I need help!! - Wing, P4350 Herald Upgrading

Can anyone help me in Installing anything better then the Official T-Mobile RUU i have the SPL 4.70.Yang i dont know what that means but yeah lol so if anyone has the time and patience plz help me

davenumber said:
Can anyone help me in Installing anything better then the Official T-Mobile RUU i have the SPL 4.70.Yang i dont know what that means but yeah lol so if anyone has the time and patience plz help me
Click to expand...
Click to collapse
Read This ---> Flashing Guide

davenumber said:
Can anyone help me in Installing anything better then the Official T-Mobile RUU i have the SPL 4.70.Yang i dont know what that means but yeah lol so if anyone has the time and patience plz help me
Click to expand...
Click to collapse
Ok You aren't the first mate . There is a sweet rom by itje which i have tested and used. I also added a small little how to it on this thread of his. So you may want to go there. And the rom is very sweet.
http://forum.xda-developers.com/showthread.php?t=374020

I have tried the Flashing guide...
I have tried The Flashing guide but it doesn't really help.

davenumber said:
I have tried The Flashing guide but it doesn't really help.
Click to expand...
Click to collapse
Did you goto the thread I posted ?

YUP
YUP right now i am downloading the rapidshare file but i hope i can figure it out

davenumber said:
YUP right now i am downloading the rapidshare file but i hope i can figure it out
Click to expand...
Click to collapse
Well I tried to make it as simple as possible mate. And pretty much the rom by itje is as simple to use as possible.

I've always thought USPL sounded easier than a Hard-SPL. I just have the Flash Center on my desktop and change out the files in the RUU folder for new ROMs I want to try (On my second ROM now).
And don't forget David's Herald to Wing KB fix. David's pretty much a god to Wing users for the most part.
a. USPL
Step 1. Download Herald-USPL-Beta3.
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
Your screen on your cell phone will go white around the 75% part of the "second step" now.
ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Click to expand...
Click to collapse
http://www.megaupload.com/?d=A4N36HLO
There's the link for a USPL.
Then pick out a ROM (I also suggest Touch-IT Vista, who needs a dull grey theme when you can have colors) and extract the contents to the RUU folder in the USPL's folder. Then run the exe in the USPL's folder.
That's pretty much how I do it, and follow the on screen steps.
Oh and make sure you're connected via ActiveSync 4.5 and NOT on Vista (I've never had success in Windows Vista).

7on said:
I've always thought USPL sounded easier than a Hard-SPL. I just have the Flash Center on my desktop and change out the files in the RUU folder for new ROMs I want to try (On my second ROM now).
And don't forget David's Herald to Wing KB fix. David's pretty much a god to Wing users for the most part.
http://www.megaupload.com/?d=A4N36HLO
There's the link for a USPL.
Then pick out a ROM (I also suggest Touch-IT Vista, who needs a dull grey theme when you can have colors) and extract the contents to the RUU folder in the USPL's folder. Then run the exe in the USPL's folder.
That's pretty much how I do it, and follow the on screen steps.
Oh and make sure you're connected via ActiveSync 4.5 and NOT on Vista (I've never had success in Windows Vista).
Click to expand...
Click to collapse
I hope you are enjoying the roms here. Also leave a description of how the roms you tested work for you . It helps others and the builders as well.

