I can't set a ringtone, or any other notification for that matter.
When I select one and press ok, nothing happens, it just stays on that screen.
Also I don't hear any ringtone when there's a call incoming.
PLZ HELP!
Problem solved after hard reset.
I was ready to install a cooked rom, and flashed the hardspl.
After that I tried it again, and it worked again
Related
when I make a call, I can not end the call, Even if the other part hangs the phone till I soft reset my Kaiser.
I can end the call only when I recieve the call.
This also happen on a clean rom after hard reset.
Tried several Roms,now using WM6 1.181.415.4, Radio 1.27.15.32.
Please Advice
Regards
I'm maybe just being stupid - but I can't get my diamond to vibrate when I get a text. I think I've set it correct, but its not working.
Using TouchFlo - I go into "Settings", then "Sound".
I press "Advanced", and then choose the "Notifications" tab.
From the "Event" drop down list I select "Messaging: new Text Message"
Then I tick the "Vibrate" box.
Is there something else I need to do?!
BTW - my ROM version is 1.37 if thats relevant
If you mean that your phone should 'wake up' and vibrate when you receive an SMS, then have a look at the 3rd point from the link below:
http://forum.xda-developers.com/showthread.php?t=398265
If it won't vibrate at all, and only will make a sound I don't know the answer. Hope this helps.
Thanks for the reply.
Unfortunately it won't vibrate at all on receiving an SMS.
Even if the phone is awake and I get a message it does nothing apart from a little green 1 appears on the messaging icon - and the directional pad light flashes.
The other thing I've noticed when testing this is that the phone takes about 5 seconds to actually start 'ringing' when getting a call!
p3eps said:
Thanks for the reply.
Unfortunately it won't vibrate at all on receiving an SMS.
Even if the phone is awake and I get a message it does nothing apart from a little green 1 appears on the messaging icon - and the directional pad light flashes.
The other thing I've noticed when testing this is that the phone takes about 5 seconds to actually start 'ringing' when getting a call!
Click to expand...
Click to collapse
Yep ive noticed that on mine as well...im running 1.37 rom uk spec diamond and it takes a good few seconds before my phone will ring when i have an incoming call. Annoying but liveable i guess..also my phone wont vibrate either when receiving a text as well...just get the alert and notification.
p3eps said:
Thanks for the reply.
Unfortunately it won't vibrate at all on receiving an SMS.
Even if the phone is awake and I get a message it does nothing apart from a little green 1 appears on the messaging icon - and the directional pad light flashes.
Click to expand...
Click to collapse
Mmm, bummer... Just tested it with my phone. I previously used the 'wake on SMS' edit, and now selected 'vibrate' and unchecked the sound alert for Messaging: New text message. It worked like a charm.
The other thing I've noticed when testing this is that the phone takes about 5 seconds to actually start 'ringing' when getting a call!
Click to expand...
Click to collapse
Same here, even with my previous HTC Wizard. I guess it has to do with WM devices in general!?
Hmmm... now I've just realised that my phone doesnt chime or anything when I get a text - despite me having a tone set.
I tried a soft reset - but this did nothing. I dont really want to try a hard reset as I will lose all my proggies etc.
I've maybe give the tweak above a try!
I've tried the above tweak, but I'm still having no success.
I'm getting absolutely no alert at all when i get a text message. With the tweak, the phone comes out of standby and the screen displays the message - but it won't chime or vibrate at all.
Any ideas?
A phone that won't alert me of a text is no use as most of my communication is through texting!
Finally resorted to a hard reset - which solved the problem.
Spent the last few hours reinstalling everything!!
Now time to make a sprite backup whilst I have everything sorted!
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Berx1 said:
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Click to expand...
Click to collapse
didi you installed pointUI and the SystemInternalsV2????
you might not like the answer, but hard reset has fixed that problem for me with the diamond and 2 other htc phones i had in the past.
adempozhari said:
did you install pointUI and the SystemInternalsV2????
Click to expand...
Click to collapse
What is pointUI ? - I have the standard diamond branded user interface from O2 with all the system internals and the ROM version 1.93.207.2 German.
Please help me - I really do not want to do a hard reset because the last time I could not retrieve my back up with the Sprite backup utility .
Thanks in advance for any help.
i can't believe i'm now posting in this. i remember telling you to post this on the main diamond forum and now i'm having the same problem.
i've tried putting the ringtones in the internal storage, and on the phone's main memory, sometimes i hear the ring for a split second before it goes silent.
from searching, it seemed like some people have had this issue with some SRS WOW program but I don't have that.
have you been able to resolve this? I too would like to avoid a hard reset if at all possible, i just got the phone setup the way i want it and it would take a ton of time to get it back....
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Twabi2 said:
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Click to expand...
Click to collapse
that's usually one of the first places i check... i'll keep it in mind though.
i think i might have an idea what my issue might be, so it was working this morning but i noticed microsoft's voice command was announcing the name of the caller as it was ringing. so i think it might be an issue with the msvc. i'm going to try disabling the voice announce and see what that does...
Problem Solved!
Hi,
guess what - I finally found the solution
I never bothered to read the Diamond manual as I believed the user friendly interface to be self-explanitory - however, I overlooked something very important!
When setting the volume up or down by means of the buttons on the left hand side of the Diamond, the usual vertical bargraph type of display appears and reacts according to how the adjutment is made with the volume up or down buttons, this is clear. There is also the possibility to mute the phone or to put it into vibration-only mode.
Now, at the top left hand side, there is an arrow (looks like this: <). If you quickly tap on that with the stylus before the screen goes away again, you will get a new screen for another setting - now this setting is for adjusting the ringing volume / mute / vibration settings (now the arrow is on the top right and looks like this: >
It is so simply expained: The system volume is not the same as the telephone ringing volume and just requires the quick click on the top left hand side of the screen and voila, bob is your uncle! You can then set the ringing volume up and your phone will ring again.
I wantend to know why the heck the ringing volume just changes or what caused the problem and I have also been able to determine why the ringing volume settings change - to explain:
When setting the SYSTEM VOLUME to mute - then the PHONE RINGING VOLUME is also muted! However, when then setting the system volume up again, the ringing volume still remains muted! This is important to know and it can also happen accidentally or it may be forgotten to reset the ringing volume. I dare to say that this was not really thought about very well and I hope the developers will change this or show a VOLUME STATUS for both the SYSTEM and RINGING volumes somewhere on the desktop/today screen.
... or would that not be a good project for a developer here on this forum perhaps? I would appreciate a comment here...
Thanks anyway for the kind responses and willingness for your help.
I have to date still not read the actual over 260 page little manual booklet, but it probably is described in there. Moral of the story: RYFM (for those who know what that stands for)
Amendment: Found it described on page 42 in the manual booklet - it's actually described there but can be easily overlooked and it is not described that the system volume settings affect the ringing volume settings.
Ok, so the phone rings now but I have a similar problem with my GPS receiver
I will open another thread for this - hopefully someone can help me.
Best regards,
Mike - Germany.
I had the same problem.
It happened to me.
All the system sounds were fine, but the ring wasn't there.
Checked settings, change ringtone, tried a lot of stuff.
I was begginning to think about a hard reset when I found my problem origin:
At least in the ROM that I use (Shaks), when you press one of the volume keys in the side of the phone, you change system and ring volume.
If I press it all down, it goes to zero then vibrate then silent, and normally the system and ringer volumes are equal when you do this.
In that system volume screen that appears when you press volume key, there is a arrow in the top left. If you press it, you'll go "ringer volume" screen. I noticed that system volume was in maximum but the ringer volume didn't fallow it.
That said, if your ROM uses the volume keys in that same way, press that arrow and check if the ringer volume is on too.
My Fuze is becoming unusable: It is going into a loop of changing volume and switching to the connection manager screen... Here is a video: http://www.youtube.com/watch?v=uYU0aCpd504
I tried a hard reset and flashed the ROM to the default AT&T one but the behavior has not disappeared.
Please help.
Loop of application switching, primarily volume popup on off, etc PLEASE SUGGEST
msati said:
My Fuze is becoming unusable: It is going into a loop of changing volume and switching to the connection manager screen... Here is a video: http://www.youtube.com/watch?v=uYU0aCpd504
I tried a hard reset and flashed the ROM to the default AT&T one but the behavior has not disappeared.
Please help.
Click to expand...
Click to collapse
Not sure when it began sometime after second rom flash, new rom flash, doesnt solve, basically try to eperate the phone and the black volume adjust screen flashes on and off randomly at first it seems to be the comm manager volume popup and a few others flashing from one to another seems to have settled on volume, thought had it solved when i turned off button functions with ae button utility, like buttons are jammed will try again offer any advice please cant get anything done.
Hey guys, I have a SGA S5830C, running 2.3.6
Yesterday I was going to call a contact and, when I touched the contact to select him, the phone has stopped responding. I had to remove the battery to turn it on.
Well, let's try again. Select the contact, started to call and, instead of showing the options screen after press the call button, the screen turned black, showing only the status bar and stopped responding again. Battery off, battery on, phone on again. The same. Tested several times with a friend who works with me.
I stopped using the phone until I go out the work. I went to my gf's house and tested several times again. Same issue all the times.
Reset the phone to factory settings didn't work. All wipe didn't work. Reinstall original rom (Claro BR), didn't work. Install original 2.3.6 w/o carrier customizations didn't work.
I have no idea what to do
Can somebody please help? :highfive:
Edit:
I forgot some information
The call is completed, even if nothing apears on screen, but I can't use the phone until I restart it.
When I recieve calls, I choose to answer the call and the options (end call, keypad, etc) appears. I can hear the person and he/she can hear me, but only they can end the call, cause the phone doesn't respond, freezed on the options' screen.