Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....
Hi folks,
I got a big problem with my Diamond, maybe some of you have a solution!
After a while all audio players got a thin compressed sound! After a hard reset it's gone, but after a while there is the same problem again!
It's just all players, fm radio works fine! I've installed coreplayer and with windows mediaplayer there it's just the same!
It's just on the headphone connection, bluetooth stereo headset works fine!
Has anyone an idea?
I think there are known problems with the audio boosting system. Try disabling it (if you can't work out how to do that, search the forum).
solution!?
Today I just experienced the same and thought my precious had gone bad = (
I also have coreplayer installed and just noticed that I have activated the equalizer function for both coreplayer and the touchflo (WM) player. I deactivated one and the sound was normal again...pheeew = )
I use SRS WOW and coreplayer, and it works perfect. Only problem I see is that I have to set the volume in the coreplayer program quite low, otherwise, I loose all the bass.
I'm using my Touch Diamond with TomTom in my car. Also I have a Nokia CK-7W carkit which I'm using with my Touch Diamond without any problems. When I get called, the radio switches to mute (*Telephone*) and I can hear the phonecall through the carkit speaker.
What I want now doesn't seem to work however. I'm using the program BTaudio to bluecast any sound that comes from my Touch Diamond to the Nokia CK-7W carkit. This works: When I enable BTaudio, sound is being redirected through my carkit, so any sounds from TomTom (or my TD mp3 player) is being played through this carkit speaker. The problem however: It is continuously claiming the speaker, even when there is no sounds. So when TomTom isn't talking, I still get the radio muted (*Telephone*), but no sounds from the carkit speaker (obviously).
I would like the radio to mute only there is sound coming from my Touch Diamond, so I can continue to use the car-radio for my normal music. I know the carkit has this option, with my previous Nokia 6230 the radio muted when I was dialing a number, to hear the dailtone through the carkit speaker. Also, the normal carkit function is working properly: It only mutes the car radio when there is an incoming or outgoing call, enabling the car radio to play music when there isn't any calling.
So in short: I would like BTaudio (or any other program) to only bluecast when there is actual sound coming from the Touch Diamond, otherwise I would like to hear the car-radio. Is there any way in realizing this? I heard from another person who also uses BTaudio and the Touch Diamond that doesn't has any problem with this on his Parrot carkit, it works the way I (and he) wants it to work.
I hope I'm making sense to all of you, because I would really like this 'issue' solved! Thanks in advance for any tips or suggestions!
Sorry for kicking this post, but I would really like TomTom to work properly with my carkit, so if anyone has any suggestion I would gladly hear them!
Did you find a solution?
Hi all,
First of all, I have searched a lot but could not find an answer to my question -- if it has already been posted then my apologies.
I have a strange problem. I listen to music via A2DP using the TF3D music player. Everything works fine until I stop listening and switch off my headset. If I then want to listen to music again and switch on my headset, I can't hear anything (either through the headset or the phone speaker) despite the music being played by the player until I soft reset the device and start again, when everything works fine! I have now got a new device for my car (again using A2DP) and have exactly the same problem.
I don't really want to get another music player because the default player serves my purpose just fine.
Any suggestions?
Thanks a bunch.
Hallo,
i had the same problem.But i have change the Audiomanager from HTC to Windows and disabled the Bitpool.Since i have no problem anymore.(Till one Week)
Can anyone confirm that.
sorry for my bad english
earthjumper said:
Hallo,
i had the same problem.But i have change the Audiomanager from HTC to Windows and disabled the Bitpool.Since i have no problem anymore.(Till one Week)
Can anyone confirm that.
sorry for my bad english
Click to expand...
Click to collapse
How did you change the default music player and disabled the bitpool? Can you please explain the procedure to me?
Thanks
Hallo,
i usec diamond twaeks. http://forum.xda-developers.com/showthread.php?t=409540
You can change the audiomanager to windows and at bluetooth you can switch the bitpool to disable.
I have used the bitpool at high, and i have the problem, i change it to disable an i have no more problem.
i hope this is the bug and no random...
earthjumper said:
Hallo,
i usec diamond twaeks. http://forum.xda-developers.com/showthread.php?t=409540
You can change the audiomanager to windows and at bluetooth you can switch the bitpool to disable.
I have used the bitpool at high, and i have the problem, i change it to disable an i have no more problem.
i hope this is the bug and no random...
