Hi everyone,
I just replaced my LCD that I cracked with one I received from njbridges. It went in in about 10 minutes and was super easy to do, but I have a problem. If I go into the screen settings menu and click on "align screen", I can't actually do it. It shows the program and the cross hairs in the center of the screen, but when I touch it with the pointer, nothing registers. Now, the screen works perfectly, and appears that the touch alignment is exactly the same, but the issue I have is that I can now never hard reset to flash roms, etc, because if I do I will have to align the screen, which will not work.
Anyone else have this problem? I'm using a tilt, by the way.
Regards,
Jeff
which rom?
trick420 said:
Hi everyone,
I just replaced my LCD that I cracked with one I received from njbridges. It went in in about 10 minutes and was super easy to do, but I have a problem. If I go into the screen settings menu and click on "align screen", I can't actually do it. It shows the program and the cross hairs in the center of the screen, but when I touch it with the pointer, nothing registers. Now, the screen works perfectly, and appears that the touch alignment is exactly the same, but the issue I have is that I can now never hard reset to flash roms, etc, because if I do I will have to align the screen, which will not work.
Anyone else have this problem? I'm using a tilt, by the way.
Regards,
Jeff
Click to expand...
Click to collapse
are you using the stock att tilt rom or a different. if different which one are you using. if your using dutty's rom with the cube the screen alignment is dissabled after the ROM and the initial alignment was made. also, if your using the tilt rom but downloaded the cube program separate that is another reason why as well. the alignment screen doesn't work with cube so they disable it when you install it. so, if you flash to a different rom the screen alignment will work fine. hope this helps, cheers....
Aaaahhhh!!!! Genius!!! You're all genius!
I'm running the stock ATT Rom, but I do have the cube running. So, if I uninstall the cube, the screen alignment will work again?
Jeff
Okay, I uninstalled the biotouch cube, and it all works normally again!
Thanks so much!
Jeff
trick420 said:
Okay, I uninstalled the biotouch cube, and it all works normally again!
Thanks so much!
Jeff
Click to expand...
Click to collapse
you can use the cube but when you want to align your screen you have to use these steps...
http://forum.xda-developers.com/showpost.php?p=1661928&postcount=2
i have tried all versions of touchflo (including ftouchsl) and have never really been impressed by it.
touchflo just doesnt seem to respond very well to finger unless pressing firmly. using the stylus it works fantastic.
to me that seems like touchflo on the wizard can.t track properly when more than a stylys area is pressed.
Im wondering if this is a limitation of the screen. or if its the touch panel driver.
ive tried several tweaks. changing touch panel sensitivity and touch flo sensitivity and i till need firm pressure for touch scrolling to respond properly. this is especially noticable when using s2u2. firm pressure required but if using stylys very light
I recently upgraded my kaiser with a cooked ROM (shifu 10) radio 3.34 i guess. It worked good. After some days it started giving problem with touch. The right soft key was working continuously without even pressing it. When this happens the power button also stops responding , so i have to pull out the battery to turn of the phone. Then i loaded it with original HTC ROM WM 6.1 radio 3.28/3.29. it worked fine for some hours then the problem re appeared. then after some hours the lcd stopped responding to touch , it responds sometimes.. The keyboard worked fine. Then i went to HTC customer care center. They said LCD needs to be replaced. After getting the LCD replaced the problem persisted. what could be the problem???? Please help...
Have you tried...
Have you tried realigning the screen found in setting/ screen/ align screen?
I had an issue similiar at one time, my stylus really wasnt working well at all i was having to push hard with my fat fingers for touch to work. realigning solved my problem. Worth a try.
When i re installed ROM, i couldn't align the screen properly as it was not responding to touch. I'm sure it's not screen alignment problem. Why didn't touch work properly even after LCD REPLACEMENT?
Check this out. I believe this is your problem.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=116836
hello everyone!!!
today, unfortunately my tytn II falled to the ground causing a breaking screen
Touch screen seems works (i tryied calling someone using the onscreen keys and listening the tone touching the screen)
now...i already found the spare part..lcd with touch screen on ebay, my question is when the lcd breaks, what is advisable change...lcd or lcd with touch screen??there are a lot of items....many with touch, any only lcd...ant that confuses me.....
what do you advise???
thank you so much!!!!
Hello to all, am going to ask if anybody of you have a problem in Diamond or TPs Touch Capacitive Pad? I used this app
Nav Debug Tool by HTC
http://forum.xda-developers.com/showthread.php?p=2511016
To check out this multi touch stuff in my TP (though I know before that it has a multi touch feature, I just want to check if it's working properly) but it seems that the pad has a problem. The problem was sometimes, it can register my touch and most of the time, not.. sometimes it can register the multi touch, and most of the time, not .. even the nav wheel has a problem which doesn't register the rotation most of the time. Is this a common problem in Diamond or even in TPs??
I even use the signed os WM6.1 but still has a problem.. so I wonder if any of you guys having the same..
thanks!