TALK / END buttons not workings...help - Touch Diamond, MDA Compact IV General

When I want to dial a phone number that I called before I used to press the TALK button and dial the number. Now I can't. It is not responding. The same happens and with the END button. When I weant to close a phone call it does not respond. I have to use touch screen to do it.A week ago the phone was working fine What do I do wrong?

Have you installed a program that can assign multiple functions to the hard keys? Since these programs could also allow you to not assign any function at all, thus neither the original function. Otherwise, make a complete backup of your phone and try if a hard reset brings the keys alive again...

i had the same problem. nothing to do with installing any software, it happened after i used sushi's tf3d config 0.5 to change the tab order. All the buttons stopped except for the home button. several hard resets later, installing my usul cab one t a time and testing the device, it seemed to fail after installing the remote desktop6.1 cab, or the wndows sideshow cab.
I'm using 1.93.456.2 wwe, and now tf3d config 0.6. i've not installed sideshow or remote desktop and all is working fine again.
not sure if this helps but it's kind nice to know i'm not alone in experiencing this problem!
cheers
paul

Related

HELP! My BA's button are mess up

Hi experts, I was using ArtZ's Widcomm WM5 rom and radio 1.15 for a week with no problem. I think after I uninstall the HTC SmartDial and problems came up. The Answer(Green Phone Button), Hang up(Red Phone) buttons and D-pad including action button in the center of d-pad are not functioning as they should. When I press answer button in WM5, first start menu, contact and calender all pop-up. The rest of the buttons including D-pad starts different programs. I tried to reflash to Ivan's WM5 rom and downgrade to WM2003, but the buttons still won't function properly. Help, I can't even answer the phone or hang up using buttons.
YEAH! FIXED itself.
I took out the battery and leave it over night while the backup runs out. I put back the main battery and buttons works again. It is nice to map the Answer button to voice activate or something else. Does anyone knows how the change the phone buttons or D-pad to some other functions?

Call button not responsive

i´ve noticed today that my "green or call" button is not responsive.
I have to press many times to enter the phone, and also to select a number in contacts and make that call.
Anyone had this problem?
I made a hard reset because it might be some software i installed and the problem is still there
no one are having or had this issue?
Try a soft reset, the touchpad with the buttons often looses it's way.
tnyynt said:
Try a soft reset, the touchpad with the buttons often looses it's way.
Click to expand...
Click to collapse
Yes i did, and also tried another rom beside de original.
I can say, that some times work and sometimes don´t work that well, but even without a reset it starts to work again but with some flaws.
I´m starting to suspect that this is a normal situation on most of the diamonds and no one has ever talked very much about it
I own my diamond for about a month and it only started to do this a week ago, that´s very very strange.
battax said:
no one are having or had this issue?
Click to expand...
Click to collapse
Every now and them my soft touch panel loses it's way.
Here's what I do to reallign it: either press on the bottom right corner twice or soft reset.
tnyynt said:
Every now and them my soft touch panel loses it's way.
Here's what I do to reallign it: either press on the bottom right corner twice or soft reset.
Click to expand...
Click to collapse
Even with a soft reset sometimes the problem continues.
I don´t understand your ideia, so the call button have something to do with the soft touch (whell?) they are connected?
When you say press bottom right corner, you say press the disconnect button? and it solves the irresponsive call button?
Do you know anyone with a diamond having this issue? It seems to me like a hardware problem.
It´s very very anoying and it drives me crazy.
Today the call button is working flawless, so i don´t understand this, send to warranty or not
Does anyone have issues with the keypad?
I think that some people are starting to have problems with it.
ok this is weird..all my keys aren't working at all incl. the volume key except the home key..even the touch-sensitive scrolling doesn't work. Oh and the phone keypad, compact qwerty and full qwerty (if T9 is on) don't work too......!
ok this is weirder..long press end key works...I suppose my problem is software?
okayyyyyyyy even weirder..it's fixed. I uninstalled Cyberon Voice Commander and Remote Desktop Mobile. I have a feeling it's Remote Desktop. However, it was fine when I first installed both programs so I have no idea what triggered the problem......maybe because I left my phone at the post office?!
attakorn said:
okayyyyyyyy even weirder..it's fixed. I uninstalled Cyberon Voice Commander and Remote Desktop Mobile. I have a feeling it's Remote Desktop. However, it was fine when I first installed both programs so I have no idea what triggered the problem......maybe because I left my phone at the post office?!
Click to expand...
Click to collapse
Some application cause that symthons in the hardware buttons, but in my case i don´t none installed and also i don´t have no app to mapp hardware buttons.
I guess it´s a hardware flaw in my case.

