Database Develop

New SX66 firmware on Siemens website

Found this out on howardforums.com
http://www.howardforums.com/showthread.php?s=&threadid=568666
http://communications.siemens.com/c...1774_rArNrNrNrN_prodId:76051,00.html#Firmware
Firmware is v1.33.110
Anyone know what the deal is, fixes etc.?
Also, will installing this wipe everything?

Further info
http://forum.xda-developers.com/viewtopic.php?p=91334#91334
Rom has password issue

MDAIIIUser said:
Further info
http://forum.xda-developers.com/viewtopic.php?p=91334#91334
Rom has password issue
Click to expand...
Click to collapse
Ok, I read that thread and didn't find any useful information. The conclusions it leads to are
-no one has successfully installed this rom
-the new rom does things which we don't know about
What do you mean when you say that "the Rom has [a] password issue"?

I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?

AdmiralAK said:
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
Click to expand...
Click to collapse
I hope you didn't hear that on the HOFO thread, because that was me speculating, and I have no evidence for it - just a hunch.
However, I would also like someone to verify. :wink:

Dster
If you own a sx66 then this upgrade is for you and should be a better one than your last.
Others out here see the 1.35, get excited and hope to install this upgrade on a non siemnes devices. When they try this they come upon the "Password issue" which in short says that you cant use that upgrade with the tools that are found on this site.
Check wiki for a better understanding.

No Simlock
AdmiralAK said:
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
Click to expand...
Click to collapse
Installed the new rom. I can verify there is no sim lock on it.

does anyone know how i could perform this upgrade while using the highest avalible radio version? 1.06.02

[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started

MDAIIIUser said:
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
Click to expand...
Click to collapse
I cant wait

New to this
MDAIIIUser said:
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
Click to expand...
Click to collapse
Sorry I am new to this.... how would I upload just the extended rom?

You'll first need to unlock your Extended ROM.
Download this file and run it on your SX66:
http://www.beyondthetech.com/downloads/phone/modding/BA_ExtROMTools.cab
Then go Start > Programs > ExtROM Tools > Unhide.
Reboot your SX66, then you'll see a folder called Extended_ROM. Copy that out to your desktop, then up to the FTP site at
ftp://xda:[email protected]
Just in case you didn't know, this folder contains the first programs and settings that it runs upon a hard reset.
Please let me know when you're able to do this. Perhaps somewhere in there is the key to resolve my annoying "05"-text-message-for-voicemail notifications issue.
Thanks!

Updating one of our SX66's as I type this.
We'll soon see what happens...
I did notice that the radio stack isn't as updated as some of the other stacks out there. I'll test it for a while, and if necessary, 'upgrade' back to the higher version.

uploaded.

Just updated the ROM and the RadioROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How are DUN and SIM lock?
Any noticeable improvement? worth the update?

BT Versions
What version is the BT stack in this update?
Any improvments with BT out of memory errors?

I've downloaded this update. It has the same bluetooth version as 1.31WWE, no WMP10, but several DLLs like btagsvc.dll are newer. Radio is 1.02, which is obsolete.
Format of NBF files is changed, I've explained it in "hacking" section.
Extended ROM contains old apps, the only useful thing is WLANPatch.CAB. I don't know what RestartRadio.exe and AddContacts.exe programs do, maybe they also worth installing.
I've uploaded this update converted to the old NBF format to ftp://xda:[email protected]/BlueAngel/1.33.10WWE-from_SX66/
I have not tested it, so use at your own risk!

mamaich said:
I've downloaded this update. It has the same bluetooth version as 1.31WWE, no WMP10, but several DLLs like btagsvc.dll are newer. Radio is 1.02, which is obsolete.
Format of NBF files is changed, I've explained it in "hacking" section.
Extended ROM contains old apps, the only useful thing is WLANPatch.CAB. I don't know what RestartRadio.exe and AddContacts.exe programs do, maybe they also worth installing.
I've uploaded this update converted to the old NBF format to ftp://xda:[email protected]/BlueAngel/1.33.10WWE-from_SX66/
I have not tested it, so use at your own risk!
Click to expand...
Click to collapse
Restart Radio turns the radio on and off and addcontacts add's cingular's customer service and some other contacts, so I would definately say they are not needed.

