Interesting Question - Tilt, TyTN II, MDA Vario III General

I don't know that anyone would know the answer to this but I thought I would try anyway.
I have a tilt but I also have an iphone. I have pretty much fallen in love with my tilt all over again and would like to know if anyone knows of a way to surf the web on my tilt using my iphone data plan. All answers point to no when I took a look at ATT's website but I thought maybe one of you guys knew of a work around.

Cant you connect up using bluetooth and surf the web that way? Seems pointless when you can just browse the web on the iphone though.
Edit: nvm I just realised what you were saying. Just shove your sim in the tilt and use same settings as on your iphone. Can't see why that wouldnt work unless it sends a signal to your carrier saying what model phone you are using.

I could but I was thinking more for when I am on the move and don't have a bluetooth or wifi connection to connect to.
This would be for when i am at random places where I just don't have an alternative way of connecting.

Could this work? Pinched it from a blackberry site though. Can't test, since i'm not in the US.
Code:
Name: MEdia Net
Homepage: http://device.home
Service Type 1: WAP
Gateway IP: 66.209.11.61
Port 1: 9201
Domain 1: Blank
Service Type 2: WAP
Gateway IP 2: 000.000.000.000
Port 2: 9201
Domain 2: blank
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 15 minutes.
CSD No 1: 14152441012 or 18472549271
Username: [email protected] (required for CSD use only)
Password CINGULAR1 (required for CSD use only)
Speed (Bps) 1: 9600
Linetype 1: ISDN
CSD 2: Blank
Username 2: Blank
Password 2: Blank
Speed (Bps): 9600
Line Type 2: ISDN
GPRS APN: wap.cingular
Username: <leave blank>
Password: <leave blank>

Related

Using ATT iPhone SIM on Kaiser email problem

I am having a problem reading my POP3 email.
The Kaiser configured itself to ATT (with the iPhone SIM) and the connection appears as MEdia Net
Connection to the Internet (Explorer) Works OK and I get the H connection. I am in Los Angeles.
However when attempting to read my email (Shows 3G) I get a "cannot connect with current connection setting" and gives me the option of going to Connections settings Where I get MediaNet or My Work Network. (It is set to go to MediaNet I believe)
I know the POP3 settings are correct as they work great via WiFi.
Any suggestions?
Thanks
yes change medianet to My Isp wap.cingular settings and everything will be fine.
the settings are:
wap.cingular
username: WAP.CINGULARGPRS.COM
password: cingular1
THANK YOU.
My ISP connection was auto set by the Kaiser to
isp.cingular
username: ISP.CINGULARGPRS.COM
Per your suggestion I changed ISP to WAP and all seems well
Thanks again

T-Mobile Tzones Connection DEAD!

Cellular (GPRS)
-Access Point Name: wap.voicestream.com
-Proxy server: 216.155.165.50
-HTTP should be 216.155.165.50 port 8080
-WAP should be 216.155.165.50 port 9201
-Secure WAP should be 216.155.165.50 port 9203
Those are the connection I'm using right now. It use to work, all of a sudden, when I connect to internet explorer, this pops up
HTTP ERROR: $CODE$
$MESSAGE$
REQUEST URI=/M
still working for me. reset and all that jazz
chucknasty626 said:
Cellular (GPRS)
-Access Point Name: wap.voicestream.com
-Proxy server: 216.155.165.50
-HTTP should be 216.155.165.50 port 8080
-WAP should be 216.155.165.50 port 9201
-Secure WAP should be 216.155.165.50 port 9203
Those are the connection I'm using right now. It use to work, all of a sudden, when I connect to internet explorer, this pops up
HTTP ERROR: $CODE$
$MESSAGE$
REQUEST URI=/M
Click to expand...
Click to collapse
try port number 8080 for wap and secure and socks ip is the same but port 1080 and mine never fails.
still doesn't work
Similar issue
I am having a similar issue with my Dash. I am using the tmobile proxy and I get the HTTP ERROR: $CODE$ $MESSAGE$ REQUEST URI=/ error when I installed Palringo. Once I installed Palringo I started getting the error in PIE, but Palringo worked fine. I uninstalled Palringo and I PIE works again.
Also, I get this error when I attempt to share the tmobile proxy with my pc. They connect and show everything working, but when I attempt to go to anything in a browser on my pc I get the HTTP ERROR: $CODE$ $MESSAGE$ REQUEST URI=/ error in the browser on my pc. I can still browse on my Dash, but it will not share this connection with my pc.
I can ping domains from my pc and it resolves the domain but will not get any response from the pings.
It seems to me like tmobile has some sort of restriction on their proxy that is causing this. Any ideas?
I've been having the same problem. I've drove to another location to rule out tower, tried other tmobile branded phones, noted other co-workers having the same problem, which ruled out sim card, hard reset my phone, and flashed back to factory rom. The only think I've noticed is if I flash to factory rom or do a hard reset and keep the cooked rom, I do NOT get the error until I install any program... doesn't matter what the program is... but after installing it the first time the error starts again.
It doesn't happen ALL the time, but will happen at least once on every connection.
I'm actually on the phone with Level 3 support at T-Mobile now to see if they can solve the problem. I'll let you guys know what I find.

