Related
I have tried searching for the answer to this so please do not ridicule me if i missed it!
Is there a way of stopping the screen from being so dim when i press the power button to wake up device if it is locked.
I always lock the device when i am not using it and will quite often press the power button quickly to turn off the display. When i come to use the phone etc i press the power button to get the screen back then press unlock at the bottom of the screen then the unlock half way up the screen, phone unlocked. BUT when the power button is pressed to turn the screen on and the phone is still locked the screen is so dim i cannot see it in bright daylight. Is there a way of making the screen brighter so i can unlock it?
David
simple answer YES!
The registry key here controls the backlight lock level:
HKCU\ControlPanel\Backlight\LockLevel
There REG_DWORD Key called LockLevel can be set between 0-10 (0=0%, 10=100% locklevel backlight brightness)
The system defaults this setting to 0, hence the dim lock display.
I have found however that the value does not stick after a soft reset/reboot, and goes back to default, so i have set a startup .lnk file that runs a reg script to set this value silently on boot for me.... you can do this yourself using the latest taskmanager 2.9 from here: http://www.dotfred.net/TaskMgr.htm (/silent command line parameter was only added in v2.9 so i can run a reg script without the prompts!)
I like to have a bright pin/unlock screen as i like to use the screen as a torch/light by just pressing the power button!!
Enjoy.
Thanks!!
Thanks for the answer to that. I too have been having the same problem, and it has bugged the hell out of me, especially on those bright summer days .
Thanks heaps for that!!!
Sorry for the delay, but many thanks for the answer! Damned annoying that was.
Regards
David
How do i make this .lnk file? What should it say? Where do i put it? etc etc. Sorry for the question but not done any of this before. The reg edit was easy enough but now i am lost.
Cheers
David
Locklevel startup value
_DrG_ said:
simple answer YES!
The registry key here controls the backlight lock level:
HKCU\ControlPanel\Backlight\LockLevel
There REG_DWORD Key called LockLevel can be set between 0-10 (0=0%, 10=100% locklevel backlight brightness)
The system defaults this setting to 0, hence the dim lock display.
I have found however that the value does not stick after a soft reset/reboot, and goes back to default, so i have set a startup .lnk file that runs a reg script to set this value silently on boot for me.... you can do this yourself using the latest taskmanager 2.9 from here: http://www.dotfred.net/TaskMgr.htm (/silent command line parameter was only added in v2.9 so i can run a reg script without the prompts!)
I like to have a bright pin/unlock screen as i like to use the screen as a torch/light by just pressing the power button!!
Enjoy.
Click to expand...
Click to collapse
I also would like to do this, but havent figured out how to create a command line with TaskMgr that will execute at startup - would you share how it is done?
Also, when I set locklevel to any number other than 1, no dimming occurs when I lock my Tilt. I experimented because I thought I'd like a little dimming but not as much as the default - but it seems like it's all or nothing.
I hate the way the Kaiser and/or WM6 insists on spoonfeeding some settings to us, no matter how much we would like to permanently alter them!
peanutome said:
How do i make this .lnk file? What should it say? Where do i put it? etc etc. Sorry for the question but not done any of this before. The reg edit was easy enough but now i am lost.
Cheers
David[/QUOTe
my thoughts exactly..more instructions for this guy too please
Click to expand...
Click to collapse
BUMP - Anyone know how and what to do to make this .lnk file and then how to use it?
David
strange thing. When I adjust this value it messes with my backlight timeout. I normally have this set to 30secs, i.e. the screen goes dimmer after 30 secs. When I adjust the lockout value as described it goes dim after 5-10 seconds. am I doing this right? I wasn't sure if I had adjusted the value correctly.
M
I have searched all over can someone tell me how to get the \silent to work I have taskmanager v2.9 spent the last 2 hours trying to get this to work please give a bother some help
I think the answer is here...well, not an answer but at least an app that claims to do what you're looking for.
This answer may be too basic, but have you tried changing the registry edit and then NOT doing a soft reset, but instead doing a full power off/on? Some registry entries WON'T stick with a soft-reset, but will with a power cycle. The power cycle gives the OS a heads up that it's being turned off and writes things more permanently...
pkley said:
This answer may be too basic, but have you tried changing the registry edit and then NOT doing a soft reset, but instead doing a full power off/on? Some registry entries WON'T stick with a soft-reset, but will with a power cycle. The power cycle gives the OS a heads up that it's being turned off and writes things more permanently...