AdmiralAK said:
How are DUN and SIM lock?
Any noticeable improvement? worth the update?
Click to expand...
Click to collapse
No SIM lock, using my AWE SIM;
Not sure how to check DUN;
NOTICEABLE better performance with BT headsets, Mot 810, 820 and Jabra 250, MUCH better, clear sound, cracking and static is GONE;
Worth the update? Hell ya.

WM6.1 WWE Lite - cooked ROM

This is Unofficial Cooked ROM. You need install Hard-SPL to your Treo750.
AT YOUR OWN RISK.
No QuickTour
No Palm BatteryIndicator
No PorkPie/CarrierDB.PXP
No Palm Messaging, MMS handler
No Speed Dial Options : Advanced Tab
Installation:
install Hard-SPL & Cheetah Unlocker
flash radio
flash OS
RapidShare:
ROM: WM6.1 WWE Lite
Radio: 1.54.07.00
Enjoy!

Hi, are you going to release this rom in different languages?

I'm making Treo750/Kaiser Japanese WM6.1 ROM now.
This WWE ROM is a byproduct.

chaimd said:
I'm making Treo750/Kaiser Japanese WM6.1 ROM now.
This WWE ROM is a byproduct.
Click to expand...
Click to collapse
Can't wait for the japanese version

chaimd - Fantastic job with this ROM! It is working great on my AT&T 750.

Thanks a lot.
I'm downloading it now.
By the way, how to flash the radio?

freakmax said:
By the way, how to flash the radio?
Click to expand...
Click to collapse
Just like OS - put CHEEIMH.nbh on card and reboot in bootloader

Thanks miloszz!
I've unlocked the spl already.
Do I have to unlock the radio before I flash it?
My treo is unbranded.

freakmax said:
Thanks miloszz!
I've unlocked the spl already.
Do I have to unlock the radio before I flash it?
My treo is unbranded.
Click to expand...
Click to collapse
No need to unlock the radio. After you finish hard SPL, you can flash Radio right away.
Many source said you should format your SD to FAT16, but let's chaimd confirm this.

I just flashed it.
Now I'm flashing the os.
My SD is FAT32 and working fine.

What ROM is this based on?

xenon_art said:
Many source said you should format your SD to FAT16, but let's chaimd confirm this.
Click to expand...
Click to collapse
Always it had to be FAT32 formated and never worked with FAT(16)...

doedoe said:
What ROM is this based on?
Click to expand...
Click to collapse
This is based on 2.23.

I flashed the radio file downloaded here .
I still got the Software version: TREO750-2.23-RWE and The Firmware version: 1.54.01.00. (under Settings>About>Phone)
Did I do anything wrong?
After flashing radio, I flashed the OS right away and then HR the device.
It should be 1.54.07.00 ,is'nt it?

I think it's wise to tell people that once they've flashed with Radio version 1.54.x they can't go back
Are there any screenshots from this ROM? I'm wonder what it looks like.

freakmax said:
I flashed the radio file downloaded here .
I still got the Software version: TREO750-2.23-RWE and The Firmware version: 1.54.01.00. (under Settings>About>Phone)
Did I do anything wrong?
After flashing radio, I flashed the OS right away and then HR the device.
It should be 1.54.07.00 ,is'nt it?
Click to expand...
Click to collapse
No, I had no trouble with 1.54.00.00.
That means only new version

I'll try it..
when I get home from work. But my radio version is 1.54.27 right now (it came with the TREO750-2.25-ATT software. Can I flash only the operating system?
Thanks,
Rudi

All I can say is "Dono arigato, Chaimdosan."

