Related
PLS forget this, after use BT head set several time, the same problem had been happened! Sorry about this!
BT Head set problem of un-resume with incomming call when the device is suspending. how to fix!
@;Download XDA2s_1-12-178-WWE_UK_Extended_ Rom.zip from below.
http://forum.xda-developers.com/viewtopic.php?t=13072
@And extract the zip and find BA_OEM_PD_BT_Headset.sa.CAB
@Copy&Past BA_OEM_PD_BT_Headset.sa.CAB into Blue Angel and tap it to install.
@Make worm reboot and you can already finish work for replacement the new version of BtCEStack.dll (V1.604)
@@@You can also download same CAB file (but i renamed to BT_Headset.cab) from http://www.asukal.jp/BT_Headset.CAB
Now Blue Angel had became the All Mighty Machine!!!! Enjoy it!
you can see same summary on my Blog
http://asukal.seesaa.net/article/1182756.html
Also you can see how to get the missing function of dial network client service on BlueAngel (replacment of the BTWIzardPrifile.dll)
http://asukal.seesaa.net/article/1031857.html
Attention for this thread
PLS forget this,
after use BT head set several times, the same problem had been happened!!
(sometimes effective,but sometimes not effective,also sometimes auto resume the device.not sure it`s side effect or natural function of this patch)
If you want to try this, plese dont forget it is your own lisk!
------------------------------------------------------------------------------
*for The Guys who already installed and wishes to uninstall due to some side effect. You must delete them manually with following steps.
@If you are using BT function, please turn off the BT, and make worm reboot it.
@Connect IIs to PC with Activesync, and use PC explore (Or use failer which can access dinamic librallies on IIs)and find following 3 files in the windows folder of IIs.
BTAudioGW.dll
BtCeStack.dll
HFPUI.exe
@Rename them to the names to eazy find them in next step（Example;"a" or "1", and make worm reboot again, then you can delete it. You can not delete those 3 files without rename. They were untachable.
@Make it worm reboot again. it have finished already and return to the default!
has anyone found this to work?
Has this worked for anyone? This is the biggest problem with the PDA2K...
Didn't work for me. This BT Headset problem really is a pain.
We were all looking for a solution to the voice dialling problem with the BT Headset on the XDAII and there's no solution to that.
Now a year on, a new 'improved?' model and to cap it all there's no solution to even getting a reliable BT Headset connection!
Now new test of solution
http://asukal.seesaa.net/article/1204039.html
Please watch my test!!!! but i am still not sure for myself!
Somebody please post your result with OzBT
Now my bluetooth head set still working with this ozBT.
But i think my result can't say it all for you,guys.
if somebody tried this, pls post your result, worked or not! Please.
After 3 days test, its workable for ME
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
BT headset problem
Thanks vey much for all this work trying to resolve this Blue Tooth problem. However, as a newbie with my Tmobile MDAIII, where can I get official upgrade files, ROMs, etc. unless it is only from this site? In other words,
is there a Blue Angel support site in English anywhere?
Thanks!
I follow instruction of Asukal and now BT headset are usable after standby of pda2k.
Now the only problem I have are that sometimes ppc wake up without motivation. the problem was present also before use ozbt and O2 patch.
Thank you Asukal!
BT headset problem
I've tried and it works fine with jabra 250 and kondor bt 25.
Thanks Asukal you solved my big big problem.
Thanks Again :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Re: After 3 days test, its workable for ME
Asukal said:
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
Click to expand...
Click to collapse
Sure it did Asukal :lol: , don't know what to say,
thaaaaaaaaaaaaaaaank youuuuuuuuu
works great on my Qtek-9090
good work :wink:
thanks guys!
Appreciated your posting, guys!
since my last post, noboday reported my work was usefull or not.
i have been afraid i am about to become a faker! :wink:
And glad to hear that was worked for you guys!
But please do not forget, sometimes suddenly fail to reconize BT head set.
, then you can re-detect it again, you can use it again.
Do not panish me if that time come please <very little probablity>
Answer to the Mr,Guest>
@this blue tooth patch was downloaded from this forum
@you had better not to inquire anything to the XdaO2IIs support center, they are not specialized mechanics for the PDA, but just a mobile phone serveice center, they will replay you with quite different solutions to your question, it make you worth. this is my suggestion.
Mr,ilvanni> auto wake up without any motivate.
