Kaiser SMS notification broken - Tilt, TyTN II, MDA Vario III General

I have just been playing around with duttys latest ROM and KaiserTweak and Schaps Advanced Config. I have now noticed that when I recieve an SMS the icon in the top task bar doesnt appear and there is no vibration/orange flashing light.
I have checked in Sounds and Notifications under settings and for new text message everything is ticked. Is there anyway to check these settings in the registry?
At first I thought this was a problem with duttys ROM so flashed back to my Stock Vodafone UK ROM. I then recustomised it (disabled threaded SMS and simple stuff like that) and it has now happened again.
Has this happened to anyone else?
Any suggestions at all would be welcome.

what are you using to disable threaded sms?
uninstall your method and install this cab file.
many people are still using the method that disables notifications.

I went into the registry and set SMSAvailable to 0
I really hope this is the solution so I dont need to send my poor phone off to vodafone to be mutilated.
Will give this method a try in the morning

SMSAvaliable disables sms notifications
so restore that key to default and install my cab and it'll work
(or atleast it 99.9% should)

sorry to bump but did this method work for you?

Related

All of a sudden no sms notifications.

ok, i have used search and skimmed through 14 pages of results and i don't know what has happened but i can't get any notifications for sms. i still get vibrations and rings from phone calls but i get nothing from sms. i have checked the settings, sounds and notifications, etc tab. i have downloaded and installed schaps advancedconfig and it didn't help. i haven't changed anything before this. i have a stock rom/radio. i haven't installed any new programs or changed any settings in forever and as of today i can't get a vibrate to save my life.
please help if you can.
thanks in advance
-Typhoone
I had a problem just like this, i believe. It was because i had set the SMS notification sound as an MP3, i think if it's set as something that's not a default tone. After a while i would get no sound for SMS notifications. i couldn't find anyone else with the problem, and the only fix I've found is to just set it back to a defualt tone. Then you should get the sound back, and vibrate too.
I am having the same problem. Haven't found a solution yet.
i wish that would help but i have never changed the notification sound. it is still set to the AT&T default. :'-(
typhoone said:
i wish that would help but i have never changed the notification sound. it is still set to the AT&T default. :'-(
Click to expand...
Click to collapse
i know you have said you havent changed settings however have you disabled threaded sms?
I like the original poster are running the stock rom which is not wm 6.1, so no threaded sms.
haven't disabled threaded, haven't changed the notification, haven't installed new proggies, havent changed any settings what-so-ever. i got my phone where i liked it around 2 months ago and i haven't changed anything since. and this started happenning yesterday. :'-(
your'e not alone
*bump*
How can this happen to only a handful of phones? There has to be more people with this problem.
check sounds and notifications and sounds tab and make sure BOTH of the first check boxes are checked. i disabled events once thinking it was just the bleep sound from windows and turns out it includes messageing but not phone rings. I was in the same situation for months stumped on this lol
still checked..... :'-( i want my notifications back. lol

Technical : SMS Managed Folder (Help Appreciated)

Hi fellow forumers, I'm new here. Pardon me if this isn't the right place to post technical question.
Just got my Diamond for a couple of days. I've a problem that some Diamond-ers might face, and I can't seem to find the solution anywhere else.
By going to Message/Menu/Tools/Manage Folder...
I'm suppose to be able to select that option and create a new folder to store my smses by default. But, apparently, the said option is being disable (greyed out) for some unknown reason.
Does any kind souls here have solutions to this? Do I need to do tweaking to enable this?
I think if I am not wrong, WM6.1 SMS is default Threaded Mode, that is you see all sms from same person in 1 view. In threaded mode, you cannot create sub-folder.
Search in this forum, there is an apps which able to switch your sms between threaded and normal (not threaded and single sms like WM5 and WM6). This apps need .netcf v3.5. I think in normal mode, you can create sub-folder. After that you can switch it back to threaded mode.
Try and let us know.
Solution
Thanks CWKJ for your solution. As what you stated, the "manage folder..." option will not be available if it is in threaded sms mode.
I tweaked the registery to make it in normal sms mode and it is enabled.
Here is how it is done:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Setting Value to 0 will give you normal SMS inbox
Setting Value to 1 will give you threaded SMS inbox
Viola. The option is enabled. Hope this help new Diamond users as well.
Cheerios!
Janch said:
Thanks CWKJ for your solution. As what you stated, the "manage folder..." option will not be available if it is in threaded sms mode.
I tweaked the registery to make it in normal sms mode and it is enabled.
Here is how it is done:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Setting Value to 0 will give you normal SMS inbox
Setting Value to 1 will give you threaded SMS inbox
Viola. The option is enabled. Hope this help new Diamond users as well.
Cheerios!
Click to expand...
Click to collapse
With those settings you will stop the notification too. Use search for more advanced regsettings (I know they were posted in the Prophet WM6 section) or use ModeSMS.
You using Registry tweak.
Use the Apps as I have suggested. Search harder. Its somewhere in the forum.
I tried ModeSms, but the programme didn't work somehow as the programme screen was totally distorted.
I tried this method instead and it worked with notifications and disable threaded inbox.
HKCU\Software\Microsoft\Inbox\Settings\OEM\SMSInbox
ThreadingDisabled Value=0 (threaded) or 1 (single)
with reference to:
http://forum.xda-developers.com/showpost.php?p=2086458&postcount=1
Hope this helped other users as well =)
Strange, I make a search from here, cannot find, but search via Google can direct me to here.
Search for "SMS Tweaker V1.5" you will find the working version.
Thanx for Help
Janch said:
Thanks CWKJ for your solution. As what you stated, the "manage folder..." option will not be available if it is in threaded sms mode.
I tweaked the registery to make it in normal sms mode and it is enabled.
Here is how it is done:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Setting Value to 0 will give you normal SMS inbox
Setting Value to 1 will give you threaded SMS inbox
Viola. The option is enabled. Hope this help new Diamond users as well.
Cheerios!
Click to expand...
Click to collapse
can u please tell me how can i access [HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
to change it, i mean how to find registry...

sms alert problem

hello friends.
i have question, plz help!
when i recieve new sms massage my phone take no action, i mean ther is no alert ring on new sms!
i check the notification settings and all of them is ok. even i check the event notification but no alert again. i even hard reset my device and this problem remains. i rom is the latest version and i apply the wake up screen on new sms tweak on my phone. i undo this tweak but steel the same (no alert).
now on new massages the phones screen turned on and new massage counter show over massages tab icon in touchflo3D, but no alert!!!!
what should i do to my phone except installing the 3rd party apps?
helllllp plzzzz
oh , and sorry for my poor english help plz (
Try...
Apply the tweak.. and then restart your phone. (not hard reset just switch it off and then on again).
Might work, might not work.. but while you are waiting for others to come up with a solution, why not give the tweak another shot.
All the best
thanks for replay.
which tweak u mean?
Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
Also when you disable threaded sms; notification breaks!
See thread: WM 6.1 how to disable threaded sms without disabling sms notifications?
Untitled79 said:
Also when you disable threaded sms; notification breaks!
See thread: WM 6.1 how to disable threaded sms without disabling sms notifications?
Click to expand...
Click to collapse
Don't use the tweak put up in the thread you quoted. Set that value to the default value.
There is another way to disable threaded messages
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM
Create Registry entry
SMSInboxThreadingDisabled
Set Value to 1
Restart the phone
This way.. the Wake on Sms Tweak does it's job
implying..
unthreaded texts.. and notification on Sms
i make the changes in registry and the threaded mode is disabled but still have the problem.
i wonder why my device has a such a problem ?!!
no one have new idea?
that's not fair heeeellppp plzzzz (
go to settings / sound and alerts and flag sound allert on "new sms". Worked for me.
Carmad666 said:
go to settings / sound and alerts and flag sound allert on "new sms". Worked for me.
Click to expand...
Click to collapse
thanks for replay but i try that before.
i don't know what should i do with this silly problem
i had the same problem but it was becouse of registry edit. I wanted to turn off threaded sms (chat) in registry and thats why i had no sound for new message. Maybe its also a solution for you.
P.S
mayby one of programs u have installed disabled chat function. check in registry this: HKEY_CURRENT_USER/software/microsoft/inbox/
mark SETTINGS (but dont enter) and there you have value SMSAvailable. must be set 1. then restart
Good luck
Messages go with SYSTEM VOLUME, and no with RING VOLUME
nimamalek said:
hello friends.
i have question, plz help!
when i recieve new sms massage my phone take no action, i mean ther is no alert ring on new sms!
i check the notification settings and all of them is ok. even i check the event notification but no alert again. i even hard reset my device and this problem remains. i rom is the latest version and i apply the wake up screen on new sms tweak on my phone. i undo this tweak but steel the same (no alert).
now on new massages the phones screen turned on and new massage counter show over massages tab icon in touchflo3D, but no alert!!!!
what should i do to my phone except installing the 3rd party apps?
helllllp plzzzz
oh , and sorry for my poor english help plz (
Click to expand...
Click to collapse
I have the same problem before
Firstly, you can try the following registry to disable the threaded sms:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM\SMSInboxThreadingDisabled
DWORD value set to 1
Then, set the following registry and restart your phone, now the sms alert/sound/vibrate are also existed.
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s]
"SMSAvailable"=dword:1
I fixed the SMS alert problem on my Touch Diamond
Hi,
I managed to fix it on my touch diamond
I installed SPB phone suite from here
http://www.spbsoftwarehouse.com/products/phonesuite/ and did the soft reset when requested.
The problem disappeared after that.
I then un-installed it and the sms alert still works properly.
~ep~

SMS/Mail confirmation alert

Just got a new diamond here in Tokyo connected the Softbank network.
It seems whenever I send out an email via Outlook/SMS/S! Mail(Service that allows SMS-like mail to be sent to regular email accounts or other cellphone providers...most people use it here in Japan) I get a "Your mail has been successfully sent" email confirmation everytime I send out a mail. For someone who uses all three services frequently, it tends to get a little annoying
I've downloaded many tweaks and modification applications for the diamond but it seems I'm still not able to find the workaround...
Does anyone know the cure for this or is this a known problem?
Lavish P said:
Just got a new diamond here in Tokyo connected the Softbank network.
It seems whenever I send out an email via Outlook/SMS/S! Mail(Service that allows SMS-like mail to be sent to regular email accounts or other cellphone providers...most people use it here in Japan) I get a "Your mail has been successfully sent" email confirmation everytime I send out a mail. For someone who uses all three services frequently, it tends to get a little annoying
I've downloaded many tweaks and modification applications for the diamond but it seems I'm still not able to find the workaround...
Does anyone know the cure for this or is this a known problem?
Click to expand...
Click to collapse
This little quirk bothers me too because I want to hit send and then lock the device; unfortunately, when I hit send and lock the device I get a bunch of notifications and the device unlocks itself and random uttones get pressed as its in my pocket.
It may be best to load a WWE rom and sort out the smail using mmslite. Getting JP input working however is another issue.
For the problem with the notifications in softbank's arcsoft mail app, I wonder if there is a registry fix we can do.
solution for successful sent notification(at least for text)
http://www.freewarepocketpc.net/ppc-download-diamondpro-tweak.html
Go to messages, and disable text messages notifications.
Kevbodian, mjz147,
Thanks, I really appriciate your quick response!!
I checked out that Diamond tweak app and its one hell of an applicaiton!
It seems though, when I disabled the text message notification and soft reset, im still getting those alerts after sending MMS/SMS emails.
Is there something wrong with my device or I may have to do some manual modifications via registry? :\
Tried to just disable em in Windows?
Start/Messaging/Menu/Tools/Options/SMS MMS
There you can disable notifications. Atleast for SMS messages for me it works.
kosherpig said:
Tried to just disable em in Windows?
Start/Messaging/Menu/Tools/Options/SMS MMS
There you can disable notifications. Atleast for SMS messages for me it works.
Click to expand...
Click to collapse
I guess I have bad luck when it comes to disabling notification via Windows.
Unlike the US version, my phone doesnt have just one central location for mail but two (Outlook application - used for PC email & SoftBank Mail - used for SMS and MMS...)
So when I looked under the option menu in Outlook tools, I wasnt able to find any SMS/MMS options...
Im sure theres a registry hack that can be used...im not so sure why the diamond tweak app could apply changes to everything except the "turn off notifications" option though...
Was anyone able to solve this issue?
Did you guys try Advanced Config v3.3?
It has a section devoted to messages tweaks.
It does have a tweak that disables notifications.
Greets.
Sergio PC said:
Did you guys try Advanced Config v3.3?
It has a section devoted to messages tweaks.
It does have a tweak that disables notifications.
Greets.
Click to expand...
Click to collapse
I currently have 3.3 installed and have used it to disable/enable many features on my Diamond. But it seems after I disable the 'SMS delivery notification' and 'SMS sent notification" fields (and soft reboot), it is still showing the sent notifications after sms/s!mail is sent...
As Kevbodian was saying, maybe there is a special reg hack that needs to be done under softbank's arcsoft mail app.
could somebody figure out what change is made when that notification is turned off and turn this into a cab file? the only thing that bothers me is the sound. i dont mind the bubble or the little icon on the top telling me that my sms is sent. thanks
this one is simple and right to the point install it and it doesnt give you the message, you dont have tons of menus to navigate through just that install
also i am simply reposting this app i did not develop it or design it credit goes where credit is due
so this turns off the sound AND the notifications also? thanks
yep no sound and no pop up message after sending one
i hope it helps
almost tempted to figure out how cab files work (arent they just reg edits?) and maybe try to see if i can change it myself. i like having the notifications (bubble and little icon on the top) but the sound can be annoying at times,
Edit1: also i just installed advanced config 3.3 and the notification thing works for me.
Edit2: also search "kraiser tweak" and you will find it has settings for this. a lot of settings actually for just the thing you are talking about. now we just need to find the edits in the registry because i dont really like having 2 configuration programs on my phone. (advance config, and kraiser tweak)
Edit3: ok i found this on the wiki....Disable SMS Sent Notification
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings] Set SMSNoSentMsg to 1
.....so does this mean if it was changed to a 2,3,or 4 that would change the action of it? im really trying to look into this.....if you cant tell haha

