Related
Hey,
I got some problems(aside from those). i just bought the dopod housing for my cingular 8125 because my old housing was cracked in alot of places. did the whole swap no issues and afterwards i cant seem to get a radio signal. now for anyone who hasn't looked yet there is a strip that is located under the antenna cover that connects to the antenna pins and that (as far as i can see) is touching fine. during the swap i did not touch the antenna itself.
now before anyone thinks it i'll go ahead and let you know i did go through the frustrating process of movign everything back to where it was but nothing changed. i also (on my other pc) am trying to reload the radio rom i was using before to see if that will change anything. so i guess for right now i'm kinda looking for anyone who has faced the same scenario and how they solved it, just incase his doesn't work.
oooooookkkkk.... a bit scared.
my phone just cut off and now wont cut back on.i reloaded the radio rom and it didn't fix anything. then all of a sudden while i was resyncing the damned thing just cut off... WTF!?!
then all of a sudden while i was resyncing the damned thing just cut off... WTF!?!
Click to expand...
Click to collapse
battery was charged to "full"?
yeah...
it was. the dmned thing has been F___ing wit me since yesterday.i even used my wife's MDA battery to test it and nothing. for the life of me i can't figure it out i tested the board to see if it shorted somewhere and it was good. i don't understand how it just messed up because i changed the housing?!? so what i might do is take it to the cingular store and have them use the more advanced tests and check it on the energy output to see what happened but if that don't work i might just upgrade my wife's contract(something i've been avoiding) and get the 8525(a hermes, i know) and start over.
but if worst comes to worst i have a question...which is better overall in size,function, and ease of modification? is it the hermes, the titan or the wizard?
in response to your pm...
take the device apart again,clean all the boards and the cables ends[use alcohol only in the cables ends,use a make-up brush to clean the boards cranys etc]...put it back together again very carefully....also do not overtigh the screws or undertigh...good luck....
as for your question above the best device to customize now is the hermes....but i would wait for the hermes II
REGARDS
Be careful with the static!! It may easily kill some IC's!!
There's a reason why the Service Manuals show pictures of people handling phones with gloves... (amongst other equipment)
cheers
mestrini said:
Be careful with the static!! It may easily kill some IC's!!
There's a reason why the Service Manuals show pictures of people handling phones with gloves... (amongst other equipment)
cheers
Click to expand...
Click to collapse
good point..forgot that...
i doubt it cause...
i used a wrist static dispencer, trust i know better than to go without one....the user name actually discribes me
Wat R Tha Odds...
alright folks here's the skinny. my 8125 fried, aparently somehow i had enough static to discharge and kill my IC ( yes you guys were right and i thank you for it) and now i guess one option available to me is to get the board replaced (firstly aquiring some static resistant gloves ) does anyone have an idea on where to go for a new board or a good condition used one and roughly the dent to pocket it would be?
ok, couple of things...
Been doing some HW and have a question... just to make sure is the cingular 8525 hermes or titan, or is it that the hermes IS in fact the titan? if someone could answer that in definate it would greately be appreciated. And secondly seeing i decided to get the 8525 not being able to find a motherboard i am selling my 8125. please see the post "BUY/SELL a broken Wizard! Protect our dying breed" for details.
A hermes is a Tytn and a Titan is a different HTC phone. A little confusing, but they are spelled differently.
alright....class summary
so the Cingular 8525 is a hermes, which is a tytn(am i good so far?) which is totally different from the TITAN. SO i need to start reading and studying the tytn and not the titan. Gotcha....i think?
Lol yep, I think. I have a kaiser that should be on it's way to me any day now and it's a Tytn II, but not a Titan II or even a hermes II.
Thanks to my recent stupidity I just had the idea to make a thread that we might share some of our ridiculously stupid mistakes that we later found out could have been solved by simply thinking things through.
Hopefully this'll help new owners of the phone avoid our mistakes.
My mistake just happened 10 minutes ago, and I'm rather annoyed it happened... oh well... another 4 hours of setting up my Kaiser won't kill me...
Anyway, I refuse to carry my Kaiser with me until it is properly protected in its case, so it's just been sitting here around the house while I tamper with it and wait for my case to get here. Consequently, I'm using 2 phones, and I swap the sim card between them.
