anyone having this problem? been using the vista rom for 2 months now it's giving this error randomly and it hangs my pda from time to time and the only way to reset it is to take out the battery.. got to do with trusted signee or something.
DaveTeu said:
anyone having this problem? been using the vista rom for 2 months now it's giving this error randomly and it hangs my pda from time to time and the only way to reset it is to take out the battery.. got to do with trusted signee or something.
Click to expand...
Click to collapse
any luck with this error, i have the same problem but only in email and messaging...
I got the Same Error in A.Z.T.O.R. Rom when i try to scroll to left/right in E-Mails.
Biotouch.exe could not get started or mabye its no trustet certifikate.
sry 4 my bad englisch.
Edit: my Device is a HTC Touch Diamond
Related
the wifi con`t turn on
it`s go back off
please help me
make sure that you don't have any programs runing in the background that forces wifi to be turned off.
no not running any program
i have 2 phone`s
only one have this problem
Same here, unable to turn ON WiFi. Once clicked it goes OFF, as if it cannot find the link to WiFi (driver/hardware). I tried several ROMs and the problem persists!!!
Before all was working fine, then all of a sudden it stopped !!!
What can be the reasons/issues ... how to find out ... please help.
Guys! I have the same problem.
DIAM100 from USA under Hard-SPL 1.93
Tried different ROMs (several RUS, WWE, newest 6.5 beta 1), hard reset, different radios, but with no positive result. WiFi can't be switched on nither from Comm Manager (clicking on WiFi) nor from configuration utility (clicking on the link Turn on wireless LAN).
Please advise how to fix.
Please assist us to find out the problem ... perhaps it is hardware and we need to take it to service center!
Try taking the battery out for 10 mins. It worked for me with a GPS problem, it might work for WiFi.
Let me know what happens, if anything!
steveianson said:
Try taking the battery out for 10 mins. It worked for me with a GPS problem, it might work for WiFi.
Let me know what happens, if anything!
Click to expand...
Click to collapse
Just today I've accomplished battery calibration (full discharge, take out the battery for 10 mins, full charge without turning on the phone, take out the battery for 1 min).
Nothing happened with WiFi. Problem still exists.
Also today I've downloaded official ROM (_HTC Touch Diamond_QMR_RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe) from HTC site using serial number and flashed it to the device. Completely the same problem
well, i seem to be having same problem.. (cannot turn on wifi even after clicking several times on "Turn On Wifi")
i also have another major problem with my Diamond : MicroP error.
MicroP error - also got it from yesterday and no clue what it is. Gotta going to service center now!
EazyVG said:
MicroP error - also got it from yesterday and no clue what it is. Gotta going to service center now!
Click to expand...
Click to collapse
Please tell us the result!
And another question - where do you see MicroP error?
Me too...
I also have this problem without ever installing a cooked ROM or using HardSPL...
Did anyone find the solution?
I bought my HTC aborad three weeks ago and I have no warranty. I have no idea what to do. My wifi is stopping working twice a day and I it works sometimes after reseting it. Please, help me!!!
mine too.. is it bugs..???
anyone help plss
Hi community,
it's been a long time ago since I updated my XDA-Diamond. Everything worked fine, the update suceeded and the Original HTC-Logo was displayed at boot. Then I made a big mistake: I tried to update the Radio and there it happenen:
I connected the XDA to my PC. I started the Radio-Update-Program on the PC. It told me, that it needs an acknowledgement from the XDA.
Then, I acknowledged the message on my xda...but at the same time, the software on the PC displayed a "Timeout" (within 1 or 2 seconds...not even enough time to acknowledge if you had you finger on the XDA-key the whole time). I recognized the PC-message just after acknowledging.
After that, the display fade out showing some cryptic symbols. I was in fear that I killed the XDA.
But after removing the battery it came back...fist I rhought everything would be alright. But I was wrong. After retrying the update process, the XDA just crashed by connecting the USB-Port. Even after resetting it.
Then I tried to restor the original firmware...the same here...the xda crashed after connecting to the PC and starting the update-tool.
I lived with that a long time (4 months or so) but meanwhile, the XDA crashes even just by connecting the powerplug...not right by time...but after some hours. Then the screen freazes or it resets and show the Pin-input-page.
Why did the software timeout within some seconds? This is the question that bothers me. And how can I restore what the XDA seemed to have erased after losing the connection?
Thanks for helping
Hellmachine
Specifications:
Mobile: XDA Diamond
R: 1.00.25.05
G: 52.29.25.12H
D: 1.93.00.00
Really no one who had this problem before?
How can I fix it? I want to sell the phone because I can't upgrade it anymore. As I said, it is fully functional, but everytime I try to flash it again, the screen shows "White Noise" and the phone hangs.
Please, you guys programmed the upgrade and the tool...what happened here and why has there there a timeout after some seconds?
Thanks in advance
It has been over half a year now and no one ansered my thread. The phone still crashes and I want to get rid of it.