Yes i knew it, but it was not coz of OzBT, but coz of BT patch. before i tried OzBT, it also happened with BT patch. Hope you watch the battery.
--------------other way of solution for this--------------------------
Some Thailand Guy said, use the softoware to turn off the screen(but the windows is runnning), works for this BT head set problem, too.
You can try this,too. (i forget to the name of soft---may be "Screen OFF" or something like that.)
but sorry i didnt try this. need much more attention for the battery.
Re: After 3 days test, its workable for ME
Hi Guys,
I'm a bit new to this pocket pc business. I can see where your coming from, but when I try this my screen, particularly the Todat screen, wont refresh properly, ie you cant read it!
Any ideas?
Sorry i cant catch what you want to say exactly,i guess two situations.
#1;Does it mean today plug-in soft were can`t be appeared aftre wake up?<with using ozBT>
On IIs(or PPC2003) has some non-conpatible with the previouse version of Today Plugs-in Soft<World Today, tAgenda, or exToday,etc>
#2;or does it mean IIs can`t return to windows? some like freeze with susspend? if this case, i have no exipierience about that yet. sorry.
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Anonymous said:
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Click to expand...
Click to collapse
Switching the Today background to something else, them back again, sorted this for me.
Today programs disapear
Now i got it.
i think it was coz of the New OS, even without those patch, some times happen to me.Or memory condition. Blue Angel lost memory very quick and be stacked easly(too much devise resources--wi-fi,bluetooth,keyboadm many hard bottms--- used i think)
(Himala upgraded with 2003Se is better)
the solution fo this,Mr,Sparkeyxda has right answer, i also try to open option----today---and off/on today plugs in, then return to today. they will come again.
I think it coz of un-compatible of old today programs.
So this moment, i gave up use some of Today programs.
sorry if someboday have better solution, please tell him!
I had the same problem and changing the theme back and forth like sparkyxda solved it for me.
is this worth trying on QTEK9090 ?
The bluetooth problem on 9090 is that whoever calls 9090-user wih BT headset, will hear him/herself really well.. it is as if the audio that is suppoed to get to 9090-user-ear *also* is sent back as if that was somthing 9090 used said. very clear audio loopback
Hi Akusal i wonder if you are working to solve the BT hands free problem & if you need anyhelp testing devices or SW i can do that
I'm sorry if this has already been posted somewhere but I couldn't find anything on it. I finally got around to installing this on my MDA using it with the SonyEricsson's SBH-662 (or something like that). The original Voice Commander responds rather quickly but with the VC 1.6, I have to press that button on my BT headset 6 times just to get the voice prompt. Is anyone else experiencing this problem?
nxZEN 5500 and MS Voice 1.6
My MS V works near flawless. I hold the button for about a second and I hear the beep in my earpiece. Recognition and response greatly improved.
You DID install to the device and not you storage card, right?
Dr Puttingham said:
My MS V works near flawless. I hold the button for about a second and I hear the beep in my earpiece. Recognition and response greatly improved.
You DID install to the device and not you storage card, right?
Click to expand...
Click to collapse
I have to agree VC works very well even better than version 1.5. From what i have heard you can now install to the storage card but perhaps we are seeing the results of doing so. When I first read the title to this thread I said to myself hmmmm. I do think that this version is just a little slower than the previous one but it may just be me anyway overall I'm quite happy with the way it works and think i will most likely buy a copy for my wife's SDA she keeps asking for it.
Kirby
This is what I'm experiencing:
the MDA goes turns off (screen is off). I press the BT button on my headset to activate VC and the MDA turns on. the problem is that it doesn't get out of the My Info screen. If I get out of that screen, I'm alright.
Wordaround:
1: go to Start->Settings->Owner Information
2. proceed to Options tab.
3. Untick "Identification information" under "When the device is turned on, display:"
I guess no one has that ticked.
PS: This is also true if you have your device pswd protected. You will have to press the BT button again, after you have entered your password.
LordPhong said:
This is what I'm experiencing:
the MDA goes turns off (screen is off). I press the BT button on my headset to activate VC and the MDA turns on. the problem is that it doesn't get out of the My Info screen. If I get out of that screen, I'm alright.
Wordaround:
1: go to Start->Settings->Owner Information
2. proceed to Options tab.
3. Untick "Identification information" under "When the device is turned on, display:"
I guess no one has that ticked.
PS: This is also true if you have your device pswd protected. You will have to press the BT button again, after you have entered your password.
Click to expand...