Does anyone have a list of changes?
I've flashed this ROM and it's very snappy!
Created the screenshots for those who wonder what it looks like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mccune said:
Created the screenshots for those who wonder what it looks like
Click to expand...
Click to collapse
Thanx, mccune

Problems with new Rom PLEASE HELP

hi i hope someone can help.
i have been reading the threads based around the new 1.56 rom,and am too having a few problems.
I was i was currently running duttys 2.6 rom using HSPL.
So i flashed the New released rom from HTC thinking everything would be ok, but all the colours were mixed up and was running alil slow, so after reading a few other posts, i tried to revert back to stock spl, i put 1.13 stock rom back on and used USPL as others have found this works.
My colours are still mucked up and everything is running slow still. I thought maybe i should have put stock 1.15 spl on but everytime i try that, the progress bar hangs at 0% and nothin happens. I want to start again fresh and removing everything and getting eveything back to normal.
i hope someone can help me out

The wiki contains a nice article summing all facts up.
A 1.56 rom doesn't work with any SPL below 1.54. Just look up your SPL version. I guess you haven't 1.54 at all.

johnpatcher said:
The wiki contains a nice article summing all facts up.
A 1.56 rom doesn't work with any SPL below 1.54. Just look up your SPL version. I guess you haven't 1.54 at all.
Click to expand...
Click to collapse
i have 1.54 installed, would it be worth going back to HSPL install Olinex again?

Still hanging at 0% why would the RUU do that?

Hey Benny,
had the same problem as you. Could recover my device by flashing the original (or as close as I could find) ROM.
Check for ROMs here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
And here is a thread describing the procedure:
http://forum.xda-developers.com/showthread.php?t=502167

ok so now an update..
ive managed to restore back to stock using the orange rom dump in the wiki.
and stock SPL 1.14
heres what the red writing says as i turn it on..
R 1.09.25.14
G 52.49a.25.26
D 1.14.22273
Ive then read through the tutorials and it says to flash a stock 1.56 rom now, ive tried doing this with both..
RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship
RUU_BlackStone_HTC_Europe_1.56.401.1_Radio_52.62.25.34_1.13.25.24_Ship
but both flash up ERROR 294 "Invalid Vendor ID" im currently on orange.

Looks like this???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

xenonone said:
Click to expand...
Click to collapse
yeah the home screen looks like that.

You have to install uspl 2.5 in order to install any other rom than stock rom
Bennyboy1985 said:
ok so now an update..
ive managed to restore back to stock using the orange rom dump in the wiki.
and stock SPL 1.14
heres what the red writing says as i turn it on..
R 1.09.25.14
G 52.49a.25.26
D 1.14.22273
Ive then read through the tutorials and it says to flash a stock 1.56 rom now, ive tried doing this with both..
RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship
RUU_BlackStone_HTC_Europe_1.56.401.1_Radio_52.62.25.34_1.13.25.24_Ship
but both flash up ERROR 294 "Invalid Vendor ID" im currently on orange.
Click to expand...
Click to collapse

ive just installed uspl with duttys latest uspl release but all the colours are fooked, im guessing that because my radio isnt the latest release.?

Bennyboy1985 said:
ive just installed uspl with duttys latest uspl release but all the colours are fooked, im guessing that because my radio isnt the latest release.?
Click to expand...
Click to collapse
I would think you have a 1.54 SPL down grade your SPL

ROM's tested on Jade 110 (Orange UK HTC 3G)

Has anyone tested any of the ROM's featured here on a Orange UK Jade 110 device.
There are many here that look great, Thanks to all the Chef's. But I don't want to risk it if it has been tested yet.
I have extracted my Jade 110 ROM already and started cooking myself, but being a beginner I am very wary, just in case I mess it up.
Any feedback would be great.

speedflyzz said:
Has anyone tested any of the ROM's featured here on a Orange UK Jade 110 device.
There are many here that look great, Thanks to all the Chef's. But I don't want to risk it if it has been tested yet.
I have extracted my Jade 110 ROM already and started cooking myself, but being a beginner I am very wary, just in case I mess it up.
Any feedback would be great.
Click to expand...
Click to collapse
I also have a Jade 110.
I've flashed a couple of ROMs without any problem. For me, the best is the Tommy's WWE 3.9b ROM. It works like a charm!

