Related
Hello guys!
I got my MDA Vario last week, and I am very much impressed with it!
I got the MDA Vario brand new without a contract and my intention is to use it with one of those O2 Genie PAYG SIM cards. So.... after much reading this excellent forum I figured out that I would need to unlock the SIMlock on the Vario. Got hold of the Lokiwiz utility, followed the advice on these forums, and tested it with the Orange SIM in my regular phone, and hey presto.... MY PY PHONE IS UNLOCKED!
Next step - to remove all T-Mobile customisations. Again, I had a simple bit of advice from one of you good folk - hard reset, then soft reset when the phone starts to install customisations and now all the pink girlie stuff has gone! Only reminant of T-Mobile left on the phone is the logo on the phone dial keypad.
My thoughts are now with upgrading the ROM. T-Mobile have been very slow with updating their ROM package -a new one is apparently due very soon. Now.... in preparation of installing a new ROM, Ive CID unlocked my phone. I would really like to know which ROM I should upgrade to - there are so many out there! As the phone has been CID & Sim Unlocked, does the phone remained unlocked irrespective of what ROM I install? Can I install a T-Mobile ROM after changing it to another?
As I intend to mostly use an O2 PAYG SIM in it, would it be better to use a new 02 update? If so, which one? Or do I go for another ROM? All very confusing! Finally, Ive heard that I cannot browse the net via GPRS on an 02 PAYG SIM. Is that true? Do I need to flash an ExtROM too?
I know Im asking a lot here and am being a bit of a pain in the backside, but I would really appreciate any and as much advice as possible as I realy dont want to end up with a dead phone! Many thanks in advance!
Hi, yes you could wait for the new rom and i am a believer in sticking with your manufacturer roms because many of the posts here seem to people experimenting with different roms and it all going wrong - lol.
But if you do upgrade proberly the commonest choice is the aku2 qtek rom that i use
download here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
and the o2 aku2rom not a bad idea too, but without the o2 extras.
Yes you could then upgrade to the t-mobile rom then but often you need to unlock again with lockiwiz 0.3a.
PAYG o2 will browse internet but msn etc.. does not work.
btw yes you are a pain in the arse but then most people here are!! :lol:
Cheers Mark! Nice to have some basic advice - very reassuring for a thicko newbie like me!
Well... I couldnt wait for the new T-Mobile ROM and went ahead with the upgrade with the Qtek upgrade you suggested.
Was a little tricky at first because the upgrade wouldnt happen (port failing to open) but I had a few programs running in the background on my desktop PC and shut them all down so that I had a `Clean` PC. The upgrade process was then as smooth as a babys bottom.
MDA Vario is running really well - well worth the upgrade IMO. Everything seems quicker and generally better. Only problem I have is with wifi - it seems to take ages to make a connection with my PC (ad-hoc peer to peer) whereas on the original T-Mob ROM it was very quick. Any ideas here?
I read that you say I would need Lokiwiz 0.3a to install the AKU2 T-Mob ROM when it is eventually released. I was under the impression that once the PDA was unlocked (lokiwiz 0.2b) I wouldnt need to unlock it again. Is it different with the very latest T-Mob ROM? Can I not revert (downgrade) to the original T-Mob and then upgrade to the new T-Mob ROM? Ive not heard of lokiwiz 0.3a being out yet - would it be as simple as unlocking with lokiwiz 0.2b?
Finally, how on earth do I get the latest 02 ROM? I need to enter my 02 mobile number and IMEI to download it. Do I need lokiwiz 0.3a to install that or any other current ROM?
Cheers for your friendly advice.
Al.
Hi, no problem - glad to help.
Lokiwiz 0.3a is out see here http://forum.xda-developers.com/viewtopic.php?t=50768
For some reason when upgrading (in think it renews cid/spl) to aku2 rom seems to lock again - i had to unlock my qtek with above tool.
Yes you can go back to original rom - but if does not work use farias method of unlocking and downgrading rom (post is in this forum)
Most of the roms are in the wiki http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
including the o2 roms, but i would refrain from too much chopping and changing because you can destory the bootloader and then has to go back to the manufacturer.
Many reported problems with the wifi setting up - i would read some of the threads in the wizard forum if i was you. First thing to try is tweak wifi on device to wlan g and it may work better.
see registry tweaks here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
btw good to hang out in the wizard forum too - you will learn alot of tips from there.
Want to also say thanks from another newebie with T-Mobile MDA. Have unlocked phone and CID and flashed with 2.17 QTEK ROM and all is good.
Thanks !!!
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Jesus sbouri that logo was killing me, brilliant tip, nice one mate!!!
hi
i just got my mda vario and manage to unlocked the phone with lokiwiz03. i know my phone is now sim unlocked, but how do i check if it is cid unlock as well?
i am eager to flash the rom with the qtek version but i have no idea how to do it.
i know i must have my phone cid unlock in order to install a different rom, so do i just download the latest qtek rom, connect my device to usb and activesync it, and then just run the RUU?
i am really noob here.
cheers.
Hi mate if i was you i would use MR CLEANS ROM i flashed with that and its excellent, tottaly clean with no tmobile crap and i didnt do anything with the cid so dont worry.
ftp://xda:[email protected]/Uploads/Wizard/ROMS/MrClean_RUU_WIZARD_224_AKU23_WWE.zip
Just download this and run follow instructions, real easy. Good luck mate.
thanks for the advice...i took a bold move and flash it with a qtek rom. works like a charm. before that i did cid unlock using lokiwiz02a, not lokiwiz03.
i will take a look at mr.clean rom at a later stage.
i notice that my imei number is different from the one in my box. does flashing the rom change it?
now my next task would be update to a better radio rom and check out the extension rom.
cheers.
SBouri said:
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Click to expand...
Click to collapse
Great tip, worked like a charm and left no marks.
Thanks.
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Scottland said:
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Click to expand...
Click to collapse
The mr clean rom is a more advanced rom and has no extras. The qtek official rom is probably a safer install because its an official rom and many good reports of success and users pleased with the outcome.
Yes when you have flashed just input all those settings again.
Plus you can backup your voice tag database between hard resets by copying the file CommandModel1.bin found under the windows folder to your pc or to the memory card. After rom upgrade copy it back to your windows folder and all your voice tags are back!
Create backup of windows\start menu - most programs that are on the storage card dont need a reinstall.
Create copy of pim.vol in the root directory of the device - contains contact and appt information. After flash change the new pim.vol to pim.vo and copy and paste old pim.vol (use total commander or gsfinder file explorers for this) and soft reset and you will have info back.
Create backup of windows\favorites - for all your internet favorites.
That will make restore a bit quicker than otherwise.
Cheers for the info. I was actually thinking of trying the Mr. Clean one first, is there anything missing from this one, or is it just less stable?
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
meschle said:
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
Click to expand...
Click to collapse
True, I didn't think about that. Thanks again.
Ive been using Mr clean rom for 1 week now and its excellent from my experience. Its tottaly clean and runs so fast!
By clean i mean it has no customizations as you will find on official roms. It flashed just like any other rom too. Easy as pie. Just my info as people would like to know.
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Scottland said:
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Click to expand...
Click to collapse
I cant find what you say under settings - what does it do?
Never mind ignore me, that'll teach me not to read T-Mobile's site correctly
Hey all,
I have an wizard (cingular's flavor). Im trying to upgrade to the new t-mobile settings by xelencin, or any package for that matter. Right when the process is about to begin (it says 0%..) the phone will turn off. I then have to reset it and it turns on fine. Ive tried the official t-mobile mda roms and xelencin's and both do it. Any suggestions?
Thanks guys,
Mike
nevermind guys.. i didnt realize the difference between g3 and g4. I "cooked" a new rom and all is good. Sorry for cluttering the forum
Mike
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Jmavatar said:
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Click to expand...
Click to collapse
With activesync on it will say it won't detect the phone plugged in while it's in bootloader mode. Run the ROM update anyway.
Thanks, but it doesn´t work. The Rom software said that is unable to connect with the phone.
I just tried to install the vanilla WM6, and with zhis rom, the installation could begin, but at 95% it happen an error... and i need to reinstal an other time the vanilla WM6.
I tried an other time, but the same error on 95% :-( And i can´t instal others rom.
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
bbobeckyj said:
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
Click to expand...
Click to collapse
Thanks a lot for our support! I still tnhinking I have a brick :-S... Now It only apears the bootloather screen(three colors bars) due to the incompleted vanilla WM6 uppdate.
I think the CID is unlocked. I runed the Lokiwiz, but now, I am not sure if It worked... And now, the phone is without battery!!
