Database Develop

Messaging storage

Is it possible to store sms, mms, emails directly into internal storage instead of main memory?

With emails and attachments you can, but i'm not sure if this is possible with the mms and sms.
For emailstorage onto your internal storage, first create a folder like mail or something else and create a subfolder \mail\attachments.
Then goto the registry with a reg editor or with total commander. Goto key:
HKLM\System\Inbox\Settings and create the following strings:
PropertyPath and set to \Internal Storage\Mail
AttachPatch and set to \Internal Storage\Mail\Attachments
Then reboot the phone and you're ready to start synching your emails and contacts.

Yup, thanks!
Hope someone can find a way to direct all incomings to internal storage.

Hi !
Try this, it *should* works :
Create registry key in "HKLM\Software\Microsoft"
In the new key ( "HKLM\Software\Microsoft\MAPI") :
Create a new string "DbPath" with value "\Stockage interne\SMSMail.vol" (for french) or "\Internal storage\SMSMail.vol" (for English, I think)
The "SMSMail.vol" is an example, you can use what you want !
Create a new string "AttachPath" with value "\Stockage interne\MAPI\ATTACHMENTS" or "\Internal Storage\MAPI\ATTACHMENTS"
Create a new string "PropertyPath" with value "\Stockage interne\MAPI" or "\Internal Storage\MAPI"
Soft Reset
Your SMS/MMS are on the internal storage !
You must change some other value in registry to have the MMS attachement on internal storage too
Look in "HKLM\Software\Arcsoft\ArcSoft MMS UA\Config"
If you test this, give me your result !

It doesn't show on tf3d anymore

SeaWaLK said:
It doesn't show on tf3d anymore
Click to expand...
Click to collapse
Strange, I make a test for you.
I create this value in HKLM\Software\Microsoft\MAPI :
DbPath = \Stockage interne\cemail.vol
AttachPath = \Stockage interne\MAPI\ATTACHMENTS
PropertyPath = \Stockage interne\MAPI
I put the entire content of "\Windows\Messaging" folder in "\Stockage Interne\MAPI"
I make a soft reset and ... tada ! SMS & MMS show in TF3D !
Where is the mistake ?
Seb = = = o>°o

All the older sms doesn't show however newer ones does.

igo8 piss..g me off plz help

hey guys.. i know there have been many threads on this igo8 program.. ive read most off them but still no help thats why i started a new post.. plz dont be angry..
what ive done..
transfered folder 2577 and IGO8 to my micro sdcard..
( dont know which version but i think its v.8.0it has australian map v14.. )
i then go into my micro sdcard then in there i open the sys.txt file and replaced the sys.txt "app="%SDCARD%/iGO8" with "app="Storage Card/iGO"'..
then i go to the folder 2577 then click AUTORUN.exe
i can see that the program is installing..install look completed..
i do a soft reset..
then go to the igo8 program..under start/programs.
click onto the Nav N Go iGO 8 icon then.....that round circle with the 4 colors start turning like it is loading.. and then ......nothing.....
guys what am i doing wrong??
im still on the stock rom that came with the phone ( oh i just upgraded my rom from the htc site)
but its still an official rom..
also on the 3 australian network
so can any1 help me plzzzz
thanks guys

Check the below thread:
http://forum.xda-developers.com/showthread.php?t=425702
try another version of iGO.

try this one.
i have mine set up the same, sd card/igo8.

This is a what i have in my sys.txt
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
resolution_dir="240_320"
vga=1
[rawdisplay]
highres=1
screen_x=480
screen_y=640
[gps]
Port=4
Baud=57600
[sound]
ding=0
[poi]
enable_pois_before_080217=1
[map]
3d_max_zoomlevel=500
3d_min_zoomlevel=40
3d_max_zfar=500
map_mode="3D"
auto_nightmode=1
3d_max_tiltlevel=9000
[debug]
skip_eula=1
smart_2d=1
enable_roadshadow=1
[device]
sdcard_dsk_num=7
You could also rename the file application.dat in the iGo8 folder on you storage card to igo8.exe - then create a shortcut with resco file explorer and add the shortcut to your start menu. You can now delete the igo8.exe that is on the phone memory. I did this on my TyTn to save memory and did the same on my Touch Pro and it works 100%

