I dont get it. I am trying to update my phone with an cooked version (Bepes). I have unlocked my phone, both sim and the other thing cid, id or something.
When i run bepes my phone goes into bootloader (red, green, blue, white screen and then i lose my connection to Active sync. Bepes soon says that the it cant find any connection. I am running Windows Vista and found here a solution but that doesnt work either because active sync loses connection in bootloader.
anyone?
Thx
Björn
People should really see this is the easiest way of flashing.
tnyynt said:
People should really see this is the easiest way of flashing.
Click to expand...
Click to collapse
Yes, I think that is the best way for a safe upgrade!
WaspWorlds said:
...When i run bepes my phone goes into bootloader (red, green, blue, white screen and then i lose my connection to Active sync. Bepes soon says that the it cant find any connection. I am running Windows Vista and found here a solution but that doesnt work either because active sync loses connection in bootloader.
anyone?
Thx
Björn
Click to expand...
Click to collapse
After it disconnects, don't touch anything. Just run the updater again (while the phone is in bootloader) and the second time it should complete the update.
Related
Hello everyone,
I have problems updating my SPV M3000. I've been tryin' it for a month now but it just won't happen. Every Rom i download i get the same problem: I just follow the steps of the wizard. But when the installation begins, my device's screen flickers and then it looks like it starts to glow. At the same time my activesync connection drops. The PC gives the [ERROR 260] this makes sense because i lost the connection. Then i have to soft reset my phone. I have Sim and CID Unlocked the phone.
My current version is 1.3.1.13.
Can somebody please help me.
thnx,
Dennis
have you tried changing your use cable? Seems like it's the source of the trouble...
dbleliev said:
Hello everyone,
I have problems updating my SPV M3000. I've been tryin' it for a month now but it just won't happen. Every Rom i download i get the same problem: I just follow the steps of the wizard. But when the installation begins, my device's screen flickers and then it looks like it starts to glow. At the same time my activesync connection drops. The PC gives the [ERROR 260] this makes sense because i lost the connection. Then i have to soft reset my phone. I have Sim and CID Unlocked the phone.
My current version is 1.3.1.13.
Can somebody please help me.
thnx,
Dennis
Click to expand...
Click to collapse
Have you tried flashing an "official" 2.xx rom?
--M
I did all of that... but still no succes.... Anybody have other solutions??
Thnx
Did you ever get your issue resolved?
I've got the same problem and I've tested my MDA with two seperate USB sync cables. Both sync with ActiveSync and actually transfer data with no issues, but I get the 260 error EVERY time.
Does anyone know if there is a MS service that needs to be running that maybe we're missing? I thought all of mine were, but might not be.
Any updated info would be WONDERFUL.
Read this, at the bottom of the file are the error-codes and try to use another USB-port (preffering at the BACK! of your PC)
ftp://xda:[email protected]/Wizard/Roms/ROM/Update Utility Readme.rtf
nabibakhur said:
Did you ever get your issue resolved?
I've got the same problem and I've tested my MDA with two seperate USB sync cables. Both sync with ActiveSync and actually transfer data with no issues, but I get the 260 error EVERY time.
Does anyone know if there is a MS service that needs to be running that maybe we're missing? I thought all of mine were, but might not be.
Any updated info would be WONDERFUL.
Click to expand...
Click to collapse
Maybe try to use activesync 2,5 beta.
Actually, I have the most recent ActiveSync beta and all. And that nice ftp link doesn't work, which I've noticed seems to be the case most of the time.
Can I download that file elsewhere?
I've actually plugged the USB cable in every USB port I have to test that theory and still no-go.
I'm currently on the phone with T-Mobile PDA Tech Support ( BLECH! KILL ME NOW! )
If I get a solution I'll post it and a walkthrough on how to fix it.
Ok, so, just got off the phone with the T-Mobile PDA Tech Support people and here's the lowdown...
It's the phone itself. Somehow my phone is bugged, go figure. Sorry to break the news to the guy who started this thread, but hey, I'm getting a free T-Mobile Dash out of it
Hey everyone, i just was getting ready to update to the new core rom (from xplore 1.1) and i plugged in my Tmobile mda into my pc that is running xp, and it is not connecting. When i plug it in it like doesnt even try to find it. And when it does try to find it, it just says it can't establish connection with your item.
I was using xplore and this is the first time i had this problem ever. Ive flashed 4 or 5 times and this has never happened, and thats why im posting it in the wm6 forum.
Does anyone have any ideas? HAs this happened to anyone else?