Click to expand...
Click to collapse
I always power cycle after a reg change (It forces a registry write and a SR doesn't) but it doesn't matter...this reg change doesn't stick after a power cycle for some reason.
EDIT:
BTW, I loaded BrightLock and it works perfectly.
Excellent seems to do what i needed!!! Cheers
David
Fitipaldi1 said:
I think the answer is here...well, not an answer but at least an app that claims to do what you're looking for.
Click to expand...
Click to collapse
snowgum said:
strange thing. When I adjust this value it messes with my backlight timeout. I normally have this set to 30secs, i.e. the screen goes dimmer after 30 secs. When I adjust the lockout value as described it goes dim after 5-10 seconds. am I doing this right? I wasn't sure if I had adjusted the value correctly.
M
Click to expand...
Click to collapse
I am experiencing a similar issue. My normal backlight on battery power is set to 1 minute, but after installing brightlock, it keeps changing to 10 seconds. I really like what brightlock does for me, but not at the cost of dimming the screen when I am trying to read something. Is there a configuration I am missing?
I think I got rid of this annoying “dim” problem without .lnk file and scripting.
See my next post.
Is there a way of stopping the screen from being so dim when i press the power button
I think I got rid of this annoying “dim” problem without .lnk file and scripting.
What I did is the following:
1. Downloaded and installed Taskmanager 2.9 from: http://www.dotfred.net/TaskMgr.htm
2. Opened Taskmanager and went to Regedit
3. Deleted LockLevel folder from HKCU\ControlPanel\Backlight\LockLevel
4. Saved
5. Rebooted the phone.
After rebooting, system recreates LockLevel folder, however, “dim” problem is gone.
Unit still dims the screen, but pressing any key triggers the bright display.
Suggestion: Export registry and backup your device before playing with Regedit.
can some one please re-post brightlock? mediafire link seems to be done and this is doing me nutter
Hi,
first...excuse me for my very bad english!!!
I have the following problem: after installed some programs the display remain always powered on also after many minutes.
I think that some parameter in the registru have been chanched.
Someone know how can I resolve the problem?
Thanks!
Doc
After watching something in TCMP player I have that issue sometimes. The screen just wont go back to sleep. I fix it by going into the start menu > settings > power options, usually just going in there and back to the home screen will reset it for me. However when I first installed it I had the time out options set pretty high and it did not always power off after installing stuff. I lowerd those and have not had a problem since.
Could be a different problem though, what program did you install? What changes to the phone have you made?
this is a knows bug in the s710 and s730. programs like tomtom and TCMP player change the Display key to a high value and reset it to the previous. Th eproblem is the key doen't exist on there phones.
search for the backlight-bug in the s710 forum.
start menu > settings > power options > ok, then you have reset all parameters
Regards
If the light goes off, but the display stays on, you must lock your keyboard, display goes out after some time that way(like you've set in the "settings" menu).
look here:
http://forum.xda-developers.com/showthread.php?t=303778
To solve the problem get a registry editor and do the following:
HKCU / Control Panel / Power => values => LockLevel then you open the values and set "Display" to 30 (30 equals 30 seconds).
domenicostorino:
Thanks. I hope this finally helps.
Unfortunately the display's again on. "Display timeout on battery" and "Display time out on AC" are again (automaticaly) set to 30 seconds and the display doesn't go off.
Thats really weird, without changing anything on mine once I exit the Core or TCPMP player I just load the power options and click done, just going in the menu resets my phone to normal power off functions.
I wonder if in the regestry its not actually locking in the change like the call beep...
This is a summary of Diamond tweaks collected from various threads on XDA and from people's contributions. Thanks to all who discovered the Tweaks (not mentioning by name because there's too many to mention and all I did is aggregate). This is a collective effort so let's keep the list growing!
thread. Let's keep the comments in the Warning: Be sure you know what you're doing and read around the Diamond forums to see where others have run into trouble and with which tweaks on which ROMs. Many people have had to Hard Reset their devices while others have had no problems so read up!
