Technical : SMS Managed Folder (Help Appreciated) - Touch Diamond, MDA Compact IV General

Hi fellow forumers, I'm new here. Pardon me if this isn't the right place to post technical question.
Just got my Diamond for a couple of days. I've a problem that some Diamond-ers might face, and I can't seem to find the solution anywhere else.
By going to Message/Menu/Tools/Manage Folder...
I'm suppose to be able to select that option and create a new folder to store my smses by default. But, apparently, the said option is being disable (greyed out) for some unknown reason.
Does any kind souls here have solutions to this? Do I need to do tweaking to enable this?

I think if I am not wrong, WM6.1 SMS is default Threaded Mode, that is you see all sms from same person in 1 view. In threaded mode, you cannot create sub-folder.
Search in this forum, there is an apps which able to switch your sms between threaded and normal (not threaded and single sms like WM5 and WM6). This apps need .netcf v3.5. I think in normal mode, you can create sub-folder. After that you can switch it back to threaded mode.
Try and let us know.

Solution
Thanks CWKJ for your solution. As what you stated, the "manage folder..." option will not be available if it is in threaded sms mode.
I tweaked the registery to make it in normal sms mode and it is enabled.
Here is how it is done:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Setting Value to 0 will give you normal SMS inbox
Setting Value to 1 will give you threaded SMS inbox
Viola. The option is enabled. Hope this help new Diamond users as well.
Cheerios!

Janch said:
Thanks CWKJ for your solution. As what you stated, the "manage folder..." option will not be available if it is in threaded sms mode.
I tweaked the registery to make it in normal sms mode and it is enabled.
Here is how it is done:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Setting Value to 0 will give you normal SMS inbox
Setting Value to 1 will give you threaded SMS inbox
Viola. The option is enabled. Hope this help new Diamond users as well.
Cheerios!
Click to expand...
Click to collapse
With those settings you will stop the notification too. Use search for more advanced regsettings (I know they were posted in the Prophet WM6 section) or use ModeSMS.

You using Registry tweak.
Use the Apps as I have suggested. Search harder. Its somewhere in the forum.

I tried ModeSms, but the programme didn't work somehow as the programme screen was totally distorted.
I tried this method instead and it worked with notifications and disable threaded inbox.
HKCU\Software\Microsoft\Inbox\Settings\OEM\SMSInbox
ThreadingDisabled Value=0 (threaded) or 1 (single)
with reference to:
http://forum.xda-developers.com/showpost.php?p=2086458&postcount=1
Hope this helped other users as well =)

Strange, I make a search from here, cannot find, but search via Google can direct me to here.
Search for "SMS Tweaker V1.5" you will find the working version.

Thanx for Help
Janch said:
Thanks CWKJ for your solution. As what you stated, the "manage folder..." option will not be available if it is in threaded sms mode.
I tweaked the registery to make it in normal sms mode and it is enabled.
Here is how it is done:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Setting Value to 0 will give you normal SMS inbox
Setting Value to 1 will give you threaded SMS inbox
Viola. The option is enabled. Hope this help new Diamond users as well.
Cheerios!
Click to expand...
Click to collapse
can u please tell me how can i access [HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
to change it, i mean how to find registry...

Related

Kaiser SMS notification broken

I have just been playing around with duttys latest ROM and KaiserTweak and Schaps Advanced Config. I have now noticed that when I recieve an SMS the icon in the top task bar doesnt appear and there is no vibration/orange flashing light.
I have checked in Sounds and Notifications under settings and for new text message everything is ticked. Is there anyway to check these settings in the registry?
At first I thought this was a problem with duttys ROM so flashed back to my Stock Vodafone UK ROM. I then recustomised it (disabled threaded SMS and simple stuff like that) and it has now happened again.
Has this happened to anyone else?
Any suggestions at all would be welcome.
what are you using to disable threaded sms?
uninstall your method and install this cab file.
many people are still using the method that disables notifications.
I went into the registry and set SMSAvailable to 0
I really hope this is the solution so I dont need to send my poor phone off to vodafone to be mutilated.
Will give this method a try in the morning
SMSAvaliable disables sms notifications
so restore that key to default and install my cab and it'll work
(or atleast it 99.9% should)
sorry to bump but did this method work for you?

