Database Develop

Anyone get Logmein to work via Kaiser?

I'm getting to the connection page but then it goes back to the sign in.

Working great on my phone.

can you attach the ractrl.cab you used?

Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.

trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib

I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.

Your in luck mate, I found the file. But I cant find away to upload it here.

yeah, connecting to logmein and installing the cab directly from website works great!

Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.

I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.

When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.

avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...

After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...

After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm

On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me

Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG

TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.

If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.

Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.

jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.

Locking data to EDGE or GPRS only. NO 3G

Is it possible to lock out the 3G radio completely on the TILT?
Coming from an Apache on VZW, I was used to being able to change the ModeOfOperation Reg setting and completely locking out the EVDO if I needed to preserve my battery life.
I've tried a number of things on the TILT, but I am not sure which (if any) get me what I want.
I've tried the disableing MEdia Net via KaiserTweak, but when I was in a 3G area it prevented any data connection saying the connection was not allowed (or something similar).
Disabling HSDPA I don't believe is the key either since that is download only.
Again just looking to lock the phone at EDGE/GPRS only. E icon.
**Been Googling
Running the stock ATT ROM, I don't see a BAND page in Settings/Phone/... I've tried exposing it with Schaps Adv. Config Tool, but I still don't see it. I am guessing there is more to exposing this tab than just a reg.
Is BandSwitch the only way?

if u use the 10 button com manager with the 3g switch i would link it but not got time as im at work but search it will be easy to find

Ok I found the 10 button manager on the CABS sticky ...
file name: Kaiser.CommManager.10Button.3GCAB.cab
Are there any known bug/issues with it?
Any TILT issues with it?
I see a few people in an old thread talking about "getting it to work"
I also see Dutty's copy on his FTP site ... "duttythroy 3g comm manager (working).cab"
can anyone comment?

Hi, I use the 10 button com manager on my TyTNII (german stock HTC ROM) and it worked without any issues right after installation.
Greetz,
Hans Olo
EDIT: maybe a soft reset was needed after installation, I can't remember

Ditto - i use it - installed no probs and does what it says on the box so to speak. I have an orange version

try this:
at phone settings /band tab/ change the upper "Auto" to GSM.

pulyka said:
try this:
at phone settings /band tab/ change the upper "Auto" to GSM.
Click to expand...
Click to collapse
thats what the com manager does but on a easy switch baisicly. and no problems on a stock t-mobile uk rom all works fine

pulyka said:
try this:
at phone settings /band tab/ change the upper "Auto" to GSM.
Click to expand...
Click to collapse
This does not show up on my AT&T Stock Rom. Very strange. I do have the 10 button comm manager but it would be nice to do some troubleshooting using the stock WM screens/settings.

Read http://wiki.xda-developers.com/inde...(GPRS & EDGE) modes to optimize battery life!

ckole said:
This does not show up on my AT&T Stock Rom. Very strange. I do have the 10 button comm manager but it would be nice to do some troubleshooting using the stock WM screens/settings.
Click to expand...
Click to collapse
I second that. I do not have this option on my Tilt with the stock rom. Anyone know what's up with that?

Well I used "duttythroy 3g comm manager (working).cab" from the cabs FTP site in the sticky here.
At first it told me the install was not successful because there was an issue with "system permissions". Thinking it was the the CAB itself I tried the other 10 button I found "Kaiser.CommManager.10Button.3GCAB.cab, but got the same.
I did a soft reset, then tried Dutty's again and it worked fine. It required another soft reset after install.
It replaces the stock comm manager with one that looks like it could be from a Touch (from the icons). Works fine and includes a 3G button that was lit. When I tapped the button the icon went dark, the radio looked like it did a little reset (since it went to no signal ... like flight mode) and 10-15 seconds later it came back up locked at EDGE.
Perfect! Thanks for the guidance getting there.
As for those of you with AT&T stock ROMS, AT&T probably had the BAND page removed/hidden in their version. Why? Who knows.

Double post

Internet while connected to Activesync..

Hi all,
I am on Dutty's apr-29 rom and here is my issue..
My kaiser is connected to my work pc with activesync installed and i am unable to use internet on my device... I can update htc weather with no worries but the pie and skyfire doesn't work... the strange thing is that netfront browser works just fine so iam not sure if its a proxy issue or not???
I would like to use skyfire if possible so pls let me know what can i do to make it work.
Thanks alot

First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)

hi, i have the same problem...but I still using the standard ATT rom...

ajmoncrief said:
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
Click to expand...
Click to collapse
Hi,
Thanks for the quick reply, I tried what you suggested but still no luck..

