No Button1(hold) Missing - Touch Diamond, MDA Compact IV General

I just bought the HTC Diamond
ROM version: 1.93631.8 wwe
ROM date: 10/30/08
I tried to set up Voice Commander but when I go to SETTINGS > BUTTONS there are not buttons assigned.
How do I assign a button?
Please Help?

i am not sure whether i can help as i installed cyberon voice dialer but i guess they r pretty much the same.I had this problem of not showing button1 when i used a cab meant for kaiser i found out that 40c6 was missing which was actually meant for button1. i had attached a registry for u just install soft reset and u should see ur button1 in settings=>button .Hope it helps

kajtek01 said:
I just bought the HTC Diamond
ROM version: 1.93631.8 wwe
ROM date: 10/30/08
I tried to set up Voice Commander but when I go to SETTINGS > BUTTONS there are not buttons assigned.
How do I assign a button?
Please Help?
Click to expand...
Click to collapse
Hi,
I am having the same problem with Microsoft voice command. Did the registry changes helped you and how did you get it working? Thanks,
Best Regards

Related

BT activating Microsoft Voice rather than Voice Dialer

Just upgraded from the Blue Angel to Cingular's 8125 Wizard and I'm like a kid on his birthday. I especially like being able to initiate a phone call from my HS850 BT. Curious if someone has the registry settings to point to Microsoft Voice rather than Voice Dialer.
Thanks in advance!
Steven
WIZA100
ROM version 1.8.11.1 WMe
ROM date 11/24/05
Radio version 01.09.11
Protocol version 4.0.13.20
ExtROM version 1.8.11.103
Voice command activate via btooth
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Thank you SO much! Works flawlessly. Curious if anyone prefers the Smart Dialer rather MS Voice? It works so nice, even though sometimes it sounds like it's on helium....
Thanks again!
Man I just love this Wizard!
Steven
WIZA100
ROM version 1.8.11.1 WMe
ROM date 11/24/05
Radio version 01.09.11
Protocol version 4.0.13.20
ExtROM version 1.8.11.103
VoiceCommand is much better! To complete your wizard you need to get TomTom navigator 5 with the bluetooth gps receiver.
Found this regarding completely ripping out Cyberon Voice Dial...
http://www.beyondthetech.com/blogs/wm/2005/10/clearing_out_the_traces_of_voi.html
Re: Voice command activate via btooth
nmonger said:
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Click to expand...
Click to collapse
Will this work on the T-mobile MDA? How do you edit the registry?
Re: Voice command activate via btooth
tbrown801 said:
nmonger said:
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Click to expand...
Click to collapse
Will this work on the T-mobile MDA? How do you edit the registry?
Click to expand...
Click to collapse
Thanks this worked great. I can even listen to music on my bluetooth headset now.
Hi guys.
Oh yes... I sure would love to use my BT headset as well!!
So I changed the default value for the "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path" from "\Windows\SDDialer.exe" to "\Programme\Voice Command\VoiceCMD.exe" (I am using a german device) but it doesnt work. Anybody got this trick working on a Qtek 9000?
Thanks in advance!
Amen
msvc
where can I get a really chaep copy of voice command?
I tried this too and I can't get it work right. The BT button doesn't call voicecommand consistantly, and when it does, the synth speech from VC doesn't come through via the BT headset. Meaning If I say "Call Tony" I won't be able to hear VC's reply of "on Mobile or Home". This is annoying. I'm using US T-mo MDA Vario. Perhaps the path or the name isn't consistant across the board?
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?
adbo said:
I tried this too and I can't get it work right. The BT button doesn't call voicecommand consistantly, and when it does, the synth speech from VC doesn't come through via the BT headset. Meaning If I say "Call Tony" I won't be able to hear VC's reply of "on Mobile or Home". This is annoying. I'm using US T-mo MDA Vario. Perhaps the path or the name isn't consistant across the board?
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?
Click to expand...
Click to collapse
Did you also run the Registry Wizard tweak "Enable Bluetooth Receive". This is what allows the headset to receive the incoming sound from the Pocket PC. Also on my phone I have to tap my Bluetooth headset twice, but it is consisitent, and I can tell the Voice Command beep from the other tone.
Hi guys.
Looks like you need the right Bluetooth profile for this hack.
I first tried it with my old Sony Headset (HBH-30) using a "Headset" profile. I could use it for regular phone calls, but I was unable to place a call using Microsoft Voice Command. After this, I tried a Plantronics Bluetooth headset ("M2500 Mobile Headset") and this one came up with a profile called "free speech mechanism" ("Freisprechen" on my german device). This profile works like a charm; I only have to press and hold the call-button for a moment and MS Voice Command comes up.
The only frustrating thing is that the device has to be in "pda mode" to place a call using voice command. If I fold up my Qtekk 9000, it doesn't work; but at least I can use the headset in the car now.
Hope this helps
Amen
On my Cingular 8125 I didn't create any BT profile for Motorolla HS850. Typically I press the button 1 or 3 times slowly then I hear the VC response. With the 2.8.7.102 ROM the VC sounded like Tiny Tim but with this 2.16.9.101 it sounds like it's susposed to.
ROM version: 2.16.9.1 WWE
ROM date: 2/6/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.16.9.101
VOICE ENABLER< MS VOICE COMMAND
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Re: VOICE ENABLER< MS VOICE COMMAND
getho said:
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Click to expand...
Click to collapse
Hey my first post here!, tried this software just now, and works great. Easy to switch back when needed. thanks for the link.
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?[/quote]
what registry wizard did you use that allows enable recive
Did you also run the Registry Wizard tweak "Enable Bluetooth Receive". This is what allows the headset to receive the incoming sound from the Pocket PC. Also on my phone I have to tap my Bluetooth headset twice, but it is consisitent, and I can tell the Voice Command beep from the other tone.[/quote]
Re: VOICE ENABLER< MS VOICE COMMAND
kzaidi said:
getho said:
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Click to expand...
Click to collapse
Hey my first post here!, tried this software just now, and works great. Easy to switch back when needed. thanks for the link.
Click to expand...
Click to collapse
ok is it just me or is any one else haveing problems tring ot down load or register on this site
where can I get a really chaep copy of voice command?
Click to expand...
Click to collapse
You can get a really cheap version here
http://buzzdev.net/component/option,com_remository/Itemid,109/func,select/id,37/orderby,2/page,2/
Made a cab file on that registry
edmondt said:
Made a cab file on that registry
Click to expand...
Click to collapse
works well most of the time
there is a few times it does not link right but
still do not hear the incoming from the htc

