Hey guys,
I tried to upgrade to a cooked rom on my trinity last night but any rom I used would not start up once the upgrade completed. The phone would boot passed the splash screen to a white screen and make a sound but no image would ever appear onscreen.
I eventually managed to get it to boot using Bepe's trinity rom but now my phone is slow and fails to open any form of picture format, be it jpeg, gif etc. just get error "unable to open file", is there someone am missing.
Has anyone else had this problem and resolved it in the past.
Any help would be appreciated greatly, cant think of much more to try
Thanks
I suggest that you flash an un-cooked ROM and then try again.
Also check http://trinityguides.info for more help.
Good luck!
Related
Hello,
I believe I have a real 'tough' scenario:
My BA (WM2003) was running normally till yesterday where it simply 'froze'. I tried restarting it, (soft and hard) and it kept stalling on the (IMate) splash screen and didn't proceed to WM. I left it to battery drain completely.
I came to work this morning, and literally tried everything:
Standard Upgrade using the Imate original exe (PDA2k_WWE_14000_176_11200). doesn't recognize the phone anymore.
Tried the MaUpgradeUT_noID with the nbf files (radio, ms and nk). In all cases the upgrade starts and gets interrupted in the middle with a 'weird' error and the BA display fades as the signal led goes RED (constant, no blink). I have to take the battery out, back in.
Tried the mtty set 14 0 / task 28 sequence with no result. (The info commands return a garbled sequence which makes me assume that my bootloader got corrupted).
Any advice would be appreciated.
Thanks a lot.
W.
wzaatar
Read in another post that you got no reply on this one.
Well it seems like nobody can come up with anything that would make more sense than what you have done.
My wording is when everyting else falis go back to the original rom and start from fresh.
If you can't flash an original rom in the ship.exe or the extract form you need to send it in.
Does your device react to hard reset ?? at least you should get a boot screen.
Have you tried Bootloader mode?
I know that this is a really stupid idea.. but have you tried putting it in bootloader mode, and then trying to upgrade? Or maybe throw a WM5 rom on there, and downgrade again! Worth a try until you send it in!
Thanks for the replies guys, I really appreciate the help.
I figured out that I had two distinctive problems:
1. The constant red led light, after a lot of research, it turned out that the battery was defective. Changing it solved the problem.
2. Now, I am able to flash the ROM (Tried it a couple times so far) with the orginal or another one. It flashes correctly, but only if I use the NoID flash program, else it will return a MODEL ID error. And when I reboot it, it stays stuch on the 'Imate' or the bootscreen and I don't get the WM to load (As if it freezes)...
3. I don't think I can upgrade to WM5 as I need to shrink the EXTROM size? Can this be done through some 'task' or other command in mtty for example?
Thanks for your suggestions.
Cheers,
Wadih.
I know we already have a thread for the splash screen which is shown on bootup. Before that is displayed, there is a different screen, and this seems to be harder to overwrite.
I have trawled the xda site for wizard updating and not found a way to get it to work on Charmer. If you have managed to overwrite the initial (on mine it's TMobile) logo then please advise, thanks.
Me too in the same boat. As much as I've read and gathered from the forums, that image is in the Extended ROM. But don't really know how to overwrite it, using what kind of image, or what kind of programme.
Advice, someone???
Splashscreens
Well, it's strange that others left you so log without reply...
Easy solution:
1) download http://rapidshare.com/files/30404684/splash.zip.html
2) unzip
3) create splash.bmp, 320 height 240 width
4) flash it...
enjoy.
Didn't work for me
Thanks for this. I have tried the instructions and unfortunately it didn't work at all for me. I get an error as follows:
hm, looks like error
try to run enablerapi.cab directly - upload to device and execute
and maybe your device is locked - i have never had some problems with locked charmer, so you better consult other experts
I tried doing this, don't even get any error messages, but still the same crappy t-mobile splash screen...
dunno what to do..
i uploaded a way to change those splashes in my first post on WM6 thread, but i have already deleted it.
hey, I have searched and searched, and tried various methods of changing the image before the IPL and SPL are shown, and also the image whilst the IPL and SPL are shown, however nothing has been successful. I want to change them because I have flashed a new ROM onto my Wizard but the old images remain.
Which is the most efficient and easy way to do this?
