Related
I have searched for solutions for the past 2 days but cant find one, if i missed it or this post is redundant , i apologize in advance.
Now my tilt is driving me crazy. It started last week when The touch screen wasnt working, but i fixed it by doing a couple of soft resets. then all the sudden, everytime i slide my keyboard out, the touch screen would stop responding. this went on for a day, then yesterday, when i tired to use the keyboard, the screen went blank, like the light died or something. but when i put it back on portrait, the screen would light up again.
A few moments later, the touch was responding, tried to use the keypad then the screen went blank..tried soft resets about 5 times and uninstalled all recent added programs (skyfire) ..finally the screen was working but the touch still wasnt working.
So this morning, i had the bright idea to do a hard reset....dumbest idea ever cos now its stuck at the screen where i have to "tap the screen to set up your wm device" and guess what..the touch screen isnt responding
plz i really need help with this. all so , i have a broken tilt.., well lcd screen is cracked...can i try to dismantle both tilts and replace the screens?
Ok, i used Code Factory's Remote screen alignment to bypass the alignment, but if i cant use the touch screen or the keyboard, the phone is pretty much useless for sending any information or making calls..is there a way to fix this?
I have had this same issue with my tilt. I could use the scroller on the left side of the unit to navigate but no touch screen. Both times that this has happened to me I removed the screen protector that I had on and restored a backup that I had on my storage card (I run a backup weekly). This has always fixed my issue. You could try another hard reset, not sure if that will help but do you get any lights on the keyboard when you slide it open? Is your tilt less than a year old because there is a manufacturer's warranty too.
Jim
when i slide the keyboard, i do get lights on the keyboard but not on the screen...it just goes dead..but when i slide it back in, the screen comes to life.
I cant do another hard reset cos i have to input the "1,2,3,4" code.
Also , the phone just got out of the 1yr warranty this month...awesome
I want to buy a replacement screen with a new digitizer but i need to be sure that is the problem.. ive searched for this keyboard problem but still have no answers
Now I'm having the same issue, touch not responding. I first noticed it about two days ago, when I slide the keyboard out, I could type just fine, but when I went to send the message the touch screen wouldnt work, so I'd close the keyboard and it would work. well yesterday it stopped working all together, so i used my d-pad and did a sprite restore and it started working again. But then On my way home i hit the lock button, and it stopped working after that, and I couldn't get it unlocked. I used the inner soft key to hit the first part of unlock, but then I couldnt ever figure which button to hit to get the on screen part of the unlock. So I had no choice but to do a hard reset, and just like highoct now I'm stuck on the stylus setup , and the touch still doesnt respond. does anybody esle have any suggestions ? Thanks in advance.
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Oh yeah, I did manage to do a hard reset again, but now the screen is just white. I can hear the sound of it booting up but it still has a white screen. I tired going to the Bootloader screen ( Camera and power at the same time)...still have the white screen. I believe its a hardware problem but i don't know what it is...any ideas?
Ok now I've done a hard flash, using the same HTC kaiser rom 6.1 and it fixes the problem for a little bit, until the first time I slide out the keyboard , then the screen stops working again, any suggestions ?
iPhone 3G Screen Repair...finally an affordable answer
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Does this look like an apple website? did i say i had an iphone? GET OUT OF HERE!!!
Ninety Four said:
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Click to expand...
Click to collapse
And thats his only post, its spam. jerk him outta here
Tilt Touch Screen
highoct said:
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Click to expand...
Click to collapse
I know this thread is a bit old but was searching d forum for possible solutions cos yesterday i developed the same exact problem on my kaiser for no apparent reason!..flashing it hasnt helped and now im stuck on the wm setup screen..when u say u still have the same tilt with the original problem do you mean that the repair was unsuccessful? have you tried reparing it yourself? Thanks
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
grayfoxmg1 said:
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
Click to expand...
Click to collapse
same thing happened to me 3 days ago. touchscreen has just stopped responding.
it still worked when i slided my keyboard out, but only when it was out. then i realized it won't work at all (!) after soft reset. however, i could make it work again like that when i did the soft reset with the keyboard out. weird.
i tried searching, and decided to make a hard reset, flash a new rom, etc, etc., but no more touchscreen. at all. the device doesn't feel any touch in any case. nothing. i bypassed the beggining tap here with the storage card trick. (i've read it somewhere on the forum).
now i can only use my kaiser with the hw buttons, the keyboard, and that's it. no touch. really weird. please if anyone has any updates, solutions, anything, post. sniff sniff
mine doesn't have anything on the screen unless i slide it out, if i have it closed anymore, it just doesn't work at all.
try this:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
se1988 said:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
Click to expand...
Click to collapse
well, i tried both tips, but they didn't work. i'd like to say a big thanks anyway!
then i grabbed the kaiser service manual and took my device apart into pieces. i reconnected pretty much all the cables and stuff, but still no touchy. any further ideas?
you should try replacing the screen. im happy to say that this screen from this seller on eBay worked for me: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250539984183
look here for dissasembly video: http://www.fonlogix.tv/tiltlow.wmv
(to save it to desktop right click link and "save target as")
thanks for your help, i've just ordered a new screen! phew, i hope it's gonna work
i was replacing my g1 digitzer. I had the guide with me still took me 12 hours to figure out how to do it. i disassembled assembled it thousand times before the slide was properly working and touch screen was functional. Now the problem is, something is wrong i cant figure out.
