Related
Hi guys,
When I connect a card reader/USB flash memory to the USB-port on the connected 4-in-1 cable, how to access these memories?
I also have an external hard disk, which has its own power supply (so no "too less power" issue), but the Athena doesn't do anything with it.
Do these attached memories need to appear as Storage drives in the file explorer?
Thanks.
I received my 4in1 cable yesterday and I found that it recognize hard drive randomly. I mean that not all USB memory are accepted by system. First of all it accepts only low voltage ones and not all are recognized. About mouse host...it recognize mouse but it's unable to show pointer, even with some drivers found on the this forum that should enable it...
So I would like to know what kind of commercial policy is this??? HTC says that with this cable and device you can host HD, mouse...but it's all pretentious, because to use it properly it's really hard!!!
I'm quite disappointed!
Again: when an USB storage device is connected, assuming it's a low voltage device, WHERE to access the memory??
It's an old thread, but what the hell. Plug your USB memory into your 4 in 1 cable. Use file explorer, go to "My Device" where you will see MicroDrive listed. Further down you will see "Hard Disk". That's it.
Thank you, this solves my problem.
http://www.palonek.ca/
asci said:
I received my 4in1 cable yesterday and I found that it recognize hard drive randomly. I mean that not all USB memory are accepted by system. First of all it accepts only low voltage ones and not all are recognized. About mouse host...it recognize mouse but it's unable to show pointer, even with some drivers found on the this forum that should enable it...
So I would like to know what kind of commercial policy is this??? HTC says that with this cable and device you can host HD, mouse...but it's all pretentious, because to use it properly it's really hard!!!
I'm quite disappointed!
Click to expand...
Click to collapse
mouse pointer works fine with me. Are you using wm6?
I don't think it's just a voltage issue with USB host on the x7500 - I just don't think it can cope with reading from large storage devices. Mine reads 1 gb and 2gb sticks fine. It also reads my 4gb and 8gb sticks but I experience drop-outs and slowdowns with the higher capacity sticks.
I should imagine that a 200gb HDD would send the x7500 loopy. Besides which I don't see the point in having a pocket pc with a mains connected hard drive wired to it. Might as well use a laptop as that would be more portable.
Have I missed something here? It seems theres an external storage "drive" available for the Diamond (looks like it plugs into USB)??
http://www.coolsmartphone.com/news4351.html
Anyone know anthing about this? Does this mean that WinMo6.1 has Generic Storage Device drivers?
Anyone got a Usb -> Mini USB adapter (One of these!) and a pen drive to test?
just a fast test, and it didnt work :-(
No power is sent out of the connector
It's just a flash storage drive which happens to have the HTC logo on it... Nothing more than a promotional item and not intended to be used with the Diamond itself.
Mathew
Forgive me if a stupid question but the new rage going on is the new USB support for our NCs, what exactly can I do with that functionality now? Examples would be nice. Is it just simple stuff like keyboards, etc?
All of this is unconfirmed, but what I've seen mentioned includes webcams and game controllers in addition to keyboards/mice.
mass storage devices will work as well if you have an external power source
Another stupid question from my side:
How WILL this USB connectivity work? Meaning we connect any USB enabled device to the micro-USB port of the nook from which the charger connects?
That would be cool since that would enable USB keyboards to work with the nook..
obsidianblackhawk said:
mass storage devices will work as well if you have an external power source
Click to expand...
Click to collapse
And many USB thumb drives work without any external power at all. Not all of them, but an older 2GB of mine works perfectly (especially with the vold file modified so that mass storage devices auto mount)
Divine_Madcat said:
And many USB thumb drives work without any external power at all. Not all of them, but an older 2GB of mine works perfectly (especially with the vold file modified so that mass storage devices auto mount)
Click to expand...
Click to collapse
Would you mind sharing your vold line? Does it work regardless of the sdx partition actually mounted? (In other word, is it wildcarded for any type of flash, or just for your particular drive)
skwalas said:
Would you mind sharing your vold line? Does it work regardless of the sdx partition actually mounted? (In other word, is it wildcarded for any type of flash, or just for your particular drive)
Click to expand...
Click to collapse
This is all i used (the example line): http://forum.xda-developers.com/showpost.php?p=14548442&postcount=159
all of my micro usb cards work with a reader.
perhaps they need lesser power to run
So basically, I can plug up a webcam and video chat with a market app? Or am I being too wishful?
Still rocking the Incredible with the XDA Premium App.
flu13 said:
All of this is unconfirmed, but what I've seen mentioned includes webcams and game controllers in addition to keyboards/mice.
Click to expand...
Click to collapse
Is there a Keyboard/Mouse that will work with the Nook that anyone is using today? Of course, I don't understand how a mouse would work because there is no pointer/cursor in Android is there?
I'd love to be able to have a mouse/keyboard and not have to lug my laptop around on business trips but just use the Nook instead. May be wishful thinking I suppose.
As soon as you connect a mouse, a pointer appears.
flu13 said:
As soon as you connect a mouse, a pointer appears.
Click to expand...
Click to collapse
Cool, I'll have to monkey with this I suppose. Sounds promising.
flu13 said:
As soon as you connect a mouse, a pointer appears.