Now i am back on the newest tmobile update, and it is still doing it. Also i installed the newest version of active sync. Still no go. Also i used shell tools to put xplore on my phone, could that have left out some active sync's files? (probably not, last time i put nottosmarts rom on here everything worked perfect.
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.26.10.2
love you
umm....no one?
can't someone at least flame me or something? im still stuck
jawnsixteen said:
umm....no one?
can't someone at least flame me or something? im still stuck
Click to expand...
Click to collapse
I can flame you , lol
If you can't connect, how did you flashed the latest TMobile ? I am not making fun, I really want to help.
i threw it in bootloader mode. It said usb in the bottom right hand corner. It's just that activve sync is not connecting with it. i wouldnt even care, but i think you need an active connection to active sync when you flash with shell tools, which is what i do.
update: i just succesfully sync'd to my laptop running windows vista.
anichillus, do you know if shell tools will work with the new way to flash with vista?
thank you so much for reponding, i really appreciate it...a lot lol
the only reason im doing this is to get to your rom!
jawnsixteen said:
i threw it in bootloader mode. It said usb in the bottom right hand corner. It's just that activve sync is not connecting with it. i wouldnt even care, but i think you need an active connection to active sync when you flash with shell tools, which is what i do.
update: i just succesfully sync'd to my laptop running windows vista.
anichillus, do you know if shell tools will work with the new way to flash with vista?
thank you so much for reponding, i really appreciate it...a lot lol
the only reason im doing this is to get to your rom!
Click to expand...
Click to collapse
I really really don't know that sorry ... I am using WinXP and not shelltool.
Also, why are you using Shell Tool ? Dont't you have G3 ?
Unlock it and easy as pie. I remember papamopps saying that it is possible to flash in vista ...but i don't remember anything about shell tool ...
BTW, you have ZoneAlarm ..or similar installed to the PC where you say that it doesn't connect ? Try and disable firewall ... antivirus ..stuff like that.
well i just don't want to void my warranty, but ill definitly try turning off all the firewalls tommorow when i get a chance, i think im just going to give it a go with shell tools right now and hope for the best
Thank you so much and if you ever need anything i would love to help you in return.
you're the best!
i have the same problem..active sync doesn´t find my wizard..but it´s charging normally, but active sync doesn´t recognize it or i don´t know..what should i do?? i didn´t do any change on my pc..and before it works good..
If you're using Microsoft's OneCare then you may have to enable the Allow ActiveSync to get it to work.
Start OneCare then click the "Change OneCare settings" link on the left
Click the Firewall tab
Click the Firewall connection tool button
Place a check in the ActiveSync/Windows Mobile Device Center" checkbox
Click Okay back to the main page
Hope this helps, but like Anichillus said, it could be any other firewall application blocking it...
yes! all i had to do was turn of norton for a bit and it instantly recognized my device. I was just so confused because this has never happened before and thats why i haven't thought of such an easy explanation. Thank you both for giving me your clear thoughts! lol
Another resolution idea
I had the same issue - I would plug the device in through USB into Vista Ultimate with no results other than the bing bong noise it makes on connection. Checking the device list showed the network pieces being added, but not the actual Wizard itself in the Mobile Devices section. I could not sync, it would not pair, etc, etc.
Resolution (on the Wizard):
1) Settings->Connections->USB to PC
2) Turn off "Enable advanced network functionality"
This of course will not be the resolution for everyone, but in case someone else sees this behavior, here is a list of the symptoms I saw:
1) Plugging Wizard in via USB causes Bing Bong noise
2) wmdc shows no connection
3) device manager shows no Mobile Devices section when connected
4) device manager network adapters may show mobile device services when plugged in
5) If connected in bootloader mode the device manager will show the mobile device
6) You can set up a bluetooth connection (if available on the PC) and sync properly with it
Cheers,
Shoogi
Shoogi, what an awesome first post! Worked perfect for me! Keep it up, great post and lots of help!
i have a problem that when I plug my device active sync connect it and charging starts but after a minute or so active sync disconnected and charging also stoped.
I have installed everything official > rom,radio,ipl/spl etc.
One Care made activesync almost unusable for me. I also had to reflash from THT's rom because I couldn't connect at all unless I hard reset. Makes no sense cause my husband can sync and he had the identical same rom.
Activesync closes and I get fail messages related to connection. I tried several different ROMs. What is the new guy thing I am missing?
robseargeant said:
Activesync closes and I get fail messages related to connection. I tried several different ROMs. What is the new guy thing I am missing?