Click to expand...
Click to collapse
Hi again earthjumper,
I have changed the bitpool so let's see what happens. I still don't know how to change the default music layer to media player!
Does it better the audio quality in A2DP ?
Cause I think the Diamond performs very bad, sound quality is awful when I listen to the music through my Jabra BT-8010.
Hissing, bad sound quality, distorsion... What a mess... My Sony Ericsson k800performs MUCH better and acts as a real audio player. With HTC, I could'nt manage to have decent audio in A2DP...
Any tweaks in Diamond Tweaks?
Thanks !
Try the free version of Pocket Music. If you enable the equalizer and play around with the presets, it really sounds good on the Diamond, both through the speaker and through BT headset. All others I tried I had the same experience as you.
http://www.pocketmind.com/pocketmusic.htm
THX a lot for ypour quick answer !
I'll give it a spin and keep you updated.
I am afraid it does not work at all...
I still hear these distorsions/metallic noises in high frequencies. It not "earable". It still really creates unintentionnal sounds, hissing and noise, lots of noise...
I have tried any single MP3 player for my diamond but none is working... I guess the A2DP is defective in ths unit.
I am left with a very sad feeling of disappointment... It's another world when I plug in the default corded headset which came out with the unit. Nice sound, not the best of course, but a REAL increase in quality. Niothing is wrong in high frequencies, everything is much smoother and less metallic.
Thanks for your help anyway !
Any other tweak that I might use ? Registry setting, Diamond Tweak... ?
Sound is so unnatural it looks like there's something wrong with a setting... And I don't think the Jabra BT-8010 is faulty here. It could be, but I really don't think so...
@cornwall,
have you change any bluetooth settingss?
when i change the joint-stereo setting to disable, the sound over my bt-headset very bad.let it enable the sound is good, but low bass.
cornwall said:
I am afraid it does not work at all...
I still hear these distorsions/metallic noises in high frequencies. It not "earable". It still really creates unintentionnal sounds, hissing and noise, lots of noise...
...
I am left with a very sad feeling of disappointment... It's another world when I plug in the default corded headset which came out with the unit. Nice sound, not the best of course, but a REAL increase in quality. Niothing is wrong in high frequencies, everything is much smoother and less metallic.
...
Click to expand...
Click to collapse
cornwall said:
And I don't think the Jabra BT-8010 is faulty here. It could be, but I really don't think so...
Click to expand...
Click to collapse
Thats not your Jamba, i bought yesterday Sony Ericsson Bluetooth stereo loudspeaker,
(MSB-100 i think) and the sound is terrible - you hear so much high frequencies distorsions that your ears suffers (and i'm not a sound freak!).
Tested the loudspeaker with old sony ericsson - no distorsions, sound quality 200% better..
Whats sad I haven't found the solution so far,
only SRS WOW (settings WOW Bass) brings me a little bit satisfaction..
Will try more tricks, maybe new ROM with new drivers ??
Hi all,
We seem to have drifted from my original query! I still have not found the solution. I tried earthjumper's remedy but it didn't work. I have tried other players but you can't control them via Bluetooth (i.e. play/pause/volume etc.). Windows Media Player is OK BUT every time it is run, you have to select the music and the library navigation is meant to be done with a stylus. The thing I like most about TF3D music player is that the music that you have selected to play (finger navigation) is always there even when you reset the device.
So my question again -- is there any solution for my problem or can someone tell me of a Windows media player skin which doesn't require a stylus?
Thanks and apologies for the long post.
I agree, I had an orbit 2, and the sound was fantastic through my car bluetooth stereo, now with the xda ignito the sound crackels and sounds terrible on high frequencys.
I have skipping music during audio playback. To say there is no any regularity in that, but mostly it happends when I use Bt handsfree SE HBH-DS970.
I use Core-player to playback MP3 files.
Suddenly I saw the fix for that problem but only for HTC Touch Diamond. Is there any similar fix for Kaiser?
Thank you!
I have the same problem when I use pocket player and bluetooth. I thought that it was a BT problem, but I have seen the same behavior when it is not connected to Bluetooth. Maybe memory or too many processes.
Don't think so, because there is no other processes in back except Coreplayer.. I tried to change buffer size - no result... Also it happends not only with BT headphones..
Really don't know what to do...