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "1" (FIXED: thanks KuKuRiKu and everyone)
5. Change CallWaiting Tone --> HKLM\Software\HTC\PHONE : by default set to \windows\waitingtone.wav by default. change to anything else
6. Boost TFL3D Scrolling Speed --> - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 or 32768 (DWORD decimal)
- To change it back to the default: - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
7. To do a Hard Reset, with the phone ON, hold down the Volume Down and Enter (round navigation) keys and press soft reset while they are pressed
8. Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall to 0 (Note: does not work on all ROMs)
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
9. Downlod original CONTENT folder (Wallpaper, VIDEO, MUSIC) here http://rapidshare.com/files/121271047/CONTENT_Internal_storage.rar.html
10. Set HTC Album X button to close not minimize:ok_minimize change value to 0
11. Disable Enlarged Title bar (when you click on a notification) to the default WM behavior: HKLM->Software->HTC->EnlargeTitleBar - and change "Enable" from 1 to 0.
12. Turn off startup aninmation and sound: HKEY_Local_Machine\Software\HTC\HTCAnimation\ -> rename both "StartupGif" and "StartupWav" to other names
13. Enable GPS photo: HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1
15. Another supposed TFL3D tweak for better performance: HKLM\Software\OEM\TFLOSettings:
SpeedHigh: default value (25) <-- Change to (5) / SpeedLow : default value (70) <-- Chnge to (14) save and soft reset
16. Adjust screen sensitivity: HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027 or 34 to dword:000000f0 or 240 in decimal
17. Lightsensor Switching the Screen off- realised by yelitterulez, confirmed by pietrucci and tested by myself. When making a call the screen stays on if you leave the phone lying flat on a table. If you wait 10 seconds into the call, you can pick it up to your ear and the screen stays on.
BUT if you make a call with the phone slightly tilted/ slanted (you get the idea), the screen turns off as soon as the call gets connected!
The moment you hold the phone to your head the blacklight turns off. In fact: the moment you hide the screen with anything it turns off! (try your hand...).
This might be the reason why everybody's complaining about the screen turning off during a call: you hold the phone to your head! When you turn the screen back on manually, it stays on no matter if you hold your hand or head...
18. Automatically lock your Diamond --> HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
19. More Camera Modes:
To Enable 'Burst': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P6 -> change the value "enabled" from 0 to 1
To Enable 'Sport': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P8 -> change the value "enabled" from 0 to 1
To Enable 'Video Share': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P9 -> change the value "enabled" from 0 to 1
20. Delay device autolock: HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockTimeout -> Change the Dword value (30 = 30 seconds, etc)
21. Enable Manual Screen Rotation (Portrait/Landscape): HKLM - System - GDI - Rotation - HideOrientationUI (change from 1 to 0)
22. Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
23. Show Weekday in TFL3D (thanks to pulp) - download and install http://rapidshare.com/files/127174792/weekday.cab
24. Enable HSUPA:
HKLM\Software\HTC\AdvancedNetwork\SupportHSUPA =change it to 1
25. Enable Audio Booster without headset-->HKLM/System/State/Hardware/Headset set the value to 1 (soft reset will bring it back to 0)
26. Add a Call History tab to TF3D (discovered by sushilange, spread by Fabliv) --> http://forum.xda-developers.com/showthread.php?t=410180
27. Add new Cities to TF3D http://forum.xda-developers.com/showthread.php?t=408918 - thanks to R. DevilR
28. Remove orphan icons and shortcuts - http://forum.xda-developers.com/showpost.php?p=2461697&postcount=3
29. Four icons in a row in WM Programs/Settings screens - http://forum.xda-developers.com/showpost.php?p=2462244&postcount=16
30. Remove Vertical and Horizontal Scrollbars
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 0 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxVScr = 0 (DWORD decimal)
31. Remap Manila softkeys:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
HKEY_LOCAL_MACHINE\Software\HTC\HTCAlbum :
32. Change system and context menu font size:
HKEY_LOCAL_MACHINE\system\gwe\menu\popfnt
and change the value for the "Ht" entry to "1000" decimal (from 1200)
33. Increase maximum picture size when shooting in Burst and Sports mode:When activating "burst" and "sport" the max size of the pictures is "L" but if you change:
HKLM\SOFTWARE\HTC\Camera\P8\MainCamCaptSize value to 1024
and
HKLM\SOFTWARE\HTC\Camera\P8\MainCamSupportCaptSize to 1744Do the same for P6 and you can now shoot in these modes up to 3M and not just L - thanks to nnevynn for
34. Get Blackberry Connect working on your Diamond!! (thanks to cybertech99)
http://rapidshare.com/files/114522380/BBConnect_WM6_Profession.cab
35. Disable Diamond Phonepad Skin
HKLM -> Security -> Phone -> Skin -> Enable (set 1 to 0), then reset.