Related

How do I downgrade from WM5 back to WM2003SE

Found 2003SE ugly but at least useable. WM5 just runs too slowly for me. Do I just need to follow the 1.42 Rom flash tutorial on the wiki to reflash my existing Rom or are there specific steps that need to be done beforehand?
I changed the EXT Rom to 128K as per instructions for WM5 installation will this affect any reversal process?
Thx.
Hi
Yes, you have to do it 'special' way.
Just tell me why haven't you found this wiki page ?
Follow the process carefully.
There are bunch of people stuck with improperly downgraded devices (no risk though... they simply don't know how to repair it)
Good luck
robal said:
Just tell me why haven't you found this wiki page ?
Click to expand...
Click to collapse
Stupidity I guess Thx for the link btw. Maybe I'll try the keyword "downgrade" in the find page box of Wiki
I found a problem on this page... this link http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades its not working for me. And I wat to download the official ROM for me SX66 (XGULA001)... Does anyone knows an alternative?
Dankan_ said:
I found a problem on this page... this link http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades its not working for me. And I wat to download the official ROM for me SX66 (XGULA001)... Does anyone knows an alternative?
Click to expand...
Click to collapse
The roms located at
ftp://ftp.xda-developers.com/BlueAn...ates/PH20B1_Siemens_13310_110_10210_WWE_SHIP/
rschell Really thanks!
Justa one more question... It´s just put the device in boot loader mode and run this? My quetsion its becaus the ROM there is in .exe format...
Dankan_ said:
rschell Really thanks!
Justa one more question... It´s just put the device in boot loader mode and run this? My quetsion its becaus the ROM there is in .exe format...
Click to expand...
Click to collapse
Just execute the .exe, if you are lucky you won't get any county or model errors, but I doubt it. If you get errors, you will need to follow the instructions by cdaly1970
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
the temp directory in XP is under is something like C:\Documents and Settings\Userid\Local Settings\Temp\xxxxx.tmp
rschell said:
Dankan_ said:
rschell Really thanks!
Justa one more question... It´s just put the device in boot loader mode and run this? My quetsion its becaus the ROM there is in .exe format...
Click to expand...
Click to collapse
Just execute the .exe, if you are lucky you won't get any county or model errors, but I doubt it. If you get errors, you will need to follow the instructions by cdaly1970
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
the temp directory in XP is under is something like C:\Documents and Settings\Userid\Local Settings\Temp\xxxxx.tmp
Click to expand...
Click to collapse
If you use winrar you could extract that exe so you don't have to go to the temp dir
YESS !!! I think everythink is already on WIKI

what am i doing wrong

ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
when did you buy your wing???
and are you using flashcenter ?? so it can temporary cid unlock the device?
i got my wing in feb or march 08. yes i do have flash center, and i have used it w/o problems before. i have flashed from touch it to open touch and one of aserg's roms too. i have been using OT 4 lite black for weeks now. i have been watching the threads about the new OT 5. so i downloaded it and nothing new is flashing.
does this help any?
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
ttran i'm honored!
ttran001 said:
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
Click to expand...
Click to collapse
iwas hoping not to bother any of the main guys with this little problem, but i'm glas your here (love your OT's btw ). ok, i am using the standard activesync method.
heres what i do:
1. download new rom and put it inside my RUU folder on my computer's C drive.
2. run the herald-uspl.exe.
3. follow the prompts
thats all i do and it used to work. i don't know if this helps, but it's the only other thing i have been doing diff. on another thread i asked if it was ok to delete old roms out of my RUU folder. i actually removed my OT v4 lite black and then put the OT v5 UL and ran the uspl. do you think thats what it is? maybe you have to have your old version in the RUU before you flash to a new version?
hope this helps
No. You don't have to have anything but your newest ROM in the RUU folder. When flashing, the phone doesn't know or care what you currently have flashed, unless that ROM is causing problems with your active sync. If that's the case, place your phone into bootloader mode, install the stock ROM (unless you have a HardSPL phone, and it sounds like you don't since you're using USPL.) Then boot up the ROM and run the USPL.
ok, so now know what to do, but why did this happen? whats wrong with the herald-uspl?
i just checked my device info and it says im running open touch v3! i thought that i was using v4. i have hard-spl downloaded, but i dont know if i need to use it or not. should it? then try to flash?
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
shep211 said:
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
Click to expand...
Click to collapse
OK, i'll give it a try
Link to unlock phone software and howto
http://forum.xda-developers.com/showthread.php?t=358225
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
dougstoner said:
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
Click to expand...
Click to collapse
actually, here is exactly whats in the RUU.
i hope it helps
Ina Weetald
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
digitalknoll said:
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
Click to expand...
Click to collapse
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
it looks really sweet!!!!
dougstoner said:
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
Click to expand...
Click to collapse
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
digitalknoll said:
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
Click to expand...
Click to collapse
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
dougstoner said:
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
Click to expand...
Click to collapse
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
The HardSPL makes it so that if you flash a bad flash, you don't have to flash into the Stock RUU again just to get a working activesync connection to be able to flash again.
Courtesy of Ivanmmj
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
Hey, I was scared for a LONG time to do it...I read so much info before I finally decided to do it! It took me like 2 weeks of reading before I decided. It's an EXTREMELY simple process. Plus, it makes flashing easier. I was getting weird errors trying the USPL method sometimes. Anyway, just do this.
FIRST, make sure your IPL number is atleast 4.000 or higher. You can check this by holding the camera button down, and then doing a soft reset. HOld the camera button down till you enter the bootloader menu. (It's like 3 gradient colors).
If it's higher, great, you are ready to proceed.
Next, download this file.
http://rapidshare.de/files/38148213/...l_WM6.rar.html
Unzip it, and it will contain 3 .cab files you need to install in a certain order.
1. Install canonyang.cab
2. Next, aserpolicy.cab
3. disablesecurity.cab.
Do a soft reset.
Put phone in flight mode!!!!
Now, go to the folder you just unzipped that file from. I think the default folder will be called hard-splwm6 or something like that. Go and run the RUU.exe file in it. Just follow the instructions. The screen of your phone will go white, but just wait, wait, and it will reboot itself.
Presto, you are hard spl, and can load whatever rom you wish!

