Cellular (GPRS)
-Access Point Name: wap.voicestream.com
-Proxy server: 216.155.165.50
-HTTP should be 216.155.165.50 port 8080
-WAP should be 216.155.165.50 port 9201
-Secure WAP should be 216.155.165.50 port 9203
Those are the connection I'm using right now. It use to work, all of a sudden, when I connect to internet explorer, this pops up
HTTP ERROR: $CODE$
$MESSAGE$
REQUEST URI=/M
still working for me. reset and all that jazz
chucknasty626 said:
Cellular (GPRS)
-Access Point Name: wap.voicestream.com
-Proxy server: 216.155.165.50
-HTTP should be 216.155.165.50 port 8080
-WAP should be 216.155.165.50 port 9201
-Secure WAP should be 216.155.165.50 port 9203
Those are the connection I'm using right now. It use to work, all of a sudden, when I connect to internet explorer, this pops up
HTTP ERROR: $CODE$
$MESSAGE$
REQUEST URI=/M
Click to expand...
Click to collapse
try port number 8080 for wap and secure and socks ip is the same but port 1080 and mine never fails.
still doesn't work
Similar issue
I am having a similar issue with my Dash. I am using the tmobile proxy and I get the HTTP ERROR: $CODE$ $MESSAGE$ REQUEST URI=/ error when I installed Palringo. Once I installed Palringo I started getting the error in PIE, but Palringo worked fine. I uninstalled Palringo and I PIE works again.
Also, I get this error when I attempt to share the tmobile proxy with my pc. They connect and show everything working, but when I attempt to go to anything in a browser on my pc I get the HTTP ERROR: $CODE$ $MESSAGE$ REQUEST URI=/ error in the browser on my pc. I can still browse on my Dash, but it will not share this connection with my pc.
I can ping domains from my pc and it resolves the domain but will not get any response from the pings.
It seems to me like tmobile has some sort of restriction on their proxy that is causing this. Any ideas?
I've been having the same problem. I've drove to another location to rule out tower, tried other tmobile branded phones, noted other co-workers having the same problem, which ruled out sim card, hard reset my phone, and flashed back to factory rom. The only think I've noticed is if I flash to factory rom or do a hard reset and keep the cooked rom, I do NOT get the error until I install any program... doesn't matter what the program is... but after installing it the first time the error starts again.
It doesn't happen ALL the time, but will happen at least once on every connection.
I'm actually on the phone with Level 3 support at T-Mobile now to see if they can solve the problem. I'll let you guys know what I find.
Related
Merry Christmas everyone
I have just recieved an HTC MTeoR for xmas. I am on Orange in the UK (Contract). I quite like the phone so far but there seem to be no Orange settings for GPRS, internet wap etc on it (which is to be expected) so I can't access the internet or anything.
I was wondering if some kind soul could give me a bit of a dummies guide to which settings I need to put in and where to enable this.
Sorry for the newbie question but everyone has to start somewhere.
Thanks in advance. All the best,
Rich
Orange UK settings
Here you go! This is supposed to work on an i-Mate SP JAS, so it should work on the HTC MTeoR as well.
That is fantastic. It works (after a little playing around with the security to let me run the file)
Thank you so much
Rich
What do you do with the file once it is downloaded, I put it on my phone and got gprs working for a bit and now it has stopped working again?
I just found that it only work when connected by USB into the computer? Also I think I made a bit of a mistake, I unzipped the file before trasferring it onto the phone, when I tried moving the whole file onto the phone it says that the program does not have sufficient permission. Could anyone help me out?
Does anyone know?
???
Hi, when you have pluged in the usb and cradeld with pc than its no problem... because the traffic goes trough the usb, active sync and the internet connecton of your pc ....
check the connection settings under start -> settings -> gprs ....
call your provider and ask for the gprs settings...
you should become settings like this:
apn: blabla.com
user: [email protected]
pass: blabla
for my side this is all and it works...
to configure mms you must go to messaging options and mss options... then you have to click on right softkey mmsc settings and made an new entry ...
that looks a quite different ...
gateway: ipadresse (x.x.x.x)
server: mmsc.blabla.com
ps. google says -> Orange UK GPRS Settings:
Orange GPRS settings (WAP):
Homepage: http://orange.multimedia/
APN add. (Contract): orangewap
APN add. (PAYG): paygwap
Gateway (IP) address : 192.168.71.035
Username: Orange
Password: Multimedia
Session type: Continuous / permanent
Authentication: Normal
Port number: 9201
Does this mean that I don't need to use that file anyway. I tried to enter the data and now it is saying there is no network coverage so do you think it is working but there maybe is just no network coverage in my area.
I am having a problem reading my POP3 email.
The Kaiser configured itself to ATT (with the iPhone SIM) and the connection appears as MEdia Net
Connection to the Internet (Explorer) Works OK and I get the H connection. I am in Los Angeles.
However when attempting to read my email (Shows 3G) I get a "cannot connect with current connection setting" and gives me the option of going to Connections settings Where I get MediaNet or My Work Network. (It is set to go to MediaNet I believe)
I know the POP3 settings are correct as they work great via WiFi.
Any suggestions?
