Microsoft Voice Command 1.6 German on Diamond works!!! - Touch Diamond, MDA Compact IV General

Tryed to install MSVC 1.6 on my Diamond and was frustrated that it wouldn't work...
so I played around and got it - even with bluetooth headset...
How I did it?
- Made a hard reset to clean up all my played settings...
- Installed Microsoft Voice Command DE PPC 1.60 for M2M.PPC420_StrongARM.CAB from anywhere in internal memory even with errors...
- got MSVC_US_PPC 1.6.19209.bengalih.CAB from anywhere and extracted
VOICECMD.015 to voicecmd.exe and 0VCBTHAG.013 to vcbthag.dll
- replaced that files in Diamonds \Programme\Voice Command
- Created a ShortCut of \Programme\Voice Command\VoiceCmd.exe to "Startmenue"
- Assigned Key1 to VoiceCmd
- set HKLM\Software\Microsoft\Bluetooth\AudioGateWay -> SupportCLI to 1
- set HKLM\Software\OEM\VoiceCommand -> VoiceCmdEnable to 1
- Made a Softreset
- Paired My Bluetooth Device
and voila - everything works like a charme...
Tom

Is it possible to activate the hardware button (home) ?

Hi all,
No problem with the french MSVC 1.6 version
@Fabliv : by default, you can launch it with the Call button (long press)
but I think you could use tommat's trick (shortcut) to activate it with the Home button...

No - not even with spb, but U can use the phone button long pressed

I add that with the MSVC 1.6 standard version (not the extracted one), you don't have to do all these tweaks to make it works... just install the cab et voila !

even with the german version it wont work in standard...

seems that even with this trick you cannot activate the program with the button on the blutooth headset
you need to use the call button with a long push

i didn´t tweak anything, german version in a german rom works like a charme though, even with my jabra bluetooth when hardware button is set. Installation ended with an error message, dunno why...

I also have a original german rom but the recipe doesn't work
@tommatt:
When you say ...
Created a ShortCut of \Programme\Voice Command\VoiceCmd.exe to "Startmenue"
Click to expand...
Click to collapse
... do you mean "create a shortcut of \Programme\Voice Command\VoiceCmd.exe in folder \windows\Autostart\?
Well I did that. I even install a german version of voice commander I bought for €29,90. I didn't get it from "anywhere"
The prog simply doesn't show up when I long press the phone button. When I manually start the \Programme\Voice Command\VoiceCmd.exe then for 5sec a symbol is shown in the menuebar. But then it disappears.
What is the workaround for this? Do I have to patch to a different rom?
CAUSE: I want to call my contacts by using the voice. The build in program is ****. Does HTC really expect me to assign voices to all my contacts?

Thanks for the help it works also with cable headset. Does anybody know how to ad the cable headset button "long press" for voice command?
Thanks,
Snappy

If Only I could find anywhere!!!

modify MSVC present in ROM to speak/listen to German lg
hi folks,
I run dutty's 2.3a MSVC release on my phone (WWE). Could anyone point out what must be changed in registry and copied to \windows dir on the diamond to make mscv speak and recognize germany language?
I got the installation cab from the german release here, but think it would also work this way rather than written in the first post what does not work for me, cos msvc (the current build like 19719) is part of my rom and NOT installed to program files but to \windows.
Thanks for your help
regards,
Pat

MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!

mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Here you have all the links where you can buy it:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/about-voice-command.mspx
TDO

Snappy said:
Thanks for the help it works also with cable headset. Does anybody know how to ad the cable headset button "long press" for voice command?
Thanks,
Snappy
Click to expand...
Click to collapse
this is what i want to know, can someone aswer to his question? (sry for my english)

