Calibrate the screen over and over again.. - Touch Diamond, MDA Compact IV General

Since yesterday i had some problems with my diamond. First the screen acted weird. And now i tried to reinstall mij original rom and custom roms..
Everytime i start the phone i have to calibrate the screen (uitlijnen in dutch), when i finish it it starts al over again. And it never ends..
I had a custom rom, but i flashed the original and the problem still occurs. So i dont think its the rom.. The phone got wet (not extremely wet but it got wet on the outside (dont think it came in the phone but i'm not 100% sure).
So did the water destroy something in the phone, or is it a software problem.. and can i return the phone to the shop if i flashed back the original rom or did i loose mij warranty??
Please help me.. feeling kind of desperate.

Related

ah help! touchscreen not rsponding!

my touch screeen of my phone stopped responding this morning iv tried flashing a new rom to see if it was the rom that was the problem cos i use custom roms alot. i had been using itje's touch it leo 4.2 rom with the new fullscreen horizon when this morning i was using it fine... put it in my pocket got it out again about 10mins or so later to listen to some music and nothing was responding. thinking this was just the phone freezing for something as i have only begun using itje's rom since last night i turned the phone on and off again tried a hard reset. and have just tried re flashing the rom to see if itwould work but the rom flashed fine and touch screen was responding until i got to the part where u tap here to setup device at the very start of devide setup... and then nothing again... but it was responding earlier when the rom was preparing the device for setup as it displayed the "touch it" logo on the screen when it booted up and when the screen went dark i touched the screen and it lit up again.....
any ideas ppls? any help would be greatly appreciated i love my X1i and would be horrified if i had to fork out another 1000AUD to get a new one
i just tried flashing the latest stock rom. flashes fine... and again the touch screen responds fine until the "tap the screen to set up your device" screen appears, until that appears, when the screen goes dim i can touch it and it goes bright again fine... but when that screen comes up it doesnt respon at all not even to turn the backlight on... AHHHHHHH help please i cannot even send this away to warranty as the phone has been flashed and has custom roms been used on it and custom spl
i have thoroughly searched on this subject and nearly all cases are caused by water damage.. but i have never taken my phone near water nor has anything been spilt on it... t has been dropped a few times but not for the past couple of months... and this only happened this morning
bludsuka said:
my touch screeen of my phone stopped responding this morning iv tried flashing a new rom to see if it was the rom that was the problem cos i use custom roms alot. i had been using itje's touch it leo 4.2 rom with the new fullscreen horizon when this morning i was using it fine... put it in my pocket got it out again about 10mins or so later to listen to some music and nothing was responding. thinking this was just the phone freezing for something as i have only begun using itje's rom since last night i turned the phone on and off again tried a hard reset. and have just tried re flashing the rom to see if itwould work but the rom flashed fine and touch screen was responding until i got to the part where u tap here to setup device at the very start of devide setup... and then nothing again... but it was responding earlier when the rom was preparing the device for setup as it displayed the "touch it" logo on the screen when it booted up and when the screen went dark i touched the screen and it lit up again.....
any ideas ppls? any help would be greatly appreciated i love my X1i and would be horrified if i had to fork out another 1000AUD to get a new one
i just tried flashing the latest stock rom. flashes fine... and again the touch screen responds fine until the "tap the screen to set up your device" screen appears, until that appears, when the screen goes dim i can touch it and it goes bright again fine... but when that screen comes up it doesnt respon at all not even to turn the backlight on... AHHHHHHH help please i cannot even send this away to warranty as the phone has been flashed and has custom roms been used on it and custom spl
i have thoroughly searched on this subject and nearly all cases are caused by water damage.. but i have never taken my phone near water nor has anything been spilt on it... t has been dropped a few times but not for the past couple of months... and this only happened this morning
Click to expand...
Click to collapse
anyone? could anyone at least tell me how to restore stock spl without getting into device centre? thanks...
Me to..
hi bludsuka i 've got the same problem mine no responsive at all tho i looked on my advanced config before i hard reset it back to factory settings and it was set at custom i tried to put it back to default but i couldnt change it with just the keyboard and buttons. Now im stuck on the damn wm6.1 screen too, im gutted i paid like £220 3 weeks ago and now i cant do anything with it. im stuck with what to do apart from send it to my nearest service center. i would send it back but i bought it off of ebay so i dont know how i stand with the warranty inlcuding the fact ive flashed it back to generic firmware and ive also got cracks in my case. im gona email SE now.. i'll let u know how i get on.
b-m-b-85 said:
hi bludsuka i 've got the same problem mine no responsive at all tho i looked on my advanced config before i hard reset it back to factory settings and it was set at custom i tried to put it back to default but i couldnt change it with just the keyboard and buttons. Now im stuck on the damn wm6.1 screen too, im gutted i paid like £220 3 weeks ago and now i cant do anything with it. im stuck with what to do apart from send it to my nearest service center. i would send it back but i bought it off of ebay so i dont know how i stand with the warranty inlcuding the fact ive flashed it back to generic firmware and ive also got cracks in my case. im gona email SE now.. i'll let u know how i get on.
Click to expand...
Click to collapse
Thanks heaps for your response, i also bough mine off ebay and have also flashed it many times. tho i have managed to restore a stock rom and the stock spl so i think i should be right for warranties.. only thing that could let me down is cracks in case they could say its been damaged by myself and make me pay for it. i sure hope not. let me no how u go. i emailed them and they have told me to hard reset which i have and they said to ring them... il wait to hear back from u before i reing them tho..
i dunno if my invoice will be ok for warranty either its a shipping invoice from DHL and doesnt have the IMEI no. on it anywhere as far as i can tell. i have emailed the ebay store i bought it off (personal Digital) to see if i can get a propper invoice but have had no response...
best of luck with yours. let me no what they say
bit late.
elo quick reply sorry i took so long, sent it back. SE customer service was a great experience for me. dare i say it, didnt need a receipt or any proof of purchase and just sent the phone. no rear casing, no memory card, no battery, they completely fixed the screen problem and replaced my shiny chromed bit of the phone cus it had a scratch on and i got it back it a yellow sony ericsson box saying "i love reunions" on it. overall a great service, considering what problems other have had.. go get an X2 or a X10 snapdragon mate take care - b

Hd losing screen alignament?