Click to expand...
Click to collapse
Cool, thanks. I have a few micro USB cables and a couple of female to female adapters on the way so I can hook a USB mouse and keyboard up to the cables.
flu13 said:
As soon as you connect a mouse, a pointer appears.
Click to expand...
Click to collapse
Did you need a powered USB hub for this, or does the nook power the mouse?
Requia said:
Did you need a powered USB hub for this, or does the nook power the mouse?
Click to expand...
Click to collapse
Depends on the mouse. If the mouse can run on 100mA, it will work with no hub (personally tested with a Logitech wireless).
Just wondering if anyone knows whether they've gotten the usb headphones with mic to work. I've been following that usb thread in development pretty closely (although I can't post there; not enough general posts, so I guess I'll have to start spamming), and it appears as though they are close, but I haven't seen a post definitely stating that it works. Seems as though they were getting some noise through the mic, but the rate was off. Too fast or too slow or something. Maybe someone knows?
Which Female to Female adapter to get?
I found some Female to Female adapters on Amazon, but they had mixed reviews. If you are using one successfully , I would appreciate more information about where to get it.
-Mo
Moritzio said:
I found some Female to Female adapters on Amazon, but they had mixed reviews. If you are using one successfully , I would appreciate more information about where to get it.
-Mo
Click to expand...
Click to collapse
Same here. I bought one from ebay for $1.98 but what they sent did not match the description or picture so I killed the charge with AmEx.
As for webcam support, not working as far as I have been able to test. I can get the nook to recognize the cam but the apps do not see it. Have tried yahoo msgr,tango, ooVoo,fring, ect...
As for uses, mouse,keyboard,sd card reader,direct connection to DSLR's for photo transfer, flash drives.
As for flash drives, I have about 20 here from various mfr and only 1 will worrk without a powered hub but using a powered hub, everything works.
Sent from my NookColor using Tapatalk
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I know need it to be with one usb end and not a very long cable . Thanks
Dude905 said:
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Thanks
Click to expand...
Click to collapse
It's probably possible, but it wouldn't work.
Take a look:
https://www.youtube.com/watch?v=0nqY2EXTHhE
Do some reading here:
http://forums.webosnation.com/hp-touchpad/331349-2gb-ram-upgrade-touchpad-attempt.html
In my opinion everything is possible with the right "CODE" and that is attached to a human memory with very smart neurons!
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Dude905 said:
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Click to expand...
Click to collapse
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
HP_TOUCHPAD said:
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
Click to expand...
Click to collapse
That would work ? that would be great if it can . I would like to place movies onto the usb flash drive and play off it, So you saying it can work ? Thanks
Of course it works, you can play movies directly from the USB flash drive. You will need to supply power to the USB drive, connected by wire or using a Power Bank.
https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_9?ie=UTF8&qid=1486006080&sr=8-9&keywords=OTG+micro+usb+hub
If you want to make it portable:
https://www.amazon.com/2600mAh-Portable-External-Battery-Charger/dp/B01N5O3OX3/ref=sr_1_10?
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I only need it to be with one usb end and not a very long cable . Thanks
Is a Micro USB Port, is the same as your charger. The one that you connect to your Tablet. Search and do some reading on how it works, is very simple but you have to understand how all comes together, there is information on this site also.
Once you have Android install on your tablet, it works the same as others Android or Tablet Devices.
I finally got a OTG Micro USB straight cable, usb on one end and micro on the other, try it out and nothing happens, is there a setting with the tablet that needs to be turn on or off ? thanks
What version of Android are you using? or the type or ROM?
HP_TOUCHPAD said:
What version of Android are you using? or the type or ROM?
Click to expand...
Click to collapse
Its ......Kitkat .... Android 5.1.1 version and cm-11-20161219-NIGHTLY-MLQ-tenderloin .... This is very stable ... Thanks
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
HP_TOUCHPAD said:
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
Click to expand...
Click to collapse
I don't see nothing since nothing happens once I connect it, though if I use the cable to connect to my computer I am able to see the tablet internal drive, but not to a flash drive from tablet to flash . This is why I was asking what's exact cable type for this tablet port . I'm thinking it isn't the correct one . There so many different sizes out there. Thanks for your suggestion, much appreciated
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
HP_TOUCHPAD said:
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
Click to expand...
Click to collapse
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Dude905 said:
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Click to expand...
Click to collapse
All the information is on this web site:
https://forum.xda-developers.com/showthread.php?t=1582771
And for the second time this is the OTG cable that I have, which I posted the link : https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_31?ie=UTF8&qid=1486568545&sr=8-31&keywords=micro+usb+otg If you look at the specification of how it works it tells you is a "Micro Usb HUB Adaptor with Power Powered"
The HP touchpad or old devices do not offer power to the micro usb port, you need a Y adapter one to supply power to the USB flash drive and the other one for data.
That is why I said, do some research to understand the connection, which it clearly shows on the Amazon product.
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Dude905 said:
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Click to expand...
Click to collapse
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
HP_TOUCHPAD said:
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
Click to expand...
Click to collapse
Yeah, those devises sound really good . I might just get one for that fact alone .... Though, it isn't really what I needed