I turned on my Kaiser and got scared pantsless. It would only stay on for a few seconds, and then turn off. Of course it scared the heck out of me... the phone is only 4 days old. So after soft resetting failed, I resorted to the hard reset... well, apparently something got turned off when I flashed dutty's rom to the phone, and the little screen that reminds you about the sim door being unlocked doesn't come up.
So it turns out my phone was turning off just because the sim door wasn't locked... and now I have the task of installing and re-configuring everything I had on the Kaiser... which I'm about to start now. 4 hours of repeating history here I come!
My buddy threw up all over mine at a party.. luckily it cleaned up nicely!
So the dumbest thing i've done with it, is leave it somewhere other than my pocket? lol
Believing the hype !!! and getting one. Well maybe. Because this is one "son of a ***** " phone to get working
Bought one. No video drivers FTL.
Besides that....nothing really. just being clueless on how to flash a ROM I guess even though I want to return it because of video drivers!! I DONT KNOW WHAT TO DO....
Dropped mine (and did not notice) while running across a busy street in downtown Calgary.
It was consequently run over by at least 1 car! I lost the back case, the battery was all banged up, and the power button was permanently pushed in, but guess what....it still turned on and I could make calls!!!!
Anyway, with no insurance, I thought I was up a creek with no paddle. AT&T hooked me up with a new one at 1/2 cost. I guess they heard the pain in my voice when I explained what happened.
last week end i made the stupid mistake of making an infinite loop on my today screen.
i was messing around trying to find a way to hide the VitoFindMe text at the bottom of my today screen, and since SPB Pocket plus (for some reason) didn't hold the plugin, i tried PocketBreeze, it put it in and it worked. so i put PocketPlus as a tab in it also just to get it to how i like, but it didnt allow me to put a personal tab as the default and i didnt need all of the extras, so i turned it off and put SPB back on the today. I decided to try one more time to put FindMe in SPB before i gave up, but i accidentally put PocketBreeze in it, and since PocketBreeze had SPB in it, it basically looped, froze and stopped on trying to boot when reset... so now i had to hard reset and i had to go through the task of putting all of my programs and stuff back on!
Yey what fun.
I bricked mine
ericc191 said:
My buddy threw up all over mine at a party.. luckily it cleaned up nicely!
So the dumbest thing i've done with it, is leave it somewhere other than my pocket? lol
Click to expand...
Click to collapse
Wow. My friend would have had to die after that one
tyeo098 said:
I bricked mine
Click to expand...
Click to collapse
how?!?!
RLoD very simple
I picked it up to check if SK Tools had finished cleaning ....................
while making whoopie with the ole' lady. Yeah, I got slapped upside the head with my Tilt & no more nookie for 2-weeks.
& boy, does she hate Lori now. (That's my Tilt name because I like the slightly *****y tone of Lori TomTom's voice)
Pwnt !
I accidentally locked my SIM card tryin to set up my keypad lock everytime u take the phone out of sleep mode. I was scared ****less. I could barley even hold the stylus in my hand to try and fix. basically, i had to log in to my wireless account on at&t, found my PUK code and everything was straight after that.
When I first got my Tilt, I kept it plugged in, since I have heard you should fully charge when you first get it. Well, I went to sync it, and it simply would not sync at all. I unplugged it, and replugged it. Still nothing. I checked all cables. Everything was properly hooked up on PC and ppc.
I was so mad, because it just would not work. So, I called ATT tech support. They made me soft reset, hard reset etc.
Finally they said, phone must be broken, they would exchange it for me. While I was waiting for her to do the exchange request (or whatever you call it), I just happened to notice that I had it plugged into the WALL charger, NOT the usb on computer (both cables were sitting right next to each other).
OMG, I felt so dumb, I hung up on AT&T, and had quite a chuckle at my stupidity
hmm, the dumbest thing I done that has to do with my kaiser?
I bought it!
Poetique said:
Thanks to my recent stupidity I just had the idea to make a thread that we might share some of our ridiculously stupid mistakes that we later found out could have been solved by simply thinking things through.
Hopefully this'll help new owners of the phone avoid our mistakes.
My mistake just happened 10 minutes ago, and I'm rather annoyed it happened... oh well... another 4 hours of setting up my Kaiser won't kill me...
Anyway, I refuse to carry my Kaiser with me until it is properly protected in its case, so it's just been sitting here around the house while I tamper with it and wait for my case to get here. Consequently, I'm using 2 phones, and I swap the sim card between them.