Thanks rockado.
I'll give it a shot.

rockado said:
I also have a Jade 110.
I've flashed a couple of ROMs without any problem. For me, the best is the Tommy's WWE 3.9b ROM. It works like a charm!
Click to expand...
Click to collapse
I second that

hi rockado and djp76...
I have a Jade110 as well...
can you pls tell me how you flashed the new ROM?
when I try to install Hardspl it say that it is not suitable for my device...
have already left a post to another thread for Olipro and cmonex, but still no reply.
I am trying to get rid of the stupid Orange ROM.
any help will be appreciated....
pls give me detailed description of procedure, if different of that that Olipro has posted, which Hardspl etc.
I have seen Tommy's WWE 3.9b ROM on youtube...looks greta but I was also thinking of the new EU upgrade by HTC itself.
Thanks a lot.

HSPL for Jade 110 chek here
hi
well sir u need to search and u will get ur answers
those who cant do HSPL for Jade110 chek on the below post ironeagle has given u the answers hope it helps
good luck
http://forum.xda-developers.com/showpost.php?p=4060869&postcount=45

morpheassx said:
hi rockado and djp76...
I have a Jade110 as well...
can you pls tell me how you flashed the new ROM?
when I try to install Hardspl it say that it is not suitable for my device...
Click to expand...
Click to collapse
I had that as well and I think its due to the HARDSPL not knowing what a jade110 is, still on mine it said it wasnt for my device but did i want to continue and I clicked yes and all is well phone has hardspl on and after that id imagine any jade rom would be fine. Im using the pdaviet 6.5 one and it flashed fine first time once i had successfully applied the hardspl.http://forum.xda-developers.com/showthread.php?t=530620

I have installed HARDSPL to my device with no issues.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ur spl is wrong @speedflyzz
hi
as per what i see the spl no is wrong if u have done HSPL it should show as 2.32.olinex shoud be ur new spl no after HSPL
speedflyzz said:
I have installed HARDSPL to my device with no issues.
Click to expand...
Click to collapse

what haree said that screenshot you gave doesn't show 2.33 so that pic is still softspl not hardspl as it needs to be

Here is the HARD-SPL you need :
http://forum.xda-developers.com/attachment.php?attachmentid=180417&d=1240774863

Can anyone post the stock 1.70 radio for orange jade 110 - thanks

RUU for HTC Touch 3G by Orange UK (Jade 110?)
It seems I kept reading the same posts every link i click. I actually tried one a couple of times and it says ; 'INVALID ID' - phew ... wasted time!
Can someone please post it clearly (by numbers!)
1. Where (the proper link) do you get the best RUU for Jade 110 from?
2. the clear or plain instructions for stupid like me.
3. the cost or the risks involved.
cheers!

hi
first do a HSPL their a stiky in this forum for the same
once u have done this u can flash any rom u want
also see below post i have given a link in the post
goodluck
http://forum.xda-developers.com/showpost.php?p=4107015&postcount=6
ORANGE079 said:
It seems I kept reading the same posts every link i click. I actually tried one a couple of times and it says ; 'INVALID ID' - phew ... wasted time!
Can someone please post it clearly (by numbers!)
1. Where (the proper link) do you get the best RUU for Jade 110 from?
2. the clear or plain instructions for stupid like me.
3. the cost or the risks involved.
cheers!
Click to expand...
Click to collapse

im gonna go ahead and say all roms should work on a jade110 once hardSPL'D the hardwares identical. reminds me of the nk402 and the nokia 5110 lol