When i open the keyboard the screen doesnt flip orientation. It does on its own.
When i type through keyboard the buttons change randomly and they dont respond to what i am pressing
. The music volume bar shows up it self , the sound is very very very low from the speakers.
Camera still works.
touch screen working perfectly.
The trackball, menu button, and all those on that panel are working fine.
please help me fix this thing
This not the right place for this. But might have somthing to drivers? And know this probly won't help but u should wipe ur phone if you have not all ready.
Youll have done what i did when i swapped my housing round, i missed 1 conntction that stopped my touchscreen working,,, and then i realised i put the keyboard sensor on upside down :how embarrasing smiley:
actually i damaged one of the connectors on the strip of my keyboard
everything else is working now except for few alphanumeric buttons!
recently phone screen is acting kinda weird...
well the problem is when i slide it up, only the 'X' tab or button only works. Other menus in the screen dont work like it should be...
when i slide it down works perfectly fine.
any ideas regarding the problem? Thnx.
since with the ba there is no actual sliding function, you know, the device does not really realize it was slid open unlike other sliding phones, i'd guess this would have something to do with the digitizer or the internal flex cable. maybe it gets strangled, when slid up, if i were you, i'd probably avoide sliding it, before the cable maybe gets cut or torn apart, you should very carefully open it up and look whether there is something strange or wrong with the inside of your device.
the procedure how to get inside the device you can find in the official service manual, to be found here: http://www.4pda-service.ru/netcat_f.../BLUE ANGEL/HTC_Blue_Angel_Service_manual.pdf
Looks like the "back" button on my vogue stopped working over the weekend, this make's it pretty much unusable for Android.. :/
Has anyone else had this problem and had any success fixing it?
I went and bought a Torx set to open up my vogue today. The back button still makes contact with the motherboard button and makes the "clicky" noise when the external button is pressed.
I am stumped.. looks like it is time to get on ebay for a new vogue.. :/
ran into this today-
hope it helps
http://forum.xda-developers.com/showthread.php?t=407323
Same problem here, on Kaiser
Well, I have the same problem on kaiser, just that apart from the back button, the menu, call and hang-up buttons stopped working as well. Seems to be a hardware problem, look for the service manual for Voque and you may be able to find a way to get it to work ...
mirth18 said:
I went and bought a Torx set to open up my vogue today. The back button still makes contact with the motherboard button and makes the "clicky" noise when the external button is pressed.
I am stumped.. looks like it is time to get on ebay for a new vogue.. :/
Click to expand...
Click to collapse
Probably a cold solder joint. I had the same problem. Just try applying heat (no solder) to the leads going from the microswitch to the PCB while applying a little pressure to the top of the microswitch (with a stick...don't burn yourself). I was able to reflow mine and make the back button work again.
I went ahead and got another vogue off ebay.. can't live without Android.. and don't want to give up on my cheap sprint plan!
The original vogue started acting really funny.. the end button would activate even though I hadn't pressed anything. This would make the phone pretty much unusable.. hang up on calls.. etc. I opened it up once more and just made sure everything was connected but it still happened. A few days later it seemed to stop happening.. but by then my new vogue was on it's way.
Not sure what exactly is wrong with it.. some sort of flaky connection or something. not a big deal now that I have the new vogue..
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Lesiroth said:
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Click to expand...
Click to collapse
Same with me, i can't reach from menu in a bottom side to upper side, maybe 10mm dead space + 7mm right side from bottom side to upper side.
Please help me!!
Sorry my english is not good
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
thanks but no fix it for my phone
I had the same problem sometime last year, which I eventually fixed by clearing cache partition and rebooting a bunch of times.
Unfortunately, the problem re-appeared today. So far, rebooting and clearing cache hasn't worked.
By any chance, have any of you installed the WiiMote Controller App? I was convinced that was what was doing it to my phone. (maybe not, as I never re-installed it though)
I'm about to flash the sbf file, but as Lesiroth said, that might not work
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
haroldz123 said:
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
Click to expand...
Click to collapse
my problem seemed to be disappeared after i soft reset n use stock rom
i tot launcher pro was the culprit but it is not
so i re-install LP n use for 1 day
d only problem i had was when i went for a jog, i tucked it on my waist (no in the pocket).
after that the screen stop working at all, i have to reboot by taking the battery a few time.
after 30 min or more, the problem was gone.
tis could be due to the stress applied to the screen when im joggin (as it it as "touched" while im jogging).
however, i removed beautiful widget n its addon too, dat could the source of the problem as well.
SOLUTION: soft reset, use stock rom / launcher for 1 day
if it still persist, it could a hardware problem
jtnw said:
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
Click to expand...
Click to collapse
I am glad that you solved your problem. Unfortuntely the past week or so has been a really busy time for me, I could not focus on this problem. I will try your solution, although I still think it is a broken digitizer on my part.
maybe the problem is the digitizer..
try to change rom or wipe it first..
if the problem still persist i think its the digitizer..
use only the original charger..
OMFG that worked on my phone!!!
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
----------------------------------------------------------------
A segment of my phone covering the home button went dead two weeks ago.. and duuuuude did this work!! its super smooth as ever!!! thanks a ton!!
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
silverslasher said:
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance