Related
I bought an ATT tilt quite a while ago. It is out of warranty now, and wouldn't you know it, something went wrong.
I'm currently using Dutty's Diamond ROM (with the keyboard fix installed), but the same happened before with the official ROM. While I text some keys don't work. I'll be typing away, just to look at the screen and see that I am missing a bunch of letters, rendering the message unreadable. I then have to go back and fill in all the blanks, and even then sometimes it takes several tries to get it to go. The same happens with the backspace key; sometimes it just doesn't work, other times it does (oddly enough, when it doesn't work normally, it usually lets me hit "function" and use it as the delete key).
My other concern is that there is a ton of lag while typing. It takes a while for letters to show up. Is that normal (for the Tilt, at least. I'm still wishing I had bought a BlackBerry)?
Yeah, I had similar troubles. I just upgraded my SPL and hopefully will be testing it further testing.
what SPL are you running?
I'm not entirely sure, it was a while ago that I flashed the ROM. How do I find out what it is? I tried Device Information, but it wasn't there.
you have to put it in Bootloader mode.
hold power and camera button while resetting with the stylus, then you'll come to the tricolor screen which will give you the SPL info.
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
I am having the same exact problem, 1 out of 5 times it works corectly so im thinking it has to be somekind of software, my problem started when I started using ROMeOS's rom's and I have tried different SPL's virsions.
I've heard that the keyboard/membrane may be the problem. Is that likely? If so, is there anywhere to buy them?
crushbup said:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Click to expand...
Click to collapse
You can use this to update your SPL, I just went from 1.0 to 3.29.
http://forum.xda-developers.com/showthread.php?t=396922
mech_supernova said:
I am having the same exact problem, 1 out of 5 times it works corectly so im thinking it has to be somekind of software, my problem started when I started using ROMeOS's rom's and I have tried different SPL's virsions.
Click to expand...
Click to collapse
What SPL are you currently on? did you reinstall the ROM after updating ur SPL?
crushbup said:
I've heard that the keyboard/membrane may be the problem. Is that likely? If so, is there anywhere to buy them?
Click to expand...
Click to collapse
cnn.cn has them for cheap AFAIK!
Thanks!
But they only have the outer keypad (the one right below the screen). Well, I hope this can be fixed with software, because the only place I saw that listed them showed them at $39.99 and they were out of stock.
whistler4ever said:
You can use this to update your SPL, I just went from 1.0 to 3.29.
http://forum.xda-developers.com/showthread.php?t=396922
What SPL are you currently on? did you reinstall the ROM after updating ur SPL?
Click to expand...
Click to collapse
I got the same SPL he has, I did a hard reset afterwards then downgraded back to 1.0 because I saw no improvement.
I thought RomeOS worked best with 3.29.
crushbup said:
Thanks!
But they only have the outer keypad (the one right below the screen). Well, I hope this can be fixed with software, because the only place I saw that listed them showed them at $39.99 and they were out of stock.
Click to expand...
Click to collapse
http://www.gsm4world.us/shop/tytn-p4550-keyboard-flex-p-1433.html
found this in another thread!
Success! If the SPL doesn't work and I can't convince AT&T to do it, I'll order one and put it in. How do you install it?
EDIT: I just installed skyfire, and noticed that while I was putting in my email and password it was smooth and nothing was skipped. I'm almost 100% certain this is a problem with WinMo itself
I have been having the same problem as you are describing, but I have noticed that it is with heavy use keys like T, H, E, R, S and for some reason V.
I was getting the feeling that it was a hardware problem rather than a software problem because, especially with the V, I have to apply a bit of pressure to get the button to work.
Unfortunately for me I bought mine off Ebay so the warranty is already void.
Incidentally mine started happening when I had the original network providers (T-Mobile) rom on it. I have since installed an original HTC rom and it hasnt made the slightest bit of difference.
So, how easy is it to open up the back of the Tytn II and replace the keyboard unit then?
Oh my god! Thank you for posting this. I swear I have always felt like posting this but always got too lazy. I thought it was only me that had this problem. It is so annoying typing away, and then having to spend another minute to retype the letters that didn't get inputed the first time. It is so frustrating and I thought it was my fault or something, or ROM, I believe its hardware related, but I am not going to spend another dime on this POS. I'm just not so patiently awaiting t-mobile to release their android device, and I will jump ship and never look back! Thanks for the post again, it has given me piece of mind.....ironically
I'm kind of wanting T-Mobile's Android phone, but seeing as how it's made by HTC, I'll wait for the first couple of user-reviews to come out. I bought the Tilt based on website reviews, but man, I was really misled. They said the camera was great, I can only get blurry unrecognizable images. They made no mention of the fact that when you switch to landscape it takes 3 seconds for all the graphics to appear.
I'm disappointed, and I think my next phone will be a plain vanilla flip phone.
Anywho, I'm updating the SPL now, I'll post if it makes any change.
Okay, I now have HardSPL 3.56 and there does not appear to be much of a change. There was some short lag at the beginning of the text string, but afterwards it caught up. I missed no letters this time. I cannot say how much of this was the placebo effect (i.e. it just felt faster), but perhaps if everyone with the issue tries we can have a reasonable answer.
ETA: I added a poll, so if you try this, fill in the poll!
disable word suggestion under Input setting.
i don't miss any characters with it disabled.
It was already disabled for me. I know I didn't change it, I think the ROM came that way.
I just got my Diamond back from repairs and wanted to compare experiences:
1)
I first bought a Diamond two months ago. It came with 1.37 ROM series on it, the screen wasn't too yellowish, but touch function wasn't responsive and the GPS was a MESS!
(of course, I tried many ROMs official and unofficial, almost every Radio ROM and various Hard-SPL. None of that fixed the problems.)
I could cope with with the other flaws, but I just couldn't bear my GPS wasn't getting a fix, no matter how much sattelits were in view...
It worked at first, but soon started to display '66666' instead of the location and finally, it would never display any location again.
I tried every tips and tricks and softs, it helped giving me more and more satellits in view and apparently active, but at the end my crappy GPS could never turn the datas received into a proper location...
2)
I sent my device back to warranty (after flashing back to official ROM and SPL) and had to wait for about a month.
(the technician at first tought I was just a noob unable to set his phone properly, but after two days of attempts, he had to admit that there was something wrong with my phone and sent it to the the headquarter for replacement of motherboard and so on.
3)
The new phone I got came directly with 1.93 ROM and a little bit more yellowish screen, though, there is no spot or stain on it. So the coulour doesnt bother me.
But from the beginning I noticed the new phone was much more responsive even at the slightest touch.
From the first try, the GPS got a fix in about 1 mn time, with only 3-4 satelits in view.
I installed Hard-SPL and the latest Australian Official ROM, and though the screen seems now a little less responsive than before, the GPS is still working, fine.
I'm a VERY happy user of Diamond now, but I'm still wondering one thing:
it looks like once the warranty technicians understood that I was very demanding about quality and complete functions, they took time but gave me a phone totally different in terms of behaviour and quality of the components sensitivity of screen, GPS etc.
Is there some bad production series that they never tells publicly about, and much more better series that they give you as a replacement once they understand you will bother them until the end of time if you are not satsified?
Plz tell your experience about having received two new diamonds with totally different behaviour and quality of the components.
I guess you are totally right!!!
My first device was pealing paint in the aluminium frame on the second day, work very good by the way.
Now i´m on the second device and i my hardware keys, especially the call button is sometimes irresponsive and i have to push it several times to enter the dial.
Tried cooked rooms as well, and the call button issue still remains, so i´m a little unhappy with my diamond experience.
I've noticed that whenever i turn on my display after having left the diamond unused for sometime the lcd doesn't switch on smoothly, what i mean is that it first displays a grey pattern(only for a ms or so) and then the desktop( lcd off>>grey flash>>desktop). Usually the transition from off to desktop is quite smooth, but in my case its not!
Is this a s/w issue or h/w ?
I've never experienced that particular problem myself, but sounds like H/W problem to me...
just been through a couple of other threads related to the grey screen of death...i've had it once...it happened while i ended a call, had to soft reset to resolve it.
take a look at the grey screen of death i'm talking about
Pretty scary indeed!
It might not be a coincidence that you experienced both: grey transition when switching on the screen and once, the grey screen of death after a call...
Two different effects of the same defective part in your H/W?
a solution!, almost
untill now i've had auto brightness control switched off and the brightness was set to minimum to save battery life, but now i just tried switching on auto adjust backlight and the problem seems to have vanished.....coming out of standby is smooth as ever!
although i've to say that i don't quite understand the logic behind it.
