SOLVED!!! - HTC WM6.1 ROM : Missing "Fn Space" function? - Tilt, TyTN II, MDA Vario III General

Hi folks
I've just upgraded to the new HTC WM6.1 ROM update and, to my horror, found out that I'm unable to type 'ó','á','ð', etc. using the Fn Space combination.
I've tried to apply the 'Tilt keyboard fix' and 'TyTN II keyboard fix' aswell as going through the forums digging for a solution, but to no avail
Does anyone know a solution for this?
Thanks in advance!

in my signature under scandanavian keyboard fix

Thanks for your pointer!
I tried installing both the "Scandinavian keyboard.cab" and "Nordic Keypad Mapping.cab" but all I get is a " " (space) when I do the Fn Space combination
I'm not sure how to install the "XDA_JCEspi2005_Sweden_Input_Kaiser.zip" file. I tried to rename the .zip to .cab but the installation was unsuccessfull

sorry never noticed, but yea must have been a bad download. I will try to see if i can get it again

surely you would get more help posting this in the ROM section of the forum

khals said:
Thanks for your pointer!
I tried installing both the "Scandinavian keyboard.cab" and "Nordic Keypad Mapping.cab" but all I get is a " " (space) when I do the Fn Space combination
I'm not sure how to install the "XDA_JCEspi2005_Sweden_Input_Kaiser.zip" file. I tried to rename the .zip to .cab but the installation was unsuccessfull
Click to expand...
Click to collapse
Did you remember to soft reset after executing fix cab?

Sorry if I'm posting in the wrong section, I just figured as this was a official update from HTC that it would become standard within time
I've tried to soft reset between installing the cabs, but that didn't help

SOLVED!!!
I finally found a solution for this!
I'm not quite sure if all these steps are necesary as I'm not going to be retrying this fix as it finally works after days of pulling hairs. Here's what I did:
1. I installed gullum diamond keys and gullum Dansk Diamond keys. Did a reboot, disabled everything in "XT9 Settings...", did a reboot.
2. I changed the HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/KEYBD/CWSLayout registry value from '1' to '0'. Rebooted.
3. I downloaded duttythroy Disable xt9 and rebooted.
As a side result this also fixed the following issue HTC WM6.1 ROM : Add Recipient to SMS..
Hope this helps anyone stuck with the same problem

I guess the "disable XT9" is the only part needed in case you are anly misssing accents. I changed the registry manually (two keys), soft reset and it worked
Originally Posted by Bardia Garsha
Originally Posted by ProphetUser07
As far as I've been able to find out, this is caused by XT9 being enabled. I've disabled XT9 on my prophet which has successfully re-enabled word completion and also autocomplete when entering names in the To: field on messages. I've done this by changing the following registry entries and powering the device off and back on:
With XT9 Enabled I Had:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\eT9Ime.dll"
"Layout Text"="eT9 IME"
With XT9 Disabled I Now Have:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\compime.dll"
"Layout Text"="COMP IME"
*The last 3 digits of the registry key (ie 409) may vary depending on the language code used.

didn't work for me
I have been looking in the forum for a solution for the Tilt keyboard. Everytime I ask, someone usually responds pointing me to the Tilt Keyboard Fix cab, that was posted by Taurus Bulba.
However, installing that fix, results in the keyboard being mapped with the ATT layout, by enabling the CWS layout in the registry. This makes every key work as it should, but it kills the Fn+Space combination.
The Fn-Space key combination, typed after a character, changes it to others, as per what is defined in sym049.txt (or whatever symxxx.txt file you have in the windows directory).
For example, if you type an "a", press Fn+Space, you get an á, then à,â, etc. Same with all other characters. This, as you can imagine, is important for those that type in languages other than English, that require accents. And for those that want to use characters not in the keyboard often (like the Euro sign "€" or the british pound sign, "£", the ç, etc.).
I think the issue is with the CWS layout (CWS being Cingular/ATT). That layout doesn't have the Fn+Space in it. The Hermes keyboard had a blue "á" and "ü" written on the top left corner of the Space bar. The Tilt doesn't have those. In fact, if you install the original ATT Rom (no need for keyboard fix there), the Fn+Space combination doesn't work.
The only way I've seen to get Fn-Space back to life is NOT to use the CWS layout that comes from the ATT Keyboard Fix. Using any non ATT Rom will allow you to get Fn-Space, but at the cost of getting many of the other Fn keys mapped wrong. For example, the ! and the @ are swapped, the ; gives you a %, and so on.
Sounds like there should be a new keyboard layout that is 99% like the one resulting from the keybord fix (CWS layout) but that adds the Fn-Space combination to it.
Any suggestions?