So, please. Some of you created the upgrade tool that crashed my phone...and no one can give me a hint how to recover it? This cannot be.
There must be a way to restore the original Software.
Kind regards
Hellmachine
I believe my battery ran dead and i didnt notice, now my when you press the power button the blue o2 loading screen comes on then about 2 seconds later the device restarts and same thing over and over.
If i plug a an ac adpater in (i've tried 2 and an incar charger) the light ring goes up twice then then phone triggers a start up and gets stuck in the loop. I've tried leaving it in this loop for 10mins see if it would charge the battery but no luck.
I have tried doing a hard-reset 3 times now it says its done ok soon as i press vol up to boot it goes into the loop.
Is there anyway i can charge the battery if this is the case or is there another problem thats causing this?
Any help would be appreciated.
Are you sure the battery is dead?
If you left it in the loop for 10 mins I would have thought that it would flatten it such that it doesn't light up at all.
I know the battery was very low before it started doing this and i hadnt installed anything new in months.
Usualy on the o2 screen it shows red writing at the top and bottom, its not showing that right now if that means anything.
Its a stock o2 uk rom with no changes to the radio and official battery.
I've just installed the latest rom from the o2 website (keeping it stock incase i need to send it off to them) and still doing the reboot on startup thing.
Contacted o2 see what they say but if anyone else has any ideas im open to suggestions
i've got the same issue and the battery won't charge ...i suppose it could be a battery issue, but i'd be sure about it prior to buy a new battery..
Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed
SMeK said:
Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed
Click to expand...
Click to collapse
did you use a modified rom? ..i was told htc repairs only unmodified products, could you gimme more information about it?
No it was not a modified rom, default o2 xda ignito rom.
Me too!
I had the same issue. I tried soft-resets, hard-reset, swapping batteries with another phone (even tried warming the battery in my hands which was suggested somewhere!), reflashing a couple of different ROM's, including Shaks 4.30 and the latest Telstra ROM (2.07.841.2 WWE). I tried using MTTY to reflash the ROM, and reflashing using the DiamonCustomRUU.exe from the PC. (OliNex 1.40 SPL). All of the reflashes were in Bootloader mode (hold pwr and vol down) because I couldn't get it to the point of ActiveSync connection.
Nothing would work.
The winning step that bought me the joy (and relief) I was looking for was downgrading the radio from 1.09.25.23 to 1.00.25.05.
Also, I'm not sure if it is related, but I think the reset button under the stylus is stuffed because pressing it doesn't do anything.
Now I've escaped the reboot loop from hell, I'll run it for a few days before giving it back to my boss! If anyone's interested, I'll update you in a few days.
HD.
could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error
yves_the_man said:
could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error
Click to expand...
Click to collapse
I had to install the radio in Bootloader mode (hold pwr and vol down), but there was no issue with the install after doing this. Have you checked this thread? I don't know if that thread will help you fix your issue but it might be worth a look.
What exactly was the error message? Perhaps a search on that error message will help you.
HD.
I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is
Not really on topic, but...
yves_the_man said:
I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is
Click to expand...
Click to collapse
262 isn't an necessarily an ActiveSync problem, more of a connection problem. Try post 9 here. Or try uninstalling Active Sync altogether and installing radio and ROM via MTTY. Since it is a connection problem, you could even try a different USB cable.
But I suggest you post 262 queries here, here, here or here.
BTW, Are you using XP?
HD.
Has anyone run into this with the HTC TyTN II.... where suddenly it just starts acting slow?
It basically sits on the 'Windows Mobile' screen for about 5-10 minutes before it loads the OS screen. What the heck?
I guess the next thing for me to do is to reprogram the ROM? what sucks is ive never done this...
EDIT:
Now im getting this message:
"The Device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source....." couldn't write up the rest....
try to pt another rom.
and radio too
try to flash everyting agian. this will fix the problem i guess.
Ok after receiving my warranty replacement Touch Pro 2 from T-Mobile I go to unlock it with Hard-SPL and of course got the license error. I got this squared away with the developers but now when I run Hard-SPL in automatic mode nothing happens...Windows 7 acts like its working for a few seconds but no windows pop up, no error messages, nothing. The phone screen doesn't go black or reboot either. Trying manual mode the phone resets but then it just seems to hang at the 0% progress indicator forever. I sync just fine...not sure what else I can tell you guys...what is going wrong? With my first TP2 I never had a problem...
Try running as administrator and disabling your anti-virus software when you run it.
did that, still no luck, any other ideas?
Have you got your issue resolved btw? I'm stuck with the same problem now...
sugarmurali said:
Have you got your issue resolved btw? I'm stuck with the same problem now...
Click to expand...
Click to collapse
in another of your posts I saw you had a RHOD500 device. so don't try to use the Hard-SPL for tmobile tp2...
use this one: http://rhodiumw.htc-unlocks.com/hard-spl.php