*EDIT*
it doesn't help for long
blufade said:
a solution!, almost
*EDIT*
it doesn't help for long
Click to expand...
Click to collapse
This is what I was worrying about...
Your method sounded like a work around to avoid the display failure. But as a matter of fact, there must be a reason for the display to fail. (bad screen, power supply or something...)
By the way, I'm more and more convinced about my assumption that there are bad production series and better ones:
Today I had my device connected to my PC through USB for a couple of hours. In the meantime, I was downloading and deleting messages, watching google video on opera, after that I used wifi etc.
In this situation, my first Diamond would have got hot like hell and my hand could barely stand the pain...
Since many people were complaining about over-heat problems, I thought that was a common problem with Diamond.
But the new one did not get that hot. Just a little over-warmed, but definitely not too hot. From that phenomenon, I can see what I felt about a better touch-flow behaviour, a better GPS and so on is a part of a whole:
I was first sold a ****ty phone, and now I finally got a proper Diamond!
People with bad series, you don't have to cope with all those troubles, ask for a replacement phone!
my diamond gets heated up quite a bit at times....but i dont fully uderstand what exactly is the cause.....i've had experiences with the diamond getting pretty hot while using wifi & or gps and on another occasion i was watching a DVDRIP via wifi(@ full power) using core player and also with gps cycle running in the backgroud, still the diamond stayed well within reasonable limits.
i think it has to be a software problem, possibly the radio s/w
would you mind sharing the radio version of your diamond?
As written in my signature, I'm using the 1.00.25 which is included in all latest official ROMs.
By the way, I hope you did not cast a spell on me! (just kidding)
Today I experienced my first grey screen!!!
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Just for one second, looking like an old black and white TV screen trying to tune on channels.
Hope that was the first and last time. In ordinary calls, (without being synchronized to the PC at the same time, it never happened so far...
sorry to hear that my friend
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Click to expand...
Click to collapse
I'd the same experience except for the fact that my diamond wasn't connected to a PC.
I hard reseted my diamond yesterday, but the grey splash while i turn on the display from standby(post 3) still exists ( ......i don't suppose its a software problem anymore.
blufade said:
i don't suppose its a software problem anymore.
Click to expand...
Click to collapse
Why not trying to send it back to the seller and get a new one?
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
Click to expand...
Click to collapse
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
blufade said:
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
Click to expand...
Click to collapse
You can stay there and wait for 5 more minutes in the shop while they are attending other customers, just to proove your point.
If they are honest, they will not deny the fact!
foxium said:
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
Click to expand...
Click to collapse
knave said:
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
Click to expand...
Click to collapse
There might be some tweaks in the cooked ROMs that avoid the problem, or it might be due to some bad flashing or defective hardware.
If not, how do you explain that I've never experienced this with my previous HTC phones (wizard, Trinity...) nor I experienced it with my Diamonds (the first one and the new one) with stock or cooked ROMs.
except for that very special time, when I received a call while downloading messages through Active Sync.
Hi there. Long-time lurker, first-time poster here. There’s something amiss with the alignment of my HTC Diamond (Orange UK – upgrade from August). It’s as if the screen is repeatedly being pressed on the bottom right hand corner (so it’s pretty much permanently cycling through PROGRAMS, REMOVE, DONE etc.). There are a number of threads floating around this forum regarding screen alignment going nuts, but they all seem to be happening when the device gets hot – with mine it happens constantly, regardless of temperature. And, it’s not just when I touch the screen, it’s all the time.
What I’ve done to try and fix the issue:
-Re-aligned screen (via ‘Settings’) – this usually takes several attempts
-Soft reset
-Hard reset
-Removed screen protector
-Tapped the four corners of the screen firmly (www.htcwiki.com)
-Opened ‘note’, pressed firmly, drawn line with stylus (as advised on www.htcwiki.com)
-Flashed back to stock ROM
None of this has made the slightest difference, so now I’m trying to get the phone returned to stock settings, so hopefully my warranty won’t be invalidated. Steps I’ve taken so far:
-Cleared internal storage (via SETTINGS).