Click to expand...
Click to collapse
What version of windows and active sync are you using????
XP 2002 Service Pack 2
ActiveSync 4.5
what roms are you trying to flash?
list all the steps you are doing, and go into detail (very important) i.e hard spl all of it step by step
I am working on the HardSPL. I get to the first point in the DOS walkthru where it says I should get to the tri color screen. My Tilt Screen goes white at that point and a minute later ActiveSync disconnects.
robseargeant said:
I am working on the HardSPL. I get to the first point in the DOS walkthru where it says I should get to the tri color screen. My Tilt Screen goes white at that point and a minute later ActiveSync disconnects.
Click to expand...
Click to collapse
BINGO here is the link you need to read..... http://forum.xda-developers.com/showthread.php?t=354061
Thanks I will try that....and believe it or not I have been searching....
robseargeant said:
Thanks I will try that....and believe it or not I have been searching....
Click to expand...
Click to collapse
Search is a good tool, but always read the wiki, it is a great resource to self educate. And I hope that helped.
Hey everyone I have just CID-Unlocked my phone with HardSPL 3.56.
I am about to flash Laurentius26 KDV10 but I don't know what mode my phone has to be in when I run KaiserCustomRUU.exe.
I know my phone must be connected, should the sync icon be green?
Should the Allow USB Connections box be ticked in the ActiveSync Options?
Should I be in bootloader?
Should I just be in the normal windows 6.1 today screen when I run KaiserCustomRUU.exe (The screen says the sim card is missing etc etc with a numpad)?
aaaand finally last one, should I hard-reset the phone before running KaiserCustomRUU.exe?
thanks a lot
Ok. Here's your freebie. But Check out the Top links in my Signature, Very Useful.
ActiveSync Must Be Green.
HardSPL MUST be installed.
Yes you want USB connections.
Bootloader, Doesn't matter.
Normal Today Screen, That's how I do it, but you CAN be in bootloader, but Most people start on the Normal Today Screen.
Is your SIM in?
Lastly, No, Don't Hard Reset until AFTER you Flash and are at the "tap here to set up your device" screen
Hi, I have this problem if anyone knows what i can do to fix this it will be a big help.
First i run CustomRUU with the 6.5 rom in the same folder.
All goes well till it starts to upgrade. As soon as the progress bar appears the HTC goes on standby and the usb connection is lost, thus the upgrade fails telling me to check the usb connection.
Now, i have unchecked the standby modes on the phone via the power configuration and disabled the standby on the PC and still this problem appears.
Does anyone know why this happens? And is there anything i can do to prevent this?
Thanks.
Have you done hardspl?
Yep, i tried that too but it didn't work. I synced the phone up with windows mobile device center then opened hardspl(Jade-HardSPL_V5_20R3_232HSPL) in "run as admin", tried both automatic and manual and got a message saying to make sure the phone was properly synced which it was. I also installed enablerapinew which didn't make a difference.
I have the jade 3G btw.
I can understand what the problem might be .
Any other thought??
If you're using WMDC, I assume you're using vista. Have you tried with XP? I've hardspl a friend's jade without problems as well. He has two laptops, one with vista and one with xp. I couldn't sync phone with vista, so i installed activesync on his xp and it worked fine. I'm not a techie but just sharing what worked for me. Perhaps others might also be able to help.
Hmmm... Im using windows 7 x64. That might be the problem. I'll try on my laptop which has XP x86 and we'll see what happens.
Thanks for the tip mate.
Btw what are the differences between WM6.1 and 6.5? Are the faster? Or just a GUI upgrade? Im using spb shell and it's excellent.
Nope, still the same with XP. Goes on standby and the USB connection gets lost.
I've looked and no one has had this problem before. What else could be the problem?????
Im fresh out of ideas.
maxallepi said:
Nope, still the same with XP. Goes on standby and the USB connection gets lost.
I've looked and no one has had this problem before. What else could be the problem?????
Im fresh out of ideas.
Click to expand...
Click to collapse
Oh dear, sorry to hear that. If you didn't succeed with the hardspl, you could take it back to HTC and tell them you have a problem with the standby mode. Don't say anything about trying to hardspl. May be a hardware problem.
You might be right, Maybe a bad batch or something.
I'll see what i can do.
Thanks for your help anyway.
Welcome. Let us know what happens. i had a problem with activesync - kept disconnecting by itself. The nice people at HTC changed the main board, which meant i got a new phone.