I honestly don't know...the fact that you are able to update the weather but not others has me stumped. Has it always behaved this way? Can you do a complete system backup using sprite and hard resest, before you restore, connect it to activesync (you do not need to configure it to sync with your device, iow just cancel the first screen) and see if you can use pie or check your email. If you can then there must be a problem with your settings somewhere, but if you cant then just use sprite for a full system restore and you should be back to where you were and maybe someone else can help.
For what its worth when I first got my tilt it would not use the internet no matter which way I tried (ota or activesync). Then it magically just started working.

hello once again,
Ok so here is the thing... i played around with it a bit more and was able to get pie to work.. but everything else still doesn't work (windows live, skyfire, etc..)
I went to connections>>advanced>>select network>> on this screen i selected "My ISP" for the top menu and "My Work Network" for the bottom menu... By making this change pie is now working but still no luck with skyfire..
Note: i do not have a data plan so MY ISP menu is empty, i usually use skyfire with wifi or when connected to my laptop at home
PS: I didn't do a hard reset because i dont think it has anything to do with rom upgrade...i have flashed my device like 47 times in last 2 months and have had the same issue with every rom i've tried including the original htc rom. Everything works jsut fine when when my device is connected to my laptop at home using activesync.

I think you would still have the problem after a hard reset. Mine has the problem now on the standard Tilt ROM. The wierd part is it didnt when I first set it up and was running the internet through cerdisp. I guess I need to look into it too, but I havent been going crazy trying to find it.
What version of activesync are you using?

Iam using Activesync 4.5..

Have you tried disabling your windows firewall?

Dumb Question
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.

If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.

larcen007 said:
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
Click to expand...
Click to collapse
Well the only reason i wanna use my device and not the work pc is beacuse all the major sites like hotmail, youtube, facebook are blocked but they all work on my device using "only" netfront browser..
Cheers

Xyberz said:
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
Click to expand...
Click to collapse
Thanks Bud,
will give it a go and report back...
PS: i just noticed that windows firewall is enabled and i dont have access to disable it :-(

you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000

ld-runner said:
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers

farhanali_ said:
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
Click to expand...
Click to collapse
yes, or you could just copy and paste my post into a file with and extension called .reg , save it and double click on it.

Pocket IE 403

Hello all,
I just upgraded to Windows Mobile 6.1 on my ATT tilt. I ran Kaiser Tweak to enable the HSDPA, which is working great. I won't be charged by ATT for enabling HSDPA will I?
Anyways, my problem is that when I try to open Pocket IE and browse to a website I walways get a 403 error. I have tried running Disable Proxy.cab and Enable Proxy.cab but it is not working.
Any help is appreciated. Much thanks.

I can't answer your question sorry, but let me point you towards Opera 9.5 browser - much better than pocket IE, imho.

How are you "Connection Settings" set?
Use the HTC Auto Config CAB (install and soft reset)
After it ran go the the MediaNet connection and select:
- User server assigned IP address (under TCPIP and Servers)
- Proxy Settings check "The network connects to the internet" (first box) all others off.
You SHOULD get at least an Edge connection. I don't know how BUT without a SIM card with the "3G" logo I was never able to get a 3G connection but that's a different story.
Edit: Attached the HTC Connection Setup Auto CAB

I tried your method but I still haven't had luck.
I believe it is because I have an iPhone 3G data plan which doesn't have MEdia NET. Is there a work around for this? I only want Pocket IE because Opera Mini cannot download files.

dylanc430 said:
because Opera Mini cannot download files.
Click to expand...
Click to collapse
but the guy was suggesting you to get Opera 9.5, not Opera Mini.
Once you start using Opera, you'll forget PIE soon

dylanc430 said:
Hello all,
I just upgraded to Windows Mobile 6.1 on my ATT tilt. I ran Kaiser Tweak to enable the HSDPA, which is working great. I won't be charged by ATT for enabling HSDPA will I?
Anyways, my problem is that when I try to open Pocket IE and browse to a website I walways get a 403 error. I have tried running Disable Proxy.cab and Enable Proxy.cab but it is not working.
Any help is appreciated. Much thanks.
Click to expand...
Click to collapse
If you have not figured out the answer to this let me share my experience with this issue.
This is an annoying AT&T issue with your data. In 6.0 IE used to just show a blank screen when it happened, 6.1 now shows the 403 error. This happens for no known reason when the data decides to just crap out. It's very frustrating and happens a few times a week it seems.
If you have soft-reset your phone recently (turned all the way off) you've probably noticed that it's working again. Soft-resets fix this issue, but can be a hassle if you're in the middle of something. Fortunately there is a quicker way that was posted on a similar thread about the same issue.
When you get the 403 error, go into your Com Manager (where you can turn off wifi/data/phone etc...) Turn on Airplane mode, when completed, turn off Airplane mode. This will reset your data enough to fix the 403 error without soft-resetting.
Give this a try next time and see solves the problem.
Edit: Just noticed your post about having the iPhone data. Not sure if this is the issue or not, but if so my solution may not do anything for you.