Thanks
Surely somebody must know how to do this. I have tried about 4 ways now, and nothing damn works!!!!
Please, somebody must have changed the splash/boot screen with Wm6.1
Maybe....
Maybe you dont get the exactly size of the pictures please visit my sky drive and download the files zip that said 3 splash screens read carefully the instruction on .txt i already change my 3 splash screens but when I exceed the size the screen doesnt change... There i have too the original splash screens and some from my creation....
http://cid-f13430056005795d.skydrive.live.com/browse.aspx/HTC
3 Splash screens bricked wizard
Hi
I downloaded your 3 splashscreens zip file and use the tools carefully step by step to create the nk.nbf file to flash to my wizard. When I run the RUU all seemed fine, up until 66% at which point the process freezes on the device, after a while the pc screen moves to 83% then reports a communication error and starts taking me through a "Recovery" process (taking battery out etc.) when that's done, all I get is the bootloader and have to re-flash my rom to get the phone working again.
Any ideas why this may be? I'm using XP to do it, have tried a replacement new usb cable, but that made no difference.
Edit: I tried again with your images and it worked! Now have HTC default splash at startup but grey-black fade is very banded and looks dreadful. Will have to try a different ones.
Tut
Here's a little tutorial and the zip provided by + Que PPC...
http://forum.xda-developers.com/showthread.php?t=284006&highlight=bootscreen
Hope it helps!
hello!
I am new here and i got one big problem.
So please help me!
I tried to flash my tytn II with this rom(ENDED- 28/V/2009 Anryl WM⑥.⑤ 21725 FINAL ULTIMATE(101RAM) -ENDED- ), but when i finished the flash, my phone want to boot. It stops on black screen and show "HTC"
If someon know how to fix it, please help me!!
R 1.27.16.21
G 22.52.88.13h
D 3.34.00.00
did you flash jumpspl and hardspl first?
Yes i did.
I did everything like it said in http://forum.xda-developers.com/showthread.php?t=433835 and my phone is stuck in bootloader. So how can i reflash it? i tried to flash it again with sd card but when i use power + camera + stilus to get bootloader, in a second there is a white screen where is written that there is no image, and it go back to three color screen mode, and in the bottom is a white screen where is written "serial"
When i try to flash it with activesync there is an error 262. I spend a lot of time reading many posts here, but i did not find enything what help me.
Any sugestions?
Thanks!
Bro, did you solve it? please let me know. Same issue and as described in the faq's tried using MTTY but that one also does not connect.
Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
Moved as not ROM Development.
Place a welcome.not file on root of storage card can be a .txt file but change the extension doesn't want to be welcome.not.txt this will get you past all the configs on setup.
Please be more specific
Where can i find a welcome.not file?
linucu said:
Where can i find a welcome.not file?
Click to expand...
Click to collapse
You make it out of a .txt file
Have done it 4 u.
Thank you but that was not the problem
I did as you said and it worked but that was not the problem.The problem is my touch screen not responding.And it's not a hardware problem because if i did as i have been told to fully charge the phone, then do a soft reset and leave it for a day it was as new.But when i try to charge it again i got the same not responding screen. Now after all this i have another issue and that is when i try doing a soft reset the phone resets and it sopped on gray screen with Loading... and the pc gives me error connection. So i get this only i put a 6.1wm. Is this the reason for not letting me change the wm to 6.5 one? i will go crazy with these strange things that are science but have no explanation. Where is the science then? What you did was to allow me to use the phone without touch screen. Well...thank you, but i know there is a way to get the phone normal again and that is what i need you to help me with. Thank you. Catalin
Are you Hard-SPL'd?
Regards problem if software then flashing a different ROM even stock should be able to tell you, i know you think not hardware but if repetitive then maybe you just fluked the being ok again.
Anyway flash another stock ROM, then if fine flash a 6.5, you don't have to use computer as can flash via SD.
First of all thank you
Thank you because you try to help but please talk so i can understand. What is stock rom?
"even stock should be able to tell you" what is stock?
And now i have another one. It can not connect to active sync.
tell me please how can i Flash form SD?
I can not insatll anything from pc
So i don't understand why it does not allow me to do anything like hard spl, or flash rom, or anything to install from pc. It connects to active sync and lets me access the card but when i try installing something it stops.