Where I can find my original rom? The device is from T-Mobile and is a MDA VARIO. From Austria. I have 2 CD´s, one with windows 5 applications, and other with software... I can´t fin the rom.
Thanks a lot!!
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
bbobeckyj said:
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
Click to expand...
Click to collapse
Thanks a lot!! But it doesn´t work. Error[294] Invalid Vender ID :S
I can charge the battery with the normal charger to 220v.
Any idea??
My IPL is 1.06
and SPL 1.06
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
bbobeckyj said:
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
Click to expand...
Click to collapse
I bought yesterday on a T-mobile shop from Austria. I downloaded it´s roms... but the same problem.
I will carry the device to the shop...
Thanks a lot!!
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
bbobeckyj said:
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
Click to expand...
Click to collapse
Thanks again, but I returned the phone to the shop. Something didn´t work since the beginning. Tomorrow I will reveive a new one...
Thanks an other time!
Hi,
I got a similar problem.
I wanted to install the latest AkU 3.3 on my MDA VARIO but it stopped at 95%.
So I tried to install the oldest version available from T-Mobile Germany.
But now my device restarts again and again.
It says
IPL 1.06
SPL 1.03
OS 2.24.2.8.
and restarts.
Sometimes (with the oldest software version) I can calibrate my touchscreen and then the device installs the T-Mobile software. After that it restarts again and again.
I also tried softrest after the message: in 3 seconds .... software will be installed. Then it reboots and sometimes wm5 starts but is running VERY slow. I can't switch it off using the power buttom.
I unlocked my MDA Vario using Lokiwiz. No CID Unlock just Unlock.
What can I do?
Thanks in advance
very simple, flash back to your original rom, then, CID UNLOCK
Morning all
I have been offered a swap for my iPhone for a brand new boxed Orange TyTn II and Im just wondering if its worth doing?
I have had previous windows mobile phones and do like the phones so I am considering the trade, I am currently on o2.
The thing is i have read all the posts about unlocking and flashing roms etc and im a little on edge about doing it myself as im sure i will break it lol
I would basically need to sim unlock the phone and remove all the orange software as I think it looks naff!
How much work is envolved in doing what i need and how long would it take?
Sorry if im repeating a post, im not the best at forums and get lost with all this info you guys have!
Cheers
Sy
Absolutely YES!!!
There is no contest. The TyTN II wins hands down!!!
Leave well enough alone. Perhaps get a sim unlocker. Just do a search and you should find something. But don't play around with flashing roms etc. You may regret it.
Use the HTC original apps which you will find on a sticky at the beginning of this forum.
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
I'm wondering if i should get a TyTn 2 now or wait for a Xperia.
Checked out the TyTn at a store a couple of days ago and i loved it, the only thing i didnt like was that it doesnt have a radio. Then i read around in this forum and came across the driver problems and the touchscreen bug and due to them i'm more inclined to wait for Xperia, but then i checked out Xperia's design and i didnt like the way the keyboard slides to, makes you operate the joystick with the right hand instead of the left and that's kind of uncomfortable.
seriously, who uses radio? I stream my Sirius satalite radio..
Sirius Pwnz AM/FM
..........
Audio said:
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
Click to expand...
Click to collapse
dont you need to CID unlock it first? what is this hardspl and what does it do?
jonneymendoza said:
dont you need to CID unlock it first? what is this hardspl and what does it do?
Click to expand...
Click to collapse
Yes you MUST CID unlock as well (unless it has already been done, which is doubtful if it is on Orange).
My advice...Before even getting the TYTN II, read the sticky's and Wikis in the upgrading ROM section at least 3 times over to ensure you have an idea of what you are going to need to do before even doing anything. when you think you understand it, read them again.
Then go ahead and flash any ROM you fancy and enjoy the benfits of the TYTN II voer the Iphone.
HardSPL is the replacement bootloader that allows you to install an non original ROM.
Im on T mobile and i hav heard that the ROM is not heavily branded. im just worried about bricking it. i already have the MDA viara 3.
reading this thread http://forum.xda-developers.com/showthread.php?t=334679 doing hardspl, does that automaticly unlock the CID or is there another tool to do that? if so do CID unlock it first and then hardspl?
You will NEED to CID unlock AND HardSPL...Do not consider doing anything untill you are 100% certain of the steps you are performing and why, otherwise you will have a rather expensive paperweight.
