Hello to all.
I have a small problem with my HTC Diamond.
As soon as I throw the program of iGO8, my Diamond, don't stop to make a sound that looks like a clicks, and it is permanent!! can tell me to you if it already happened to you, and if you succeeded fixit this problem!!
Excuse me, It is my first post here!!
Thank you for advance to you all for your help!!
Never happened to me...
pedmond said:
Never happened to me...
Click to expand...
Click to collapse
same hare.
of course i use the last and legal version of iGO8
A friend of mine got the same problem.
You have to disable click sound in sound settings of the diamond.
Not sure what it is in engilsh but if i translate it from french it's "touching the screen low high".
It's looks like igo is making a polling on the screen and if you have this sound enabled it's ticking all the time.
Hope i helped.
regards
Same problem here.
But if you disable click sounds for buttons will work.
Good luck !
Same problem to me, thoose noisy clicks ( After i disable button clicks they vanished
Thank you very much!
Add to sys.txt located in /Program Files/iGO8 (your installation folder):
[sound]
mute_os_key=1
saintman2 said:
Add to sys.txt located in /Program Files/iGO8 (your installation folder):
[sound]
mute_os_key=1
Click to expand...
Click to collapse
Thankx mate. You fixed my problem.
nuxator said:
A friend of mine got the same problem.
You have to disable click sound in sound settings of the diamond.
Not sure what it is in engilsh but if i translate it from french it's "touching the screen low high".
It's looks like igo is making a polling on the screen and if you have this sound enabled it's ticking all the time.
Hope i helped.
regards
Click to expand...
Click to collapse
Goto GPS information screen and look in the lower right corner. Then you see what's making him ticking.
But the solution from saintman2 works perfect.
Related
Hey guys, I'm wondering if anyone has experienced the following before (I can't find any mention of it in various Kaiser FAQs etc)?
When I click on an SMS (and possibly MMS and E-Mail) the device automatically scrolls way past the bottom of the content and I have to manually scroll up to actually read it. I could understand it doing this if I was replying to the message, but I'm just clicking to view it.
I've experienced it on a couple of ROMs now - Dutty's dualtouch and Kaiser release so it seems to be something deep-rooted in the OS / messaging software.
Attached is 3gp video which demonstrates the problem. The quality is real bad but it's enough to see what's going on.
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Deframe said:
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
Click to expand...
Click to collapse
A quick search is the best help that I can give you at this point.
Audio said:
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Click to expand...
Click to collapse
Thanks for the quick response but disabling that doesn't seem to make a difference
Same Here
I'm having the same problem (versions below). Any ideas?
hmmm... it should work... Are you sure you disabled it? Just to show you I didn't just make up a solution , here is a link to another thread which states that disabling d-pad navigation should solve the issue...
http://forum.xda-developers.com/showthread.php?p=1778601&highlight=text+bottom+screen#post1778601
Deframe said:
Thanks for the quick response but disabling that doesn't seem to make a difference
Click to expand...
Click to collapse
just wait a few seconds and than soft-reset!
this solved my problem!
steph
Success
Tried it a second time and this time it worked. Thanks Guys.
Problem occured also in my loved Tytn II.
It is a good news, Thanks U
yep - worked for me too.. thx Audio
thanks, disabling the PIE Dpad navigation tweak fixes the problem...
Soft reset did the trick, thanks all!
Same here! initially i too had problems that after changing it in KaiserTweaks, it still behaved the same, but the wait and then softreset did the trick!
Thanks a lot!
Hi all, has anyone managed to sort out the 2/3 second delay from phone receiving a call to playing the ringtone? Its rather annoying
I'm also having this problem.
Anyone found a workaround yet?
Anyone? I'm very curious as well.
I am using the new ROM and got also this problem.
My HTC Wizard, running on WM5 has the same problem. Never bothered me, really and always thought WM was the culprit.
my blackberry used to do the same thing!
someone1234 said:
my blackberry used to do the same thing!
Click to expand...
Click to collapse
My nokia N95 8gb and 8600 Luna do the same thing as well!!!...to be honest it doesnt bother me in the slightest. I think most phones do the same thing.
nokmond said:
Hi all, has anyone managed to sort out the 2/3 second delay from phone receiving a call to playing the ringtone? Its rather annoying
Click to expand...