I turned on my Kaiser and got scared pantsless. It would only stay on for a few seconds, and then turn off. Of course it scared the heck out of me... the phone is only 4 days old. So after soft resetting failed, I resorted to the hard reset... well, apparently something got turned off when I flashed dutty's rom to the phone, and the little screen that reminds you about the sim door being unlocked doesn't come up.
So it turns out my phone was turning off just because the sim door wasn't locked... and now I have the task of installing and re-configuring everything I had on the Kaiser... which I'm about to start now. 4 hours of repeating history here I come!
Click to expand...
Click to collapse
At first I thought the dumb thing was refusing to carry your phone without a case.
Dumbest thing I did was using it while walking fast inside best buy. I dropped it and happend to land on the toe of my shoes while I happen to take a step. I kicked it about 30-40 feet accross the floor. The phone, battery, and the cover all went 3 directions. Luckily the floor was carpet. No scratches on the phone, reboot still works fine. I WAS PISSED.
People keep saying buying it is the dumbest thing they did but it's not. Keeping it beyond 30 days is the dumbest thing. If you bought it, own it, be proud. If you felt that buying the tilt is the worst mistake you've ever made, you should have returned it within the return period. There are other people from CDMA carriers wish they can get the Tilt.
I gave my phone to my Girl friend for a day (DUMB !!!!)
Now I neednt explain what happens when phones go into women's hands
she dropped it from the 3rd floor in her hostel
luckily I got it replaced (rich girlfriend's dads )
GSLEON3 said:
I picked it up to check if SK Tools had finished cleaning ....................
while making whoopie with the ole' lady. Yeah, I got slapped upside the head with my Tilt & no more nookie for 2-weeks.
& boy, does she hate Lori now. (That's my Tilt name because I like the slightly *****y tone of Lori TomTom's voice)
Click to expand...
Click to collapse
I know what you are talking about.
My dumbest thing was to give the kaiser to my girlfriend to play with it. She loves the bubble breaking game, and now everytime I am with her she is playing the f**king game.
Hi All
Spent awhile searching the forums (and the web) but couldn't find any relevant answers -- so here goes & apologies if it has been up before...
My TyTN2 got rain on the screen a few days ago (about 15-20 drops) and since then the touch part of the screen no longer works. The phone itself works perfectly, the screen displays everything as it should, but no touch.
Could a few raindrops do this?
I have a Hermes/TyTN 'lying around', anyone know if the screens are the same/compatible, was about to start searching for part numbers etc. but thought I'd ask the question anyway.
Any help, answers, pointers or links would be appreciated.
TIA
You could always buy a new touch screen.
I saw one at dealextreme.com for 4.99 , probably not the best quality but you can always give it a try for that price
sku.14919
cnn.cn also has the part , but only in combo with the actual lcd screen.
Thanks RacerII -- will check it out..
Had a similar issue with the touch screen dying after an os crash the other night n thought it was dead. Did a hard reset and reflashed and everything worked just fine. Try the hard reset and reflash first before you think about any repair options
@kaalgoosy
Thanks for the reply -- did a hard reset as you suggested, no change -- about to try a reflash -- currently using L26's B1 ROM, have dl'd B4 and will give that a whirl -- only problem seems to be I have to bypass the Welcome/Screen Alignment section (no touchscreen!) and Activesync seems to be lacking/missing/not working -- so can only try the SD method -- just reading up on that now
ROM update made no difference (wasn't holding my breath anyway...)
Looks like a screen replacement, after looking at the potential difficulties separating the digitiser from the LCD, decided a straight LCD replacement is my best option -- have found a place that will supply it (London UK) for £30 + p&p -- anyone know of a better (read cheaper) supplier?
Intending to use Mike Channon's guide to replace it myself...
no few drops of rain wont cause that damage...
most new PDAs and new gadgets in general including cams, portable ps... etc has a elements of water resistant+shock resistant and even an anti-magnetic field absorbtion (or something like) to reduce interference with other devices...
blackfoot said:
My TyTN2 got rain on the screen a few days ago (about 15-20 drops) and since then the touch part of the screen no longer works. The phone itself works perfectly, the screen displays everything as it should, but no touch.
Click to expand...
Click to collapse
there must be another reason cuz first sign of water damage will be blurry display..
blackfoot said:
the screen displays everything as it should, but no touch.
Click to expand...
Click to collapse
get your phone inspected by a professional technician especially if under warranty (dont tell them it was affected by rain drops.. they wont know) it might not be a very fair thing to say but again who said life is fair
blackfoot said:
ROM update made no difference (wasn't holding my breath anyway...)