Click to collapse
I don't want to sound harsh here, but this has to be said in the most realistic form possible...
READ THE MANUAL!!!!
But since someone else will probably ask the same question a million times i'll copy and paste the information from the manual for you...
The Voice Command Button doesn't work when the password screen is displayed - The password screen blocks the Voice Command Button to avoid other people from placing phone calls while your device is locked. To enable, uncheck the 'Password Protected' option. Note some organizations prevent this override from working due to increased corporate security measures.
Click to expand...
Click to collapse
Honestly in the future read the manual it will make you look wiser and make people like me less upset.
I did get a hold of the manual after the post and realized that check box. However, that tick does not help by pass the "My Info" screen. I still have that problem. Hence, my workaround.
LordPhong said:
I did get a hold of the manual after the post and realized that check box. However, that tick does not help by pass the "My Info" screen. I still have that problem. Hence, my workaround.
Click to expand...
Click to collapse
If your workaround fixes it then it can serve as a resource for people when the manual isn't working...
I recommended the manual simply because i had the problem when i first installed VC 1.6 and after ticking the checkbox, as mentioned in the manual, the problem was solved for me.
My specs are as follows...
T-Mobile MDA (USA)
Official T-Mobile 2.26 ROM
Plantronics Discovery 340 BT headset
I have no problems with BT and VC 1.6.... I haven't changed my owner info or my password protection. The headset wakes my phone from standby and is ready to go when i press the button on the headset.
frazell:
you're a freaking moron. I said what I said in the followup because it's supposed to help you if the program isn't doing what it's supposed to do. I don't know where you've been but this happens in the software industry. The manual says one thing and the software does something else. As a software developer, this i DO know.
Here are MY specs:
MDA
Offical Tmo's 2.26 /w radio 2.47 <-- that might be the culprit
opmap
SE HBH-662
BTW, the manual ALWAYS works (unless you have problems opening up doc files or ur doc file is corrupted). It's the freaking program that doesn't work according to what the manual says.
25 years in the world of IT/software R&D have taught me that often times the developers and the people doing the documentation sometimes don't communicate very well.
Kirby
Hi all, my first post here. I have had my Kaiser now for about 3 weeks, its going well but I have a few questions.
On my old Moto, I had a bleep that sounds every 30secs if I had a text message or missed call alert. Is there a feature like this? Its very useful.
I can't seem to find the TV or VOD in the T-zones.
Is there a quicker way of sending a text instead of doing Messaging, New, SMS etc..??
Anyone used Bluetooth Audio program to send all sound to the BT headset (like MP3s)? Handy for when I am using my mono BT headset.
Is there a program that will switch off the phone and BT overnight and back on in the morning on a sked????
My Kaiser is a UK unlocked handset all as standard.
Now just waiting for Krussel to bring a case out for it. I have e-mailed Krussel and PDA Addons but got no reply.
Thanks all for the help.
P.S Tomtom have refused to support me as they say the TyTN 2 is not a supported product.
As far as the beep on text message alert I use PhoneAlarm. It will let me set the notification time interval as well as how many times it repeats itself. I also use Kaiser Notifications by Phil_UK LED notification program to change what LED's blink for missing Texts, emails or calls.
Read this thread: http://forum.xda-developers.com/showthread.php?t=328596
As far as TomTom goes, I called them and they say that they dont support any WM6 phones as the front line guys have not been updated on WM6 yet. I think they may want to get on that in all honesty.
And I have no idea what you are talking about here:
I can't seem to find the TV or VOD in the T-zones.
Click to expand...
Click to collapse
It was the 3G TV on T-zones and also their Video on Demand (VOD). Thanks for the other info.
Guys, regarding tomtom. They do support the Kaiser/TyTn 2. BUT, you must tell them that you have installed THEIR specially adapted tomtom version designed for the TyTn 2 and that your installation disk has their logo on it. It seems their staff have not been informed about this in many cases. However others who have been persistent have been successful. Ask the person to get their supervisor.
By the way the tomtom software and GPS is pretty straightforward and works well, so if there's a problem - report it in one of the GPS threads here and you may well get an answer.
Mike
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
holding....
holding....
you write with brilliance
I'm happy somebody made this thread good work.
Fantastic Article Bengalih!
One added request. It would be great to include, perhaps in a text attachment, ms voice command's list of progam files and registry entries.
Seperate by the two primary versions for 1.6.