santiargy said:
I changed the registry as you suggested and still stuck.
FN+Space wouldn't work!!!
Click to expand...
Click to collapse
Did you try my solution in post #8 ?

Missing Fn Space - not solved?!!
Unfortunately, the proposed solution didn't work. I think the issue is with CWS layout (CWS being Cingular/ATT). That layout doesn't have the Fn+Space in it. For example, the Hermes keyboard had a blue á ú written on the Space bar. The tilt doesn't have that. In fact, if you install the original ATT Rom, the Fn+Space combination doesn't work.
The only way I've seen to get Fn-Space back to life is not to use the layout that results from the ATT Keyboard Fix (which enables CWS layout in the Registry). However, if you use the English layouts from non ATT Roms you get Fn-Space at the cost of getting many of the other Fn keys mapped the wrong way... For example, the ! and the @ are swapped, the ; gives you a %, and so on.

Didn't work for me either.
Tried both ways. By manually and with that .cab. Both resulting same problem.
I can use those accented characters, but now I can type only numbers with diamond keyboards. :-o If I change registry back to the original. I can write and everything else works, but those accented in harware keyboard.

Worked for me
I guess the "disable XT9" is the only part needed in case you are anly misssing accents. I changed the registry manually (two keys), soft reset and it worked
Originally Posted by Bardia Garsha
Originally Posted by ProphetUser07
As far as I've been able to find out, this is caused by XT9 being enabled. I've disabled XT9 on my prophet which has successfully re-enabled word completion and also autocomplete when entering names in the To: field on messages. I've done this by changing the following registry entries and powering the device off and back on:
With XT9 Enabled I Had:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\eT9Ime.dll"
"Layout Text"="eT9 IME"
With XT9 Disabled I Now Have:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\compime.dll"
"Layout Text"="COMP IME"
This one worked for me thanks.

santiargy said:
Unfortunately, the proposed solution didn't work. (...) .However, if you use the English layouts from non ATT Roms you get Fn-Space at the cost of getting many of the other Fn keys mapped the wrong way... For example, the ! and the @ are swapped, the ; gives you a %, and so on.
Click to expand...
Click to collapse
Im with you in this problem.... if i press ! i got @ ... etc...

possible more data found, no solution
according to
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Keyboard
my HTC TyTN II thinks it has the German keyboard, not the English one...
Anybody know how to fix this? everywhere i look i have it set to English (US)
Jeremie

u didnt search enough
use kaisertweak or advanced config, and change the kb layout

I may've found another part of my mystery... I was using the stock HTC ROM downloaded from their site set to United States. When the site is set to Europe, the correct one is downloaded.
Jeremie

Final and simple solution
Dear all,
I fiddled around with my old TYTN (Hermes) and none of the solutions found in the net really helped. While it was quite easy to fix the QWERTZ / QWERTY problem on the hardware keyboard (letters Y and Z inverted) the Fn+Space problem was a bit harder to solve. None of the various cab files or other hints really seemed to help.
So here is what I did to finally fix this:
1. copied a sym.0407.txt into the Windows directory using ActiveSync
2. applied the following registry settings:
REGEDIT4
[HKEY_CURRENT_USER\keyboard layout]
[HKEY_CURRENT_USER\keyboard layout\toggle]
"Hotkey"="1"
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010407"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010407"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010407]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="compime.dll"
"Layout Text"="COMP IME"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Keyboard Layout]
"Active"="e0010407"
[HKEY_LOCAL_MACHINE\Software\OEM\Qwerty]
"Layout"=dword:00020407
With these settings I have Y and Z assigned correctly and the Fn+Space working as well. I guess this will not only work on the TYTN (Hermes) but also on the TYTN II (Kaiser).
Kind regards,
DAC324
Attached are the two files needed (sym.0407.txt and the registry settings file). If somebody could explain me how to make a CAB for them, I will gladly do that, too.