Hi
i have dutty's holly r0 sense 2.1. i've been using it for a while now, since it appeared, no problems. but a few days ago i noticed that the scrren alignament wasnt so good, but i didnt think it was a big deal, it was not such a big error. today i opened my phone trying to make a call and the error was of about 3 cm. i mean, to press start, i had to touch under the clock!!
and i couldnt get into any problems because the buttons in the lower side of the screen could not be pressed
i could not even make a backup of the phone
i hardresetted, but it didnt solve anything. i flashed duttys r14 and same problem, i almost thought it is dead
i flashed then an original rom, first it worked, then the error started to appear again
i did a screen alignament and now it seems to be ok?
has anyone encountered this problem before? is my hd dying?
thx
Got the same problem here. Looks like the screen connection is buggy. its gonna have to be send in for repairs
you mean hardware? ( i dont have warranty anymore
for nintendo ds you can try cleaning the screen near borders with a teethbrush . it should be a solution! try
what do you mean clean it with a toothbrush?? it isnt dirty (
I had the same problem, but only after i dropped the phone on the street a few times. I hard-resert it a few times, it would work shortly then not respond or respond with 2-3cm wrong press. Cpuldnt even calibrate the screen after reset.
I sent it back to HTC under warranty, and they changed the screen, bazel, front facia and god knows what else. It was all new apart from back plastic cover.

I9000 after a swim.

Ok, not after a swim, but the phone got some water in its housing, dont know how, but atleast the battery was discharged completely. Home button didnt work, audio was weird, took the phone apart, cleaned everything i got my hands on with some vodka and thats all good now. Got only one problem now, when somebody calls me, the phone.android process stops working, i can rarely answer a call, but i can call people woth no problem, except i cant hang up, because the menu isnt shown. Did a complete new install, and than the problem dissapeared a bit, but now its back, what could be the problem? Could it be the proximity sensor? Not sure, but it seems its not working. Thanks!
Doing a fresh install of your Firmware could solve the error. How did u cleaned/dried your phone?
Sent from my GT-I9001 using xda app-developers app
Pulled out the battery and when i got home (5 hours later) teared him down, there wasnt much water, i think it was condensated, left it to dry and soaked up all the soakable. I did a clean install, even formatted thr internal card, but i did restore a few apps, maybe this glitch is just a software issue? Or maybe the AOKP rom is glitchy? Although the previos was CM9 and still the same glitch, should i try to do a clean install without restoring anything?
hmm water may be the reason of several problems for te future (it really works)
if a phone gets wet put out the battery
dont try to power it on it would destroy ure phone
take a little basket and fill it with rice put ure phone in it so that it is coverd with the dry ( not coocked ) rice and wait 2-3 days afterwards have a try

[Q] [HELP] Problem whit my NOTE

When I use my phone a little longer time. He starts heating up around the camera. After that they start streaking across the screen until I do a hard reset. And then after that I have to leave it switched off mobile phone to cool and then it can be reused. But when I'm in some places colder wants a cell phone to function normally at all times. It has a new battery. Because it's the same thing with the old. I have the original rom on it. It is the custome rom, but returned to the original. And it's always the same story ... Please help.:good:
mattesiri1 said:
When I use my phone a little longer time. He starts heating up around the camera. After that they start streaking across the screen until I do a hard reset. And then after that I have to leave it switched off mobile phone to cool and then it can be reused. But when I'm in some places colder wants a cell phone to function normally at all times. It has a new battery. Because it's the same thing with the old. I have the original rom on it. It is the custome rom, but returned to the original. And it's always the same story ... Please help.:good:
Click to expand...
Click to collapse
What android vers is your ROM? I experienced that in stock ICS 4.0.4. Do you know how to use odin? Might just want to reflash the stock rom again.

z3c dead screen... help!

hello all,
two days ago i flashed the norwegian lollipop ftf to my US unbranded z3c. it was working amazingly, my 4g and wi-fi problems seemed fixed. it was the happiest i've been with my z3c since i got it in november. However, i was using my phone as normal and i saw the screen flicker in a strange way then it went black! i can hear all of my notifications going off but nothing from the screen. I repaired via PC companion and nothing. I have a protection plan so i have a new z3c on the way. So here's my question, during this day i only did two things out of the ordinary to my phone:
1) i installed 5.0.2 ftf ( which i highly doubt caused this, but still scared to flash the norwegian again... should i be scared?)
2) and this is really stupid so please dont be too mean to me.... my phone got really hot after the update so i put it in cold water to cool it down. the phone worked for about an hour after that then the screen went.
does anyone have any advice to possibly save my phone and not have to use the protection plan yet?
im scared to flash ftf again because im not sure what caused this
thank you !
Probably water damage. Turn phone off, open flaps, put in sealed bag of dry rice for three days. Don't mean to be a scaremonger, but unfortunately sounds like the damage may be done already.

Categories

Resources