The information would invaluable for cooks to go back into a clean rom and clean out left over files and registry entries or allow them to strip the full version out if they wish to upgrade it or leave it out entirely.
Left over files/reg entries may as you know cause issues when adding or upgrading the ms voice.
Tayton said:
Fantastic Article Bengalih!
....
Click to expand...
Click to collapse
Added to guide.
List of File and Registry Entries for Voice Command
place holder
Cancel VC announcement while In progress?
Bengalih, Great write up!
Is there a way that you know of to cancel VC's announcement mid stream? That is to say, there are times when VC will start to announce an email, or read SMS while I am on a call and I would like a way to shut it up quickly. It is terrible when you are on the phone with client A and your phone starts to announce a call from client B, or even worse sitting quietly on a conference call and it starts reading an SMS... Some how this always bleeds through my BT headset so the person I am on the phone with hears it.
Thanks!
crussell
crussell said:
Bengalih, Great write up!
Is there a way that you know of to cancel VC's announcement mid stream? That is to say, there are times when VC will start to announce an email, or read SMS while I am on a call and I would like a way to shut it up quickly. It is terrible when you are on the phone with client A and your phone starts to announce a call from client B, or even worse sitting quietly on a conference call and it starts reading an SMS... Some how this always bleeds through my BT headset so the person I am on the phone with hears it.
Click to expand...
Click to collapse
crussell. Thanks for the vote of support. Unfortunately the issue you describe plagues me as well. I don't think there is anything wrong with the software and by this I mean it isn't a bug, just something the developers didn't think through very well.
There are only two ways to stop the incoming announcements:
Turn them off
Check the box in Notifications that says "Only during free time"
What this box means is that if you have an appointment in your calendar that sets your free/busy disposition to "busy" then announcements will not come through.
However, if you get an incoming call you will still get the call waiting beeps which can be just as distracting (if anyone knows how to turn these off please let me know...they are unrelated to MSVC).
So, if you know you are going to be on an important call you can first go into your calendar and make an appointment and set your time to busy.
The only solution I can see, short of a new version which takes these things into account is if someone can figure out how to fool the system into thinking your time is "busy". I don't know if MSVC looks for a registry flag or if there is a free/busy connector (API) that it taps into. If someone could make a little app that would toggle free/busy time that would be fantastic. Unfortunately I cannot code for WM to this degree.
AHA!
I take back what I said...at least the part of me not knowing how to fix it
There does indeed appear to be a registry location that records your current free/busy status.
I have written another script tool which will perform a toggle of your free/busy status effectively turning off any incoming announcements when toggled off.
Check it out here
ROM: 1.62.502.0 (ATT Tilt Shipped ROM)
MSVC Version: 1.6.17913
Bluetooth Headset: Motorola 89199N
Description:
Sorry if this is the wrong place to post this, but I've stopped using MSVC on my Tilt via Bluetooth because 3 of 3 times I've messed with this (getting battery status, call person, etc type commands) I've found later that the phone won't dial out or receive calls anymore! First two times it happened I was a bit puzzled, but the third time it clicked that it only happened sometime after initiating a call or such via MSVC with Bluetooth.
Anyone else noticed this? I find it odd that it'd freeze up the phone portion of the Tilt, but it does 100% of the time for me. IIRC, hitting the Green button shows the Phone titlebar and menus but the screen itself never draws. I can hit the OK button to get back to the Today screen, and the Phone app is listed in the list of applications running I believe, but it won't die and won't work until I do a reset.
I installed MSVC from a CAB here on this forum, and it generally works but this problem with bluetooth is pretty annoying as the main reason I wanted to get the program is to do bluetooth commands for dialing.
The more I think about it, it's possible that using the bluetooth commands then doing "run command suspend" (I think that's the syntax, it's been a few weeks since I tried it last) to turn off the Tilt immediately might also cause it problems. I was doing that because otherwise it stays on for quite a while, when it seems to me it should turn itself off fairly quickly.
I'll try your new version and edit-back
I have never experienced this issue with MSVC. I have tried it out successfully on at least half a dozen ROMS.
Although I am not intimately familiar with the inner working of code in either MSVC or WM in general, I don't know really know how this could interfere.
Other reported issues with MSVC involve:
Audio gateway being left open
Radio going dead
I'm also not sure how MSVC could interfere with the radio....
My first thought is Don't Blame MSVC!
I say this since I (and many other's) haven't had problems with it...it obviously is a program that CAN function properly.