Looks like a screen replacement, after looking at the potential difficulties separating the digitiser from the LCD, decided a straight LCD replacement is my best option -- have found a place that will supply it (London UK) for £30 + p&p -- anyone know of a better (read cheaper) supplier?
Intending to use Mike Channon's guide to replace it myself...
Click to expand...
Click to collapse
Have you got a web address for the London supplier? I think my screen may be on the way out.
Good luck with the replacement.
@jahrami -- was using the Kaiser's camera to take some photos for my daughter, it started raining while I was taking the last couple. 15-20 drops or so (as I said). Dabbed this off with kitchen roll, put the phone away. Got home a little later, tried to use the phone, no touch -- played around, soft reset etc etc, but nothing.
The rain is the only thing that has happened to it -- the display is perfect, phone itself works perfectly, have hard-reset, reflashed ROM, still no touch control... and while in theory I agree with you that a few drops of rain _shouldn't_ cause this sort of damage, it seems it has. Checked the water damage strip behind the battery, it's white, assume this goes pink/blue or WHY when exposed to real amounts of water.
Sadly, warranty is out (by 1 month) & the local phone shops want £40 to strip it and look... £32 for a screen? I'll do it myself -- if it doesn't fix it, back to the Eten M700...
@ach2 -- tried to put a complete & direct link to the item, message box wouldn't accept it (very long url). This company sells on ebay too, slightly cheaper (27.99 +p&p) and under various other site names, feedback is positive and screens are new. Can't comment on the company personally, unless you wait for a week. Thanks for the good wishes, will probably need them.
http://www.sparepartsformobiles.com search for Kaiser LCD replacement.
OP:
Before you buy anything for 27 quid: Note that there are 2 elements to that screen, as was mentioned (but maybe not quite clear) in post 2. There is the actual screen, which is a liquid crystal screen with thin film transistors with a glass plate on top, but on top of that is a digitizer. The digitizer is literally 2 sheets of slightly conductive plastic put together to assess where the stylus (or your finger) is currently touching it.
The digitizer shouldn't cost you more than about 5-10 quid. The full screen is going to cost you about 30 quid. You definitely don't need a new screen.
I've replaced 2 digitizers and 1 full screen on my HTC magician (I'm very good at smashing it into things) and after I broke it again, I bought a used HTC tilt cause I felt that an upgrade was in order. I ordered the digitizers for the magician and the screens from a generic eBay store in Hong Kong, it arrived the US (Boston) after about 2 weeks, I would expect Old Blighty to be similar.
Greetings from "New" England.
lncdoc
One more suggestion for you: have you considered using a virtual mouse cursor program? Maybe VirtuaMouse One-Hand?
Of course it won't actually "fix" your screen, but at least you'll be able to tap around your PPC until you fix the touch panel itself.
i will agree with such a temporarily fix, use a combination of virtual mouse
and voice commander and hotkeys shortcuts to navigate through your phone
look for second hand screen, there must be some around dude
EGMine said:
One more suggestion for you: have you considered using a virtual mouse cursor program? Maybe VirtuaMouse One-Hand?
Of course it won't actually "fix" your screen, but at least you'll be able to tap around your PPC until you fix the touch panel itself.
Click to expand...
Click to collapse
blackfoot said:
Looks like a screen replacement, after looking at the potential difficulties separating the digitiser from the LCD, decided a straight LCD replacement is my best option
Click to expand...
Click to collapse
@incdoc -- Greetings to you too, cousin -- yes I do realise the screen has a separate digitiser (see quote above from earlier post), and in fact, the same supplier has digitisers for £8 but after reading about the difficulties of separating the digitiser from the LCD thought I would save time, effort and money by replacing the LCD in its entirety. I can always play with the older one afterwards, and if I successfully split them will get a touch screen and keep the thing as a spare, which seems like a good idea, as there are now several more posts regarding the same or similar issues to mine, just within the last few days.
Are you suggesting that separation _isn't_ difficult?
@EGMine -- have to say that I haven't heard of VirtuaMouse One-Hand, will look it up -- thanks for the suggestion.
Jahrami -- thanks for the suggestion, about to check VirtuaMouse and completely forgot about Voice Commander, just changed my ROM to L26's B4, (after fault developed) so haven't set the phone up, yet -- but definitely will set up some voice tags.