36. Enable Better Power Management
HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class
Set DisablePowerManagement = 0 (default=1)
nice one on the sms wake. We should expand the list! THanks!
Update:
Thanks for updating the list!
Since I don't see a tweak for Disabling SMS Conversation (The costly SMS Chat) I will post it here!
Disable SMS Conversation in WM 6.X
In Registry Editor: Create a folder named "OEM" in "HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings"
In the new "OEM" folder, make a new DWORD key called "SMSInboxThreadingDisabled" and give it a value of "1"
That will disable the SMS conversation. When you click on the messages on the SMS tab on TF3D, it will take you to the normal SMS inbox instead.
Hope it helps
thanks a lot, keep going please
Great!
This is very useful and it helps solve a lot of problem. Will the cache size change make the D unstable?
For some they say it has...but for me, my device is running great!
mkhattab said:
This is a summary of the proven tweaks taken from the Diamond Tweaks thread. Let's keep the comments in the Diamond Tweaks thread and keep this one as a list of the actual tweaks only to be an easily accessible summary. Thanks to all who discovered the Tweaks
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
5. Change CallWaiting Tone --> HKLM\Software\HTC\PHONE : by default set to \windows\waitingtone.wav by default. change to anything else
Click to expand...
Click to collapse
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
saveferris said:
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
Click to expand...
Click to collapse
I had the exact same problem, wouldn't recommend this one.
saveferris said:
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
Click to expand...
Click to collapse
Yes, I had same problem.
Hmm afaik 'File system cache' in 1) is the same as the key HKLM\System\Storagemanager\Fatfs\cachsize in 2).
So tip 1 sets it to 8mb, and tip 2 changes it from 16mb to 32mb. So that suggests its 16m to start with?
Sounds like the file system filter cache is whats making the main difference. Thats this key:
HKLM\System\StorageManager\Filters\fsreplxfilt\Rep lStoreCacheSize
Can someone maybe post the original values of these two keys?
someone1234 said:
Hmm afaik 'File system cache' in 1) is the same as the key HKLM\System\Storagemanager\Fatfs\cachsize in 2).
So tip 1 sets it to 8mb, and tip 2 changes it from 16mb to 32mb. So that suggests its 16m to start with?
Sounds like the file system filter cache is whats making the main difference. Thats this key:
HKLM\System\StorageManager\Filters\fsreplxfilt\Rep lStoreCacheSize
Can someone maybe post the original values of these two keys?
Click to expand...
Click to collapse
There are 3 values to be changed.
1. The Icon Cache which is suggested to be changed to 131072. The registry setting is:
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00020000
The value is shown as hexadecimal, which is equivalent to 131072 in decimal.
2. The second value is to be changed in FAT File System cache.
3. The third value is to be changed is Filters File System cache.
The cache sizes in #2 and #3 are usually kept same, for example 32768 decimal (32MB). Though, this eats up a lot of memory, but makes the system very fast. Lately, I have seen in KaiSer and Universal that these values are set as dynamic values.
Hope this is helpful.
KOR!
anyone know which registry key can make the phone not blank the screen when answering call?
lwclam said:
anyone know which registry key can make the phone not blank the screen when answering call?
Click to expand...
Click to collapse
Yeah, people do know. Search for it.
Just read about a 'tweak' in another thread. It seems disabling "GPRS auto attach" in Advanced Configuration Tool helps in preserving battery live.
Read about it here: http://forum.xda-developers.com/showthread.php?t=395301
For me turning that option to off would be best solution as well. Even more so if it really helps save the battery.
Since I don't have a Diamond yet I havent gotten a chance to actually test this tweak.
Another thing I've found eats up a lot of battery life is the schedule to check email. I have my Direct Push set to an Exchange account and a second Internet Email account. Changing the frequency of checking the second account really makes a difference.
mkhattab said:
Another thing I've found eats up a lot of battery life is the schedule to check email. I have my Direct Push set to an Exchange account and a second Internet Email account. Changing the frequency of checking the second account really makes a difference.
Click to expand...
