Related
Tried to flash button rom with full battery. Comunication error. Only boots to 3 color bars. Every time I retry the flash the phone starts flashing on and off.
Mmmmmm
What is the problem....?
Does your wizard dont begins... so it wont wake up... dont start ?
You cant turn it on?
What do you mean with turn on and off?
is blinking?
If the problem is its blinking and dont stands on... it is a serios problem but if the wizard saty on ... what ipls and spl got?
What did you do?
Men we need to much info..... than it is on bootloader, i cant upgrade etc etc etc.
FUUUUUUU******@@@@@
while flashing the button rom, i got a communication error. At random times after connecting the phone via usb the screen flashes on an off and communication is lost. sometimes the phone gets mostly through the flash, sometimes it wont even start to flash. But here is the f-ing kicker, while trying to recover in the button flasher proggie, my computer locked up and WILL NOT TOUR BACK ON. thats right, i lost my phone and computer in 5 minutes thanks to this flasding sh*t. i am only able to access this forum via a blackjack II smartphone.
OK, Feeling better
Sorry about that.
I got my computer back on.
It wouldnt even go to cmos so I traded out my cpu, still didnt work.
Put the old cpu back in and it booted just fine. Not sure why that happened but at least my computer is back on.
Ok so back to the phone. It boots to the 3 color bar screen and shows IPL/SPL as 2.25. After connecting the USB cable it will sometimes start flashing, not always. If I restart the button rom flasher it will start to flash, after getting to some % the phone starts flashing.
By flashing I mean the screen flashes on and off. Likely the phone is rebooting itself constantly.
Undo?
Is it possible to just undo what ive done? Is the old info still on the phone? IPL/SPL are still the same as before.
No, your old info is not on the phone anymore. The first thing that is done when the flashing process begins is deletion of your flash on your phone. This may seem like a n00b question, but have you tried using a different USB port? DO NOT flash with a port off of a hub, they are usually under powered when compared to direct board connected ports. Try one on the back of your tower(or directly in your notebook whatver.) and see if that works.
It also failed on the back usb port.
All is not lost is it?
I believe that this phone might need a new battery.
I had some problems with the phone turning off when it wasn't supposed to but it hasn't done it in a long time so I though I was ok. Do you think that a new battery might allow this downgrade to complete?
Its possible. The Wizard is kind of a tempermental device....it flashes when it wants to some time. You can try and see if a new battery is what fixes the problem, but in all honesty, it could be anything.
Xtrange
ok
try to get connecte with that cable other device, maybe is broken the cable...
try another usb port...
download again the button rom, maybe is corrupted.
lets wait what happen
Its your battery , replace the battery and it will charge and then you can flash it,you can get two batteries for a tenner on ebay
Battery
OK, so once the new battery comes, it will charge via usb and wall charger just as it would with the OS installed? Im not sure if charging is dependent on the OS at all.
Thanks for all of your help guys.
Does it charge?
It charges??????
in bootloader dont charge men....
if the phone stuckson welcome screen maybe charges, on htc logo dont, neither on splash screen.
All we do is try to help people to upgrade and try to found solutions for those who made a bad upgrade, but i didn't cook, and dont develop anything so my only contribution is for experiences.
Hope your wizard revives.
My wizard does not bootup...only three color bars
I was trying to flush with new ROM and it stopped after 100% and in the mean times, my system rebooted. Now I got this MDA with three color bars, battery is OK but important thing is that it does not connect to computer thru Active Sync............any help>
Howdy, i have looked at all the guides, done loads of research into upgrading my Ignito.
I have tried to use the Olinex 1.40 and also the signed version....
But when i load it all up, go through the correct steps etc.. My phone screen looks like its just had some dodgy virus and looks like its about to die and then slowly turns off...
It then does a full reboot and its like i have a brand new phone again...
I am at a loss as to why it does this..
Anyone have any tips or tricks as to how to get around this problem ?
Any help at all will be very very welcome
Cheers
Sam
when you do the hard spl, you will only get a black screen and then it will reboot, just as you describe.
Hold the volume down key and then soft reset, if you see OLI anywhere, then it worked.
The problem is when i try the upgrade the screen seems to die aftera bout 10secs and then it says its fully done.
So there isnt enough time for the Hard SPL to be upgraded....
Anyone ?? Please....
The problem is when i try the upgrade the screen seems to die aftera bout 10secs and then it says its fully done.
So there isnt enough time for the Hard SPL to be upgraded....
Anyone ?? Please....
Click to expand...
Click to collapse
Maybe you could give more detailed information, what exactly are you doing, what does the PC end of the process say etc.
Can you take any screenshots, what SPL do you have now - the guide suggests that 1.93 could be better for you than 1.4?
Kim
It says complete after about 10seconds and then the phone reboots fully.
The current one i believe is 1.93.....
I have tried both of the Olinex versions to no avail at all.....
......
MuDvAyNeX said:
......
Click to expand...