If you are using a cooked ROM that has MSVC built-in or you are installing it from scratch, read through this whole guide and make sure you understand and update/tweak your copy.
I would recommend installing the latest version I have posted 1.6.19290 as I have already had reports of this clearing up some people's issue.
When posting problems regarding MSVC in the future, please refer to the main thread posts, where I will detail the information you should provide.
Let me know what you come up with!
I've got an issue I can't find an answer to. I have MSVC installed on my Tilt and it worked fine up until about a week ago. Since then I can initiate MSVC via my bluetooth headset but get no audio for the prompts (i.e. the ding to tell me it's ready for input, the audio confirmation for who to call).
Also, notifications stopped working via bluetooth. I've checked all the settings and everything is fine, they're exactly as they were when VC was working properly. I've tried uninstalling and reinstalling and deleting and repairing my headset. Nothing seems to work.
Any input on this would be greatly appreciated.
Hi all,
First and foremost, my apologies to all if the subjects in this post have been covered elsewhere. I've had this 2nd hand phone for only a week and I find absolutely great. I have spent the most of the last week searching forums and websites for information. Learning about new technology is something I enjoy thoroughly.
I can connect it up to my PC via USB and BT without a problem. It will connect to my WLAN without a worry. I will probably have more questions on those subjects later.
The 3 main problems I have are to do with are (1) the SIM Manager and (2) the speakerphone volume.
The SIM Manager problems are to do with:-
(a) duplicate entries after copying SIM contacts to the phone,
(b) not being able to choose between SIM and phone as to which contact list to use and
(c) not being able to edit those phone contacts on my PC like I could with Nokia's PC Suite.
(1) As far as (a) is concerned, I used "Kaiser SimFix" as suggested elsewhere in these forums and it worked a charm until I turned the phone off. It then went through the process of updating itself. After the update and seeing "UPDATE SUCCESS" at the end of several lines of tasks I found that I had to remove the battery and put it back in after a reasonable period (and yes I do know about powering down such things and waiting for the system to drain residual power) and found that the system decided to do a fresh install of the OS and everything else. Consequently, I lost all my settings and the "Kaiser SimFix" CAB file and it's effects. Any help on this problem would be greatly appreciated.
In regards to (b) is there any solution at all?
As far as (c) is concerned, is there any software out there that will let me do this?
(2) In regards to the speakerphone volume, I have read about several registry hacks here and there that seem to have some effect on this problem but I don't think this is a viable solution as, from what I have read, if you turn the phone off you have to do the hack again. I don't want to be doing this all the time.
Are there any permanent solutions to my problems anywhere, other than buying the latest and most expensive of the new toys (which I would do if I had the money )?
Cheers and many thanks in advance for any answers.
Graeme
There are several solutions to your problems.
Get advanced config (do a forum search) or sk tools (commercial, google is your friend). Both provide settings whether to show sim contacts or not.
You can synch your contacts with outlook and edit them there.
There is a software floating around in the xda forums to improve speaker volume. Once again a search will help.
Hi altae,
Thanks for the qiuck reply.
I downloaded and installed the "Advanced Config" CAB and all went well until I went to launch the program itself. I then got a message saying I need to update my version of the .net framework. Am I correct in saying I'd have do that first? If so, how and where?
As far as using outlook is concerned, for private and personal reasons, the only M$ software I will use are there operating systems. If I had any experience using another type of OS I would probably go down that path, but I don't, so I won't.
I'm having trouble getting the Windows Update program on my X1 to do anything, and yes, I am connected to my wireless network and can surf the net from the X1. Update just sits at the checking screen and does nothing.
Where do I go from here?
Cheers,
Graeme
yes, you need 3.5 of .net compact framework as stated in the app's thread
it can easily be found on the forum or via google/microsoft
you can either directly dl to your device or to your PC first b4 installing
Thanks Draken,
I managed to get the upgrade to 3.5 without a hitch. I already like this WinMo quite a deal. It makes me look like I know what I'm doing. LMAO .
I'm going to have another look at this "Advanced config" over the next couple of days and see what else it does.
As far as the loudspeaker is concerned, the volume of the ringtones, alarms and alerts are all loud enough on my phone. I have been reading and searching for days on this topic and these threads all seem to be referring to those items mentioned above and the radio which I don't use. All I'm interested in really is getting the speakerphone volume loud enough.
I have found thread leading to a cab file called "OTPXperiabeta02.cab" and might have a go at that.