-Hard reset
-Flashed latest (1.93) ROM from the Orange UK website (www.orange.co.uk)
-Identified SPL bootloader (VOL DOWN + POWER + SOFT RESET)
(Tricolour screen):
DIAM100 MFG 64M
SPL-1.24.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
-Downloaded Stock SPL from here (after reading this thread: Heeeeeellllpppp UK ORANGE SPL RESTORE. Am I correct in thinking that despite having the latest 1.93 from Orange, I still install the 1.37 SPL? ). Haven’t yet installed, but will shortly do so having fully read and understood the advice in previously linked post, and info on modmydiamond.info
*EDIT* I had problems restoring the original SPL as the screen has now gone completely ballistic and is constantly registering this phantom pressing of the bottom corner of the screen. I managed to solve the problem by pressing down on the screen (which seemed to 'freeze' it), and then,using the hard keys, navigating to PROGRAMS>FILE EXPLORER and then (still using navigational hard keys) running SSPL-Manual.exe from the Diamond (then following instructions from above thread). Checked bootloader, now says SPL 1.37. Phew.
Now, what I’d like to know is:
Have I missed something? I’ve searched long and hard on this and other forums, and can only conclude that this screen issue is a hardware fault. My first port of call is hopefully going to be returning the phone to Orange, and hoping that they fix it under warranty. Has anyone got experience of returning a Diamond to Orange after having flashed it (and returned it to ‘stock’ ROM & SPL)? All previous posters who’ve discussed possible Orange warranty invalidation after flashing ROMs haven’t updated their thread with the results. Or maybe I’m searching for the wrong terms in the forums ...
If the worst comes to the worst (and having experienced Orange customer services for the past 10 years, I’m fully prepared for this ...), can anyone recommend any reliable HTC qualified technicians about who could possibly diagnose and repair my Diamond?
Apologies for the lengthy post. I’ve tried my best to search the forums for a solution, and I’m acutely aware of unnecessary newbie posts, but I’m kinda at the end of my tether here.
Yours hopefully ....
Orange are not all that likely to go poking around in the insides of the diamond to check every version is stock. I'd ring 154 and tell them the problem, don't mention that it has been flashed or tampered with at all. They will run you through a diagnostic session and probably sort out a replacement for the next day.
If you have an Orange official ROM and Spl you'll be fine, Orange get thousands of returns daily, they are not going to check each and every one for the correct software versions, as long as it has the right numbers somewhere it'll be fine, and I think you have done more than enough to cover that.
If you have any problems PM me.
Thanks for your reply. I called Orange earlier, played a little dumb, and they did just as you said. Although the only diagnostic they recommended was to perform a soft reset (no hard reset, no clearing storage - just soft reset).
I got the feeling they've had quite a few returns, as they didn't ask any questions about whether the handset had been damaged/exposed to extreme temperatures/any other potential damage-causing scenarios. They're sending out a replacement handset shell (handset only, minus battery & SIM) tomorrow morning to swap with my faulty one. I've had issues with Orange customer service in the past, so I am pleasantly staggeringly surprised by this unusually competent level of help from them.
Hopefully I'm not counting my chickens on this one, and the new handset works and no questions are asked about any flashing of the old one ...
Thanks again,
Most phone companies just do a straight swap on the door, so im guessing thats what they are giving you?
If thats the case, then i highly doubt they are going to bother chasing you up on it even if they ever notice. They must have loads of these things coming in everyday, they will probably just ship it back to htc, who might notice, but by then i doubt they will know where its come from.
Though just giving you a new shell seems a bit stingy!
New shell arrived at 9am this morning (I may have to temporarily rethink my opinions of Orange CS ...). The only part exchanged was the phone part - I even kept my old batter cover. I suppose it is slightly stingy, but also more convenient. The replacement is clearly a reconditioned model, which is fine with me. The reason I think it's reconditioned is that the screws inside the phone show signs of having been unscrewed, and there are minute marks around the screen which would indicate it's been removed, and probably replaced. The screen also feels different somehow - as if there are two membranes connecting when applying pressure with the stylus. Not an unpleasant sensation at all though.
So far, it's working well. Super fast (running Orange's latest ROM & Radio: 1.93.405.1WWE & 1.00.25.05) with an immediate response, so I may resist tampering with software for at least a day or two! Apart from installing MSVC - Cyberon Voice Dialler is a total waste of time in my eyes.
Fingers crossed, this handset will last the distance, and there'll be no flashing repercussions from Orange.
Cheers!
orange wont check the internal structure of th device
they once tried to tell me the omnia was unable to be debranded from there firmware it took me 10 minutes to do
I sent my orange diamond back after the backlight stayed permanently on.
