im going to sound like a complete idiot asking this question so please forgive me, i was reading the faqs and it said to flash a NBH file i need SPL 4.0 or higher... how do i find out if i have spl 4.0 or higher?
please forgive me i know its a dumb question... im just new to all this stuff
You need to go into your phone's bootloader....
to do so, you have to soft reset while holding down the camera button. Press the camera button and keep it pressed while poking the stylus thru the hole on the left side of the phone under the volume slider. You'll come to a tri color screen that will display the IPL/SPL information.
Related
Hi, I need some help.
I have a S730 without HardSPL. I understand that I can only flash it with signed original ROM from HTC. Does anyone know if there is anyone to download? I really need to get one on it because I can now get into my phone right now because of keyboard layout problem. Can't even unlock it to get activesync connection.
Stupid me, why didn't I applied the HardSPL completely.
/Chrille
You may use the Hardreset:
Phone off;
Press+hold both Softkeys (the ones on Display-bottom, left and right to the direction pad);
While holding Softkeys->Tap the Powerbutton (Only a short tap,dont hold the Powerbutton!Otherwise the Phone Boots normal...)
->a black Screen with one Question appears;Press 0 if you want to restore FactoryDefaultSettings...
This may help...
arpy said:
You may use the Hardreset:
Phone off;
Press+hold both Softkeys (the ones on Display-bottom, left and right to the direction pad);
While holding Softkeys->Tap the Powerbutton (Only a short tap,dont hold the Powerbutton!Otherwise the Phone Boots normal...)
->a black Screen with one Question appears;Press 0 if you want to restore FactoryDefaultSettings...
This may help...
Click to expand...
Click to collapse
It worked finally. I pushed the power button to long in my desperate attempt to hard reset.
You saved me, thanks a lot
/Chrille
AFTER i put in the new rom 1.93 my screen got a small shaking or a bit flashing but normal again when i press the power button to sleep and on it back . it there problem with my vga screen?
reflash original SPL or use Hard-SPL 1.40
i did a search where can i find the original SPL or use Hard-SPL 1.40
Same for me, but what does it matter if it clears with one power on/off? I won't be reflashing anything in a hurry to correct it unless it decides to get worse. For me it was after flashing usnsigned hard spl. It rattled my nerves.
help me
my wiza200 is totaly dead
i downgrade it to 1.01 than i write spl of 3.08 and that is the big mistake i have every done..
so my phone is not power on or not go to bootmode
what to do now
any one have any solution?
please help
or is there any way to start phone is bootmode???
Yes there is a way.
I took the following from the Wizard Wiki
''To go to the 3 coloured bars , just press and hold the power button (top) + voicedial button(right top) keep it pressed and hit the soft reset hole (keep the other 2 buttons pressed until the 3 coloured bars come up)''.-
still not work?
i try many times but still not goes in bootmode?
help me please
Are you sure that you are doing it right?
Maybe you are skipping some part like: keep the other 2 buttons pressed until the 3 coloured bars come up
I have tried it to my phone & it is working.
When you try that I have told you what happens to your Wizard?
history of my phone
sir
i try this trick but useless (i press these 2 button upto 5 to 10 min after hitting the soft reset button) but not work!!!
so i tell you my phone history now
the phone was lock to t-mobile than i read one blog in this forum that if u want to unlock phone than u want downgrade the phone to version 1.XX
than unlock it.
so i downgrade the phone to 1.01 my phone is G3.
than after my big mistake is that i write Spl version 3.08 to my phone directly
than than phone is dead not even goes to bootmode.
is there any way to flash my test point ??
thank you
Well...
That's how far I can go .
I can't help you further but I will suggest you to take a look at the thread Dead WIZARD? Never! Let's REVIVE!.
Maybe you will find the solution of your problem there.If not maybe you should make a post there.
Also if you search a bit at xda you will find some more threads about bricked Wizards that will help you.
I hope you will find solution to your problem.-
Same problem .................
Greetings guys, Im having problems with my HTC Diamond the problem is that i think the volume down is stuck even tough the volume down key is not pressed I also checked the button itself and there's no problem on the physical button
what happens is that everytime I do a soft reset the phone goes into bootloader mode I have to press the volume up key while doing a soft reset to make it boot normally after it boots to windows mobile the volume down keeps popping up like someone is pressing the volume down key I have to press the power button and press it again to make it stop but when I press the volume up key the volume goes up and then the volume down is on again I have to hold the volume up key and adjusting the volume from the screen just to make the volume up again, has anyone have any idea whats going on with my diamond I also tried hard reset, change the ROM MTTY and still the same problem I already have tried 3 different ROMS ans still the same problem occurs I also checked the volume keys and seems like no problem it is still making the clicking sensation when i press the button so I know that the volume keys are not stuck
Any Takers???
sorry, read your post and really have no clue.
In your place i would definitely contact HTC for repair (restore stock SPL and ROM), or if outta warranty i would try to figure it out by taking it apart. There are some disassembly guids available here and on the net; but i'm not sure if i would have the courage to do so.
Good luck and sorry can't help you out
Nirak said:
sorry, read your post and really have no clue.
In your place i would definitely contact HTC for repair (restore stock SPL and ROM), or if outta warranty i would try to figure it out by taking it apart. There are some disassembly guids available here and on the net; but i'm not sure if i would have the courage to do so.
Good luck and sorry can't help you out
Click to expand...
Click to collapse
Greetings, Its cool. I understand If not alot of people will reply to my post because I know this is quite a unique issue im having. I did reverse engineering on my Diamond but I don't see any physical sign that the issue is coming from the physical button. I will try to talk to some cellphone technician here, Thank you for your time looking and reading my post.
is out of ideas!
Hey, im new here and very much a noob.
Anyway i just HardSPL and flashed a rom on my new HTC touch pro 2.
Everything went smoothly until it booted up after flashing the ROM.
It comes up with the TouchPro 2 Logo and then goes to a black and white stipped page with a few numbers in the bottom corner and i have no idea if i bricked it or if i've done something wrong!
Can someone please help me!?
remove the backcase and on the side of the device there should be a a reset button that u may have to push with the stylus... u can also try a hard reset hold the send and the end keys along with the power key at the sametime while the phone is off. follow prompts on screen.
fyn3zt said:
remove the backcase and on the side of the device there should be a a reset button that u may have to push with the stylus... u can also try a hard reset hold the send and the end keys along with the power key at the sametime while the phone is off. follow prompts on screen.
Click to expand...
Click to collapse
This is cross posted from PPCGeeks. He flashed CDMA HardSPL on his GSM Pro2 and presumably a CDMA ROM after that too.
mmm interesting