Click to collapse
Open the registry editor:
HKEY_CURRENT_USER >>>> ControlPanel >>>> Sounds >>>>> RingTone0
And modify 'Script' by removing the w3 this should solve the problem let me know if it did not !!
Spawn12 said:
My nokia N95 8gb and 8600 Luna do the same thing as well!!!...to be honest it doesnt bother me in the slightest. I think most phones do the same thing.
Click to expand...
Click to collapse
I think its in case its on the desk, so u can see it and hit silent.
Mahmood said:
Open the registry editor:
HKEY_CURRENT_USER >>>> ControlPanel >>>> Sounds >>>>> RingTone0
And modify 'Script' by removing the w3 this should solve the problem let me know if it did not !!
Click to expand...
Click to collapse
hmm sounds pretty much the same to me after editing it..
mgear356 said:
hmm sounds pretty much the same to me after editing it..
Click to expand...
Click to collapse
then do this tweak hoop that it works now:
HKEY_CURRENT_USER------>ControlPanel------>PhoneNetSelMode------>Timeout
change the value from 3000 to 0
thanks for your help..
but then still the same..
i think its the natural lag on windows mobile when theres a call?
so different from my n95..
the lag seems to be the time it takes to initialize the mp3/wma/wav player and then load your ringtone from the storage.
Ya my March 2008 firmware updated Nokia N73 also has this 2-3sec lag.. It annoys me.. i 'miss' few of the missed calls (short ones) given due to this...
I've just increased the time it takes before a call is forwarded to voice mail.
Not ideal but at least I'll have fewer missed calls now.
I even had the same Issue on my Motorola RAZR...
mouseymousey said:
I've just increased the time it takes before a call is forwarded to voice mail.
Not ideal but at least I'll have fewer missed calls now.
Click to expand...
Click to collapse
How do you do that?
@nokmond
presuming you are in UK then you can change this by following the instructions in this thead:
http://www.esato.com/board/viewtopic.php?topic=40232
It may work for other providers but don't know, it definitely works on O2, T-mob etc here.
S
Thanks mate
try using *.wav as the ringtone. Let me know if it helps.
Hey there...
I was looking throug the Regs of my Diamond and under HLM/Drivers/BuiltIn/GSensor there is a Value called "EnableShaking".
Mine was set to "0" and therefore problebly "Off"
I gues you can shake youre Diamond to switch something on or off!
Does anyone have an idea of what this can be use for and i we could find some cool funktions for that?
Chears...
Edit:
Theck this out freinds...
http://forum.xda-developers.com/showthread.php?t=406769
All credits to "sushilange"
Thanks alot
this will be a nice one...did you try it?
007 said about his martini "shaken not stirred". we also want our diamond shaken!
does nothing...
I ofcause tried swithing it ON be setting the Dword to "1" and I've been shaking it for ours but i cant find any programs or settings like sound that get affected be the shaking... But maybe some of the developers could find a use for it?
Chears...
Search and search !
Check here m8 !
http://forum.xda-developers.com/showthread.php?t=403939
maybe its for win mob7?
anyone remember the demo where the shake the phone to resume from standby?
eurorpeen said:
Check here m8 !
http://forum.xda-developers.com/showthread.php?t=403939
Click to expand...
Click to collapse
I know of this app and allready have it installed, but dosn't have any shake funktions...
Chears...
Hornet331 said:
maybe its for win mob7?
anyone remember the demo where the shake the phone to resume from standby?
Click to expand...
Click to collapse
If it works on a WM7 demo we should be able to get it working...
the sony ericsson w910iis where you can shake it changes songs and goes thru messages.
that would be cool on the diamond
Sad to say that this tread is dead...
I gues its not a funktion worth exploring...
zme999 said:
Hey there...
I was looking throug the Regs of my Diamond and under HLM/Drivers/BuiltIn/GSensor there is a Value called "EnableShaking".
Mine was set to "0" and therefore problebly "Off"
I gues you can shake youre Diamond to switch something on or off!
Does anyone have an idea of what this can be use for and i we could find some cool funktions for that?
Chears...
Click to expand...