Microsoft Voice Command 1.6 German on Diamond works!!!

Tryed to install MSVC 1.6 on my Diamond and was frustrated that it wouldn't work...
so I played around and got it - even with bluetooth headset...
How I did it?
- Made a hard reset to clean up all my played settings...
- Installed Microsoft Voice Command DE PPC 1.60 for M2M.PPC420_StrongARM.CAB from anywhere in internal memory even with errors...
- got MSVC_US_PPC 1.6.19209.bengalih.CAB from anywhere and extracted
VOICECMD.015 to voicecmd.exe and 0VCBTHAG.013 to vcbthag.dll
- replaced that files in Diamonds \Programme\Voice Command
- Created a ShortCut of \Programme\Voice Command\VoiceCmd.exe to "Startmenue"
- Assigned Key1 to VoiceCmd
- set HKLM\Software\Microsoft\Bluetooth\AudioGateWay -> SupportCLI to 1
- set HKLM\Software\OEM\VoiceCommand -> VoiceCmdEnable to 1
- Made a Softreset
- Paired My Bluetooth Device
and voila - everything works like a charme...
Tom
Is it possible to activate the hardware button (home) ?
Hi all,
No problem with the french MSVC 1.6 version
@Fabliv : by default, you can launch it with the Call button (long press)
but I think you could use tommat's trick (shortcut) to activate it with the Home button...
No - not even with spb, but U can use the phone button long pressed
I add that with the MSVC 1.6 standard version (not the extracted one), you don't have to do all these tweaks to make it works... just install the cab et voila !
even with the german version it wont work in standard...
seems that even with this trick you cannot activate the program with the button on the blutooth headset
you need to use the call button with a long push
i didn´t tweak anything, german version in a german rom works like a charme though, even with my jabra bluetooth when hardware button is set. Installation ended with an error message, dunno why...
I also have a original german rom but the recipe doesn't work
@tommatt:
When you say ...
Created a ShortCut of \Programme\Voice Command\VoiceCmd.exe to "Startmenue"
Click to expand...
Click to collapse
... do you mean "create a shortcut of \Programme\Voice Command\VoiceCmd.exe in folder \windows\Autostart\?
Well I did that. I even install a german version of voice commander I bought for €29,90. I didn't get it from "anywhere"
The prog simply doesn't show up when I long press the phone button. When I manually start the \Programme\Voice Command\VoiceCmd.exe then for 5sec a symbol is shown in the menuebar. But then it disappears.
What is the workaround for this? Do I have to patch to a different rom?
CAUSE: I want to call my contacts by using the voice. The build in program is ****. Does HTC really expect me to assign voices to all my contacts?
Thanks for the help it works also with cable headset. Does anybody know how to ad the cable headset button "long press" for voice command?
Thanks,
Snappy
If Only I could find anywhere!!!
modify MSVC present in ROM to speak/listen to German lg
hi folks,
I run dutty's 2.3a MSVC release on my phone (WWE). Could anyone point out what must be changed in registry and copied to \windows dir on the diamond to make mscv speak and recognize germany language?
I got the installation cab from the german release here, but think it would also work this way rather than written in the first post what does not work for me, cos msvc (the current build like 19719) is part of my rom and NOT installed to program files but to \windows.
Thanks for your help
regards,
Pat
MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Here you have all the links where you can buy it:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/about-voice-command.mspx
TDO
Snappy said:
Thanks for the help it works also with cable headset. Does anybody know how to ad the cable headset button "long press" for voice command?
Thanks,
Snappy
Click to expand...
Click to collapse
this is what i want to know, can someone aswer to his question? (sry for my english)
For the no english men:
da mußt nix tun, geht automatisch. (Wenn nicht: 1.) Mülltonne öffnen, 2.) Gerät hineinschmeißen, 3.) Fertig)
oder Var. 2: vermutlich hast dein Gerät zu tode bespielt (verstellt), also dann rate ich als Test: 1.) Backup machen 2.) MSMC 1.60 Ger. cab installieren 3.) wenn errormeldung , einfach ignorieren (ist bekannter bug) 4.) Softreset -- Fertig
Good luck