What are your thoughts?
Thats enough for now.
Cheers and TIA,
Graeme.
gclough said:
Thanks Draken,
I managed to get the upgrade to 3.5 without a hitch. I already like this WinMo quite a deal. It makes me look like I know what I'm doing. LMAO .
I'm going to have another look at this "Advanced config" over the next couple of days and see what else it does.
As far as the loudspeaker is concerned, the volume of the ringtones, alarms and alerts are all loud enough on my phone. I have been reading and searching for days on this topic and these threads all seem to be referring to those items mentioned above and the radio which I don't use. All I'm interested in really is getting the speakerphone volume loud enough.
I have found thread leading to a cab file called "OTPXperiabeta02.cab" and might have a go at that.
What are your thoughts?
Thats enough for now.
Cheers and TIA,
Graeme.
Click to expand...
Click to collapse
advanced config is what the name says: advanced
you can do good, but you can also do bad when overdoing it, so start easily, don't change too much in one go (most changes requires soft reset to take effect)
in case you get problems you have it narrowed down immediately to latest change
regarding volume, there are many threads out there claiming (and enabling) full volume for this or that, as I'm content with all available volumes I didn't personally try any of them, so I can't comment
the cab you named is not known to me, so again I can't comment
enjoy the device
If you dont like Outlook it is a bit more difficult to edit your contacts using your desktop. A solution would be to export your contacts to an xlm file. Once again I have to mention SK Tools which is really worth the monney it costs. But as always with Windows Mobile there is almost certainly a freeware out there that does the same.
Im glad you managed to get advanced config running. I completely forgot to mention the .net cf 3.5 requirement.
Hi Draken & altae
I'm definitely aware of making changes on a PC and would be more so on this new device because I know so little about them .
Unfortunately, with a WinMo device, you don't have the option of using the "Custom" option while installing software that you do with new PC software.
The OTPXperiabeta02.cab appears to have done the trick at the moment but I haven't had the chance to test it fully yet. It has been suggesated to me that the problem lies in the fact that SE made the phone with poor quality speaker so that they could sell more or their BT devices. I'm not so sure about this but you never know what the marketing management of a major corporation like Sony might come up with.
I haven't installed the "Advanced Config" cab yet and will do so with the advised caution.
As I'm getting sensible answers, I'm keen to keep going on this thread with other questions and my further discoveries about this toy unless directed elsewhere. Anybody else who feels like being involved with this thread is more than welcome.
Cheers,
Graeme.
gclough said:
Hi Draken & altae
I'm definitely aware of making changes on a PC and would be more so on this new device because I know so little about them .
Unfortunately, with a WinMo device, you don't have the option of using the "Custom" option while installing software that you do with new PC software.
The OTPXperiabeta02.cab appears to have done the trick at the moment but I haven't had the chance to test it fully yet. It has been suggesated to me that the problem lies in the fact that SE made the phone with poor quality speaker so that they could sell more or their BT devices. I'm not so sure about this but you never know what the marketing management of a major corporation like Sony might come up with.
I haven't installed the "Advanced Config" cab yet and will do so with the advised caution.
As I'm getting sensible answers, I'm keen to keep going on this thread with other questions and my further discoveries about this toy unless directed elsewhere. Anybody else who feels like being involved with this thread is more than welcome.
Cheers,
Graeme.
Click to expand...
Click to collapse
No you dont have the same possibilities as on a deskop when it comes to installing a software. But many programs leave you at least the choice whether you want to install the software onto your storage card or if you'd like it to be installed in device memory.
Concerning your contacts editing problem: I don't know every software out there. I know that there are solutions to synch your phone with other programs than MS Outlook. Some of those solutions are freeware and others commercial. Look for relevant threads here at XDA or google it. I have always used Outlook and thus have not been in need to look for another program to synch my phone.
From what I read in the forums the OPTXperiabeta02.cab is the solution for your speaker phone problems because it (the cab) improves the volume of the speaker and therefore the speaker phone too. I can't judge how much this cab improves the volume because I have never used it (I consider the volume sufficient).
There is no reason to be afraid of advanced config. It's correct that you should be careful when you tweak your phone with this tool. If you change to many values at once you take the risk of running into troubles and not beeing able to narrow down the reason because you adapted so many values simultaneously. But you won't manage to destroy your phone with advaced config. The worst that can happen is that you need to perform a hard reset because you end up with a messed up operating system.