help me
my wiza200 is totaly dead
i downgrade it to 1.01 than i write spl of 3.08 and that is the big mistake i have every done..
so my phone is not power on or not go to bootmode
what to do now
any one have any solution?
please help
or is there any way to start phone is bootmode???
Yes there is a way.
I took the following from the Wizard Wiki
''To go to the 3 coloured bars , just press and hold the power button (top) + voicedial button(right top) keep it pressed and hit the soft reset hole (keep the other 2 buttons pressed until the 3 coloured bars come up)''.-
still not work?
i try many times but still not goes in bootmode?
help me please
Are you sure that you are doing it right?
Maybe you are skipping some part like: keep the other 2 buttons pressed until the 3 coloured bars come up
I have tried it to my phone & it is working.
When you try that I have told you what happens to your Wizard?
history of my phone
sir
i try this trick but useless (i press these 2 button upto 5 to 10 min after hitting the soft reset button) but not work!!!
so i tell you my phone history now
the phone was lock to t-mobile than i read one blog in this forum that if u want to unlock phone than u want downgrade the phone to version 1.XX
than unlock it.
so i downgrade the phone to 1.01 my phone is G3.
than after my big mistake is that i write Spl version 3.08 to my phone directly
than than phone is dead not even goes to bootmode.
is there any way to flash my test point ??
thank you
Well...
That's how far I can go .
I can't help you further but I will suggest you to take a look at the thread Dead WIZARD? Never! Let's REVIVE!.
Maybe you will find the solution of your problem there.If not maybe you should make a post there.
Also if you search a bit at xda you will find some more threads about bricked Wizards that will help you.
I hope you will find solution to your problem.-
Same problem .................
Related
Hi. I tried to flash my kaiser to new Dutty's wm 6.1 rom (had Dutty's v3 before so i had hardSPL) and after the rom update process completed my kaiser died , screen is always black no matter i connect it to charger or push power, is there any possibility to bring my phone back 2 life?
Have you taken the battery out?
Have you tried flashing from SD card?
http://forum.xda-developers.com/showthread.php?t=336158&highlight=flash+from+card
Worked for mine when i bricked it.
i have taken battery out , it wont help. also flashing from sd card works only when u can actually power on the device and i cant do it. name of my rom wasnt RUU_signed.nbh it was : Ruu_Signed_Duttys_WM6.1_5.2.19716_1.64.08.21.nbh maybe thats the reason of error
Well did you try the special key sequence to try to turn it on?
special key sequence? U mean both softkeys and stylus into reset hole?
Can you get it to the HSPL screen?
hold camera button and stylus into reset hole?
If you can to there you can reflash it using the sc card method.
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
Click to expand...
Click to collapse
not the soft keys
thanx but it wont work, if i could enter bootloader i would just reflash the rom, but i cant get my phone on, screen is all the time black. if i plug in a charger there is no charging led too.
Ok, so your saying you tried it and it doesn't work?
im saying this doesnt work because my phone is totally dead. i cant get any response, it just wont turn on.
ok I'm taking it that you didn't try that sequence because you won't say that you tried it.
Hell no he/she ain't tried it. Probably has no idea what you are telling him to do.
Well Belizibub told him, I just started reading between the lines and noticed that he never admitted to trying it.
I love your avatar Tater.
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
how come i try to enter bootloader , the phone is D E A D, it doesnt respond on any key cominations. i cant see even blank screen, nothing, it just wont turn on.
take the battery out and plug it into the charger, if a red light comes on thats a good thing if not then you probably have whats known as a "bricked kaiser" and sent it in for repairs or go buy a new one and save that one for parts.
marcini said:
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
Click to expand...
Click to collapse
LOL, not even worth it.
So let me ask this, Why was this thread started? Was someone seeking help? Has someone provided the possibility of help? Do you think that the devils friend didn't understand that to this requester of help, that his phone appeared to be dead? Or is it possible the Devils right hand man knows something that the requester of help doesn't know and kindly attempted to share it with him, just to have the secret unlock code ignored.
Try up up down down left right left right a b select start.
That will fix your phone.
ps, what I'm getting at is if you haven't tried it then you need to try it. The special key config could possibly turn the phone on for you.
OK, now I see this same conversation going on in 2 different forums by the same person. Here and in Dutty's latest 6.1 release.
I noticed you are an Orange user. I have seen Multiple Orange users trying to flash radios to their phone and locking them up. I suggest looking/searching for one of those threads and see if they have a solution.
Hi, I need some help.
I have a S730 without HardSPL. I understand that I can only flash it with signed original ROM from HTC. Does anyone know if there is anyone to download? I really need to get one on it because I can now get into my phone right now because of keyboard layout problem. Can't even unlock it to get activesync connection.
Stupid me, why didn't I applied the HardSPL completely.
/Chrille
You may use the Hardreset:
Phone off;
Press+hold both Softkeys (the ones on Display-bottom, left and right to the direction pad);
While holding Softkeys->Tap the Powerbutton (Only a short tap,dont hold the Powerbutton!Otherwise the Phone Boots normal...)
->a black Screen with one Question appears;Press 0 if you want to restore FactoryDefaultSettings...
This may help...
arpy said:
You may use the Hardreset:
Phone off;
Press+hold both Softkeys (the ones on Display-bottom, left and right to the direction pad);
While holding Softkeys->Tap the Powerbutton (Only a short tap,dont hold the Powerbutton!Otherwise the Phone Boots normal...)
->a black Screen with one Question appears;Press 0 if you want to restore FactoryDefaultSettings...
This may help...
Click to expand...