Related

PDAVIET keyboard

whenever i use the slide out keyboard with the new pdaviet rom the alt characters are not positioned correctly with the letters on the keyboard for instance i try to press alt P to get the "?" mark but i get ")" is there maybe a registry out there that lets me change the alt characters output for my keyboard i am using a t-mobile wing if that is of importance
forumsearch?!
kinhdole said:
[...]
i try to press alt P to get the "?" mark but i get ")" is there maybe a registry out there that lets me change the alt characters output for my keyboard i am using
Click to expand...
Click to collapse
Already discussed that numberous times, please use the forum search. Its in the KCU/Keyboard Layout Reg.Key
sorry about that i wasnt sure what to put in the search bar but thanks for the help
link please
i actually couldnt find any information about registry editing for the keyboard using the keywords you gave me it pointed to files that help me chang ethe language of the keyboard but that is not what i want to do if possible could u put donw a linki would appreciate the help
HKCU/Keyboard Layout Reg.Key is the location of the registry key.
Monarch73 said:
Already discussed that numberous times, please use the forum search. Its in the KCU/Keyboard Layout Reg.Key
Click to expand...
Click to collapse
Did a search, nothing in any of the guides works.
Adding a Locale string did nothing, there's nothing indicating anything to do with locales in that string you pointed out, nothing I could find that seems to work.
Seeing as how it's been covered so many times, it should be easy for you to pull up a link for my ignorant self that I can't seem to find on how to change the US layout to the Wing layout.
I have posted it a bunch of times I know what your saying. We are all waiting for a solution to this problem on the wing.
peraltah said:
I have posted it a bunch of times I know what your saying. We are all waiting for a solution to this problem on the wing.
Click to expand...
Click to collapse
It's odd. The version xxx.09 of PDAVIET's rom worked peachy with the Wing layout for me. This xxx.10 version is being goofy, though.
Really? your the 1st one to mention it. I will check it out later on.
Whoops, I meant the xxx.08 version worked perfectly. I skipped the xxx.09 version.
yeah it started messing up wen i started using pdaviet 0.9 and 10 0,8 was fine for me
Hey guys, just found this post now and it works, my keyboard is back to normal again, all characters working as they should !! …but now I have to relearn the damn keyboard layout…
Thanks to Corkey
Originally Posted by corky
Well i just cured my autocomplete problem thanks to dromico.
I first done all these 3 steps below for uk layout, but then lost the autocomplete function, so i put steps 2 and 3 back to 0409, and just set step 1 to 0809 and it works fine now
1. HKCU >> ControlPanel >> Keybd
create string named Locale and enter this code 0809
2. HKCU >> keyboard layout >> Preload >> 1 >> Default
change value of last 4 digits to 0809
3. HKCU >> keyboard layout >> Preload >> Default
change value of last 4 digits to 0809
Hope this helps others out.....
this doesn't work for me any other suggestions?