EVERYTHING you need to know and more about Rom flashing is contained here
http://forum.xda-developers.com/showthread.php?t=369282
Seriously, ensure you read every link and sub link related to ROM flashing. Even make sure you read the "inspirational reading" bit, that will give you the confidence to try it.
As long as you read you will be fine.
When I was new here I spent 4 days solid reading reading and reading before biting the bullet and flashing my first ROM. At
Thanks for the advice. one small question. if i was to follow this guide : http://forum.xda-developers.com/showpost.php?p=1790046&postcount=3 word for word i should be succesful?
there is one question i am still confused about and thats this hardspl/cid unlock. according to the Thread i linked, all i got to do is follow the guide from HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) and bam im ready to Flash the ROM?
also what are the major benefits of flashing to a custom ROM?
does the procedure from that last link above hardspl AND CID at the same time?
hi i managed to hardspl my device succesfuly. so im ready to install a new cooked ROM? what are the best ROMS out there that i can try. i have seen dutty's ROM that many have used and was wondering if thats the best one
Does the DUTTY rom improve the camera and video playback?
hello: iam trying to unlock my phone so i can update the sotware to windows mobile 6 can anybody help me with this ?
Ok. Several things: 1) If you have the default T-mobile ROM on your Wing, you already have Windows Mobile 6.1. 2) If you post the same question in multiple subforums, you are very likely to be ignored. 3) If you only wish to CID unlock the phone, then all you have to do is flash any other ROM found on this forum. Be sure to search in there for "How to Flash" before opening another thread asking for help. Thanks!
what do u mean default T-mobile Rom?
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
fluoroseal said:
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
Click to expand...
Click to collapse
Alright. If you bought this phone directly from T-mobile US, then you do already have Windows Mobile 6.1. Also, to check for sure which version you have, you can go to Start->Settings->System->About. It will display what version of Windows Mobile you have.
I suggest you start with the wiki. Since you keep asking to 'unlock' your phone to be able to flash a new ROM i'm going to guess that you don't know what your doing. Make sure to read up on what is required to flash a new ROM. If you need any more assistance please make sure to ask the correct question in the correct forum and I'm sure everyone will be willing to help. http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
@elazullizard, unless something has changed, the Wing DOES NOT come stock with 6.1, it comes with 6. Now like I say, that may have changed, but I just bought a brand new in the box Wing manufactured in November 2008, and it booted into stock plain jane T-mobile 6. So yeah, this guy does indeed need to CID unlock and upgrade to 6.1 or 6.5.
thank you. and its hera 110 rom ver. 4.26.531 wwe and i do have windows 6 professional but i would like to cid my phone so it can take a new rom? and you help in this mater?
Yes, first of all soft-reset your device using the little hole on the left hand side of it, as soon as you press the little button in the hole, press and hold down the camera button until the 3 color bootloader screen is displayed...confirm that your IPL/SPL is above 4 and reply back to me with the exact number and we can get you started from there.
hello there ther a little problem I use the divce on and everday as my life line for work and i do not have a spare. and this forum takes forever for someone to get back to u ,
so if we can talk head up on yahoo or let me know when u are gona be on this site so we can do this together thank u paul
its rom ver 4.26.531/wwe
radio ver 03.21.90 and runing windows mobile 6 professional.......
Well my yahoo IM is listed in my profile information, and I still need to know your IPL/SPL in order to help you.
Dear friends,
I use T-Mobile Wing. 2007 manufacture.
Can u help me to upgrade it. It uses Windows Mobile v6.0. I wanted to change it to Window Mobile v6.1 or v6.5.
I use it with another sim card. Not T-Mobile. But it is working properly.
How can I do this?
IPL 4.10.0002
SPL 4.10.0000
Thanks a lot...
P.S. Can I use GPS from my mobile. I couldn't found it.
There are plenty of posts that teach you how to flash custom ROMs. If you don't know where to start try searching for "how to hard SPL." You can flash custom ROMs without having your phone hard spl'ed by using USPL. If you decide not to use hard spl there is a great change that you will brick your phone and will no longer be able to use it again. After all you have to do is search for a flashcenter or use mine http://mywing.info/dl/Flascenter.rar . As for you GPS question, there are plenty of gps programs out there. You just need to buy either an external bluetooth gps receiver or a USB gps receiver. pair it with your phone and your done.