sms alert problem

hello friends.
i have question, plz help!
when i recieve new sms massage my phone take no action, i mean ther is no alert ring on new sms!
i check the notification settings and all of them is ok. even i check the event notification but no alert again. i even hard reset my device and this problem remains. i rom is the latest version and i apply the wake up screen on new sms tweak on my phone. i undo this tweak but steel the same (no alert).
now on new massages the phones screen turned on and new massage counter show over massages tab icon in touchflo3D, but no alert!!!!
what should i do to my phone except installing the 3rd party apps?
helllllp plzzzz
oh , and sorry for my poor english help plz (
Try...
Apply the tweak.. and then restart your phone. (not hard reset just switch it off and then on again).
Might work, might not work.. but while you are waiting for others to come up with a solution, why not give the tweak another shot.
All the best
thanks for replay.
which tweak u mean?
Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
Also when you disable threaded sms; notification breaks!
See thread: WM 6.1 how to disable threaded sms without disabling sms notifications?
Untitled79 said:
Also when you disable threaded sms; notification breaks!
See thread: WM 6.1 how to disable threaded sms without disabling sms notifications?
Click to expand...
Click to collapse
Don't use the tweak put up in the thread you quoted. Set that value to the default value.
There is another way to disable threaded messages
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM
Create Registry entry
SMSInboxThreadingDisabled
Set Value to 1
Restart the phone
This way.. the Wake on Sms Tweak does it's job
implying..
unthreaded texts.. and notification on Sms
i make the changes in registry and the threaded mode is disabled but still have the problem.
i wonder why my device has a such a problem ?!!
no one have new idea?
that's not fair heeeellppp plzzzz (
go to settings / sound and alerts and flag sound allert on "new sms". Worked for me.
Carmad666 said:
go to settings / sound and alerts and flag sound allert on "new sms". Worked for me.
Click to expand...
Click to collapse
thanks for replay but i try that before.
i don't know what should i do with this silly problem
i had the same problem but it was becouse of registry edit. I wanted to turn off threaded sms (chat) in registry and thats why i had no sound for new message. Maybe its also a solution for you.
P.S
mayby one of programs u have installed disabled chat function. check in registry this: HKEY_CURRENT_USER/software/microsoft/inbox/
mark SETTINGS (but dont enter) and there you have value SMSAvailable. must be set 1. then restart
Good luck
Messages go with SYSTEM VOLUME, and no with RING VOLUME
nimamalek said:
hello friends.
i have question, plz help!
when i recieve new sms massage my phone take no action, i mean ther is no alert ring on new sms!
i check the notification settings and all of them is ok. even i check the event notification but no alert again. i even hard reset my device and this problem remains. i rom is the latest version and i apply the wake up screen on new sms tweak on my phone. i undo this tweak but steel the same (no alert).
now on new massages the phones screen turned on and new massage counter show over massages tab icon in touchflo3D, but no alert!!!!
what should i do to my phone except installing the 3rd party apps?
helllllp plzzzz
oh , and sorry for my poor english help plz (
Click to expand...
Click to collapse
I have the same problem before
Firstly, you can try the following registry to disable the threaded sms:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM\SMSInboxThreadingDisabled
DWORD value set to 1
Then, set the following registry and restart your phone, now the sms alert/sound/vibrate are also existed.
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s]
"SMSAvailable"=dword:1
I fixed the SMS alert problem on my Touch Diamond
Hi,
I managed to fix it on my touch diamond
I installed SPB phone suite from here
http://www.spbsoftwarehouse.com/products/phonesuite/ and did the soft reset when requested.
The problem disappeared after that.
I then un-installed it and the sms alert still works properly.
~ep~

Outgoing SMS saved in inbox

Hi,
I just discovered that all my outgoing SMS messages are stored in my inbox. and send items. This is a bit annoying. Did anyone find a solution to avoid this.
I should just be stored as send items.
Thanx in advance
Robert
Do your sent messages arrive to the destination number?
If not, I'd suggest to check your settings. Cause in that case there's a reason that they don't appear in sent items.
i believe that it is the threading feature of wm6.1. if you install advanced config and the diamond config file, you can turn it off.
Yes, the messages do arrive. I will try to turn the threading off. Thanx!
Try Diamontweak
Hi, I had the same problem and after installing Diamontweak that allows you to easily deactivate sms threading everything w
Try Diamontweak
Hi,
I had the same problem and after installing Diamontweak that allows you to easily deactivate sms or text threading everything was OK. This small program also allows you to tweak your Diamond with many other features.
Here's the link: http://forum.xda-developers.com/showthread.php?t=409540
Cheers and have a good day!