My Kaiser has issues. Any suggestions?

This morning I woke up to find that my kaiser's buttons were non-responsive. after about 2 min of testing, I found that only two buttons on my kaiser worked, the power button, and the center button (it acts like the windows button now WTF???). Also, when I power on the device, I see the dialer pop up, and the following W on the far right, wich is replaced with S, then Z, then X. (can you say WTF???) The touch screen works perfectly, and none of the keys on the keyboard work.
I would love suggestions on what to do to fix it (I am not afraid to take it apart, I just need a torx-5 bit), and barring that, suggestions on a new phone.
See here: http://www.youtube.com/watch?v=oMv3VONt0R4
Fenny said:
This morning I woke up to find that my kaiser's buttons were non-responsive. after about 2 min of testing, I found that only two buttons on my kaiser worked, the power button, and the center button (it acts like the windows button now WTF???). Also, when I power on the device, I see the dialer pop up, and the following W on the far right, wich is replaced with S, then Z, then X. (can you say WTF???) The touch screen works perfectly, and none of the keys on the keyboard work.
I would love suggestions on what to do to fix it (I am not afraid to take it apart, I just need a torx-5 bit), and barring that, suggestions on a new phone.
See here: http://www.youtube.com/watch?v=oMv3VONt0R4
Click to expand...
Click to collapse
Try hard reset first.
solution..!
hi
first try soft reset, and if that doesnt work then uninstall some program and after each uninstall soft reset
if this doesnt do it for the device then there only one option---->HARD RESET
regards
Hi,
maybe it's a an issue using a creen locker like Sunscape, ThrottleLock or S2U2. Try uninstalling them (it), could help.
Well, I soft reset it a couple of times, same result, I can't hard reset it, because the button combination does not work, and neither does clearstorage. it looks like it's a hardware problem to me.

Phone freeze after a call

Hi,
I wonder if I'm the only one having this issue...
sometimes, after a call, the phone freezes and I have to press the Home key to get the TF3D screen back.
But after that, I can't make a new call... nothing happens when I press the "Call" button or when I try to launch the dialer by pressing on the "Phone" soft button.
I try to launch the FdcSoft TaskMgr (wm2005_3.1) in order to see if a process was stuck, it usually loads fast but in this case, it stops loading and nothing was displayed... (I'm still able to see the TF3D background instead of TaskMgr).
Only way to recover from it, is to SR the device...
I switch off the device each nights, I would expect more stability, it's not like I'm running it for more than 2 weeks...
This issue always occurs (when it does) after a call or when I press the hard key "End call".
Oh, funny thing... By 3 times, I was also unable to end a call, the call was still running and I had to SR the device to end the call... very nice !
Anyone with this issue or with an idea ?
It's the only thing that drives me crazy with this phone :|
Rom : 1.93
radio : BS14 currently, but it was the same with previous radios.
is there anybody with a little clue for me ?
Please
Me too.
Panosha: 1.93.405.1 WWE Shine On 2.4 Full
Radio: 1.03.25.18
After calls... Freezes 80% or more. I don't know if maybe it is 100% of the time when the other end hangs up first. (I don't get it with Voicemail!)
I also get freezes some other times. I don't think it is memory related, (before someone suggests it.) Also Please don't tell me to Hard Reset. I have Hard resetted to my heart's content, also directly after every Rom Update (to get GPS working)
try soft reset......i also got that problem....i do a soft reset,works fine...
cheers!?!!!

Can't turn off Kaiser

I know it sound weird, but my Kaiser can't be switched off anymore:
The device is set to turn itself off after 1 minute on batteries.
(Would not switch off automatically.)
When I press the on/off switch nothing happens.
When I press and hold the on/off switch, a dialog comes on that informs that the device will be switched off and unsave information might get lost.
But the "busy icon" for minutes comes on and the Kaiser does not switch off.
Pressing the stylus into the reset hole resets the device, but the problem remains the same.
Any ideas?
Thank you very much in advance.
Thanks
V
PS: I tried to search the forum intensively but I can't bring up useful threads.
Solution found
Looks as if I found how to cure the problem myself:
Everything else but TomTom 7,450 seemed to work on the machine.
TomTom hang when I tried to start it.
And using TomTom was the last thing I did yesterday.
So I tried to uninstall it.
But the WM uninstall hang as well while trying to remove it.
A Reset would not help here either.
So I manually deleted all files in the Navigator Directory
and did a reset.
Ran uninstall again. Then reset.
And from now the device was back to normal as far as the
on/off button is concerned. (YEPP!)
Reinstalled TomTom and all is back to normal as far as I can see.

Categories

Resources