Turn off T9 by default - Touch Diamond, MDA Compact IV General

Hello,
I used the search and Google to look for an option to turn T9 off, but I couldn't find anything. I'm currently using the Full QWERTY keyboard on my MDA Compact IV and by default it has T9 on, which I really don't like. Every time I start writing a text or something else I have to switch to the ABC mode.
So basicly my question is: Is it possible to change the default setting of these modes? T9 is on by default, but I want to be off by default and ABC mode on by default. I hope someone can help me.
Also on another note, is it possible to show 'Tasks' in the start menu instead of just 'Calendar'. Now I have to click on 'Start', 'Calendar' and after that on 'Tasks'. I just want it to be right there. I'm by the way guessing those are the menu names, since I'm using a Dutch version. It's called 'Taken' and 'Agenda' on my phone.
Thanks in advance.

*bump*
Doesn't anyone know how to do this? Is it even possible?

Same here...is there somebody who knows a solution????

Really NOBODY?????

I've been trying to look for an option to change in the registry. So far I haven't been able to find anything. So, is there someone else out there who knows how to help us ?

There is a cab file here for disabling t9, the problem is that it doesn't disable only t9 in full qwerty, but in all the keyboards, and on the standard keypad version you only get numbers. not very convenient...

mean-machine said:
There is a cab file here for disabling t9, the problem is that it doesn't disable only t9 in full qwerty, but in all the keyboards, and on the standard keypad version you only get numbers. not very convenient...
Click to expand...
Click to collapse
And by the standard keypad you mean the keypad of the actual phone? That's not convenient at all. I wouldn't removing T9 from all the keyboards though. I have never used it and probably never will, since I just don't like it.

To disable XT9 Windows Mobile:
Go to HKLM\SOFTWARE\Tegic\eT9\ and change the key "XT9SupportMSSip" from value from "1" to "0".
Works on my diamond, hope this is what you're looking for

capdew said:
To disable XT9 Windows Mobile:
Go to HKLM\SOFTWARE\Tegic\eT9\ and change the key "XT9SupportMSSip" from value from "1" to "0".
Works on my diamond, hope this is what you're looking for
Click to expand...
Click to collapse
Hm, that didn't work for me. It was also on "0" for me by default, so I tried setting it to "1". That didn't work for me either.

Hi guys,
to turn off T9 by default change the value:
HKLM\Software\Tegic\eT9\IME\CarrierDefaultTextMode
from "1" to "0"

kasikm said:
Hi guys,
to turn off T9 by default change the value:
HKLM\Software\Tegic\eT9\IME\CarrierDefaultTextMode
from "1" to "0"
Click to expand...
Click to collapse
Wow, thanks a lot kasikm! That's exactly what I wanted!

What I would like is the opposite...I would like T9 active by default. I use Compact QWERTY and sometimes T9 is on and sometimes it isn't.

Related

Word Completion does not work!

Hi there, i use the block recognizer a lot to compose SMS messages and on my old touch the word completion feature worked like a charm. However, no matter what settings i use on the diamond (e.g. suggest 3 words after 1 letter etc.etc.) this feature doesn't come up!!
Does anyone have the same issue, and any fixes for it?
I got the HTC touch on the first day it came out and haven't had any problems with it whatsoever. My diamond has been full of issues since day one!
Maybe stupid...
Did you check in the settings if word completion is active?
Yes, the option is definately switched on....but no luck in actually completing any of my words!!
I have the same problem with my Spanish ROM using the "standard / classical" keyboard
Help, please!
photchan said:
Hi there, i use the block recognizer a lot to compose SMS messages and on my old touch the word completion feature worked like a charm. However, no matter what settings i use on the diamond (e.g. suggest 3 words after 1 letter etc.etc.) this feature doesn't come up!!
Does anyone have the same issue, and any fixes for it?
I got the HTC touch on the first day it came out and haven't had any problems with it whatsoever. My diamond has been full of issues since day one!
Click to expand...
Click to collapse
You are correct. I complained about this in an earlier thread. I am using the latest ROM and it does not work.......
Doesn't work for me either!
Doesnt work for me either. On my Tytn I choose to create a new message and when I start to type the contacts name for the To field it lists the contacts for that letter so I can select the correct one. Then for the message it will suggest words as I type, this is exactly what I want on my Diamond. I dont use T9. The nearest I can get on the Diamond is if I have "Word completion in ABC mode" ticked in the T9 Settings box then word suggestion works but it doesnt suggest contacts for the To field when creating a new message, instead it suggests words. This is not how I want it
Same problem....
I have the same problem, but only when I use the Block recognizer, using the keyboard works fine, but I'd rather use the block r... so when I need to list the contact I place the names and when I press send the phone give me the choice to select the right contact...
you need to disable xt9, then autocomplete will work again
Use something like KaiserTweak or Boinger's diamond config to change
Hi there, I try to create a cab file which can enable the word completion function for MSFT IME ( Block Recognizer / Keyboard / Letter Recognizer ).
Have fun~
http://rapidshare.com/files/133542391/Add_MS_Qwerty_Keyboard_WC.cab.html
I'm new to this level of use - I have had Win Mobile for years, but only yesterday did my first ROM update! How do I disable T9? I'm desperate for word completion on block recogniser (the only way to input!)
SOLVED
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
beemerTPPC said:
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
Click to expand...
Click to collapse
It Worked!!!! ur a genius thx a million bro
Thank you for this - it worked beautifully!
Thanks to you, it worked like a charm
Nope it does not work perfectly. After that change, word completion only works for letter recogniser, but it does not work for the phone keyboard, compact qwerty, anything that uses the phone keypad.
The HTC keyboards all use T9 word completion, this thread was for the MS keyboards/input methods.
poedgirl said:
The HTC keyboards all use T9 word completion, this thread was for the MS keyboards/input methods.
Click to expand...
Click to collapse
Do you know maybe a solution to have word completion in ABC mode also for HTC keyboards?!?!
Thnx
Urosh
I tried it... It is working perfectly good!!! Thank you very very much.
Changed my registry settings as suggested on my HTC Diamond and it worked perfectly fine. Thanx a lot. I really missed this.