Click to collapse
agree. my setup is similar to you. i was using 10 mins to check my second IMAP account, i have only around 9-10 hrs standby time. Now, i changed that IMAP account to check in every 60 mins, now, standby time is extended to more than 12 hrs.
what was the previous default File system cache and file system filter cache setting, cause my phone has slowed down since i have changed it. please reply back to me as soon as possible. thank you
http://forum.xda-developers.com/showthread.php?t=397935&page=8
posts 75 and 76
Thanks alot for the fast reply, and just one other question did any one arabize the diamond cause i have tried but it says installation not done. Thanks again man
sorry guys...noob question
to get the SMS to wake up the phone,
where is the HKLM folder in registry?
wishmaker738 said:
sorry guys...noob question
to get the SMS to wake up the phone,
where is the HKLM folder in registry?
Click to expand...
Click to collapse
Read the first post in this thread!
I've noticed this with all the custom rom's i've tried, is this 'normal' for the diamond?
basically, what i'm talking about is within the phone dialer screen, above the number keypad is the list of recent calls + contacts and to the right is the scroll bar but that scroll bar is 2/3 cut off, making it useless.
is this normal? i tried searching to no avail.
ive been searchin for this for a few days aswell, when i came across ur post and realised that they were in fact just cut off.... i thought they were implemented like that! anywho, playin about with these values u can either remove it completely or get it back
Remove Vertical and Horizontal Scrollbars
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 0 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\ = 0 (DWORD decimal)
Slight graphical distortion at the edge of the screen, but they are gone
------------------------------------------------------------------------------------
After playin about with the values, ive come to the conclusion that for me, personally, setting the cxVScr value to 13 is the most efficent as it leaves the scrollbar for important apps like RegEdit where you will use the scrollbar at times, but does not display the scrollbar in the dialer leaving it looking clean
hope this helps man
well, i want the scroll bar to show but i'll play around with those values and see what it does. thanks!
ok, those registry settings just change the width of the scroll bars but doens't help the fundamental problem which is that the scroll bar is cut off no matter how wide it is.
i just realized though that i can use the smarttouch (rotating my finger over the circular button) to scroll through without trying to do it with that scroll bar, so hopefully this helps someone.
my d2 touchcreen seem;s to need more power instead of my brother's iphone 3g screen...can i make my d2 screen feels the same?????thanks
the D2 is a resistive touch screen, iphone is capacitive, capacitive ill always be more sensative, but, resistive is cheaper and more tried tech, and you can use with gloves or styleus etc lol.
aka
no, not really.
but you can use advanced config 3.3 to change the respsonse behaviour, the pressure to use the touchscreen etc
You can also adjust the screen sensitivity etc. using Diamond Tweak (Diamond Tweak 0.5.3_English.cab)....this app works well on the D2.
Change the following reg. keys:
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)
cyron_at said:
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)
Click to expand...
Click to collapse
Can't find this one-- "FingerPressure"
Do you mean changing the "PressureThreshold" value to -1?
Thanks
cyruslam said:
Can't find this one-- "FingerPressure"
Do you mean changing the "PressureThreshold" value to -1?
Thanks
Click to expand...
Click to collapse
..here the complete thread:
http://forum.xda-developers.com/showthread.php?t=469865&highlight=FingerPressure
HKEY_LOCAL_MACHINE\Drivers\TouchPanel, item DWORD PressureThreshold, set up value 000000f0 (original 00000027).
what is hkey_local....where is this??i can find it anywhere...??help....
You will need some registry editor. Such as this one
I just got my D2 yesterday.
One problem I have is that, when I am scrolling up/down the screen which contains multiple entries (such as the Setting's page or All contacts), when I swipe my finger or stylus across the screen, one entry is frequenctly selected as a result of the swipe gesture.
Is there a way to change to double tap to select an entry, or otherwise 'strengthen' the sense its a swipe not a tap?
Connor.McLeod said:
I just got my D2 yesterday.
One problem I have is that, when I am scrolling up/down the screen which contains multiple entries (such as the Setting's page or All contacts), when I swipe my finger or stylus across the screen, one entry is frequenctly selected as a result of the swipe gesture.
Is there a way to change to double tap to select an entry, or otherwise 'strengthen' the sense its a swipe not a tap?
Click to expand...
Click to collapse
Found out in the contact manager, if I swipe and hold my stylus on the screen briefly after swiping , the entry is not selected.
Will do the same with the other applications. Hopefully the same trick works.