Related
I've finally decided to move up to WM6.1 on my TyTN II.
My question is, would the cab files I currently have installed on my unit (with WM6.0) still work once I upgrade to 6.1?
The most important programs I want re-installed are primarily the TouchFLO upgrades (TouchFLO cube, Random Access, Task Manager etc) and the media upgrades (HTC Album and Camera; TCPMP).
Also, am I right in assuming all the standard programs that were installed in my phone when it was new (Mobile Office, WMP, Adobe Reader, etc) will also be in the 6.1 installation pack? I'll be using the WM6.1 I downloaded from the HTC e-Club site.
'appreciate inputs
TIA
My question is, would the cab files I currently have installed on my unit (with WM6.0) still work once I upgrade to 6.1?
Click to expand...
Click to collapse
Not sure, but probably most of the yes, it was the case when I did it. You would need to reinstall these cabs because programs can't be correctly restored when doing a ROM upgrade, even with programs like Sprite Backup.
The most important programs I want re-installed are primarily the TouchFLO upgrades (TouchFLO cube, Random Access, Task Manager etc) and the media upgrades (HTC Album and Camera; TCPMP).
Click to expand...
Click to collapse
Task Manager, HTC Album and Camera are included. I am not using the others. If you do a search on the forum and to be sure, you will probably find these programs updated and also in 6.1 cooked ROMs.
Also, am I right in assuming all the standard programs that were installed in my phone when it was new (Mobile Office, WMP, Adobe Reader, etc) will also be in the 6.1 installation pack? I'll be using the WM6.1 I downloaded from the HTC e-Club site.
Click to expand...
Click to collapse
Yes, in some cases updated versions will be installed plus a few improvements that you can find here
http://forum.xda-developers.com/showthread.php?t=375979 and by searching. I didn't miss any previous WM 6.0 programs after the upgrade.
I strongly recommend a full backup before upgrading.
I hope you don't use GPS then
rigelstuff said:
I've finally decided to move up to WM6.1 on my TyTN II.
My question is, would the cab files I currently have installed on my unit (with WM6.0) still work once I upgrade to 6.1?
Click to expand...
Click to collapse
I don't use any of those cabs but some of them seem to have WM 6.1 compatible versions from searching here. You do realise that many people have had issues with GPS performance since upgrading to WM 6.1 from 6.0. Personally I wish I'd held off until HTC had really sorted these problems out (they still haven't) but now I've done it there's no going back (unless I want to send the phone back to HTC for them to flash it to the original configuration or risk voiding the warranty if I do it myself).
Also, am I right in assuming all the standard programs that were installed in my phone when it was new (Mobile Office, WMP, Adobe Reader, etc) will also be in the 6.1 installation pack? I'll be using the WM6.1 I downloaded from the HTC e-Club site.
Click to expand...
Click to collapse
Thats where I got mine from and yes those programs are still there, as mentioned already, some are improved.
Further to the suggestion anoano made about backing up, make sure your backup software is up to date enough to be able to restore the files you need to a newer OS. Some older versions have problems with restoring to a different OS than that used to create the backup. Check the backup software makers website if in doubt.
most cabs are universal among WM5,6 and 6.1. if they weren't then the description,filename or faq would mention if it was only for a certain version of WM
Thanks guys. This forum is the best!
Flying Kiwi, you're now two for two with me I wouldn't have known about the GPS issue if not for this forum. What GPS performance issues do you mean? I don't really use the GPS, but it would be a bummer to eventually need it, and for it not to work. I mean, I did pay for the hardware right? Any signs of HTC working this out?
gps works but it can be slow at times whether starting up,talking with satellites, etc. most of the gps issues are either applications issues or the radio
rigelstuff said:
Flying Kiwi, you're now two for two with me
Click to expand...
Click to collapse
Not sure what that means, sounds like a supermarket special offer gone wrong
I wouldn't have known about the GPS issue if not for this forum. What GPS performance issues do you mean?
Click to expand...
Click to collapse
The ones that are also detailed in this forum, both in this thread *Hopeless* GPS after 6.1 Update? and elsewhere. This thread covers it quite well (apart from the reference to quick GPS being the culprit even though a radio change makes a big difference).
I don't really use the GPS, but it would be a bummer to eventually need it, and for it not to work. I mean, I did pay for the hardware right? Any signs of HTC working this out?
Click to expand...
Click to collapse
I think the first step is to get them to even acknowledge it as an issue. Let us know what HTC say to you about it (or the carrier if it's a carrier provided device). Just mention exactly what you've told us here that you're considering using the WM 6.1 update but that you have read online about major problems with GPS performance afterwards.
good work with this post; very helpful.
Flying Kiwi said:
Not sure what that means, sounds like a supermarket special offer gone wrong
Click to expand...
