So with all the development with HardSPL for the p3600i i was wondering what is the correct technique to either backup the original SPL or extact it from the firmware from HTC Australia website (if possible).
Related
Hey Guys,
sorry, I´m searching the whole time after how to flash just an spl, for an extracting I used the NBH util.
My plan:
1) I want to flash my O2 branded Diamond, without flashing a hardSPL.
2) As I understood, it´s possible just to extract an SPL from the newest HTC rom, and flashing this with DiamondCustomRUU in the first step.
3) After this I should have the possibility to flash a full HTC Rom?
Are there any misunderstandings? because I can´t flash the extracted SPL with DiamondCustomRUU.exe.
What did I wrong, and what should I do?
Cheers, Chris
No one any idea???????????????????????
it might be possible to do this!
but you have to be careful not to get device ID/version different on both the OS or the SPL!
but why not just put hard spl and then revert back to stock SPL when you want to at a later stage! all versions of the stock SPL are availble on the rom developement forum
Hi I have a HTC not ORANGE, AT&T, Turkcell etc. TYTN2, which is German and it is not Cid locked.
I want to flash an original English ROM (RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar), is it necessary to run the HardSPL or can I just run the rom update utility.
Thanks.
Now don't quote me on this but I think if you're flashing an OEM rom from ATT to an ATT branded phone you don't neeed to update the spl. same is true for the HTC kaiser when flashing an official HTC rom. But, if you wanna flash an ATT Rom to your HTC kaiser, or vice versa, I believe you need to change the spl. Now I'm not 100% sure about this and hopefully one of the senior members can clarify this, but you could just play it safe and switch ot like jocky's 3.29 or 3.56 spl and not worry too much about it.
I really want to get a WM6.5 Rom on my TP2 however I want to make sure I'm able to send my device back to Vodafone if i need to make a warranty call. The problem is I can't find a Stock UK Vodafone Rom or SPL anywhere (Rom Version 1.14.161.5 (50207) WEE, Radio Version 3.44.25.27).
In actual fact I could get away without the Rom, but I really need the SPL!
Can anybody help?
The stock SPL is 0.79 see the Hard SPL thread for the re-locker.
The Stock ROM is on Vodafones website and the sticky post by udk.
Ta
Dave
after upgrading my rhodium from 6.1 to the official WM6.5, the SPL also change from 0.84 to 0.87.
i am now planning to flash hardspl then flash another cooked rom, and want to use the official WM6.5 as backup.
so does the 0.79 relocker still applicable to my phone if later i want to restore it for warranty reason?
or should I get a 0.87 relocker? (if so where can i get it?)
thanks alot for answering.
The .079 relocked should work if you re-flash a stock 6.1 ROM.
If you don't have one for your carrier you should still be OK. I'll enquire with cmonex about a 0.87 relocker.
Thread closed, could have been posted in one of many exsisting threads.
Dave
Hi there,
I want to recover my device to the stock SPL. I have tried to download the stock ROM from the HTC site but it says "Sorry this software is not suitable for the device." Is every WWE ROM the same? If so can I use a WWE ROM from any region?
Thanks
Hey,
What is your device model? It should look like "DIAM100", a 7 letter code. You can see it by removing the battery and looking somewhere near the type.
If you have a DIAM110, then you're pretty much screwed as HTC provides no ROMs for them. You might be able to find the original ROM somewhere here, but I'd be careful or you might end up like me - during the restore of my original ROM I got a "corrupted" error and am now stuck in a stalemate.
If you have warranty though, I would look for your original SPL (hopefully you recorded the version). For DIAM110 it was 1.93. Just make sure you DO NOT restore the SPL until everything else works well. If you screw up your OS and you have the stock SPL installed then you're stuck.
~codeslicer
My one is a DIAM100 and I'm running Olinex 1.40 unsigned with SatusROM 2.6. My original SPL is 1.93.
That is strange. So you went to the HTC Worldwide website and chose Touch Diamond? It should work... anyways I've seen a Hong Kong stock ROM here somewhere. But you can try checking here: http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades. If you need to return it for warranty though, you need to find the original SPL (hopefully you remember version). To install SPL, you need to use Jump SPL (on this site).
~codeslicer