keyboard stuck in numbers/symbols mode

Something very weird is happening on my Diamond. Suddenly my on screen full querty keyboard is stuck in the numeric mode and hitting the "ABC" button won't go to the normal mode where you can type letters. If I change to other type of keyboard, for example the Phone Keypad, it'll also type only numbers not letters, no matter in what mode it is.
I've tried soft reset but the issue persists. Last app I installed was Mobile Justice but I don't think it has something to do with the issue...
Anyone have seen this before? any suggestion besides hard reset?
Yes, I had same problem and found out that it was caused by the installation of a custom T9.cab file (Dutch). I uninstalled it and problem was gone.
hbieshe said:
Yes, I had same problem and found out that it was caused by the installation of a custom T9.cab file (Dutch). I uninstalled it and problem was gone.
Click to expand...
Click to collapse
Aha, I think I installed one of those cabs a few days ago as well, but how do you uninstall that? it doesn't appear in the add/remove programs window.
how dod you guys fixed it? got same problem
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
thanks mate appriciated. worked perfect.
I exp it. I found out that. Restored or copy contacts before customize the keyboard and it works like normal
etenx500 said:
I exp it. I found out that. Restored or copy contacts before customize the keyboard and it works like normal
Click to expand...
Click to collapse
Also I found out that: Disable xt9 it after copy contacts or restore contact it work like normal but if you add a contact the keyboard will stuck again at symbol mode.
I hope some want know how to fix it.
CHeers
This has been bugging me for around two weeks now since installing SensorLock (which could be a coincidence) - but now solved with the registry tweaks.
thank you very much!
I've been created the cab attacched.
This fix the regkey modified.
vulkanxxv said:
I've been created the cab attacched.
This fix the regkey modified.
Click to expand...
Click to collapse
Im having a problem like this in the kaiser.... would this cab work there as well? or this changes are specific for the diamond?
studz said:
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
Click to expand...
Click to collapse
Works for HTC S730 but only HKLM part..there is no CLSID with that ID but nevermind.
Thanks !!
studz said:
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
Click to expand...
Click to collapse
Thanks I'd been searching all over with no luck but this works for me.
it works
studz said:
Try this:
Go into the registry and ensure the following settings, then soft reset.
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME"
Ime File to "\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"
Click to expand...
Click to collapse
Thanks, dude!
For HTC Jade works too!
It is enouth to change just "Layout Text" and "Ime File" keys
RR33 said:
hi,
For those, like me, who are not familiar with registry editing, I found a simple way to fix that bug : launch "Diamond Tweak", go to SIP configuration then "deactivate" T9, press "ok" and soft reset. it will be fine now !
regards,
Click to expand...
Click to collapse
Thanks.. this has been bugging me on my Blackstone like crazy!!
The equivalent is to launch HD Tweak, then deactivate "T9 mode" from 20. Keyboard (SIP) section.
thnx a ton mate
this thin has been bugging me since long time thnx a ton for the tweak u rock !!!!
Sticking Keyboard
Thanks to R33, works a treat
RR33 said:
hi,
For those, like me, who are not familiar with registry editing, I found a simple way to fix that bug : launch "Diamond Tweak", go to SIP configuration then "deactivate" T9, press "ok" and soft reset. it will be fine now !
regards,
Click to expand...
Click to collapse
This has been a problem on my Diamond for months. I have been putting up with it and avoiding txting. Now I have done this and it has fixed it. Thank you!
Thanks!
Thanks so much guys, I had the same problem, already installed other keyboard, then it was fine for a few hours/days and then I had the same problem even with the new keyboard. But now with changing the registry entry it seems to work, so a big THANKS!!!