myth.71 said:
but the guy was suggesting you to get Opera 9.5, not Opera Mini.
Once you start using Opera, you'll forget PIE soon
Click to expand...
Click to collapse
But for some reason, Opera is too cumbersome when trying to view information. You have to continue to ZOOM it so you can see. Then, also, it will not allow you to view certain data on web pages. I use Skyfire to view websites. I HATE the zooming feature on it as sell, but at least I know it'll pull up all information. Maybe it's Active X or something.

HTC PURE AT&T - internet sharing help

hello guys
I need to be able to use the internet sharing w/out signing up with AT&T , my phone is lock, can someone help me and let me know what can I do to activate the Internet sharing?
do I need to unlock the phone ?
do I need to unlock the sim card?
whats the eases way to unlock my At&t HTC Pure ?
I work outdoor in sales and I need to use my laptop all the time ..
please help....

julien01 said:
hello guys
I need to be able to use the internet sharing w/out signing up with AT&T , my phone is lock, can someone help me and let me know what can I do to activate the Internet sharing?
do I need to unlock the phone ?
do I need to unlock the sim card?
whats the eases way to unlock my At&t HTC Pure ?
I work outdoor in sales and I need to use my laptop all the time ..
please help....
Click to expand...
Click to collapse
are you trying to use internet sharing with no data plan? if so, that wont work

Like "leemoss84" commented, you can't use internet sharing if you don't have data plan, as internet sharing is using the data plan of your phone for browsing internet on computers.
But if you want to use the wireless (Wi-Fi) feature of the phone without using the data plan, disable the 'Proxy'
Start > Tools > Proxy Manager > Disable Proxy
also in the Settings > Connections > Select Network
select "My ISP" instead of MEdia Net
once you've done this, you can access wireless network without being charged by AT&T.

I do have Data plan
I do have a Data Plan with AT&T with unlimited internet, but At&t wants me to charge me an extra $60 a month! just for tethering with my laptop
or to use the phone as a modem.
I want to know if there is a way to jump the $60.00 a month they want to charge on top of the unlimited internet and voice plan Im paying now.
Thanks in advance.

julien01 said:
I do have a Data Plan with AT&T with unlimited internet, but At&t wants me to charge me an extra $60 a month! just for tethering with my laptop
or to use the phone as a modem.
I want to know if there is a way to jump the $60.00 a month they want to charge on top of the unlimited internet and voice plan Im paying now.
Thanks in advance.
Click to expand...
Click to collapse
To tether undetected, just make sure both your internet connections in "Settings\Connections\Connections\Advanced Select Networks" are set to MediaNet and take out any proxy server in "Settings\Connections\Connections\Tasks\Manage Existing Connections"
I do it all the time.

Bruce thanks, so I went to take out the proxy server in "Settings\Connections\Connections\Tasks\Manage Existing Connections"
I i see a message on the TASK tab " The Connection is pre-configured it cannot be modified

I didn't know that would work unless you use a custom rom. I wasn't able to tether untill I flashed with dutty's. after that.. a few changes (media net, etc. mentioned above.) and I was off and running..

can you please recommend how can I flash my phone?
at this moment I'm lock with At&t
what will be the best option to flash my phone?

step one assume you have topaz (htc pure) in my case
go here to this link http://forum.xda-developers.com/showthread.php?t=520312
then once thats done go here and choose your rom that you want to flash
http://forum.xda-developers.com/forumdisplay.php?f=486
I recomend NRGZ28 Max manila http://forum.xda-developers.com/showthread.php?t=562942
basicly when you download the rom if everything went well with step one just open the RUU file (looks like a topaz phone icon) and follow instructions. Make sure your phone is connected via sync
again this is a fast tutorial theres more detail ones around here in these forums

I had the same trouble when I first got the pure. There is a way to use ICS on the original rom. You have to change some registry values. I searched the internet and found the instuctions and it worked. But since then I have used many different roms that are better than the original and don't have that problem. I would recommend the energy rom. Remember to install hard spl first.

julien01 said:
Bruce thanks, so I went to take out the proxy server in "Settings\Connections\Connections\Tasks\Manage Existing Connections"
I i see a message on the TASK tab " The Connection is pre-configured it cannot be modified
Click to expand...
Click to collapse
Don't you have a app "Remove Proxy server"?

all of this is comepletly not needed . there is a reg edit that will handle this easily over on the att forum . ;-) just do some digging like i did no flashing or other programs needed .

xhozt said:
all of this is comepletly not needed . there is a reg edit that will handle this easily over on the att forum . ;-) just do some digging like i did no flashing or other programs needed .
Click to expand...
Click to collapse
might as well just install a simple app that is 2kb. it will save time considering you didnt post the edit and when you hard reset you dont have to go looking for it again, all you gotta do is install the app.