Thanks
yes change medianet to My Isp wap.cingular settings and everything will be fine.
the settings are:
wap.cingular
username: WAP.CINGULARGPRS.COM
password: cingular1
THANK YOU.
My ISP connection was auto set by the Kaiser to
isp.cingular
username: ISP.CINGULARGPRS.COM
Per your suggestion I changed ISP to WAP and all seems well
Thanks again
I'm connected to Orange Israel cellular network. Orange got 2 APN for 3G connection. The first "uinternet" in open internet connection and the second "uwap.orange.co.il" is connection to Orange WAP network and to the internet through a proxy (port 80 only).
I got both APN defined the internet in the MY ISP connections and the wap in the My Work Network with the proxy setup.
On my previous device (HTC TyTN) with the official HTC ROM i was able to connect to both APN on the same time, having wap connection for the Exchange push mail and MMS while the internet connection used for a POP3 and iMap4 accounts.
Since switching to the Kaiser I can't connect to both on the same time, and if I send a MMS the device tries to switch to the wap connection and keep disconnecting due to the Exchange and Live push email keep reconnecting the internet connection.
Due anyone know how can I connect to both APNs and if not what is require to do (beside disabling the push email) to enable the APN switching ?
I have: Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
I click on video sites and go to youtube full
I'm connected to "MEdia Net (EDGE)"
I select any video to play
The icon starts spinning
And usually it gives me a "Server Timed out: 74.125.15.31" or a "cache.youtube.com" error
I've gotten it to work before when it was connected to my computer which is connected to the internet, but after that my phone would connect to the internet but it would never load any pages, I couldn't revert it back to it's previous state so I re-installed Duttys ROM and started fresh again
EDIT: It appears like I can actually get sound and video through google video but when I try youtube TC loads up but says it couldn't find video
then after that I tried a different video and got "Server Timed out: 74.125.15.20"
Is something wrong with my settings?
My Connection settings are:
My ISP
My ISP GPRS "Cellular Line (GPRS , 3G)"
isp.cingular
Username: [email protected]
Password: **************
Domain: <Blank>
Use Server-assigned IP Address
User Server-assigned Addresses
MEdia Net
MEdia Net "Cellular Line (GPRS , 3G)"
wap.cingular
Username: [email protected]
Password: **************
Domain: <Blank>
Use Server-assigned IP Address
User Server-assigned Addresses
VPN <Blank>
Proxy This network connects to the Internet
This network uses a proxy server to connect to the internet
Wireless.cingular.com
HTTP wireless.cingular.com:80
WAP
Secure WAP
Socks localhost:1080
---
Can anyone walk me thru what I'm supposed to do with this?
Any help is appreciated, thanks.
Can anyone help me?
Are you trying to watch something that might require you to be logged into youtube? Also try going to the linked page.
Try installing this Cab and See what happens.
http://www.4shared.com/file/45995493/d58b228c/TCPMP-072RC1-ARM-PPC-recomp-01.html
I can't get mine to connect with the AT&T proxy enabled either. I get the same result. If you uncheck the box saying this "this network uses a proxy server to connect to the internet" under Proxy Settings in connections, mine works....
Also I get an error if I try to connect when Blackberry Connect is running. In case you run that. I have to manually suspend it even though I am using a cooked rom that allows multiple connections...
Yeah for some reason TCPMP doesn't hold open the connection either. I think It uses the Data Connection Differently.
Could it be possible AT&T blocked traffic from youtube? I use to view youtube video flawless while on 3g. But right now i can't even watch a full length of the video on 3g network , but on wifi i can watch full length of the video with no problem.
I don't know that anyone would know the answer to this but I thought I would try anyway.
I have a tilt but I also have an iphone. I have pretty much fallen in love with my tilt all over again and would like to know if anyone knows of a way to surf the web on my tilt using my iphone data plan. All answers point to no when I took a look at ATT's website but I thought maybe one of you guys knew of a work around.
Cant you connect up using bluetooth and surf the web that way? Seems pointless when you can just browse the web on the iphone though.
Edit: nvm I just realised what you were saying. Just shove your sim in the tilt and use same settings as on your iphone. Can't see why that wouldnt work unless it sends a signal to your carrier saying what model phone you are using.
I could but I was thinking more for when I am on the move and don't have a bluetooth or wifi connection to connect to.
This would be for when i am at random places where I just don't have an alternative way of connecting.
Could this work? Pinched it from a blackberry site though. Can't test, since i'm not in the US.
Code:
Name: MEdia Net
Homepage: http://device.home
Service Type 1: WAP
Gateway IP: 66.209.11.61
Port 1: 9201
Domain 1: Blank
Service Type 2: WAP
Gateway IP 2: 000.000.000.000
Port 2: 9201
Domain 2: blank
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 15 minutes.
CSD No 1: 14152441012 or 18472549271
Username: [email protected] (required for CSD use only)
Password CINGULAR1 (required for CSD use only)
Speed (Bps) 1: 9600
Linetype 1: ISDN
CSD 2: Blank
Username 2: Blank
Password 2: Blank
Speed (Bps): 9600
Line Type 2: ISDN
GPRS APN: wap.cingular
Username: <leave blank>
Password: <leave blank>