Click to collapse
I guess no one is helping because you're not giving us enough information, procedure, XP or Vista, have you tried Hard-SPL 1.93, screenshots or better description of the problem.
Screen goes funny and then reboots just isn't enough
Kim
Well i have tried both of the Olinex versions both the 1.4 and the 1.93.
I am using windows vista and the mobile device center, its fully connected as i do a sync etc before hand.
I then load the Romloader that does the usual tick this, tick that etc.
Once that has happened i click the upgrade button, it then confirms i am going from the current SPL do the one i have chosen.
I click ok and then it goes to the progress section where it says it could take upto 10min, the screen on the phone then looks like it has got a virus and starts to look like its dying.
Meanwhile after about 10 seconds it tells me that upgrade is done, this is while the phone reboots and starts like its a brand new phone again with no changes that i can see...
In all honesty i can't see what i am doing wrong
Scrath what i just put, as i was typing that i was trying the upgrade via my mates XP laptop and it now says in the bootloader 1.93 Olinex...
I am going to guess this is upgraded... lol
MuDvAyNeX said:
it now says in the bootloader 1.93 Olinex...
I am going to guess this is upgraded... lol
Click to expand...
Click to collapse
Great, glad it's sorted, I was gonna say I don't have much experience with Vista (an' I don't want to )
I'm sure that I've read that there can be issues with the Vista device center(sic), A quick search of XDA-Dev will help.
If you want to eliminate the PC <-> Ignito pitfalls maybe try Suillers method of upgrading direct from the device Internal Storage.
Kim
Three questions
MY computer has vista so it has no active sync
also my diamond is ****ed all the sudden it got stuck on the screen where it says windows mobile
so how can i install one of the rom that you guys made
but my phone doesnt actually start and y computer doesnt have active sync
so how can i install a rom on my diamond
does any one know???
i really need help guys thanksss alot
i didnt even download or any thing on my phone
it just stopped working suddenly
when i turn it on
first its the touch diamond screen then bell screen and then green sscreen saying windows mobile and it gets stuck there
also i cant hard reset it
i have tried every thing in the worlddddddd
vol down and enter both at same time then reset it then took the pin out kept my fingeres on bol down and enter key and it just goes to touch diamond screen the first one doesnt hard reset
Problems, problems, problems....
Firstly, Windows Vista does have ActiveSync... it's just 'under the skin' of Windows Mobile Device Centre.
If, as you say "It just stopped working" and you haven't done anything, the obvious answer is to get it replaced or repaired under warranty. The Diamond only came out last May, so none of our devices are out of the one year warranty period.
What's more likely is that you've tried to flash a ROM to your device without reading and understanding how to go about it. Either way, you need to search the 'Diamond ROM development' forum... you will definitely find an answer there.
Just one more thing, without trying to give you a lecture (which I often end up doing without intension ), you'll get a better response from the forum users if you keep your posts short and 'to the point'. Asking a load of questions all at the same time just puts people off wanting to help... very time consuming is this!
I appologise for the rant, I really am trying to help
I need help with connection, pc not recognition ppc, I was try lot of advices, but noting happend. I use Windows XP SP2 and I have HTC HD Win 6.1. I wish change SPL from SD card, but I can not find solution. Thanks for any help.
Read this - http://forum.xda-developers.com/showthread.php?t=505377
You may also need to update your usb drivers - follow this thread - http://forum.xda-developers.com/showthread.php?t=524619
You can't update spl via sd card to my knowledge, this has to be done via usb.
Nothing
I was try, but nothing, I will try to explain, sometimes whan I connected HD everything is ok, about 10 or 15 seconds, after that disconnected. I try unpluged and pluged again, but nothing happened. If I wait some time, again 10 or 15 seconds is ok and again disconnect.
My English is not good, but I try to find help.
So to confirm, you have changed your usb drivers as explained in the thread I referred you to?
If so, you can try to reinstall ActiveSync.
...
I was reinstal windows xp and nothing happened. When I wait 10 minutes and try again I have cinnection only 10 seconds, if I unpluged cabl and pluged again nothing happened, but if I wait 10 minutes and try show me connection 10 seconds.
And again I ask, did you replace your usb drivers using the link I gave above.
I will send HTC in service, thank you for help.
You still haven't answered my question and now you want to send the device in. Why send it in for service if you haven't even tried to fix it or if you don't know what the problem is?
Did you try replacing the usb drivers on your pc according to the link I gave you? Do you perhaps not understand what I'm asking?
As ClydeB1 stated above your issue is probably easily solved and maybe no need to leave it back to HTC for service, but you need to try the suggestions made by people first.
There is a number of reasons why your pc wouldn't pick up your HD. One as provided by ClydeB1 is that your usb drivers aren't correct and would need updating by following this guide.
You could also make sure that 'allow usb connections' is turned on in activesync connection settings.