P3600i SUCCESSFULL FLASH OF WM6.1 (includes instructions)

*** UPDATED TO MAKE A LITTLE MORE CLEARER *** Please do not ask for screenshots - time does not allow me to do it)
Thanks to Olipro, and some digging on my part (I just needed to dig around to figure out how)
Step 1 - Anyway First of all, load the Hard SPL to your phone from : http://forum.xda-developers.com/showthread.php?t=398742
Now, as stated in the first post at: http://forum.xda-developers.com/showthread.php?t=328147, we need to re-build the nbh file with a 401 tag rather than a 400 tag.
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
----------------------------------------------
because the rom package doesnt know about differences in the p3600i bootloader, it cant jump to the correct bootloader and as such you will not be able to flash until you have got the new SPL from olipro installed, and running on the device - to do this, make sure step 1 has completed, then:
restart the phone by holding the power and camera buttons down and pushing the reset button simultaneously.
it should reboot into the 3 color band boot loader mode.
run the romupdate utility found in step 2
go to http://forum.xda-developers.com/showthread.php?t=398742 and click on the "donate" button for olipro, and donate.
make phone calls.
Thanks
http://whats.cool.net.au
THEORETICALLY This should work with any trinity rom BUT
This method should work with any trinity rom. although it does not seem to work with Trinity WM6.1.Black Edition.OS Version CE 5.2.19701 Build 19701.1.0.2 by Akeo, nor the Elegance 6.1 rom - upon reboot I just get grey/white banding across the screen and it wont start.
One thing to note is that 1st boot seems to take ages, but after that it works great.
ajajaj said:
This method should work with any trinity rom. although it does not seem to work with Trinity WM6.1.Black Edition.OS Version CE 5.2.19701 Build 19701.1.0.2 by Akeo, nor the Elegance 6.1 rom - upon reboot I just get grey/white banding across the screen and it wont start.
One thing to note is that 1st boot seems to take ages, but after that it works great.
Click to expand...
Click to collapse
Well done. Pity it doesn't work with Black Edition by Akeo. That is a nice ROM and I would love to use it.
I really don't want an Ultra-lite ROM....I want something with all the trimmings.
Now we need a few ROM Cookers to come up with some good stuff for the P3600i.
I cannot for the life of me get the Hard SPL to complete using Vista.
I have gone through the process of putting the XP drivers on as per the Trinity Guide...not real sure why the phone needs to be in Bootloader mode for this, but I followed the instructions to a tee.
Where am I going wrong....I end up with error 260.
I will search again and see what turns up in the meantime.
Edit: I think I will try it from my Laptop tomorrow, it runs XP so I will see how that goes.
Andych said:
I cannot for the life of me get the Hard SPL to complete using Vista.
I have gone through the process of putting the XP drivers on as per the Trinity Guide...not real sure why the phone needs to be in Bootloader mode for this, but I followed the instructions to a tee.
Where am I going wrong....I end up with error 260.
I will search again and see what turns up in the meantime.
Click to expand...
Click to collapse
no good on Vista eh? not surprised... we can try using the Polaris RUU, for the flash, I bet you anything that'll do the trick.
Olipro said:
no good on Vista eh? not surprised... we can try using the Polaris RUU, for the flash, I bet you anything that'll do the trick.
Click to expand...
Click to collapse
Yet one of the others says he did it OK on Vista....so buggered if I know....maybe I was holding my head the wrong way.
