Database Develop

wm5 - big problem....

I´ve Update my Qtek 9090 and at the end e tryed to sync with activesync 4.0 but doesn't work....when i put the PDA in the cradle my windows opens the "Found New Hardware Wizard"... the computer doesn´t install the drivers...it recognize a "Generic RNDIS (Prototype--Remenber to change idVendor).....
i can't install anything and i can't downgrade.....

tunekas said:
I´ve Update my Qtek 9090 and at the end e tryed to sync with activesync 4.0 but doesn't work....when i put the PDA in the cradle my windows opens the "Found New Hardware Wizard"... the computer doesn´t install the drivers...it recognize a "Generic RNDIS (Prototype--Remenber to change idVendor).....
i can't install anything and i can't downgrade.....
Click to expand...
Click to collapse
READ HERE !!!
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home

ActiveSync USB connection problems

After upgrading an i-Mate PDA2K (PH20B 0 B WWE E CDL__001 1.40.00 0 0 1.12.00 12.00) to WM5 BA TuMa v1.3 Release, ActiveSync via USB does not connect successfully.
Have tried all of the following without success:
- hard reset PDA;
- re-flash PDA, tried over 8 different WM5 ROM (including Logout, ArtZ, Ivan) all with the same problem;
- deleted all previous partnerships;
- Windows SP2 firewall disabled;
- set remote-NDIS host to use server-assigned IP address;
- reset IP on host computer (i.e. netsh int ip reset c:\resetlog.txt);
- uninstall/reinstallation of ActiveSync 4.1;
- uninstall/reinstallation of ActiveSync 4.2 beta;
- uninstall/reinstalled USB controller drivers;
This problem was experienced on two separate computers, none of which are running any software that modify the standard windows networking software.
When placed in cradle, ActiveSync on device reports that device is connecting, but, eventually fails with support code: 0x85020010.
Interestingly, when device is restored back to original shipped WM2K3SE ROM (PDA2k_WWE_14000_176_11200.exe), ActiveSync can connect successfully again via USB.
Any other suggestions to get ActiveSync via USB working under WM5?
Also, is it normal that once a BA has been upgraded to WM5, that you can no longer use BaUpgradeUt.exe and must always use MaUpgradeUt_noID.exe for future flashing? I lost the ability to use BaUpgradeUt.exe after the first upgrade.

Solution Found
Oops!
I forgot about the Firewall Client of Microsoft ISA Server 2004! Although it was disabled, it still must have been interfering with ActiveSync.
Uninstalling this ISA Firewall client software and restarting ActiveSync solved the problem.

Oracle PushMailClient Install Failure on WM6.1

My work uses Oracle PushMailClient, however I'm unable to install this on any WM6.1 ROM either on the Device or on the Storage Card. Tried a few Dutty flavors, and now L26's latest. No dice. Keep seeing the following in the generated log:
2008/05/08 10:43:13:000 [Thread: 0000000079183310] PIMAPSetup:llMain>>> DLL_PROCESS_ATTACH: [RELEASE] Build at Jun 3 2007 10:38:58 PST.
2008/05/08 10:43:13:000 [Thread: 0000000079183310] CreateToolhelp32Snapshot failed. Error [8] at ..\..\..\src\common\Win32Util.cpp:291
2008/05/08 10:43:13:000 [Thread: 0000000079183310] Formatted Error Message: Not enough storage is available to process this command.
2008/05/08 10:43:13:000 [Thread: 0000000079183310] Unable to kill PIMAPMonitor.
There is PLENTY of space on this Device, and on the Storage Card. I know some folks around here have had no trouble installing this on WM6.0. Do I need to drop back to WM6.0 too? Hope not. Thanks for any pointers.
UPDATE: My mistake, this will not install on the Tilt even at WM6.0. Must be a Tilt (or Kaiser?) specific issue. My coworkers have successfully installed this on Wizards using WM6.0. Some sort of C Interpreter difference? (way above my head, so apologies if that sounds dumb).
G.

You should try to configure your client to use IMAP4 for WM6.x.
There is a link on how to do this (pass Oracle firewall):
http://itsource.oraclecorp.com/owc_wiki/page/show.jz?page=PushMailSmartPhone

WLAN with Himalaya and WM6?

After upgrading my MDA2 (himalaya) with WM6.1 german, i have problems with my WLAN.
I installed my spectec WLAN driver for WM6, but nothing happens when i insert my WLAN card. The driver was installed well, but there is no reaktion or possibility to aktivate WLAN.
With WM 2003SE all is oK, -> spectec WLAN card is testet with WM2003!
If anyone has similar problems or solutions please post an answer.
Thanks
Eckhard

NET CF Initialization Error: - 2147483647 (80000001)

I was syncing my phone wirelessly and something failed and now I have a bunch of garbled files folders on my storage card and every time I try to start an app, I get the above message. Also, the Bluetooth syncing thingie doesn't work, it starts syncing but the connection fails.
Is there a fix for this? I don't want to reflash my phone again.

Got the same problem, anyone ?

Uninstall .NETCF 3.5 from ROM
Hi,
I have problem with .net cf 3.5.9198.0(ROM) which gives me error "Microsoft.Windowsmobile.forms, version=1.0.0.0, culture=neutral, publickeytoken=31BF3856AD364E35, or one of its dependencies was not found" running application required the .net cf.
How to uninstalled it from the ROM and install the previous version?
WM6.5 CE OS5.2.23034 (Build 23034.5.3.0).
Anybody have the same problem? Please help.
Its my 1st WM.

i had the encountered the same problem and i have no choice but hardreset