I was worried about them checking, but i still left the hard spl on and the rom - they didnt bother checking
would anyone tell me if i send the faulty orange phone to orange service without proof of purchase. Would they check phone or repair it without proof of purchase?
Appreciated for your replies
kamikserg said:
would anyone tell me if i send the faulty orange phone to orange service without proof of purchase. Would they check phone or repair it without proof of purchase?
Appreciated for your replies
Click to expand...
Click to collapse
I've never had to provide Orange with proof of purchase when returning a phone to them but every time I did I had Orange Insurance on it which was bought when I bought the phone so they would have the details on the system.
I doubt Orange check these devices when returned. I sent a phone back for a scratch on the screen, they asked me if it affected normal operation to which I replied "Yes". They said "Are you sure because if we exchange and find the device still works you will be charged for it". I said "Yes", arranged the return and promptly tried to damage the screen further to stop it working. I gouged a crater into the screen without it failing and just had to let it go and hope nothing happened. I've never heard back from them and it's been at least 1 year.
i had this issue as well. i have tried everything then i have found that somone mentoned about AZTOR V7 rom. i had it once i remember. since my diamond came back from repair with comment: unauthorised software/unlock voids warranty i have decided to have last try.
AZTOR V7 rom solved the issue for me!!!!!!!!!!
hail AZ
My Kaisers Camera image has 3 blue vertical lines in it. I just got this phone a few weeks ago, and I didn't see them when I got it. I got it off Ebay, so it is used. Otherwise, phones in great condition.
Is there a way to fix this, or I gotta get the camera replaced? I don't see anyone selling the Camera replacement part. Will T-Mobile or HTC fix it for free?
try changing the cooked roms
mine also had te same problem with shifu rom
now its good with other roms
I also had shifu rom and thought what you said. I switched over to the AthineOS, but it didn't go away. I didn't flash back to the original rom first on my phone. Could it be that I need to flash back to the original T-Mobile rom first and then to AthineOS?
Also, what rom are you using?
I installed the HTC orignal firmware, and then flashed TPCElite. I didn't fix it.
So, does this mean it's hardware?
I have a similar problem but with one red vertical line. I have A TPC v11 ROM loaded. I flashed to the stock rom but it still had the same problem. Any ideas?
Does anyone know where to purchase a rear camera assembly?
I noticed that with the T.i.R. v20 K rom, my Camera produces a strange horizontal fuzy line across my picture. It's not a thin line like the vertical ones, but a thick and white fuzzy bar going across the image. Problem is, it only appears when you look at the image after you're done using the camera.
Oddly, I switch over to a different radio rom 1.65.16.25, and now it doesn't happen. Instead I got one of my vertical lines to appear again. I had a 4th one appear a few months ago, but it had vanished. Now that I installed the 1.65.16.25 rom, it came back again.
By installing the 1.70.18.02 rom, the lines even changed color. Went from blue to red now. Some of the lines are broken, like parts are normal. Plus a 5th line is now added.
I'm nearly convinced that my camera isn't broken, but instead there's a problem with mixing the Radio+Roms. Especially since this is a T-mobile model, which isn't very popular here on the forums. I think by trying Android and using the camera will tell me if the Camera is physically broken.
Who else has this problem and has a T-Mobile Kaiser?
As was previously suggested it definitely sounds like you need to keep testing different radio versions for your phone if you are getting these lines etc. About 99% of the time it's just due to that. I've had a similar problem before and I fixed it by going through about 15 different radios. It took a while but got there in the end. Perseverance is the key. Luckily it doesn't take long to flash the radio each time. Failing that, maybe try a new rom? Good luck.
lol i got the same problem too, eventhough using original rom. I had vertical and horisontal line
[QU yoOTE=Dukenukemx;5141793]I noticed that with the T.i.R. v20 K rom, my Camera produces a strange horizontal fuzy line across my picture. It's not a thin line like the vertical ones, but a thick and white fuzzy bar going across the image. Problem is, it only appears when you look at the image after you're done using the camera.
Oddly, I switch over to a different radio rom 1.65.16.25, and now it doesn't happen. Instead I got one of my vertical lines to appear again. I had a 4th one appear a few months ago, but it had vanished. Now that I installed the 1.65.16.25 rom, it came back again.
By installing the 1.70.18.02 rom, the lines even changed color. Went from blue to red now. Some of the lines are broken, like parts are normal. Plus a 5th line is now added.