What could be happning is that IGO8 is mapping your contact list. Depending on how long the contact list is, it takes a long time to complete. After they get mapped, it really runs normally.

now kindda working
miffymiffy said:
try this one.
i have mine set up the same, sd card/igo8.
Click to expand...
Click to collapse
hey guys thanks for ur help with my igo8 install... igo8 now works and i also know what i did wrong.. all this time i created a folder on my micro sdcard called iGO8 then within that folder i installed another iGO8 folder.. thats why it didnt install.. after i got rid of the 1st igo8 folder the the program just installed..
now the igo8 works but i still have a little problem....i have major lag.. anyhelp would be nice guys.. thanks..

FYI ... iGo8 will run without installing the app. The autorun will add the correct registry entries for ROUTE TO within the contact application. It also adds the shortcuts to the windows start menu. But it will run directly from the SD card if you just make a shortcut.
However, what it also does it makes a copy of the sys.txt file in main memory. The problem most people have is after they have tried to install it once, the file has been copied and they only end up editing the one on the storage card. You have to have an exact copy in both locations for it to work properly.

Does anyone know the problem with the tapping sound?
If you enable the control of the light to be done by iGo then you get a repeating sound just like when tapping the screen..
Thanks in advance!

@opelaki
Open the iGO satellite view and you may see that that "click - click" is issued every time when the GPS receiver is polled (that green "LED" flashing, NOT the process bar). If THIS is the case close iGO go to settings - sounds and notifications - and disable "hardware buttons"

BladeStorm said:
This is a what i have in my sys.txt
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
resolution_dir="240_320"
vga=1
[rawdisplay]
highres=1
screen_x=480
screen_y=640
[gps]
Port=4
Baud=57600
[sound]
ding=0
[poi]
enable_pois_before_080217=1
[map]
3d_max_zoomlevel=500
3d_min_zoomlevel=40
3d_max_zfar=500
map_mode="3D"
auto_nightmode=1
3d_max_tiltlevel=9000
[debug]
skip_eula=1
smart_2d=1
enable_roadshadow=1
[device]
sdcard_dsk_num=7
You could also rename the file application.dat in the iGo8 folder on you storage card to igo8.exe - then create a shortcut with resco file explorer and add the shortcut to your start menu. You can now delete the igo8.exe that is on the phone memory. I did this on my TyTn to save memory and did the same on my Touch Pro and it works 100%
Click to expand...
Click to collapse
Take out the raw display, I had the exact same problem. I removed raw display, debug, and the 3d thing. I think it is raw display thought that is stopping you. Remove this entry from sys.txt and retry.

uglynip1980 said:
hey guys thanks for ur help with my igo8 install... igo8 now works and i also know what i did wrong.. all this time i created a folder on my micro sdcard called iGO8 then within that folder i installed another iGO8 folder.. thats why it didnt install.. after i got rid of the 1st igo8 folder the the program just installed..
now the igo8 works but i still have a little problem....i have major lag.. anyhelp would be nice guys.. thanks..
Click to expand...
Click to collapse
I went through the same drama's.
Now i have iGO installed, but have MAJOR lag.
Any idea how to fix it?
I also get the noise iGO makes when you touch something (Click sound) playing repeated over....and over....and over!

I am having the same problems with my fuze, i copy both folders over to sd card. and it goes through the install thing but will not start up. it just gets the wait cursor, then nothing happens at all. also on my x51v as soon as you pop the sd card in the autorun starts. with my fuze that does not happen

Move the folders iGO8 and 2577 to storage card
Navigate to 2577 on my phone via file explorer
Click AutoRun
After installation, navigate to the iGO8 folder on your storage card and run the iGO8.exe and it worked for me. I just copied that one and pasted in my programs folder and overwrote the install .lnk because it didn't work properly.
Make sure you did it in that process. I'm almost 100% sure that it should work. I have done it on 3 fuzes so far.
btw my SYS.txt is almost completely empty when I installed
Code:
[interface]
maxzoom2d=6000000
show_exit=1
[map]
2dheadup=1