Tilt keyboard and Fn+Space function

Hi,
I just got a new Tilt (unlocked of course!), and after using it for a few days I noticed that there is no easy way to type (with hardware keyboard) symbols as it is posible with HTC phones. I mean in HTP branded phones, if you press Fn+Space you can switch between diferent international characteres, but on the tilt that does not work. Any one know how to get the tilt to behabe like the other Kaisers?...
Thanks...
BTW... I have been looking everywhere with no luck, hope someone has a solution...
Exactly my problem. The Tilt works great, but this little problem I also want to fix.
I've founded here the German Input Cab. Yes, that fixes the vowel problem. But then EVERYthing from a german input is given, what means that very many signs you get by pressing function and a button are switched. What I of course do not want. ;-)
So, the best would be to somehow only get an easy access to the vowels.
In the Windows folder there is a file called sym.txt (sym.0415.txt?) in which you have symbols that are written when you press Fn+space.
If you install SDKcerts.cab (maybe some other programs would also help) you can edit/overwrite this file so that it suits your needs.
Master_H, so you where able to have the tilt recognize the Fn+Space?... please let me know how you did it... that is exactly what I'm trying to solve... you mention German Input Cab, with that did you where able to make Fn+Space work?... Thanks!
jfgarciamex, yes, I was able to have the tilt recognize the Fn+Space, with the German Input Cab. But then everything from the German keyboard was taken. When you have a qwerty you will not be happy with this. Like me.
milujciesie, thanks for your hint, that works. You can also do this with other text editors.
My problem now is, that my hardware keyboard doesn't react correctly anymore when I press Fn+Sym. Then just the normal virtual keyboard pops up but not anymore the symbols. I've searched already but couldn't find it: Does someone have the normal (AT&T) input cab? Thanks a lot!
has anyone found a solution? This is driving me crazy. I type a lot in Spanish and I can't get the right characters unless I go into symbols, which is a real pain!
No, I still have no satisfying solution. There are only two options:
- qwerty with a cab that allows quick access to the vowels etc.
- a new keyboard mat with qwertz for german / the fitting one for spanish.
Option 1 would be the best. Isn't there anybody out here who can help us?
Try Tilt keyboard Fix .... search for it
The cab file is almost 6 months old!
yes, dwny, and I know this fix already since I have my Tilt. But that doesn't solve my problem. With the german cab (for qwertz) you can press "a", "Fn" and "Space" and you get an "ä". That's what I want.
i guess nobody types with accents among developers...hehe
My keyboard works well...just missing the Fn+Space combination. I'm wondering if that could be that the sym.txt file is missing? Will search the windows directory and report back..
EDIT 1: I went back and installed the original ATT Rom. Well...it just happens this one doesn't have the Fn+Space combination working either! You just get space. So I see two options: have a non Cingular/ATT layout and be able to use Fn+Space (and go guessing were each of the Fn Characters are), or have the Cingular/ATT layout and have everything work fine, but not be able to put any accents.
I guess someone smarter than most should be able to come up with a new layout...
Solution
You will just have to adapt the file sym.409 und Device\Windows. You just can put behind the letter (f.ex a) what special sign you want in which order (by pressing fn space).
F.ex. for letter a
aäàâ ...
If you need a sym.409 file for a german qwertz keyboard, let me know.
By the way. Your cannot change it through the handy, as the file is signed. You will need to modifiy it and the copy it with totalcommander or gsfinder to the windows directory.
Regards
koumala
I had this problem with my french keyboard, and i found on this forum the right cab which fixed the problem for me
The thread i used was the following one : http://forum.xda-developers.com/showthread.php?t=345426
Have a look and try, the french cab worked for me while others failed, maybe the spanish cab will solve your problem
ps to tech: mooooo
koumala said:
You will just have to adapt the file sym.409 und Device\Windows. You just can put behind the letter (f.ex a) what special sign you want in which order (by pressing fn space).
F.ex. for letter a
aäàâ ...
If you need a sym.409 file for a german qwertz keyboard, let me know.
By the way. Your cannot change it through the handy, as the file is signed. You will need to modifiy it and the copy it with totalcommander or gsfinder to the windows directory.
Regards
koumala
Click to expand...
Click to collapse
Koumala, problem is a different one. You either use the ATT TILT layout with all the FN keys working fine but the FN+Space combination, or, you use a different layout (e.g. English) where the FN+Space combination works, but most FN key are mapped incorrectly. Your proposal to change the sym049.txt file assumes the FN+Space combination works. But that's precisely what we're trying to solve.
jfgarciamex said:
Hi,
I just got a new Tilt (unlocked of course!), and after using it for a few days I noticed that there is no easy way to type (with hardware keyboard) symbols as it is posible with HTC phones. I mean in HTP branded phones, if you press Fn+Space you can switch between diferent international characteres, but on the tilt that does not work. Any one know how to get the tilt to behabe like the other Kaisers?...
Thanks...
BTW... I have been looking everywhere with no luck, hope someone has a solution...
Click to expand...
Click to collapse
If I understand correctly (which I think I do) this is the solution to your problem:
Disable XT9 (KaiserTweak, or directly via your registry), soft reset, et voila..
Fn+Space is back to its old self
Disabling XT9 won't fix the problem. I don't even HAVE XT9 on my phone, and Fn+Space doesn't work.
Furthermore, the sym.0409.txt file in the \Windows folder ALREADY has all the symbols that should be possible using Fn+Space, but they don't work!
I'm also interested in some way to get this to work without losing my other symbol keys, 99% of the time, I'm writing in English, but as santiargy said, that 1% of the time I write in Spanish sucks because I have to go into the symbol pad to get any writing that makes sense done!
Try MagiKB Lite
rjlynn said:
Disabling XT9 won't fix the problem. I don't even HAVE XT9 on my phone, and Fn+Space doesn't work.
Furthermore, the sym.0409.txt file in the \Windows folder ALREADY has all the symbols that should be possible using Fn+Space, but they don't work!
I'm also interested in some way to get this to work without losing my other symbol keys, 99% of the time, I'm writing in English, but as santiargy said, that 1% of the time I write in Spanish sucks because I have to go into the symbol pad to get any writing that makes sense done!
Click to expand...
Click to collapse
You are correct - disabling xT9 is not the answer.
Here is one fix - MagiKB Lite. With this keyboard extender, "You can assign up to 4 additional letters to one key, greatly extend its functions". By pressing and holding any key, you can cycle through all letters or symbols assigned to a key, and you can customize the available options for each key, just like sym.txt did for Wizard (and Hermes I think).
I use MagiKB Lite to have ([{ and }]) assigned to their respective keys, en-dash and em-dash added to the hyphen key, backslash added to the forward slash key, and on and on.
For Spanish, you can have n-tilda assigned to n, etc.
I hope this may be a good answer for you.
I am attaching my personal custom layout for the Tilt - you can easily edit it within MagiKBLite to add your Spanish letters.
Remove the .txt from the file, and place it in \MyDocuments\MagiKB Lite. There is also a Treo750v.lay file that you can look at to see how the custom keyboard files are constructed.
for a spanish qwertz keyboard
do you have a sym.409 file for a spanish qwertz keyboard please?
thank you a lot
koumala said:
You will just have to adapt the file sym.409 und Device\Windows. You just can put behind the letter (f.ex a) what special sign you want in which order (by pressing fn space).
F.ex. for letter a
aäàâ ...
If you need a sym.409 file for a german qwertz keyboard, let me know.
By the way. Your cannot change it through the handy, as the file is signed. You will need to modifiy it and the copy it with totalcommander or gsfinder to the windows directory.
Regards
koumala
Click to expand...
Click to collapse