Click to collapse
Sorry, must've said that wrong
What I meant was, that's my second post that you answered
I'll check out that post you mentioned and will contact HTC as well.
Much thanks!
Hi,
As promished, the french version of my rom. Cab install is working, and opera is removed on popular demand. Got usbtools, and taskmanager, even if the icon is not here now. Exe is in windows folder.
This one also has d3d software dll linked.
http://rapidshare.com/files/142052168/snapfrench4.rar.html
yes
again a big thanks to you
sorry for havent seen it before
thanks
too early? but thxs !
great!! thank you very much for the time and work you spend for the shift communoty!
i m very happy to flash this rom cause french is my native linguage, and it gives to me more compatiblity with french software.
maybe its to early to cook french rom, because htc shift is not easy to finf in french shops... orange is selling it with origami data plans, but its not very popular , finally the best way to get it is to make special order, or to by it from internet .
you should focus your time on english rom, and maybe spanish as its seconf or third language used in the world
Anyway thank you very much fr this rom !!!
by the way i love opera but there are so many release and a few are working well on the htc shift
c u,
The one I have included in rom works pretty well. I might release it also infrench (my native language too )
any progress on phone feature?
thaihugo said:
The one I have included in rom works pretty well. I might release it also infrench (my native language too )
Click to expand...
Click to collapse
thaihugo
I compared the registry files of both Tilt and Shift (I don't have Diamond or Ralpheal) and found some interesting differences in the case of BT, WiFi and SD card. I am going to publish those here in a few hours.
I have not seen much differences in the phone area (registry settings) except missing settings for phone and relevant skin settings under Machine and Current User.
thanks
Ram
saiweb said:
thaihugo
I compared the registry files of both Tilt and Shift (I don't have Diamond or Ralpheal) and found some interesting differences in the case of BT, WiFi and SD card. I am going to publish those here in a few hours.
I have not seen much differences in the phone area (registry settings) except missing settings for phone and relevant skin settings under Machine and Current User.
thanks
Ram
Click to expand...
Click to collapse
Problem is not to find registry settings. These are pretty easy to add. This registry can be usefull anyway, but the main problem is that the bios is locking the SD and BT for vista, and even with the right drivers, they will not be activated on WM side. One think that would improve the dev here is to find how this mecanic works.
As for the phone, using a full phone dll and registry doesn't help, as it seems the dll provided with the shift are voice disabled, and using new depend on the radio.
thaihugo said:
Problem is not to find registry settings. These are pretty easy to add. This registry can be usefull anyway, but the main problem is that the bios is locking the SD and BT for vista, and even with the right drivers, they will not be activated on WM side. One think that would improve the dev here is to find how this mecanic works.
As for the phone, using a full phone dll and registry doesn't help, as it seems the dll provided with the shift are voice disabled, and using new depend on the radio.
Click to expand...
Click to collapse
Regarding BT, WiFi and SD that is what I guessed. Since they are shared, only one of them would work at a given time with the given architecture. Regarding phone, my guess also coincides with you. I think we need to have a different radio, but I may be wrong too.
Thanks
Ram
RIL proxy, driver and client support Phone Calls
thaihugo said:
Problem is not to find registry settings. These are pretty easy to add. This registry can be usefull anyway, but the main problem is that the bios is locking the SD and BT for vista, and even with the right drivers, they will not be activated on WM side. One think that would improve the dev here is to find how this mecanic works.
As for the phone, using a full phone dll and registry doesn't help, as it seems the dll provided with the shift are voice disabled, and using new depend on the radio.
Click to expand...
Click to collapse
Finger's crossed, the RIL client (celltsp.dll) is same as the one you will find in Kaiser. The RIL proxy, RIL Client etc. are same you will find in Kaiser, only question left for now is whether the Radio i.e. underlying supports voice calls or not.
Thanks
Ram
Nice rom thks.
But so bad that the keyboard become an qwerty.
With registry it's fine but you may include it in your update...
BTW, very nice rom. No problem.
Hello
I don't like to act like a noob (especially in the HTC world in which I had a lot of phones without any real problems...), but here I can't make it...
I put the ROM, perfect. But here the things I can't understand :
- can't open the sound from the today view
- usbtool (I really had hard time to find the soft!!!), I can't do nothing with it, there is a sentence "Please plug in cable firest" and I tried "USB_cable_in" but nothing happened... So I can't connect to Vista... Where am I wrong?
I think I can manage the others things, like buttons, qwerty, ... but for the usbtool thing I am really lost... so I use "Internet share" when it is working...
Hi!
I just received my first WM phone HTC trinity
I was wondering is there any possibilities to get flashplayer for this device that can play for example http://atdhe.net/ those or justin.tv flashes so that I could watch NBA games while I'm on the road.