Text message resend..? Help?

Is there any cab file out there for the AT&T tilt that would allow a message that can't be sent, due to no service, or receiving another text at the same time, ect... Is there any cab that would allow me a message resend button as opposed to having to open the drafts, open the text, send the text, open back up the inbox...?
If this doesn't exist, can anyone capable of writing code create me this hack? It would be highly appreciated.
Thanks in advanced!
windows mobile 6.1 + "threaded" text messaging
if you are using a WinMo 6.1 ROM, threaded text messaging is enabled by default (if not enabled, use KaiserTweak to enable threaded messaging).
i clearly remember (because it has happened with me TWICE) that the threaded messaging view will display any unsent messages (within the thread) in RED color and will provide a clickable link labeled "Try again"...the function of the link is self explanatory
the combination of events you are talking about (sending a message exactly when receiving a message and/or a phone call) is RARE but it DOES happen...fortunately, i don't mind using the threaded messaging view and i get the resend link (in case of transmission failure for whatever reason) as a bonus
hope this helps...good luck!
It's not necessiarily rare to me as I text all the time, haha. I know what you're talking about, but I don't like threaded text messaging. It becomes slow and sluggish after a while. I highly appreciate the suggestion though!
Does anybody know of a program that would allow this tweak?
Quite some time since I used Arcsoft but didnt they have a resend feature (could be some of the later ed.)? Or am I wrong and it was a feature on 6.1? If it was on 6.1 you could still use it for just that by switching off treaded view.
I do have arcsoft MMS, but how would i go about using it to turn off threaded view SMS and keep the "try again" or resend button?
yeahmanitsme said:
I do have arcsoft MMS, but how would i go about using it to turn off threaded view SMS and keep the "try again" or resend button?
Click to expand...
Click to collapse
Ok hold on, will make a cab for you.
Enjoy !
Raiisak`s En/Disable Treaded SMS
Thanks a ton for making that, but I have kaiser tweak and I am able to en/disable threaded SMS. Thanks tho.
Is there a cab that you could make me to add a popup window to my screen when a message is unable to send that simple let's me resend it instead of automatically move it to the drafts? This seems to happen alot seeing as I text alot. Thanks in advanced for anybody can help!
yeahmanitsme said:
Thanks a ton for making that, but I have kaiser tweak and I am able to en/disable threaded SMS. Thanks tho.
Is there a cab that you could make me to add a popup window to my screen when a message is unable to send that simple let's me resend it instead of automatically move it to the drafts? This seems to happen alot seeing as I text alot. Thanks in advanced for anybody can help!
Click to expand...
Click to collapse
Reason I made the cab was to simply add on/off the treaded sms whitout making any change to the notification status for you by simply create this DWORD in youre reg:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:00000000
Click to expand...
Click to collapse
Arcsoft_MMS 5_0_31_81 w/ treaded ON had the function to ask if you wanted to resend sms/mms if failed. Try to install that and run my cab and see if the red text comes up comes if the sms fails to send. Chance are that this will solve much of youre problem, other than that I would recomend to try another radio if you have severe signal issues
Sorry for the stupid question but um when you say new radio... You mean....?
If you use custom rom they come whit variouse radio, not always will the given radio work smoothly in youre country and phone. I would read up on this tread: http://forum.xda-developers.com/showthread.php?t=393182 and also the OP of the used rom to see if there is any recomended radio for youre phone or country. If none found I would ask in that tread. GL
Is there any way to auto resend a failed message? either for a certain time or an X amount of resends?. My phone constantly goes in and out of service. I dont want to have to keep my phone in my hand waiting for service to kick in then resend.

Categories

Resources