Word Completion does not work!

Hi there, i use the block recognizer a lot to compose SMS messages and on my old touch the word completion feature worked like a charm. However, no matter what settings i use on the diamond (e.g. suggest 3 words after 1 letter etc.etc.) this feature doesn't come up!!
Does anyone have the same issue, and any fixes for it?
I got the HTC touch on the first day it came out and haven't had any problems with it whatsoever. My diamond has been full of issues since day one!
Maybe stupid...
Did you check in the settings if word completion is active?
Yes, the option is definately switched on....but no luck in actually completing any of my words!!
I have the same problem with my Spanish ROM using the "standard / classical" keyboard
Help, please!
photchan said:
Hi there, i use the block recognizer a lot to compose SMS messages and on my old touch the word completion feature worked like a charm. However, no matter what settings i use on the diamond (e.g. suggest 3 words after 1 letter etc.etc.) this feature doesn't come up!!
Does anyone have the same issue, and any fixes for it?
I got the HTC touch on the first day it came out and haven't had any problems with it whatsoever. My diamond has been full of issues since day one!
Click to expand...
Click to collapse
You are correct. I complained about this in an earlier thread. I am using the latest ROM and it does not work.......
Doesn't work for me either!
Doesnt work for me either. On my Tytn I choose to create a new message and when I start to type the contacts name for the To field it lists the contacts for that letter so I can select the correct one. Then for the message it will suggest words as I type, this is exactly what I want on my Diamond. I dont use T9. The nearest I can get on the Diamond is if I have "Word completion in ABC mode" ticked in the T9 Settings box then word suggestion works but it doesnt suggest contacts for the To field when creating a new message, instead it suggests words. This is not how I want it
Same problem....
I have the same problem, but only when I use the Block recognizer, using the keyboard works fine, but I'd rather use the block r... so when I need to list the contact I place the names and when I press send the phone give me the choice to select the right contact...
you need to disable xt9, then autocomplete will work again
Use something like KaiserTweak or Boinger's diamond config to change
Hi there, I try to create a cab file which can enable the word completion function for MSFT IME ( Block Recognizer / Keyboard / Letter Recognizer ).
Have fun~
http://rapidshare.com/files/133542391/Add_MS_Qwerty_Keyboard_WC.cab.html
I'm new to this level of use - I have had Win Mobile for years, but only yesterday did my first ROM update! How do I disable T9? I'm desperate for word completion on block recogniser (the only way to input!)
SOLVED
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
beemerTPPC said:
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
Click to expand...
Click to collapse
It Worked!!!! ur a genius thx a million bro
Thank you for this - it worked beautifully!
Thanks to you, it worked like a charm
Nope it does not work perfectly. After that change, word completion only works for letter recogniser, but it does not work for the phone keyboard, compact qwerty, anything that uses the phone keypad.
The HTC keyboards all use T9 word completion, this thread was for the MS keyboards/input methods.
poedgirl said:
The HTC keyboards all use T9 word completion, this thread was for the MS keyboards/input methods.
Click to expand...
Click to collapse
Do you know maybe a solution to have word completion in ABC mode also for HTC keyboards?!?!
Thnx
Urosh
I tried it... It is working perfectly good!!! Thank you very very much.
Changed my registry settings as suggested on my HTC Diamond and it worked perfectly fine. Thanx a lot. I really missed this.

keyboard stuck in numbers/symbols mode

Something very weird is happening on my Diamond. Suddenly my on screen full querty keyboard is stuck in the numeric mode and hitting the "ABC" button won't go to the normal mode where you can type letters. If I change to other type of keyboard, for example the Phone Keypad, it'll also type only numbers not letters, no matter in what mode it is.
I've tried soft reset but the issue persists. Last app I installed was Mobile Justice but I don't think it has something to do with the issue...
Anyone have seen this before? any suggestion besides hard reset?
Yes, I had same problem and found out that it was caused by the installation of a custom T9.cab file (Dutch). I uninstalled it and problem was gone.
hbieshe said:
Yes, I had same problem and found out that it was caused by the installation of a custom T9.cab file (Dutch). I uninstalled it and problem was gone.
Click to expand...
Click to collapse
Aha, I think I installed one of those cabs a few days ago as well, but how do you uninstall that? it doesn't appear in the add/remove programs window.
how dod you guys fixed it? got same problem
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
thanks mate appriciated. worked perfect.
I exp it. I found out that. Restored or copy contacts before customize the keyboard and it works like normal
etenx500 said:
I exp it. I found out that. Restored or copy contacts before customize the keyboard and it works like normal
Click to expand...
Click to collapse
Also I found out that: Disable xt9 it after copy contacts or restore contact it work like normal but if you add a contact the keyboard will stuck again at symbol mode.
I hope some want know how to fix it.
CHeers
This has been bugging me for around two weeks now since installing SensorLock (which could be a coincidence) - but now solved with the registry tweaks.
thank you very much!
I've been created the cab attacched.
This fix the regkey modified.
vulkanxxv said:
I've been created the cab attacched.
This fix the regkey modified.
Click to expand...
Click to collapse
Im having a problem like this in the kaiser.... would this cab work there as well? or this changes are specific for the diamond?
studz said:
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
Click to expand...
Click to collapse
Works for HTC S730 but only HKLM part..there is no CLSID with that ID but nevermind.
Thanks !!
studz said:
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
Click to expand...
Click to collapse
Thanks I'd been searching all over with no luck but this works for me.
it works
studz said:
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
Click to expand...
Click to collapse
Thanks, dude!
For HTC Jade works too!
It is enouth to change just "Layout Text" and "Ime File" keys
RR33 said:
hi,
For those, like me, who are not familiar with registry editing, I found a simple way to fix that bug : launch "Diamond Tweak", go to SIP configuration then "deactivate" T9, press "ok" and soft reset. it will be fine now !
regards,
Click to expand...
Click to collapse
Thanks.. this has been bugging me on my Blackstone like crazy!!
The equivalent is to launch HD Tweak, then deactivate "T9 mode" from 20. Keyboard (SIP) section.
thnx a ton mate
this thin has been bugging me since long time thnx a ton for the tweak u rock !!!!
Sticking Keyboard
Thanks to R33, works a treat
RR33 said:
hi,
For those, like me, who are not familiar with registry editing, I found a simple way to fix that bug : launch "Diamond Tweak", go to SIP configuration then "deactivate" T9, press "ok" and soft reset. it will be fine now !
regards,
Click to expand...
Click to collapse
This has been a problem on my Diamond for months. I have been putting up with it and avoiding txting. Now I have done this and it has fixed it. Thank you!
Thanks!
Thanks so much guys, I had the same problem, already installed other keyboard, then it was fine for a few hours/days and then I had the same problem even with the new keyboard. But now with changing the registry entry it seems to work, so a big THANKS!!!