I will try it on XP tomorrow....hopefully once the Hard SPL is on there Vista will not be an issue any more.
NBHUtil is better for repackaging NBH files really... I'll attach my latest build with support for the P3600i shortly
OK...this may be a really dumb question (so I expect offensive answers) but why does the standard HTC WM6 ROM work for both D810 (128 meg ) and P3600i (265 meg )......yet the cooked ROM's which work on the D810 won't work on the HardSPL P3600i????
Just trying to get me head around it logically.
ajajaj said:
Thanks to Olipro, and some digging on my part (I just needed to dig ar would u like to add screenshut part by part? it'll looks more easy for all
Click to expand...
Click to collapse
thks Olipro, you're the man.
Andych said:
OK...this may be a really dumb question (so I expect offensive answers) but why does the standard HTC WM6 ROM work for both D810 (128 meg ) and P3600i (265 meg )......yet the cooked ROM's which work on the D810 won't work on the HardSPL P3600i????
Just trying to get me head around it logically.
Click to expand...
Click to collapse
the rom is the same, it is just that it gets put in a different place for the p3600i (401, instead of 400)
this is why the ruu_signed.nbh file needs to be rebuilt.
Andych said:
I cannot for the life of me get the Hard SPL to complete using Vista.
Click to expand...
Click to collapse
there is a guide to installing vista drivers that works - main thing is to get the phone into bootloader mode, delete the drivers and install the other ones.
thats all I did.
Tried that...didn't work for me but I will try from XP today sometime.
ajajaj said:
the rom is the same, it is just that it gets put in a different place for the p3600i (401, instead of 400)
this is why the ruu_signed.nbh file needs to be rebuilt.
Click to expand...
Click to collapse
Then theoretically it should work on all cooked ROM's so long as the ruu_signed.nbh file is re-built.
I know....theoretically doesn't always relate to does...
OK well at least I have had my curiosity sated....for now.
maybe it's just me, but i can't get this to work. i've followed the instructions but i get stripes across the screen after the update. i don't think i am patching the image correctly. i'm using the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite rom as mentioned here and getting nowhere. would i be crazy in asking if someone could post a link to a pre-patched ROM that i can install?
any help is greatly appreciated
I had tried a few times one 2 mechine
one on winxp and one on win2k3
but both mechine show the same error when i do the step 1
the phone go to 3 color but in pc side it shows the ERROR [260] message
don't know how to do ><
try to flash my CHT9110 follow the instruction of ajajaj (thks) on Vista. Hard spl of Olipro ater several try now OK. boot loader TRIN100 IPL-1.00 SPL-3.2.Olipro but after i flash WM6.1, i got #226 FLASH WRITE. (alredy change nbh to 401 as instruct)
what should i do, need help urgently
Hi all,
tried to make the new rom as instructed, but the new nbh file output is approx. 100mb while the original nbh is approx. 40mb... does this make sense?
other than that, when i tried to flash my p3600i, the rom update utility is stuck on 15% for more than 1 hour!
can anyone point me to where i can download the original p3600i rom in order to "heal" my device?
10x
amanx said:
I had tried a few times one 2 mechine
one on winxp and one on win2k3
but both mechine show the same error when i do the step 1
the phone go to 3 color but in pc side it shows the ERROR [260] message
don't know how to do ><
Click to expand...
Click to collapse
I get the 260 Error on both XP & Vista.
after several time...i got pass all flash porcess "congratulation" but my CHT9110 got stuck in boot screen...
pls give me any advise ajajaj?