MS Voice Command 1.6 over Bluetooth - Internal Storage Card

Installation
VoiceCommand over BT works by default when you install to "main memory".
If you install on storage card, you must use the following Trick:
Copy vcbthag.dll file from \Storage Card\Program Files\Voice Command\ to the \windows directory.
Open registry editor to: HKLM\software\microsoft\bluetooth\audiogateway\
- Edit the key: BTAGExtModule
- Set the value to \windows\vcbthag.dll
Power down your device and reboot.
Works smoothly on my Diamond. NO other Edits needet!!!
PS: Sound comes from my Headset! (Found at HTCWiki)
PPS: You have to do it over ActiveSync - otherwise you won´t find the DLL!!
Cheers
Free

igo 8 does not work

I have installed igo 8 and changed some things in the system file, but everytime when i start igo i get the message:
failed to open file:
ui_igo8\480_640\loading.bmp
exithing application
The phone i have is the HTC Touch Pro, the system file in igo 8 is:
[folders]
app="Opslagkaart/iGO8"
[device]
sdcard_dsk_num=7
[interface]
skin="ui_igo8"
resolution_dir="480_640"
maxzoom2d=6000000
minzoom2D=80
show_exit=1
[rawdisplay]
highres=0
screen_x=480
screen_y=640
class="landscape"
driver="GDI"
[map]
2dheadup=1
[3d_config]
roadsign_lines_per_screen=24
resolution_dir="480_640"
[sound]
mute_os_key=1
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=1
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
[msdn]
enabled=0

Pinraiser said:
I have installed igo 8 and changed some things in the system file, but everytime when i start igo i get the message:
failed to open file:
ui_igo8\480_640\loading.bmp
exithing application
The phone i have is the HTC Touch Pro, the system file in igo 8 is:
[folders]
app="Opslagkaart/iGO8"
[device]
sdcard_dsk_num=7
[interface]
skin="ui_igo8"
resolution_dir="480_640"
maxzoom2d=6000000
minzoom2D=80
show_exit=1
[rawdisplay]
highres=0
screen_x=480
screen_y=640
class="landscape"
driver="GDI"
[map]
2dheadup=1
[3d_config]
roadsign_lines_per_screen=24
resolution_dir="480_640"
[sound]
mute_os_key=1
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=1
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
[msdn]
enabled=0
Click to expand...
Click to collapse
The first thing iGO 8 does when you run it is show the loading screen. Is your "[folders] app=" line pointed to the right directory of where iGO is installed on your phone? Where is: Opslagkaart?
I have it installed on my SD card and my setting is:
[folders]
app="%SDCARD%/iGO8"
All I have in my sys.txt is [folders], [interface] and [timezone], running version 8.0.0.49545. Everything works great for me.

thanks for your request!
opslagkaart is the same as SDCARD, its a Dutch word.
So my folder must be:
[folders]
app="Opslagkaart/iGO8"
I changed de sys.txt file as you said but it doesn't work eighter.
So any other possibility's ?

app="Internal Storage/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
skin="ui_igo8"
resolution_dir="240_320"
vga=1
[device]
sdcard_dsk_num=7
[rawdisplay]
class="portrait"
[map]
2dheadup=1
[msnd]
enabled=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=0
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
Here is a working sys text for my touch diamond,
I think you need to use the 240x320 directory 640x480 is not supported.
Also the high res is for touch hd.
You can try this sys text but change the storage card as per your device sd card ( first line) and leave the rest as is.

add vga=1 to [interface]
or
open up yor data file and see if it has a folder with that resolution. If not, update your data file.

Oke, again thanks for your answers, but stil doesn't work!
I copied the sys.txt file from Londontownguy to my system file and it seems to work............... seems!
when i start the igo8.exe i got the startsceen, then the system go back to the igo8 directory and nothing, the system stand still.
When i start the .exe file again i got the message:
previous instance of iGO8 has not finished exiting yet.
please try again in a few seconds or soft-reset your device.
something in the sys.txt file is still wrong?

This is baffling maybe something is missing in your files, maybe try
app="%Opslagkaart%/iGO8" ie with the percentage marks as previous poster quoted

I tried the marks % in the folder app=/%Opslagkaart%/IGO8, but guess not working............
what seems to be simple...............
i realy dont know anymore.