For the no english men:
da mußt nix tun, geht automatisch. (Wenn nicht: 1.) Mülltonne öffnen, 2.) Gerät hineinschmeißen, 3.) Fertig)
oder Var. 2: vermutlich hast dein Gerät zu tode bespielt (verstellt), also dann rate ich als Test: 1.) Backup machen 2.) MSMC 1.60 Ger. cab installieren 3.) wenn errormeldung , einfach ignorieren (ist bekannter bug) 4.) Softreset -- Fertig
Good luck

Related

k-jam with new french rom plus ht820 works!!!!!!!

the only problem is i cant speak french! :lol:
is there a way to change the os to english without losing the new audio?
the bt does not have an icon for audio streaming but do have two tick boxes when pairing h/s
finaly can also control play/pause ff/rw from headphones
seriously? have u tried it? please someone make an english version of it!
still trying just installed tomtom but regedit is not something i will touch if i cant understand it
ps just test voice and is transfered to h/s
for anyone reading this, runing PHM regedit still displays the registry in english, so the gps change for tomtom bluetooth can be done.
last changes till tommorow,
dont like thetime on the today screen, prefer it on the top bar,
also now autolocks if left on after preset time the screen goes to lock display asking for password
Ok listen up, we need some help. Some people are working on a WWE version of this rom. But we need to have an image in .nba format.
Would someone be so kind to back this baby up using Awizard backup tools and put it on a server (contact me if you need some space!)
Thanx