Big thank you (for telling me something I should have thought of myself -- age really is a bummer!)
Edit** Dl'd trial of VirtuaMouse, good idea -- hard work! Combination of Voice Tags and scroll wheel much better. Eten M700 back in cupboard. ;-))
Dammit, dammit and dammit!
In the interest of rounding things off -- thought I'd post this to (almost) end my (little) epic.
Bought a replacement screen from the source listed above, £32, web price was lower with free shipping, but phoned the order through to get a quicker delivery. Arrived the next day, exactly as ordered. (Bravo!) No tools included, but I have some anyway.
Used Mike Channons guide to replacement (no mention of the sticky keyboard hinge 'finisher' anywhere BTW), all went as planned. Total time to replace about 1hr 15mins. (Not rushing)
Screen kicked in, onto alignment and yippee! -- touch working again!
Knew I shouldn't have had that celebratory cup of tea! -- put SIM in, followed by SD card, phone no longer recognises the SIM. Bu**er!
Stripped the phone again (impressed myself, took less than 10 minutes), checked to see if the SIM ribbon had popped off -- seemed ok, but popped it and reseated it anyway. Reassembled the phone, popped in the SIM -- Bu**er again.
Stripped the phone again (4 minutes -- not bad eh?), checked the SIM connection to the keypad PCB and 2 of the contacts in the socket look slightly mangled.
At this point now I'm wishing I'd gone for the £70 repair option, it's 20 to 1 in the morning (12:40 am to you), the eyes are a little fuzzy and I (once again) have a TyTNII 'kit' in front of me.
Oh well, there's always tomorrow -- now where did I put my Eten M700?
EDIT** Forgot to add a request, if anyone has a TyTNII in bits and wants to sell the keypad PCB, leave info or PM. Thanks.
EDIT 2** Oh well, seems like I _have_ kiboshed the SIM socket on the keypad PCB -- so hoping someone has one (keypad PCB or TyTNII) lying around will sell for bits?
hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
eyetac said:
hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
Click to expand...
Click to collapse
...sounds like a hardware issue!
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
eyetac said:
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
Click to expand...
Click to collapse
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
http://www.youtube.com/watch?v=5-IUzerAT0s
exactly what mine does
even right after a screen re-align
sigh
cyron_at said:
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
Click to expand...
Click to collapse
ok, thanks dude
will take it in and hopefully get a replacement
another example of what mine is doing pretty much to the T
http://www.youtube.com/watch?v=ZhQIyqnTkS4&feature=user
if anyone may have a solution.. please let me know asap.. as i will try taking it in on saturday
thanks guys
damn, mine does the same from time to time!
does anybody have a solution?
did a replacement fix the problem?
unfortunately i havnt had a chance to take it in yet, but i have logged the problem with my service provider..
the problem occurs alot more when i used panosha's rom/s
with the default (and now alphazero) the problem seems less frequent, but definitely still happens..
happened badly yesterday when i used gps to get my girlfriend to a casting, but switched on car A/C and after 5 minutes it was cool again *shrug*
its really annoying though
will let u know when i finally get to taking it in, unless u get there first
Hi there, I have the exactly problem what you had. Whenever the machine is hot, it becomes mad. Any solution could be reslove the problem?
It really sounds like a hardware issue... When you return the phone to the store please flash back to the original stock rom (for warranty purposes )
same problem
i am getting he same alignment problem.i do it many times a day but still tapping somewhere on screen taps the other way.very difficult to dial phone numbers
cyron_at said:
...sounds like a hardware issue!
Click to expand...
Click to collapse
i dont think its an hardware issue,as after i align it works fine for few hours and then i have to align again to make the taps work acurately.........i have heard there is a cab file for it.if any one can post it here.........................or make a cab file so that clicking it makes the alignment as it was default with the new phone
It is a hardware issue. the screen somehow (usually when carried in front pants pocket) will get pressed and SHIFTED. Then screen pushes against the side-cover and this fools the touch-sensitivity of the screen. Try yourself - try to shift screen to one or other side, and directly after it will be better. it's still a service matter though. Send it for repair.