Just stopping by
Pinraiser said:
I tried the marks % in the folder app=/%Opslagkaart%/IGO8, but guess not working............
what seems to be simple...............
i realy dont know anymore.
Click to expand...
Click to collapse
I was just reading through cause I'm hoping to give this app a try.
Not to nitpick if it's just a typo but I believe he recommended using:
app=%Opslagkaart%/IGO8
and NOT app=/%Opslagkaart%/IGO8
Single character can mess it up, you know.

sc00basteve said:
I was just reading through cause I'm hoping to give this app a try.
Not to nitpick if it's just a typo but I believe he recommended using:
app=%Opslagkaart%/IGO8
and NOT app=/%Opslagkaart%/IGO8
Single character can mess it up, you know.
Click to expand...
Click to collapse
app="%Opslagkaart%/iGO8" try also with the " " added, unless there is another difference with the raphael and diamond I thought it was only the sd card. It took me ages to get compile the right sys text I kept getting the same errors. My sys text works on latest 8.3 and also 8.0. Maybe there are some other files missing.

Wait
Wait wait !
In french, we have a sentence : "Ne pas mettre la charrue avant les boeufs"
Your error message only tell us that igo don't find a file.
First thing : how do you installed igo ?
I could see two things in your case :
- maybe there is another ini file in the main memory, program files folder, of your device and the one on storage card is not used
- maybe the link on the start menu that you use try to go to another folder than storagecard\igo8
Try to run igo directly from the folder on your storage card by launching the app from file explorer.
Kinds regards

Your data.zip (or your skin file) has not the apropriate files for touch pro resolution.
Try a diferent data.zip that works with your iGO8 version.
If you accidentaly choose a skin that does not work with touch pro when you last run iGO8, and after restart does not start anymore, just go to \Storage Card(..whatever)\iGO8\Contents\Skin\ and delete it. It will start with the default skin.
Good luck.
Edit. My sys.txt has nothing related to 640x480 or 480x640.
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
[rawdisplay]
screen_x=
screen_y=
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
[3d]
show_guidance_strip=1
show_guidance_arrows=1
guidancearrow_first_size=1.5
guidancearrow_first_alpha=24
guidancearrow_second_size=0.8
guidancearrow_second_alpha=12
[map]
3d_scale_carmodel=1
3dcarsizemin=2500
3dcarsizemax=4000
3dcarsizemul=30000
[roundaboutcam]
enabled=0
centery=20
[dynamiccompressor]
compressor=1
ratio=9
gain=9
[sound]
ding=0
queue_length=200
mute_os_key=1
[debug]
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400

Thanks for your reaction freco
i tried your sugestions, but the directory content was already empty!
In copied your sys.txt to mine and started the aplication and get the following message:
Program application database cannot be found. Please insert original application SD card.
The sys.txt file begins with:
[folders]
app=%Opslagkaart(stand for SDCARD)%/iGO8, is this the sentence where it goes wrong?
Jena

Pinraiser said:
i tried your sugestions, but the directory content was already empty!
Click to expand...
Click to collapse
Folder Content should not be empty. It has to contain the following folders,
Building -> (files to see buildings on the map, can be empty though)
Dem -> (file to see mountains etc, can be empty though)
Lang -> (Language files)
Map -> (Map files)
Poi -> (Poi files)
Scheme -> (Color Shemes)
Speedcam -> (Speedcam database)
Voice -> (Voise files)
Skin (optional)
Pinraiser said:
The sys.txt file begins with:
[folders]
app=%Opslagkaart(stand for SDCARD)%/iGO8, is this the sentence where it goes wrong?
Jena
Click to expand...
Click to collapse
Maybe that 's the main problem. If you open a file explorer what is the path to iGO8 folder? Try to write this path at app=
This works fine for me too
[folders]
app="/Storage Card/iGO8"

freco said:
This works fine for me too
[folders]
app="/Storage Card/iGO8"
Click to expand...
Click to collapse
freco,
I tried again your suggestions, and i thought i was a step closer? but ........
The folder content has the folders you named, so....
the path to igo8 folder i looked for and i make a change for that.
And i must say he starts when i dubbel click the igo8.exe, but then he return to the folder where igo8. exe is and nothing happen further.
need i say more..............