Click to collapse
its may be for step counter in the other hand, a calorimeter or step counter software working with Gsensor would be great,
Someone found the use for shaking the Diamond
Tjeck the first post
Thanks to "sushilange"
All the credits goes to him, buy him coffee
what about shake to unlock?
Is it possible to connect it 2 slide2 unlock
Goodmorning to all of you...
I'm having a question..I have a compact IV now for a couple of weeks which is now fully customized with an original stock ROM from HTC but since a few days i'm not able to zoom with Opera..
what I mean is that when I search for a mobile website, it will open, but I can't zoom in or out with tapping on the screen...I already looked into the settings and that should be ok..the mobile view option is enabled...
I'm also using Advanced Config..had that something to do with this??
I hope somebody could help me with this, maybe i'm not the only one with this problem!
Thanxx everybody in advance
Jeroen
is there somebody who can help me with this???
not just you
i can't use it too !
Have you tried a soft reset?
Mostly when I have a problem this is solved by a soft reset.
Also turning off and on wil help often to problems that occur after some time.
Grtzzz
Can you zoom by using the "wheel"? I mean by using a circular motion with your finger around the center button?
TomInMB said:
Can you zoom by using the "wheel"? I mean by using a circular motion with your finger around the center button?
Click to expand...
Click to collapse
No, i'm not even able to use the wheel.. and a soft reset also doesn't work either.. also some text on the right hand side of the screen isn't aligned..maybe I can make a screenshot of it...
Which rom do you use? This might be the problem.
Remember when it worked for the last time?
If yes think about what you did after.
Maybe you installed a program which causes this.
Try to uninstall the program or programs if you did.
When you installed more then one delete one after each other and remember which program did make the problem to your browser and post it here.
Grtzzz
here's a screenshot:
baraata said:
Which rom do you use? This might be the problem.
Remember when it worked for the last time?
If yes think about what you did after.
Maybe you installed a program which causes this.
Try to uninstall the program or programs if you did.
When you installed more then one delete one after each other and remember which program did make the problem to your browser and post it here.
Grtzzz
Click to expand...
Click to collapse
at this moment i'm using the original HTC stock rom v1.37 Europe edition, i've installed Advanced Config and that's all....i might try another hard reset but I would prefer another method to get rid of this annoying problem...
1.37
Why not go to 1.93 its much faster and smoother.
This might also solve your problem.
Grtzzz
Pirtje...as for the text overflowing on right side...Opera sometimes does not reposition text that are in tables of more than one cell (and possibly other times as well). If those items are in a table, that is most likely the cause.
TomInMB said:
Pirtje...as for the text overflowing on right side...Opera sometimes does not reposition text that are in tables of more than one cell (and possibly other times as well). If those items are in a table, that is most likely the cause.
Click to expand...
Click to collapse
allright I didn't knew that.. thanxx for your reaction!
baraata said:
1.37
Why not go to 1.93 its much faster and smoother.
This might also solve your problem.
Grtzzz
Click to expand...
Click to collapse
I might do that later...because I don't have an version which I can use, because I have a mda Compact IV which is Hard spl-ed 1.40 but can't upgrade to 1.93..
at least...don't know how to manage that...
Check that you have not got a tick in the 'mobile view' in settings. You can't zoom when that is checked.
nokmond said:
Check that you have not got a tick in the 'mobile view' in settings. You can't zoom when that is checked.
Click to expand...
Click to collapse
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
SOLVED!!
Can a mod change this thread as solved???
can I also do that myself??
Greetzzz Jeroen
Pietje_1985 said:
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
Click to expand...
Click to collapse
Your welcome.
Pietje_1985 said:
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
Click to expand...
Click to collapse
I have the same problem and I'm sure, first it was possible to zoom in mobile view for me. When I zoomed in this mode the site zoomed in and text was broken to the new format after a few seconds. Now it is in fact only possible without mobile view, but this is not very usefull for me, because text is will not be reformated in this mode. Don't know what happend.
first uncheck the mobile view box......and then anywhere on the website double tap the screen and this will zoom in automatically and then start using the wheel to zoom in or out etc....this will auto format the text to fit the screen......the catch is to "double tap" on the screen first before using the scroll wheel otherwise the scroll wheel will not auto format the text to fit the screen......
irv777 said:
first uncheck the mobile view box......and then anywhere on the website double tap the screen and this will zoom in automatically and then start using the wheel to zoom in or out etc....this will auto format the text to fit the screen......the catch is to "double tap" on the screen first before using the scroll wheel otherwise the scroll wheel will not auto format the text to fit the screen......