This is a known issue. You need to exchange the unit for a new one.
hey guys...
so late last year i took the phone in and it spent 3 weeks at leaf (HTC distributer here is south africa)
i got the phone back, turned it on in the store.. and guess what... still screwed..
i threw my toys to say the least and got a brand new phone..
the new phone was 110% up until 2 weeks ago..
it started doing the same damn thing (to a lesser extent)
i have found that its a connection problem..
the touch pad is very all over the place if used normally (so basically its unusable)
but if i hold down the top left of the phone(pushing down just above the start menu) with my left hand and use my fingers on my right.. the phone works perfectly again..
does anyone know how to fix this?
its so frustrating, especially knowing im going to be without it for 3 weeks or more again
hmmm ...
i heard that the radio-part is for managing the curcuits.
try an other rom.
but i cant give garanty, i hard it only.
Hi all,
recently one of my Kaisers died, still got one left though. It made me wonder:
- Is your device still alive?
- Who is using it as their daily device?
Use the poll and post your story :victory:
(And tell us what rom you are running)
My SIM slot doesn't work. I actually, don't have any working device working right now... I was using Android but it just got too much corruption and I was too lazy to do the partitions again, so I just installed some WinMo ROM.
Yep mines still going strong... Love it.... is my Work phone... Have 4 spare batteries so when away for long periods it is a god send... Not the fastest phone around but damn reliable!!!! Tried Android on it but never managed to get a decent FULL hardware working version on it... so went back to just winmo...
even have a spare waiting in the wings when current one died. LOL
battery replacement needed
Amazingly, even though my touchscreen died, the rest of the phone is working. I am using keyboard-kung-fu to navigate.
My battery is about to die/explode, it has expanded so much that the rear cover literally can not be closed properly.
I ordered a replacement from a local shop, and when it arrived, it was DOA because the stock was TOO OLD!! CRAZY!
I currently use my phone as a 3G modem (connected to my LAN router via USB)
Does anyone have any suggestions on home-making a replacement battery?
I have tried:
1) wiring up the + and - lines from a 3.7v LiIon notebook cell (device won't power on, but the green LED flashes if i hold down the power button). (Size does not matter - the phone sits on a windowsill)
2) wiring up a battery from an HTC Touch HD (only 3 connectors, not 4) -- same situation as #1
3) bought a replacement battery - new old stock from HTC - and it was DOA
4) bought a replacement battery - from some other manufacturer but I don't remember the name -- same deal, DOA
Is there any way to wire up any other battery? Size doesn't matter-- anything with compatible wiring will be OK with me.
Any suggestions?
of course!
it was last time i looked about 2 months ago
now ive seen this thread i will have to check again once i get home.
it was dropped several times. had the case replaced twice - the whole phone casing i mean.
first time was just because it looked a bit tatty
second time was after i dropped it while reading the gps on my mountain bike (yeah i know, not the cleverest thing ive ever done), i was crashed on the deck and could see my bike sliding one way and the phone another on its front side must have been one of the very few times that i was on my bike without the aluminium case and safety line
it would still look like new if my wife hadnt dropped it on the pavement, only minor scratches that time...
i still remember when i used to show it to people and they were impressed with the bright touch screen,
then i would slide the case open using the mario sound and the keyboard would light up and they were really amazed
happy days eh?
I use mine like an iPod now (kinda). I go to youtube and do web browsing
I use mine almost daily, on my second network on which i have an unlimited data plan. I flashed it with scoot's cyanogenmood 7*, in order to keep it working better than with winmo .
Kaiser
I still use it weekly. Winmo 6.5. I still like the simple ability to click on a phone number in an email and go straight to the dialler without copy and paste.
mrg2003 said:
I still like the simple ability to click on a phone number in an email and go straight to the dialler without copy and paste.
Click to expand...
Click to collapse
Android does that.
I pulled mine out of its box in the basement after it had sat there since Aug. 16, 2010 (based upon the last text message date), and not only did it accept a charge, but it booted right up. It's sitting on my desk right now while I cycle the battery a couple of times before deciding exactly what to do with it.
Windows Mobile Rocks!!!!
I still use mine everyday for calling texting and browsing it's not superfast but it is still better than any of them fisher-price apples.
@mfsr98: how do you make an i-pod out of a windows device? Did you blend it? or did you ran over it with your truck?
osvikvi said:
Windows Mobile Rocks!!!!
I still use mine everyday for calling texting and browsing it's not superfast but it is still better than any of them fisher-price apples.
@mfsr98: how do you make an i-pod out of a windows device? Did you blend it? or did you ran over it with your truck?
Click to expand...
Click to collapse
Yeah... Well I just go to YouTube and browse the web it.
Sent from my Galaxy Nexus using xda app-developers app