disable conversation mode in sms

good day , if anyone know how to disable the conversation mode in sms function , please let me know . thanks .............
Search,
the Advanced Config program can do it, some of the Cooked Rom's have a threaded Messaging icon in control panel / settings
Install this program :
SMS Chat enabler_v3.cab
There's a registry hack that'll do this and it definitely works as that's what I used on my Diamond but you'll need to search for it.
here you go look at post 2 here http://forum.xda-developers.com/showthread.php?t=398265
where to download the smschatenable.cab ?
Sms Chat Enable
chee1402 said:
where to download the smschatenable.cab ?
Click to expand...
Click to collapse
i did a search and came up with this http://forum.xda-developers.com/showthread.php?t=385127

Text message resend..? Help?

Is there any cab file out there for the AT&T tilt that would allow a message that can't be sent, due to no service, or receiving another text at the same time, ect... Is there any cab that would allow me a message resend button as opposed to having to open the drafts, open the text, send the text, open back up the inbox...?
If this doesn't exist, can anyone capable of writing code create me this hack? It would be highly appreciated.
Thanks in advanced!
windows mobile 6.1 + "threaded" text messaging
if you are using a WinMo 6.1 ROM, threaded text messaging is enabled by default (if not enabled, use KaiserTweak to enable threaded messaging).
i clearly remember (because it has happened with me TWICE) that the threaded messaging view will display any unsent messages (within the thread) in RED color and will provide a clickable link labeled "Try again"...the function of the link is self explanatory
the combination of events you are talking about (sending a message exactly when receiving a message and/or a phone call) is RARE but it DOES happen...fortunately, i don't mind using the threaded messaging view and i get the resend link (in case of transmission failure for whatever reason) as a bonus
hope this helps...good luck!
It's not necessiarily rare to me as I text all the time, haha. I know what you're talking about, but I don't like threaded text messaging. It becomes slow and sluggish after a while. I highly appreciate the suggestion though!
Does anybody know of a program that would allow this tweak?
Quite some time since I used Arcsoft but didnt they have a resend feature (could be some of the later ed.)? Or am I wrong and it was a feature on 6.1? If it was on 6.1 you could still use it for just that by switching off treaded view.
I do have arcsoft MMS, but how would i go about using it to turn off threaded view SMS and keep the "try again" or resend button?
yeahmanitsme said:
I do have arcsoft MMS, but how would i go about using it to turn off threaded view SMS and keep the "try again" or resend button?
Click to expand...
Click to collapse
Ok hold on, will make a cab for you.
Enjoy !
Raiisak`s En/Disable Treaded SMS
Thanks a ton for making that, but I have kaiser tweak and I am able to en/disable threaded SMS. Thanks tho.
Is there a cab that you could make me to add a popup window to my screen when a message is unable to send that simple let's me resend it instead of automatically move it to the drafts? This seems to happen alot seeing as I text alot. Thanks in advanced for anybody can help!
yeahmanitsme said:
Thanks a ton for making that, but I have kaiser tweak and I am able to en/disable threaded SMS. Thanks tho.
Is there a cab that you could make me to add a popup window to my screen when a message is unable to send that simple let's me resend it instead of automatically move it to the drafts? This seems to happen alot seeing as I text alot. Thanks in advanced for anybody can help!
Click to expand...
Click to collapse
Reason I made the cab was to simply add on/off the treaded sms whitout making any change to the notification status for you by simply create this DWORD in youre reg:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:00000000
Click to expand...
Click to collapse
Arcsoft_MMS 5_0_31_81 w/ treaded ON had the function to ask if you wanted to resend sms/mms if failed. Try to install that and run my cab and see if the red text comes up comes if the sms fails to send. Chance are that this will solve much of youre problem, other than that I would recomend to try another radio if you have severe signal issues
Sorry for the stupid question but um when you say new radio... You mean....?
If you use custom rom they come whit variouse radio, not always will the given radio work smoothly in youre country and phone. I would read up on this tread: http://forum.xda-developers.com/showthread.php?t=393182 and also the OP of the used rom to see if there is any recomended radio for youre phone or country. If none found I would ask in that tread. GL
Is there any way to auto resend a failed message? either for a certain time or an X amount of resends?. My phone constantly goes in and out of service. I dont want to have to keep my phone in my hand waiting for service to kick in then resend.

Categories

Resources