, specify port 22 - 22 for the start and end range, and route it to the LAN IP address you found in step 9. Save your settings and exit your browser.
12. If you've made it this far, your SSH service and port forwarding settings are done; now you just need to log into it. Download SSH Tunnel from the Google Play Store.
13. When you open it up, it will ask you for a number of settings. I have listed them below and what you need to enter in each textbox:
- Host Name: Enter your WAN IP address that you discovered in step 9.
- Port: Enter "22"
- Username: Enter your username you specified in CopSSH
- Password: Enter your password you specified in CopSSH
14. Make sure the following options are checked:
- Use socks proxy
- Global proxy
15. That's it! Now scroll to the top of the app and check the first checkbox labeled "tunnel switch" and it should connect you.
Please keep in mind that you need to be logged into a wifi connection, but it doesn't have to be your home wifi connection!
DON'T forget the thanks button!
Lkrfn5283:Thank you for this post. I'm unsure what i'm doing wrong but i went over the instructions and made sure i did everything correctly, but it keeps saying "error: cannot connect to host" I'm using a tmobile galaxy note with a stock rooted ics rom. This write up should apply to any phone with an ics based rooted rom correct? any help would greatly be appreciated as i'm completely lost on what i did wrong.
*note: on step 11 it shows two areas where you can enter the IP address and start port/end port. One is labeled "internal" and the other is labeled "external". On the internal i input my WAN IP and ports starting and ending in 22. On the external I input the remote address and the local port/remote port as the starting and ending ports given by the sshtunnel app.
i recently upgraded to MM, and now cannot disable my pin unlock. can enable and disable fingerprint, but it still asks for my pin. just want to go back to the standard swipe method.
the option is greyed out with the message "Disabled by Administrator, encryption policy, or credential storage"
tried...
clearing trusted credentials.
unchecked everything in device administrators.
any ideas? thanks.
I've got the same problem!
Same problem here