Click to expand...
Click to collapse
Perfect - this works!
Dear forum,
I've followed the instructions to make iGO8 work on my Diamond, found in this forum, completely and iGO8 works well.
The only thing, rendering it unusable for me is that when entering the address search mode and clicking on "select street" the field where I usually enter the street name gets spammed by "å" chars constantly. I tried everything, uninstalled everything except TouchFLO.
Is this problem known?
The iGO8 version is 8.3.2.80621.
Thanks in advance
panni
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
this problem too can be solved, by using in settings for backlight, you have to use option "use same as device" and no problem, or in settings.ini , add number 2 for power option - this one i discovered with myself
Greetz
thanks for info
i ll try it
l.
sucro said:
this problem too can be solved, by using in settings for backlight, you have to use option "use same as device" and no problem, or in settings.ini , add number 2 for power option - this one i discovered with myself
Greetz
Click to expand...
Click to collapse
Ah, thanks for the tips, interesting.
That explains the strange behavior on "always on"-mode, I guess the iGO guys constantly spam control chars, which normally shouldn't be handled by the input boxes in the street view, to overcome backlight/power management of the device.
mediaworld2007 said:
thanks for info
i ll try it
l.
Click to expand...
Click to collapse
You are welcome
exactlier you can change this line in sys.txt
[power]
powermgm_state=0
with this
[power]
powermgm_state=2
panni said:
Ah, thanks for the tips, interesting.
That explains the strange behavior on "always on"-mode, I guess the iGO guys constantly spam control chars, which normally shouldn't be handled by the input boxes in the street view, to overcome backlight/power management of the device.
Click to expand...
Click to collapse
You are welcome, i'm sorry for my bad english, cause it's not my native language
you are right, it's very stupid, that is input boxes linked with power managment
Greetz
panni said:
Dear forum,
I've followed the instructions to make iGO8 work on my Diamond, found in this forum, completely and iGO8 works well.
The only thing, rendering it unusable for me is that when entering the address search mode and clicking on "select street" the field where I usually enter the street name gets spammed by "å" chars constantly. I tried everything, uninstalled everything except TouchFLO.
Is this problem known?
The iGO8 version is 8.3.2.80621.
Thanks in advance
panni
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
Click to expand...
Click to collapse
Thank you! I had exactly the same issue!
Thank's for this information
panni said:
Dthe field where I usually enter the street name gets spammed by "å" chars constantly.
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
Click to expand...
Click to collapse
Man you really saved my day.
Thank you oh so much!
panni said:
Dear forum,
I've followed the instructions to make iGO8 work on my Diamond, found in this forum, completely and iGO8 works well.
The only thing, rendering it unusable for me is that when entering the address search mode and clicking on "select street" the field where I usually enter the street name gets spammed by "å" chars constantly. I tried everything, uninstalled everything except TouchFLO.
Is this problem known?
The iGO8 version is 8.3.2.80621.
Thanks in advance
panni
Update:
I've found a solution provided in a huge iGO8 thread on ppcw forums. Edit data.zip/config/keybind.txt and add the following to the [default] section:
x87="NOP"
xE5="NOP"
Click to expand...
Click to collapse
I had exactly the same problem, only that this solution didn't work for me; The solution to set change the power setting from 'backlight always on' to 'use device setting' did work though. So, thanx!
I had the same problem and many thanks for the solution, it works perfect
Thanks
Thank you all for sharing this, it's working fine for me with changing the configuration file from data.zip . Stupid bug
sucro said:
this problem too can be solved, by using in settings for backlight, you have to use option "use same as device" and no problem, or in settings.ini , add number 2 for power option - this one i discovered with myself
Greetz
Click to expand...
Click to collapse
Thank, sucro. You da man.
thank U !!!!!
tried to fix that one for weeks...
thanx alot for this post, had the same problem on my Jade, all working now...
thanx 8))