New in flashing cooked roms - HELP

I will do it for the first time - Dutty's 1.8 ROM. I don't know the tools etc,...
Can someone help me how to do it and how to save original rom.
Thanks
Dave
Surfer_D said:
I will do it for the first time - Dutty's 1.8 ROM. I don't know the tools etc,...
Can someone help me how to do it and how to save original rom.
Thanks
Dave
Click to expand...
Click to collapse
Well first i dont really know how to save the original ROM but don't worry. The most of the original ROMs are available at the blackstoneWIKI so you can check if your version is listed before flashing.
When it comes to the flashing itself it's really easy. First of all download USPL from this site. Then you download the ROM you want to flash with. If the ROM is named nbhsigned.nbh you will want to change this to BLACIMG.nbh and if it's already named BLACIMG.nbh just leave it like that. Then you copy BLACIMG.nbh to the root of your storage card (the main folder). Then you go to activesync->connection settings->disable USB connections.
Now turn the phone off and remove your storage card. Enter bootloader mode by pressing PowerON and volDOWN simultaneously. When your in bootloader mode wait for the text "serial" at the bottom to change to USB. When it says USB you insert your storage card. After that you run blac_uspl in the USPL folder you downloaded. The phone will now restart and come back in USPL bootloader mode. USPL will update and recognize BLACIMG.nbh in your storage card and it will ask if you want to update. Press yes and your good to go.
You should backup all your important files before flashing and remember this way of flashing isn't 100% secure and I can't assure you that you're phone won't break, but following these steps closely really should narrow down the risks with flashing by alot.
Hope this helped you!
Thank you! This helped me too Can i do it with Windows 7?
Thanks friend, I tried it but I'm having a little difficulties When I use the tool I et an error message about USB - it can't find the phone.
Any ideas?
I did as you wrote and it worked till I used the EXE tool. There nothing happenes. I downloaded the latest version, but I0m using Vista. Acording to post where I downloaded it it should work on Vista.
Thanks for everything
Dave
First dump your rom using the method described here:
http://forum.xda-developers.com/showthread.php?t=427507
After that's done flash HardSPL described here:
http://forum.xda-developers.com/showthread.php?t=431217
A littlebit of reading wouldn't hurd you I think.
Also in Dutty's thread the procedure is well described how to flash so why open a new thread?
Surfer_D said:
Thanks friend, I tried it but I'm having a little difficulties When I use the tool I et an error message about USB - it can't find the phone.
Any ideas?
I did as you wrote and it worked till I used the EXE tool. There nothing happenes. I downloaded the latest version, but I0m using Vista. Acording to post where I downloaded it it should work on Vista.
Thanks for everything
Dave
Click to expand...
Click to collapse
Thanks Leo for the step by step
@OP, please read/search the sticky posts, wiki, ROM thread (and the rest of the forum if need be ) before starting a new thread.
Thread closed as per forum guidelines,
Dave

Here Is How To Update WP7 NoDo Update ROM Without Gold Card

FOLLOW THIS AS IT IS THEN U BE UP AND RUNNING WITH "WP7 NoDo Update" IN NO TIME:::
1> Look for a file called RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
2> Look for this file called RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
3> Download the ModelID.fig file from this link (http://rapidshare.com/files/451734900/ModelID.fig)
4> Extract the RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar (That u downloaded to a folder using 7-zip or whatever (I use 7-Zip 9.17 BETA-2010-10-04))
5> Extract the RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE (That u downloaded to a folder using 7-zip or whatever (I use 7-Zip 9.17 BETA-2010-10-04))
6> Now paste the ModelID.fig that u download from the rapidshare link into the RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE folder that u extracted the files to
7> Now put your phone in bootloader mode, plug it to your computer and be very sure that it shows u or displays USB
8> Open the RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar folder and run ROMUpdateUtility file, it MUST be the exe file NOT the cfg file (Confirm this very well)
9> Follow the on screen prompt
10 When it is all done to 100% your phone will be in bootloader but your computer will show ERROR [270]: UPDATE ERROR
11> From your computer click on Exit
12> Open the RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE folder and run ROMUpdateUtility file, it MUST be the exe file NOT the cfg file (Confirm this very well)
13> Follow the on screen prompt as well
14> Now just sit and relax and watch it counting up to 100% (lol)
15> Your phone will then restart and Hurray U are done
16> Now from here u should know what to do
Dont 4get to leave your COMMENT(S) and say THANKS and also click on the THANKS - Afterall it cost u nothing
PEACE!
PEACE!!
PEACE!!!
anyone try this out yet?
Thanks for the useful tutorial.
second_east said:
Thanks for the useful tutorial.
Click to expand...
Click to collapse
Glad I Put Smile On Ya Face
PEACE!!!
pinoypayter said:
anyone try this out yet?
Click to expand...
Click to collapse
Here is the start of those that tried it
http://forum.xda-developers.com/showthread.php?t=984902&page=15
And read page 16 as well and keep going on and on
After that go read the page 33, as to the last post i posted there
PEACE!!!
I've learned about this method after I flashed the original NoDo ROM. And now I can't get pass thru it anymore. I mean, whenever I try to flash other ROMs I'm always stuck with "NO VENDER ID".
Another thing, if ever I get pass thru this, how do I extract the NoDo ROM since its an exe file?
I have the NoDo ROM right now.
I hope I'm making any sense.
PS
The tutorial is great by the way.
worked on mine first time
thanks for sharing
biernes_atrece said:
I've learned about this method after I flashed the original NoDo ROM. And now I can't get pass thru it anymore. I mean, whenever I try to flash other ROMs I'm always stuck with "NO VENDER ID".
Another thing, if ever I get pass thru this, how do I extract the NoDo ROM since its an exe file?
I have the NoDo ROM right now.
I hope I'm making any sense.
PS
The tutorial is great by the way.
Click to expand...
Click to collapse
Please, try to read that again slowly then will see what i said u should use to extract.
Thanks
PEACE!!!
ClashOfThe said:
worked on mine first time
thanks for sharing
Click to expand...
Click to collapse
Glad I Put Smile On Ya Face
PEACE!!!
Does the process described above work on a US version of the T-Mobile HD7?
rdilallo said:
Does the process described above work on a US version of the T-Mobile HD7?
Click to expand...
Click to collapse
I dont know cuz I am in the UK.
PEACE!!!
And if our device is not from O2?
Should we use a ROM (the 1st from the tutorial) for our device insted of the O2?
Another question: is the RADIO frequence the same for all the region? Like, I have an ASIAN TMOB that I use here in Brazil. If I flash an European ROM, will it still works with my carrier (TIM)?
[]'s
Cris
cpimentel said:
And if our device is not from O2?
Should we use a ROM (the 1st from the tutorial) for our device insted of the O2?
Another question: is the RADIO frequence the same for all the region? Like, I have an ASIAN TMOB that I use here in Brazil. If I flash an European ROM, will it still works with my carrier (TIM)?
[]'s
Cris
Click to expand...
Click to collapse
Sure if the O2 one didnt work for u, do read to know what i said the first ROM will do after flashing, so if u have a ROM that can do that that is not O2 then go ahead
Yes it will
PEACE!!!
ClashOfThe said:
worked on mine first time
thanks for sharing
Click to expand...
Click to collapse
Have you tried to rollback to your previous ROM? Just for test purpose?
cpimentel said:
Have you tried to rollback to your previous ROM? Just for test purpose?
Click to expand...
Click to collapse
Yeah!!! U can roll back
PEACE!!!
rdilallo said:
Does the process described above work on a US version of the T-Mobile HD7?
Click to expand...
Click to collapse
the same question
cool1fish said:
the same question
Click to expand...
Click to collapse
nope, unlucky us, we need to do it with goldcard
1> Look for a file called RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22 .33a.50.10U_Signed_by_ansar (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
i can't find it anywhere!!!
can you give me a link ,tks
cool1fish said:
1> Look for a file called RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22 .33a.50.10U_Signed_by_ansar (Then download it, dont ask me 4 it cuz i wont upload it for some reasons but it is out there somewhere)
i can't find it anywhere!!!
can you give me a link ,tks
Click to expand...
Click to collapse
Here your links: http://www.multiupload.com/T4VW5DPQB2
this method not work on HD7 T-MObile =(

Categories

Resources