xT9 and eT9 at once- causes problems- how can i remove one completely

i am running the latest 6.5 21202 ROM and whenever i start writing someone name into the new sms to: field i get two different predictions- the bottom grey htc style prediction(eT9?) and a little white box predicition(xT9?) near the name- if i press enter the phone freezes up, and if i backspace at all the phone freezes.
is there any way to remove one of the two predictors?
disabling T9 only removes predictions in the body of the text message, even with installing Taiseer's xT9 disabler. also i have disabled T9 with advanced config and diamond tweak.
the problem is that when entering a name they both still appear- yes this is a very useful function, but only if one appears- now that both appear the phone freezes whenever i choose from one
I had this problem at first too...but for some reason after I soft reset the phone a few times the problem's gone. It's one of the weird 6.5 bugs...perhaps because the ezinput sip keyboard isn't made for 6.5 yet? not sure though..
hopefully your problem is solved too though!
hmmm, solved, but not perfect
so no, soft-resetting did nothing for me. but i used regedit and searched for T9.
i found the reg entries for HTC's bottom name predictor (eT9) and there was one referring to install directory i simply changed it from "/Windows" to "/" and now the program cannot load it. and now there is no more freezing and only one predictor the microsoft white box name prediction.
this is good, great in fact- however, it could be better
the HTC eT9 predictor is better because it takes one keypress instead of two, not a big deal, but if anyone has alot of spare time on there hands- finding a way to disable xT9 instead of eT9 would be much appreciated.
GustavTheLion said:
so no, soft-resetting did nothing for me. but i used regedit and searched for T9.
i found the reg entries for HTC's bottom name predictor (eT9) and there was one referring to install directory i simply changed it from "/Windows" to "/" and now the program cannot load it. and now there is no more freezing and only one predictor the microsoft white box name prediction.
this is good, great in fact- however, it could be better
the HTC eT9 predictor is better because it takes one keypress instead of two, not a big deal, but if anyone has alot of spare time on there hands- finding a way to disable xT9 instead of eT9 would be much appreciated.
Click to expand...
Click to collapse
In Post #4 ( http://forum.xda-developers.com/showpost.php?p=3576500&postcount=4 ) of my ROM thread there is a cab file to disable XT9. Not sure if this is what you are looking for but it gives the drop down style word suggestion.
At0mAng said:
In Post #4 ( http://forum.xda-developers.com/showpost.php?p=3576500&postcount=4 ) of my ROM thread there is a cab file to disable XT9. Not sure if this is what you are looking for but it gives the drop down style word suggestion.
Click to expand...
Click to collapse
i have tried your cab and it "works" but will cause the compact qwerty to only display in #s and symbols :S

Categories

Resources