Input settings problem

Hi Guys
Sorry if this has been posted, I did do a search and couldn't find a solution.
Whenever I change the input type in the input settings, it immediately defaults back to compact qwerty when I go back in to look.
Is this a known problem?
Thanks in advance
Nobody have any ideas?
After flashing the new ROM i've the same problem.
Every time i switch the keyboard layout, it automatically returns to compact QWERTY.
Can the layout be set in the registry?
I haven't found any solution yet.
fixing the default imput method
I also had this problem and it was driving me mad! However, searching the forum I came across a recommendation to use a little program called SIPchange. I installed this (it's free!) and it allows you to set any imput method as the default. So far it seems to work.
The only problem I now have is that the Letter Recogniser doesn't show me any suggested words as I enter text, despite this option being switched on in the settings. Any ideas anyone?
Richard

Disable t9, new official rom

Can't disable t9. Tried make hklm/software/tegic/et9/ime/carrierdefaulttextmode=0, no effect.
Bored pushing Fn-Space-3-1-Fn-Space-2 just to change the language.
hmm... looks like it is sooo difficult, that no one can even answer...
Hmm serg146, in your first post is it to disable t9 or to change the default language??? Because to change the default language isn't too difficult.
Ok, may be my english not good at all, i'll try again...
Every time i want switch layout to another language(layout?) (rus/eng) i had to press 7(seven) keys: Fn-Space-3-1-Fn-Space-2. Last 3 keys switching xt9 mode to ABC. I'm totally hate t9 and never used it, i've got qwerty keyboard, i can't get what for t9 there. But i have to switch it off every time.
So, i want my phone to switch language(layout) by less key presses. At least 4. That's why ABC mode should appear instead of xt9 after switching language (layout).
hklm/software/tegic/et9/ime/textinputmode=0
Regards,
Molski
molski said:
hklm/software/tegic/et9/ime/textinputmode=0
Click to expand...
Click to collapse
already set, don't work.
Hhhmmm...strange, yesterday I changed this value and T9 was gone on my Wings. Are you sure the value is set to 0?
molski said:
Hhhmmm...strange, yesterday I changed this value and T9 was gone on my Wings. Are you sure the value is set to 0?
Click to expand...
Click to collapse
checked again, still 0 and no effect.
tried set it 1, reload, set 0, reload. no effect.
i'm using bestregedit.
You said: carrierdefaulttextmode=0
he said: textinputmode=0
that's totally different you should try again friend
issam1979 said:
You said: carrierdefaulttextmode=0
he said: textinputmode=0
that's totally different you should try again friend
Click to expand...
Click to collapse
i know, texinputmode already set to 0, anyway, i tried again - no sense. Seems like i'm doing something totally wrong. I'm also get used to switch 'abc' mode from 'xt9' by pressing '*' on numeric keypad, that's a little faster, but what i really wish is to switch languages by 1 ot 2 key pressed, like on pc.

[reg/cab] disable/enable xt9 -- pls confirm

I don't know too much about xt9 other than it really pisses me off. I imagine since you clicked into this thread there's a moderate chance you share these sentiments. Took me a good seven minutes of googling but I found a two year old post by DAVIMON who produced these registry instructions which I tested on my Raphael successfully in both directions:
To disable:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
Change Ime File to \windows\compime.dll
Change Layout Text to COMP IME
Done. You may not even have to reboot.
Are you for some strange reason in the opposite situation? To enable xt9, same folder,
Change Ime File to \windows\eT9Ime.dll
Change Layout Text to eT9 IME
Then I made cabs on Fmstrat's Registry Changer website for each but since I had already made the disable changes manually I could only test the reverse. You can't install the disable cab and then install the enable cab to revert or do the opposite. I think you have to uninstall what you installed to toggle what you toggled. Whatever -- If all else fails use the ppc regeditor or MobileRegistryEditor (also attached) on your computer to make the changes through activesync.
Again, I am not absolutely certain the disable cab works so if one of you would work up some adrenaline and test it I'd appreciate it if you could confirm on this thread.
Oh and note that these cabs have to install from the device not cabviaactivesync.
Doug
this tweak kills your "sym"-hardware key and disables autocomplete of recipient field of sms/mail.
Much easier is just to turn from t9 to abc on SIP
I've had these cabs made up for a while now. Once you disable xT9, you get the old windows autocompleteion back but you loose the compact qwerty
darfri said:
this tweak kills your "sym"-hardware key and disables autocomplete of recipient field of sms/mail.
Much easier is just to turn from t9 to abc on SIP
Click to expand...
Click to collapse
I can confirm that after a few soft resets these cabs and all disable xt9 cabs I have tried disables autocomplete of recipient field of sms/mail. In addition, it also does not allow you to even start a new text message or reply to one. Furthermore, installing enable xt9 cabinet file does not fix this problem and forces a HR. It sucks starting all over just because I want to use word suggestion and autocomplete.
Before this mess occurred, I played around with the settings for qwerty keyboard and enabled autosuggestion and autocomplete for ABC. However, it does not produce the same or anywhere near the same results as the regular keyboard offers.
EDIT: Correction, the above only happens if xda wm 6.1 pie for wm6 cab is installed
I feel your frustration Doug. I came across this a couple of months ago when I got my Fuze… http://forum.xda-developers.com/showpost.php?p=2630663&postcount=8
I created a cab that includes these registry modifications and it’s works perfect. Word Completion works fine too.
disable/enable tweak XT9
Can anybody confirm XT9 disable/enable tweak works in the HD2..
Thank you

Categories

Resources