I'm nearly convinced that my camera isn't broken, but instead there's a problem with mixing the Radio+Roms. Especially since this is a T-mobile model, which isn't very popular here on the forums. I think by trying Android and using the camera will tell me if the Camera is physically broken.
Who else has this problem and has a T-Mobile Kaiser?[/QUOTE]
Have the same problem with Tir 20K. used to have TPC V11 without problems (Same radio on both) will tr to change ROM/Radio and let you know.
Changed to JJBlaster3 Build 23518 ROM and the lines went away. Same when I had TPC V11. The problem was with the TIR Rom (or the Radio combination with it)
mharrissmith said:
Changed to JJBlaster3 Build 23518 ROM and the lines went away. Same when I had TPC V11. The problem was with the TIR Rom (or the Radio combination with it)
Click to expand...
Click to collapse
Yes I think JJ applied some sort of camera fix months ago in his roms. But maybe it wasn't for this exact problem.
I haven't tried that rom yet. I'll let you know if it fixed it for me.
Hi dukenukemx, is your TyTN II already fixed? Cos mine has the same problem. I've tried flashing around 5 cooked ROMs (always flashing stock ROM in between), and around 12+ radios. By the way I didn't notice if the lines were already there before I started flashing cooked ROMs. The first time I noticed it, there were 5 lines. Now I can see 7 lines. So looks like this can be software rather than hardware related. Hope someone can help me solve this problem.
Thanks everyone... Cheers...
hello need everyone help..
hello guys..
firt i wanna ask about camera also..i got kaiser 130,htc tytn 11 also but not sure what model at&t or tmobile or else..but my phone got front camera.
so my problem is i already flash with shifu roms.and my camera seem had problem to change to the front camera..at the screen there is no more icon for changing camera next to the storage andself timer..then i try to flash with other stock roms..but it wont come back.still the same untill now i cant use the front camera to make v.call and to snap pics
so i need yours advise and if there somebody who can help me please sent at my private mesage..or sent at my email [email protected]
HardSPL?
Could be possible that HardSPL 3.28 to be linked with the vertical lines camera issue?
Coincidentally or not, my TyTN II started to suffer this s**t just after upgrade to 3.28.
For the records, I already tried many cooked ROMs, radios and the issue did not disappear.
Thanks.
svcglobal said:
Could be possible that HardSPL 3.28 to be linked with the vertical lines camera issue?
Coincidentally or not, my TyTN II started to suffer this s**t just after upgrade to 3.28.
For the records, I already tried many cooked ROMs, radios and the issue did not disappear.
Thanks.
Click to expand...
Click to collapse
Have you try another hardspl and see if that solves your problem (also corroborates your theory?)
my camera seems got the same problem..
and my signal receiver is very suck..i always get no service on my device n my camera has a vertical line..
anyone has solve this problem?
love.me said:
my camera seems got the same problem..
and my signal receiver is very suck..i always get no service on my device n my camera has a vertical line..
anyone has solve this problem?
Click to expand...
Click to collapse
Have you tried the solutions provided above.
ChumleyEX said:
Have you tried the solutions provided above.
Click to expand...
Click to collapse
i already done with camera fix,but that cab make my kaiser stuck at smart mobility,,
i use hardspl 3.29 n hardspl 3.56
should I try another hardspl?
Well guys sorry if I look redundant, if a moderator find it to be "same thing again" than previous posts I don't mind you deleting the post.
It is not to complain though, it is a question to know wether my problem is a software or a hardware issue.
I encountered the black screen issue on my XPeria Z1 two times now since Friday (I got it brand new by then). But I encountered it in two exactly similar situations :
-I had light multitasking like Messenger (Facebook);
-Notification Center telling me something;
-Each time, I was about to write a SMS to the same contact.
Is it just an Android bug? I run the stock 4.2.2 no modifications no root whatsoever, I'm already amazed by the phone at its standard state.
I run a C6903 BH90F serie. As I said in another thread, very very slight Yellow hue but bright and clean screen, no other issues encountered during the weekend.
Should I return it to Warranty? Or can I solve this black screen by software?
Bump, I am right now still under Black Screen. Haven't gone the reset route yet because if I go to warranty I will reset it in front of the seller. I need my phone though. And I'm not using it because i'm waiting for you guysto give me your thoughs.
Please help!
if that happened to me, I would probably go replace it just in case.