Diamond2 dead after flash official rom / Turbo SW/HW not match

Dear All,
I flash a Diamond2 with official WM 6.1 ROM, after finish the phone stack on the tri-color screen, showing "Turbo SW/HW not match!". can any help help to save the Diamond2? Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom file name:RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_61.25t.25.19_3.44.25.27_Ship.exe
Rom: 1.40.832.2
Radio: 3.44.25.27
Protocol: 61.25t.25.19
Some member teacher me try to reflash TopazSPLRelocker SPL133 first, but when I reflash "TopazSPLRelocker SPL133", the phone can change from tricolor screen to progress bar but the phone stuck at 0%, than after several minutes PC prompt [ERROR 262]. I follow the program to recovery the connection but still the same.
Also I appear same problem which stuck at 0% when flash any cooked rom, e.g. Photon ROM 6.5 and TiGeR Light Ver 1.
I also try flashing by using Storage Card by rename the cooked rom (.nbh) file to TOPAIMG.nbh, the result is stuck on "Loading..." screen.0%.
I also try Advanced ROM Update Utility for TOUCH DIAMOND2/TOPAZ by Barin and "CustomRUU.exe" but still stuck at 0% and [ERROR 262], but it is success using official update exe (RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_6 1.25t.25.19_3.44.25.27_Ship.exe).
Update:
I found some people say this is the problem of radio version, but I cannot flash the radio only, it also stuck on the 0% using CustomRUU or stuck at "Loading..." using SD card flashing.
Thank you.
Bun

hinbun said:
Dear All,
I flash a Diamond2 with official 6.1 ROM, after finish the phone stack on the color screen, showing "Turbo SW/HW not match!". can any help help to save the Diamond2? Thank you.
Rom file name:RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_61.25t.25.19_3.44.25.27_Ship.exe
Rom: 1.40.832.2
Radio: 3.44.25.27
Protocol: 61.25t.25.19
Thank you.
Bun
Click to expand...
Click to collapse
That's because HSPL on your device already unlock ! try to reflash TopazSPLRelocker SPL133 first so CAN install the official ROM

Hakim Rahman said:
That's because HSPL on your device already unlock ! try to reflash TopazSPLRelocker SPL133 first so CAN install the official ROM
Click to expand...
Click to collapse
Thank you for your reply.
If I relock. Can I unlock it again? If can do you have link teach how to unlock?
By the way, is that mean I can install some cooked rom? Any good cooked rom for Diamond2 suggest? Thank you.

hinbun said:
Thank you for your reply.
If I relock. Can I unlock it again? If can do you have link teach how to unlock?
By the way, is that mean I can install some cooked rom? Any good cooked rom for Diamond2 suggest? Thank you.
Click to expand...
Click to collapse
of course you can ! enough to reflash with HSPL Unlocker in my referral link at the top
after that you can flash with any cook ROM

Hakim Rahman said:
That's because HSPL on your device already unlock ! try to reflash TopazSPLRelocker SPL133 first so CAN install the official ROM
Click to expand...
Click to collapse
Dear Hakim Rahman,
I try used TopazSPLRelocker SPL133, the phone can change from tricolor to progress bar but the phone stuck at 0%, than after several minutes PC prompt [ERROR 262]. I follow the program to recovery the connection but still the same.
Also I appear same problem which stuck at 0% when flash any cooked rom, e.g. Photon ROM 6.5 and TiGeR Light Ver 1.
I also try Advanced ROM Update Utility for TOUCH DIAMOND2/ TOPAZ by Barin and "CustomRUU.exe" but still stuck at 0% and [ERROR 262], but it is success using official update exe (RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_61.25t.25.19_3.44.25.27_Ship.exe).
Please help!!

Radio version
Dear All,
I found some people say the Turbo SW/HW not match problem was due to the wrong radio version.
I downloaded several HTC Diamond2 radio 3.44.25.27, 4.49.25.17, 4.49.25.57, 4.49.25.91, 2.49.25.204. But all cannot flash into the phone.
I using Storage Card by rename the radio rom (.nbh) file to TOPAIMG.nbh, the result is stuck on "Loading..." screen.
I use Advanced ROM Update Utility for TOUCH DIAMOND2/TOPAZ by Barin and "CustomRUU.exe" but still stuck at 0% and [ERROR 262].
The anther problem is that, in the red color part, any one know why the model become TOPA*** not TOPA100?? and NORM HW/TURBO SW but not TURBO HW/TURBO SW??