BT activating Microsoft Voice rather than Voice Dialer

Just upgraded from the Blue Angel to Cingular's 8125 Wizard and I'm like a kid on his birthday. I especially like being able to initiate a phone call from my HS850 BT. Curious if someone has the registry settings to point to Microsoft Voice rather than Voice Dialer.
Thanks in advance!
Steven
WIZA100
ROM version 1.8.11.1 WMe
ROM date 11/24/05
Radio version 01.09.11
Protocol version 4.0.13.20
ExtROM version 1.8.11.103
Voice command activate via btooth
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Thank you SO much! Works flawlessly. Curious if anyone prefers the Smart Dialer rather MS Voice? It works so nice, even though sometimes it sounds like it's on helium....
Thanks again!
Man I just love this Wizard!
Steven
WIZA100
ROM version 1.8.11.1 WMe
ROM date 11/24/05
Radio version 01.09.11
Protocol version 4.0.13.20
ExtROM version 1.8.11.103
VoiceCommand is much better! To complete your wizard you need to get TomTom navigator 5 with the bluetooth gps receiver.
Found this regarding completely ripping out Cyberon Voice Dial...
http://www.beyondthetech.com/blogs/wm/2005/10/clearing_out_the_traces_of_voi.html
Re: Voice command activate via btooth
nmonger said:
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Click to expand...
Click to collapse
Will this work on the T-mobile MDA? How do you edit the registry?
Re: Voice command activate via btooth
tbrown801 said:
nmonger said:
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Click to expand...
Click to collapse
Will this work on the T-mobile MDA? How do you edit the registry?
Click to expand...
Click to collapse
Thanks this worked great. I can even listen to music on my bluetooth headset now.
Hi guys.
Oh yes... I sure would love to use my BT headset as well!!
So I changed the default value for the "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path" from "\Windows\SDDialer.exe" to "\Programme\Voice Command\VoiceCMD.exe" (I am using a german device) but it doesnt work. Anybody got this trick working on a Qtek 9000?
Thanks in advance!
Amen
msvc
where can I get a really chaep copy of voice command?
I tried this too and I can't get it work right. The BT button doesn't call voicecommand consistantly, and when it does, the synth speech from VC doesn't come through via the BT headset. Meaning If I say "Call Tony" I won't be able to hear VC's reply of "on Mobile or Home". This is annoying. I'm using US T-mo MDA Vario. Perhaps the path or the name isn't consistant across the board?
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?
adbo said:
I tried this too and I can't get it work right. The BT button doesn't call voicecommand consistantly, and when it does, the synth speech from VC doesn't come through via the BT headset. Meaning If I say "Call Tony" I won't be able to hear VC's reply of "on Mobile or Home". This is annoying. I'm using US T-mo MDA Vario. Perhaps the path or the name isn't consistant across the board?
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?
Click to expand...
Click to collapse
Did you also run the Registry Wizard tweak "Enable Bluetooth Receive". This is what allows the headset to receive the incoming sound from the Pocket PC. Also on my phone I have to tap my Bluetooth headset twice, but it is consisitent, and I can tell the Voice Command beep from the other tone.
Hi guys.
Looks like you need the right Bluetooth profile for this hack.
I first tried it with my old Sony Headset (HBH-30) using a "Headset" profile. I could use it for regular phone calls, but I was unable to place a call using Microsoft Voice Command. After this, I tried a Plantronics Bluetooth headset ("M2500 Mobile Headset") and this one came up with a profile called "free speech mechanism" ("Freisprechen" on my german device). This profile works like a charm; I only have to press and hold the call-button for a moment and MS Voice Command comes up.
The only frustrating thing is that the device has to be in "pda mode" to place a call using voice command. If I fold up my Qtekk 9000, it doesn't work; but at least I can use the headset in the car now.
Hope this helps
Amen
On my Cingular 8125 I didn't create any BT profile for Motorolla HS850. Typically I press the button 1 or 3 times slowly then I hear the VC response. With the 2.8.7.102 ROM the VC sounded like Tiny Tim but with this 2.16.9.101 it sounds like it's susposed to.
ROM version: 2.16.9.1 WWE
ROM date: 2/6/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.16.9.101
VOICE ENABLER< MS VOICE COMMAND
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Re: VOICE ENABLER< MS VOICE COMMAND
getho said:
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Click to expand...
Click to collapse
Hey my first post here!, tried this software just now, and works great. Easy to switch back when needed. thanks for the link.
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?[/quote]
what registry wizard did you use that allows enable recive
Did you also run the Registry Wizard tweak "Enable Bluetooth Receive". This is what allows the headset to receive the incoming sound from the Pocket PC. Also on my phone I have to tap my Bluetooth headset twice, but it is consisitent, and I can tell the Voice Command beep from the other tone.[/quote]
Re: VOICE ENABLER< MS VOICE COMMAND
kzaidi said:
getho said:
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Click to expand...
Click to collapse
Hey my first post here!, tried this software just now, and works great. Easy to switch back when needed. thanks for the link.
Click to expand...
Click to collapse
ok is it just me or is any one else haveing problems tring ot down load or register on this site
where can I get a really chaep copy of voice command?
Click to expand...
Click to collapse
You can get a really cheap version here
http://buzzdev.net/component/option,com_remository/Itemid,109/func,select/id,37/orderby,2/page,2/
Made a cab file on that registry
edmondt said:
Made a cab file on that registry
Click to expand...
Click to collapse
works well most of the time
there is a few times it does not link right but
still do not hear the incoming from the htc

ORANGE + Phonepad Nightmare!

Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny
me too
i have been asking about this too the last day or so. the dopod rom has it built in but i am worried that once i have put the dopod rom on then i cant go back to the orange one if i dont want to keep the phone.
No one seems to be replying about dumping my original orange rom so at the mo we are a bit stuffed.
warnysouth said:
Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny
Click to expand...
Click to collapse
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
It will work, u just need some hack
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi,
Great thank do I install this before or after phonepad?
Thanks
W
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W
warnysouth said:
Hi,
Great thank do I install this before or after phonepad?
Thanks
W
Click to expand...
Click to collapse
Install phonepad, then G4 SIP tweak, then select phonepad as startup SIP in G4 SIP Tweak, soft-reset. It works for me.
warnysouth said:
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W
Click to expand...
Click to collapse
WOOOOOOOOOOOOOOOOOOOOOOOOOHOOO PHONEPAD UP ON THE ORANGE! uninstall phonepad, install G4 tweak, install phonepad international, and bobs your uncle! THANK YOU VERY VERY VERY MUCH
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
Yeah I just did a fresh install of everthing and now it doesnt work again. Hmm it seems its not repeatable. yet.
Please can someone post links to the relevant files needed to do the above. Actually I see the G4 link above so just phonepad if poss.
Thanks
rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
How did you get it to work?
Cheers the G4 does the trick
thank you for the solution!! worked first time for me, installed the tweak then phone pad english and soft resetted. so glad to have phonepad back!
OK I got the G4 Sip program installed but the phonepad never works - just pops up the standard keyboard. I have a Orange M700 - any suggestions? Thanks
Uninstall both then install sip change, reinstall phone pad select phone pad as default and it should work...
Or if all else fails purchase SK tools as this always works and has many useful extra features.
Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol
Yet another hapless convert to smartphone
tattoo_gaz said:
Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol
Click to expand...
Click to collapse
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening
Awesome, this has been plaguing me for a long time, whatever i did i could not get any keyboard except the standard ones to stick and be useable, fine with a stylus, no good for one handed operation.
Now it all works and like the rest its a case of remove anything resembling SIP management and alternate SIPs and then install G4 Tweak and then Phone Pad, select PhonePad in the G4 interface and soft reset. Bingo a working phone pad.
Phone Pad
inanimateman said:
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening
Click to expand...
Click to collapse
I was in a similar position to you. I managed to get mine working eventually - I found that I didn't need Sip Change. I just installed SIP Tweak, then Phone Pad. I think perhaps the key thing is to soft reset immediately after selecting Phone Pad on Tweak. Once I'd done that it finally worked, and has continued to work even after when I've shut down normally.

tomtom 6 !?

Hi, is there anyone out that has tomtom 6 running on his phone???
i looked at the tomtom homepage and i don't really can find a clue how to manage this...
i have an tomtom bt gps receiver and from my tytn a tomtom6 installation...
once i had managed it that i starts like it should but on map selection i cant scroll... the joystick up/down just changes volume...
There are two version of TomTom, one for the PDA-phone (e.g. with touchscreen) and the other is for Smart-phone (e.g. without touchscreen). Make sure you've purchased the correct version.
You should install a touchscreen emulation.
http://rapidshare.com/files/24157817/TomTom_6.020_for_Windows_Mobile_Smartphone.rar.html
This one is the file you need. ++
thx...
where can i get such a touchscreen emu ???
and one other question...
how can i add voice tags to contacts???
ok thanks .. i see the fakecursor
but how can i map programm to key's ??? i miss a keymapper programm originaly implemented to this windowsmobile...
tytn has such app...
also i have problems with ms voicecommand for sp ... i can use the record buttong in settings but when pressing the original voicecommand app comes... ... where i don't know how to add voicecommand to contacts...

No Button1(hold) Missing

I just bought the HTC Diamond
ROM version: 1.93631.8 wwe
ROM date: 10/30/08
I tried to set up Voice Commander but when I go to SETTINGS > BUTTONS there are not buttons assigned.
How do I assign a button?
Please Help?
i am not sure whether i can help as i installed cyberon voice dialer but i guess they r pretty much the same.I had this problem of not showing button1 when i used a cab meant for kaiser i found out that 40c6 was missing which was actually meant for button1. i had attached a registry for u just install soft reset and u should see ur button1 in settings=>button .Hope it helps
kajtek01 said:
I just bought the HTC Diamond
ROM version: 1.93631.8 wwe
ROM date: 10/30/08
I tried to set up Voice Commander but when I go to SETTINGS > BUTTONS there are not buttons assigned.
How do I assign a button?
Please Help?
Click to expand...
Click to collapse
Hi,
I am having the same problem with Microsoft voice command. Did the registry changes helped you and how did you get it working? Thanks,
Best Regards

Categories

Resources