Click to collapse
It worked finally. I pushed the power button to long in my desperate attempt to hard reset.
You saved me, thanks a lot
/Chrille
Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please
Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?
No , i didnt do it, i dont kwon how to do it?
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?
hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).
Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears
did u do it?
this is my phone
this is my phone where is it the soft key
Press and hold both soft keys
I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?
The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.
http://www.mediafire.com/?rc3vbcqdtbh
here you go a video
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!
OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.
Today I needed to perform a restore from a backup (using Sprite backup), but when the unit rebooted, it won't progress beyond the "smart mobility" screen.. There are the usual orange numbers in the bottom right of the screen, but it doesnt boot beyond that
I have tried hard resetting it (press both vol up and down, then power on) but I cant get to the screen that says caution you are about to hard reset the device etc etc..
Can someone please help me? This has really got me depressed. I paid a lot of money to get this imported from the UK (I live in Australia), and have found the unit so damn valuable/useful to date..
If anyone has any thoughts / ideas, please help..
wackyD said:
Today I needed to perform a restore from a backup (using Sprite backup), but when the unit rebooted, it won't progress beyond the "smart mobility" screen.. There are the usual orange numbers in the bottom right of the screen, but it doesnt boot beyond that
I have tried hard resetting it (press both vol up and down, then power on) but I cant get to the screen that says caution you are about to hard reset the device etc etc..
Can someone please help me? This has really got me depressed. I paid a lot of money to get this imported from the UK (I live in Australia), and have found the unit so damn valuable/useful to date..
If anyone has any thoughts / ideas, please help..
Click to expand...
Click to collapse
Well, I can't actually see your device, however, relax Bro., the HR procedure on the HD is a bit tricky, took me a couple of trial/errors to perform successfuly, but finally I got it right.
Take deep breath, do it again following the instructions in the Manual (on CD) and it'll be OK.
======
Saar
Ahh man, this well and truely sucks. I have tried HR about 40 times now. Nothing.
Can't even power off the device without pulling out the battery.
First which version of Sprite did you use to backup your phone , and second if you know your rom version enter bootloader and reflash it from there.
Woohoo! I accidentally discovered bootloader and flashed a new rom from there.. pity I didnt know what my original rom was, so now I have to re-install everything as sprite seems to corrupt everything whenever I restore (meaning i have to reflash over again)..
wackyD said:
Woohoo! I accidentally discovered bootloader and flashed a new rom from there.. pity I didnt know what my original rom was, so now I have to re-install everything as sprite seems to corrupt everything whenever I restore (meaning i have to reflash over again)..
Click to expand...
Click to collapse
For my undersanding only, how did you flash a new rom on your HD as I get the strong feeling this can not be done unless you have the original rom version from your operator.
Thus please explain what rom you used, what is your orginal rom as in what carrier did you get your device from.
Maybe I missed something.
Yeah... show off some of your moderator skills and enligjhten us with some nice fact and details about your flash action. From German to WWE or so ?
lucid said:
Yeah... show off some of your moderator skills and enligjhten us with some nice fact and details about your flash action. From German to WWE or so ?
Click to expand...
Click to collapse
I would love to but as you see I can't else I would have a WWE rom on my Swiss device.
So as you see I am in the same boat as you.
I'm pretty sure he just had a matching shipped ROM
wackyD said:
Today I needed to perform a restore from a backup (using Sprite backup), but when the unit rebooted, it won't progress beyond the "smart mobility" screen.. There are the usual orange numbers in the bottom right of the screen, but it doesnt boot beyond that
I have tried hard resetting it (press both vol up and down, then power on) but I cant get to the screen that says caution you are about to hard reset the device etc etc..
Can someone please help me? This has really got me depressed. I paid a lot of money to get this imported from the UK (I live in Australia), and have found the unit so damn valuable/useful to date..
If anyone has any thoughts / ideas, please help..
Click to expand...
Click to collapse
When HR, what does it say when you press both vol up and down, then power on?
did you do HR in power off? or you may try HR after reinstall the battery.
I have not met this, just my suggestion.
the reinstalling battery trick seems to work
I had tried several times to hard reset my stock ROM and finally got it to work by taking out the battery then putting it back in, then first thing hold two volume buttons and press power button on top. Weird how difficult that is!
Yes hard reset is tricky with the buttons... Now I can get it to hard reset quite easily.
1. Press both vol up & down and keep them depressed.
2. Now press the power button briefly while step 1) vol up + down is still depressed. Very important do not press the power button for too long otherwise it won't work. Just press and release...
3. Release the vol up + down keys when you see the red/blue/green stripes on the screen.
4. Follow on screen instructions
is out of ideas!
Hey, im new here and very much a noob.
Anyway i just HardSPL and flashed a rom on my new HTC touch pro 2.
Everything went smoothly until it booted up after flashing the ROM.
It comes up with the TouchPro 2 Logo and then goes to a black and white stipped page with a few numbers in the bottom corner and i have no idea if i bricked it or if i've done something wrong!
Can someone please help me!?
remove the backcase and on the side of the device there should be a a reset button that u may have to push with the stylus... u can also try a hard reset hold the send and the end keys along with the power key at the sametime while the phone is off. follow prompts on screen.
fyn3zt said:
remove the backcase and on the side of the device there should be a a reset button that u may have to push with the stylus... u can also try a hard reset hold the send and the end keys along with the power key at the sametime while the phone is off. follow prompts on screen.
Click to expand...
Click to collapse
This is cross posted from PPCGeeks. He flashed CDMA HardSPL on his GSM Pro2 and presumably a CDMA ROM after that too.
mmm interesting