Let us know if you have tried these and then we can offer more suggestions
Ta
Rick
Yes I was replace drivers, And I have one more problem with HTC, last night when I try turn on HTC nothing show on display, only black screen, I try about 10 times and I successful turn on HTC, HTC working about 5 minutes and when I look display is black, I try 100 times turned on but nothing, I think the best way to send my HTC in service. I am very disappointed in HTC, my HTC was working only 5 months, I think 10 hours of conference. (When I press power button, display is black, but I hear sound when HTC power on), HTC working but display is black, like the HTC extinct.
I took out the battery and waited about 2 hours and tried again to start the HTC and successfully started, then I did the clear storage and again refused to start again, I took out the battery and waited 2 hours and then started again, HTC, now he works, but not know whether to USB connection,I will try later. I do not know what is happening with my HTC.
The camera also will not start.
Hello All Expertz,
My 02 xdaIIs was dead while upgrading ROM.It was struck at 23 % and i was forced to disconnect.Now it is not showing any screesn even in full charged battery.I soft reseted but not working ITS DEAD.Can anyone pls help????
Thanks in Advance
MT
Milesht said:
Hello All Expertz,
My 02 xdaIIs was dead while upgrading ROM.It was struck at 23 % and i was forced to disconnect.Now it is not showing any screesn even in full charged battery.I soft reseted but not working ITS DEAD.Can anyone pls help????
Thanks in Advance
MT
Click to expand...
Click to collapse
Can you put it in bootloader mode? (white screen with the word "Serial" or USB and "v2.0x")
No..not able to put in bootloader mode.i tried to put in by pressing power+record+soft reset nothing happened.Only response i get is when i put in cradle for charging it shows a red light.pls help
in that case you should remove the battery and charge it in the back of the cradle (needs AC power supply, usb alone doesn't work). it might also show red at first, meaning the battery is completely dead now, but shortly after that, it will turn orange. if, during the charging process, it should turn red again, your battery is probably broken. maybe the battery dying was the reason your upgrade failed in the first place. i had a similar issue when i first tried upgrading in vista several years ago (before i came here). i removed the device from the cradle and it was still in bootloader mode. normally you should let the device stay in bootloader mode and just start flashing again. i didn't do it and neither did you, so all you can do is try everything to get it into bootloader mode again.
try everything you can do with the device at the moment:
- insert the battery, try bootloader
- reset, try bootloader
- power+reset, try bootloader
- battery out, battery in again...
eventually you will get the device back into bootloader mode and can try flashing it again. but before the next attempt to flash it, you should find out, what caused the error in your last upgrade to make sure, it does not happen again.
Milesht said:
No..not able to put in bootloader mode.i tried to put in by pressing power+record+soft reset nothing happened.Only response i get is when i put in cradle for charging it shows a red light.pls help
Click to expand...
Click to collapse
Chef is correct. The battery will not charge if it is on the device. Luckily for us, the BA cradle has the charging slot in the back for the "extra" battery. I would (regardless if it is dead or not) just buy a new battery on e-bay (they are dirt cheap nowadays) simply to rule out the possibility of the battery being dead, which as chef suggested might be the reason for the failure (especially if you cannot turn on the device).
Tony,
It worked lot of thanks.
1.Removed battery charged it.
2.Done hard reset(power+softreset)
3.Tried bootloader.IT WORKED .....
4.Flashed it with old stable wm6.1 rom.
IInd case.Finding the root cause.
After flashing I put that back again to the cradle.Then problem began BA went OFF.
Then I softreset and put again to the cradle before OS boots up Tried 3 times same result to make sure its cradle prob.
I take out frm the cradle
softreset the BA to boot.Now another problem.ITS not booting it reaches the FOUR COLOR SCREEN WITH RoM DETAILS then it FADES OUT with some markings(horizintal lines) here and there.
I waited for few minutes removed battery.Put it again then pressed power button got same results.
On the second attempt while locking the battery switch (pressing it up) That old RED LIGHT glows up.Then I pressed it down to unlock and removed battery.Then I tried again
This time it boots up and everything came to normal.(My HEART BEAT WENT DOWN) Thanked GOD.. And ofcourse you Tony.
Meanwhile I had given a small blow at the cradle and put my sweet Angel to cradle its working fine Now.
SO AM NOT SURE WHO IS THE real CULPRIT.. Battery,battery switch,or cradle?..
egzthunder,
I think battery is ok because I am getting the same backup just it was before..
So big THANKS to u two of you.
( I write this post frm my BA ) ;-)
Regards
Milesh James
egzthunder1 said:
Can you put it in bootloader mode? (white screen with the word "Serial" or USB and "v2.0x")
Click to expand...
Click to collapse
Hello,
I am facing the same problem on my xda iis showed on the screen only " Serial/USB v2.06"
I am really appreciated if you and someone can help me to solve the problem.
Many thanks for your kindness.
please don't double post, there was really no need to bump the other thread, since it is incredibly outdated and not helpful at all. being stuck at the serial v2.07 screen, the bootloader, you should try starting over from the very beginning, using the guide in my signature (if you are a windows xp user).