Did you run iGO8 setup? Returning back to explorer means does not start.

i cant get igo8 to work on my Fuze either! its driving me insane. it looks like it is about to open up fine and then it just shuts off. i have tried everything u guys have suggested here, please let me know if you find a solution.
thank you =/

techkills said:
i cant get igo8 to work on my Fuze either! its driving me insane. it looks like it is about to open up fine and then it just shuts off. i have tried everything u guys have suggested here, please let me know if you find a solution.
thank you =/
Click to expand...
Click to collapse
sent you a pm

freco said:
Did you run iGO8 setup?
Click to expand...
Click to collapse
what do you mean with, did you run iGO8 setup?
I copied the whole iGO8 directory to my HTC touch pro SD card and double clicked on the iGO8.exe file (and offcourse i changed the system.txt file)

Check your PM.

Ig0 8

GO 8
For people who have a HTC Diamond and iGO 8 not getting working.
Install procedure:
1. Unrar the content of the archive (2577 & iGO8 folders) into your Internal Storage
2. Start autorun in your phone
3. After starting up the program delete the 2577 folder from Internal Storage
OR
1. Unrar the content of the archive (iGO8 folder) into your Internal Storage
2. Rename application.dat to iGO8.exe
3. Open SYS.TXT file located in your IGO8 directory and edit the following section to it:
[folders]
app="%SDCARD%/iGO8"
;app="Internal Storage/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
TO
[folders]
app="Internal Storage/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
Don't forget to translate "internal storage" in the phone user interface language. For example in french the line:
[folders]
app="Internal Storage/iGO8"
TO
[folders]
app="Stockage interne/iGO8"
Upgrade procedure (Not 100% sure if working):
1. Start from scratch, and follow the procedure described initially.
2. The first time it says that an "older version exists in your card, do you want to downgrade?"
3. Press yes.
4. A message appear "a newer version exists on your card. do you want to upgrade?"
5. Press yes.
6. Another message appear "older version exists in your card, do you want to downgrade?"
7. Press NO
Settings for GPS:
Go to Settings - GPS Settings, select Port 4 and Baud Rate 57600 or 4800, don't forget to enable GPS also in the settings
OR
In iGO8 at GPS settings select auto search at right bottom and enable GPS
POI:
I can't see POI in iGO8 even if i have in \content\POI:
If you have POI in the content with extension .kml, it wil not work because its an older version. The newer version of POI is with the extension .poi
Paths:
Voice: ....\iGO8\content\voice
Speedcam: ....\iGO8\content\speedcam
Skin: ....\iGO8\content\skin
Scheme: ....\iGO8\content\scheme
Poi: ....\iGO8\content\POI OR \iGO8\content\userdata\POI
Phoneme: ....\iGO8\content\PHONEME
Map: ....\iGO8\content\map
Languages: ....\iGO8\content\lang
Dem: ....\iGO8\content\DEM
Building: ....\iGO8\content\BUILDING
Others:
Annoying Tap Sounds: In iGO8 Settings - Sounds -> Key Sounds you can put the button click volume to zero
Backlight Problem: In iGO8 Settings - Device -> Choose the Power Management Backlight Always On
iGO8 shortcut to the Touchflow3D Program list: make a shortcut of iGO8 to windows\start menu\programs and then you can see the icon there when adding a new shortcut in touchflow3D after choosing it:
Simply copy iGO8.exe, go to the folder in which you want to put the shortcut, activate the context menu with a longer press of the stylus on the screen and choose Paste as shortcut.
OR
You can create the shortcut on PC with an Active Sync connection.
1. Establish ActiveSync connection between the device and the desktop computer.
2. Explore the Mobile Device folder and browse to the folder which contains iGO8.exe
3. Right-click on the file and select Create Shortcut menu item. This will generate a shortcut (.lnk) file in the same folder.
4. Move or copy the shortcut if you want it anywhere else on the device.
iGO 8 VGA Display:
sys.txt
[interface]
skin="ui_igo8"
resolution_dir="320_240"
vga=1
[rawdisplay]
class="landscape"
[debug]
skip_eula=1
enable_roadshadow=1
[map]
auto_nightmode=0
[msnd]
msnd.start=0
If you have some problem and fixed, let me know to add here on troubleshoot
tried all this but cant get it to work any ideas?

add this to your sys.txt file in igo8 directory
Code:
[device]
sdcard_dsk_num=7