KaiserTweak : can't get the dial pad to beep

Hello,
I searched a long time accross this forum and google but I didn't find a solution for my problem :
I would like my dial pad to beep when I press a key, but I want each key to produce a different sound (tones).
When I try to do this with KaiserTweak, I can't change this option from "vibrate" to "tone". It always go back to "vibrate".
I also tried this solution :
http://forum.xda-developers.com/showpost.php?p=2184513&postcount=2
But the problem is that the beep is the same for all the keys.
Does anyone knows a solution for me ?
I am running the official HTC ROM 6.1 with the last version of KaiserTweak ...
Thanks !
hey i have this problem but for a different reason.
i tired to download the vibrating keys.cab and messed up my keypad. im using dutty's wm6.1 hybrid rom.
any fixes?
dizzy33 said:
Hello,
I searched a long time accross this forum and google but I didn't find a solution for my problem :
I would like my dial pad to beep when I press a key, but I want each key to produce a different sound (tones).
When I try to do this with KaiserTweak, I can't change this option from "vibrate" to "tone". It always go back to "vibrate".
I also tried this solution :
http://forum.xda-developers.com/showpost.php?p=2184513&postcount=2
But the problem is that the beep is the same for all the keys.
Does anyone knows a solution for me ?
I am running the official HTC ROM 6.1 with the last version of KaiserTweak ...
Thanks !
Click to expand...
Click to collapse
Anyone knows a solution for this problem ?
Maybe ask in the KaiserTweak thread?

Vibrate to Connect in 6.5

is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.
GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.
that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset
I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.
Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks
i have the same problem and i would like to know how to fix it ..
thanks all
-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee
The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_
hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.

Button 1 (Hold) Doesn´t work

Hi
I´m trying a new rom (WM 6.1 with iPhoneToday) in my HTC Diamond and It´s perfect, but a have a big problem, the Button 1 (hold) (Answer key) doesn´t work, I usually set this button to rotate the screen, but now, no matter what fuction asign, (Accept/Close, Open a program....), I make a soft reset after changing de configuration, and the configuration is ok, but It doesn´t work.....
I´ve been searching a lot, but I didn´t find the answer...
Thanks and sorry for my english...
gtavo said:
Hi
I´m trying a new rom (WM 6.1 with iPhoneToday) in my HTC Diamond and It´s perfect, but a have a big problem, the Button 1 (hold) (Answer key) doesn´t work, I usually set this button to rotate the screen, but now, no matter what fuction asign, (Accept/Close, Open a program....), I make a soft reset after changing de configuration, and the configuration is ok, but It doesn´t work.....
I´ve been searching a lot, but I didn´t find the answer...
Thanks and sorry for my english...
Click to expand...
Click to collapse
I think I've seen somewhere that new version of one program solves "Answer key problem". Maybe S2U2? Or Showcase?
Do you have one of these programs?
Yes, I use S2U2, I´m going to have a look to the new version....
Thanks
I've found it!
"fixed the long press Answer key problem introduced by v2.22.
if the long press Answer key function still cannot be assigned normally, stop iLock2 & then delete the \windows\long_send.lnk first"
http://67.43.3.117/~acs2co/S2U2-changelog.html
thanks cyberdemonVZ, but it didn´t work..., I followed the instructions, but still doesn´t work....
Thank you very much anyway...

Categories

Resources