Youtube VideoBundle/Video Loader Can't play

I have: Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
I click on video sites and go to youtube full
I'm connected to "MEdia Net (EDGE)"
I select any video to play
The icon starts spinning
And usually it gives me a "Server Timed out: 74.125.15.31" or a "cache.youtube.com" error
I've gotten it to work before when it was connected to my computer which is connected to the internet, but after that my phone would connect to the internet but it would never load any pages, I couldn't revert it back to it's previous state so I re-installed Duttys ROM and started fresh again
EDIT: It appears like I can actually get sound and video through google video but when I try youtube TC loads up but says it couldn't find video
then after that I tried a different video and got "Server Timed out: 74.125.15.20"
Is something wrong with my settings?
My Connection settings are:
My ISP
My ISP GPRS "Cellular Line (GPRS , 3G)"
isp.cingular
Username: [email protected]
Password: **************
Domain: <Blank>
Use Server-assigned IP Address
User Server-assigned Addresses
MEdia Net
MEdia Net "Cellular Line (GPRS , 3G)"
wap.cingular
Username: [email protected]
Password: **************
Domain: <Blank>
Use Server-assigned IP Address
User Server-assigned Addresses
VPN <Blank>
Proxy This network connects to the Internet
This network uses a proxy server to connect to the internet
Wireless.cingular.com
HTTP wireless.cingular.com:80
WAP
Secure WAP
Socks localhost:1080
---
Can anyone walk me thru what I'm supposed to do with this?
Any help is appreciated, thanks.
Can anyone help me?
Are you trying to watch something that might require you to be logged into youtube? Also try going to the linked page.
Try installing this Cab and See what happens.
http://www.4shared.com/file/45995493/d58b228c/TCPMP-072RC1-ARM-PPC-recomp-01.html
I can't get mine to connect with the AT&T proxy enabled either. I get the same result. If you uncheck the box saying this "this network uses a proxy server to connect to the internet" under Proxy Settings in connections, mine works....
Also I get an error if I try to connect when Blackberry Connect is running. In case you run that. I have to manually suspend it even though I am using a cooked rom that allows multiple connections...
Yeah for some reason TCPMP doesn't hold open the connection either. I think It uses the Data Connection Differently.
Could it be possible AT&T blocked traffic from youtube? I use to view youtube video flawless while on 3g. But right now i can't even watch a full length of the video on 3g network , but on wifi i can watch full length of the video with no problem.

Setting GPRS, no connection

Hello, ive been trying to set the GPRS setting for my kaiser but had no luck , it always shows that it doesnt get any connection. Could someone tell me were to write for everything to work? Here are my operators settings:
profile name: TELE2 GPRS
start page: http://wap.tele2.lt
IP adress (WAP GW IP): 130.244.196.090
authentification: normal
connection type: permanent
data bearer: GPRS
APN: wap.tele2.lt
port: 9201 or 8080*
ID: -
Password: -
So could someone help me?

Einstein Wireless Internet/MMS settings

Hi Everyone...
I have posted a few times that I use my tilt with Einstein Wireless... They are a smaller GSM provider that had outstanding rates, but a limited area you can live to use their services... I have received private messages from a few mmbers who also use Einstein and can never get extra features besides basic phonecalls working on their network,,, Here are some settings to set up so you can use Picture & video messages in addition to TXT messages... and internet in general...
Internet:
Under settings, coto Connections...
Name for connection : EinsteinPCS Internet
access poin name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
User Servier assigned IP address
click ok..
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
I have also found that it works better if you delete the AT&T or other settings so it doesn;t default back to them on a soft reset.... Feel free to MSG me if you have any questions and I will do my best to answer them, but keep in mind I dont; work there and onyl got these from playign around and seeign settigns on some of their other phones I had... They don't have any smartphones for sale...
Other information may be found at :
http://www.einsteinpcs.com
Just found out about Einstein Wireless
And have an unlocked blackberry that doesnt want to get signal with Einstein Wireless wondered if this might be an issue with the Blackberry or if Einstein Wireless runs off a slightly different signal versus my standard and if I might need to change some setting in the phone itself. Just a note this unit works with a T-mobile chip fine. So any suggestions?
Is your Blackberry a tri/quad-band phone? You need atleast a triband as Einstein uses either 850 or 1900 in most of their areas... if your phone doesn;t use both of these then you wil lreceive areas where you get no service
Is your Blackberry a tri/quad-band phone? You need atleast a triband as Einstein uses either 850 or 1900 in most of their areas... if your phone doesn;t use both of these then you wil lreceive areas where you get no service.

Categories

Resources