I will do some more research
then I need a app to manipulate the Registry on my HTC PURE with AT&T.
thanks guys

julien01 said:
then I need a app to manipulate the Registry on my HTC PURE with AT&T.
thanks guys
Click to expand...
Click to collapse
see 2 posts above. I posted the app here
http://forum.xda-developers.com/showpost.php?p=5802221&postcount=11

WOW ! I got it the HTC PURE AT&T Solution to install the latest "Hard SPL"
Wow!
First thank you for all your contributions and inputs trying to help me with my problem Flashing the HTC PURE AT&T
Here is what I did:...
I was having a lot of problems trying to install the latest "Hard SPL", specially with USB communication and even when my phone was connected via ActiveSync.
I tried the automatic Flash and the manual with no results........ I was about to give up!
Also I download the "enablerapinew.cab" and installed on my phone main memory and ran the .cab and I got the message "installation of enablerapinew.cab was unsuccessful"- so i was going NUTS ! and I tried another .cab files to see if I was getting the same error and .... same thing I tried different .cab files like TOMTOM , google maps and a Games and all of them gave me the same message !"installation of enablerapinew.cabwas unsuccessful"
mmm........
So what I did was I reset the phone to the Manufacturers setup ( you know entering the password) 1234 and the phone will be like the first time you turned on.
so after that I install the enablerapinew.cabb and the installation was successful ! and everything else work !
now I have the ROM i wanted ! and .....
KISS GOODBYE AT&T !!!

julien01 said:
Wow!
First thank you for all your contributions and inputs trying to help me with my problem Flashing the HTC PURE AT&T
Here is what I did:...
I was having a lot of problems trying to install the latest "Hard SPL", specially with USB communication and even when my phone was connected via ActiveSync.
I tried the automatic Flash and the manual with no results........ I was about to give up!
Also I download the "enablerapinew.cab" and installed on my phone main memory and ran the .cab and I got the message "installation of enablerapinew.cab was unsuccessful"- so i was going NUTS ! and I tried another .cab files to see if I was getting the same error and .... same thing I tried different .cab files like TOMTOM , google maps and a Games and all of them gave me the same message !"installation of enablerapinew.cabwas unsuccessful"
mmm........
So what I did was I reset the phone to the Manufacturers setup ( you know entering the password) 1234 and the phone will be like the first time you turned on.
so after that I install the enablerapinew.cabb and the installation was successful ! and everything else work !
now I have the ROM i wanted ! and .....
KISS GOODBYE AT&T !!!
Click to expand...
Click to collapse
yeah, a good hard reset will work wonders sometimes when you got a problem that cant be fixed. congrats.

so i have a question... i am running a custom rom on my phone, but my dad wants to basically do what the OP wanted, internet tethering without paying for the extra tethering plan. i cannot convince him to let me flash a new rom, likes the phone as is, just wants internet sharing. if i run that .cab on his phone, do i have to then make registry changes, or will the cab do all the work? what else would i need to do to give him his internet sharing?

2002wrex said:
so i have a question... i am running a custom rom on my phone, but my dad wants to basically do what the OP wanted, internet tethering without paying for the extra tethering plan. i cannot convince him to let me flash a new rom, likes the phone as is, just wants internet sharing. if i run that .cab on his phone, do i have to then make registry changes, or will the cab do all the work? what else would i need to do to give him his internet sharing?
Click to expand...
Click to collapse
Just install the cab.
AT&T tracks tethering through their proxy server, the reg edit just takes out the proxy settings as does the cab.
Its the same tweak, just different ways to get there.
To verify it worked go to Settings\Connections\Connections\Manage Existing Connections\Proxy Settings and confirm it is blank.

the "enablerapinew.cab" this CAB is for phones with problem installing the Hard SPL, the "enablerapinew.cab" will enable the phone to install the "Hard SPL" and them you need to flash the ROM , on my case I did a hard reset and them install the "enablerapinew.cab" them run the cab , and them flash the Rom, and after that I was able to share internet w/out problems