Like I said, this is my first WM phone and I have only used symbian by far.
I tried to google this problem but couldn't find any answers that were up to date.
THX for the help in advance.
Hi,
same for me. Previously I used to have hp ipaq 514 (wm 6.0 smartphone), where I just downloaded Flaslite 2.1 and that was it. (Standalone app with file association. If I remember well, it also made some basic animation to work in browser.)
Recently I 've bought Xperia and I already tried several options to make Flash working. (Some of them failed to install, some of them installed, but without any effect.)
...FlashLite.3.1.CAB, fp7_ppc_en.cab, ...
What I am actualy searching for is standalone player for swf files stored localy. Integration into browser is not really important for me.
I have to say, that XDA devs has been the best source for me, but a lot of information seems to be outdated. (For instance the wiki article about Flash.)
Currently I ended up with some Modaco package, but it seems to contain some really old files.
I have already spent a lot of time by investigation, but some far no conclusion. I am lost and disappointed.
What should I do to make it work? Did I miss something elementary?
Many thanks for help (or just one link )
I second this request. Really need it to see flash animations working, especially in web pages...
Please help, why pocket e-sword menu for book, chapter, and verse are squeeze in mostly new ROMs dated 2009.
This program was work perfectly in earlier ROM.
Any solution?
Same issue
I've had this same issue with the shrunk toolbar icons and misalignment of some of the controls. I'm not sure what the solution is.
One more
I've been using pocket e-sword since ages (dell x50v, Hermes, Kaiser, Raphael) and this is the first phone which has trouble displaying it. Actually my original 1.90.405.1 Raphael ROM did show it correctly, the trouble came with the official 5.05.401.1 upgrade in February.
I can confirm that EnergyROM 2.0 41609 also suffers, though e-sword was one of the first things I tried on it :-(
Maybe we should also bug Rick Meyers to try to see the cause of the problem. Hopefully all new WM phones, not just HTCs will be effected, so the pressure might increase. He upgraded the program when the new VGA PDAs came out.... The best Bible program in my opinion!
I sent him this bug report:
[greetings...] This February I upgraded my VGA WM6.1 HTC Touch Pro to a new ROM version, and e-sword appears garbled. As I've been searching for a solution to this problem I'm starting to realize the amount of people being effected, anybody with a newer HTC phone: VGA, WVGA alike :-( While we are trying to find a solution, I can imagine it might be a very little change in your program which could fix the problem... Maybe not...
The icons shrunk to quarter size, forms squeezed to half width (I'd gladly send screenshots, let me know if they would help). I'm still trying to use the program, but it's almost impossible. Maybe there's an easy fix. I'd guess it has to do with the screen metrics the OS reports to e-sword and the way e-sword then uses these values. People also think it could be related to .Net 3.5, but even if I force my PDA to use 2.0 it doesn't seem to fix. [greetings...]
Click to expand...
Click to collapse
I have the same problem. Thanks for informing Rick Meryer.
vgergo said:
I've been using pocket e-sword since ages (dell x50v, Hermes, Kaiser, Raphael) and this is the first phone which has trouble displaying it. Actually my original 1.90.405.1 Raphael ROM did show it correctly, the trouble came with the official 5.05.401.1 upgrade in February.
I can confirm that EnergyROM 2.0 41609 also suffers, though e-sword was one of the first things I tried on it :-(
Maybe we should also bug Rick Meyers to try to see the cause of the problem. Hopefully all new WM phones, not just HTCs will be effected, so the pressure might increase. He upgraded the program when the new VGA PDAs came out.... The best Bible program in my opinion!
Click to expand...
Click to collapse
Thank u Vgergo, hope Rick Meyers will able to fix it ASAP.
I agree that this is the best Bible program and its free.......
rvs97 said:
Thank u Vgergo, hope Rick Meyers will able to fix it ASAP.
I agree that this is the best Bible program and its free.......
Click to expand...
Click to collapse
hi Guys,
I've tried bugging Rick for a few months now and have had no reply. I think he's been busy with the E-Sword NET project
WizP said:
hi Guys,
I've tried bugging Rick for a few months now and have had no reply. I think he's been busy with the E-Sword NET project
Click to expand...
Click to collapse
I submitted the problem twice through the website with no reply. Sounds like he's got to be well aware of it by now.
I've got some commercial software that works ok, but it just doesn't function as well. Also, there aren't as many commentaries available.
I've been looking around for a solution to this problem as well. I have a Sprint Touch Pro; it works when I use the original ROM that came on the device, but on any other ROM from any kitchen that I've tried (including WM 6.5) this problem exists where the program seems to think it is on a QVGA device,. I've gone through the registry looking for the possibility that something has the wrong resolution encoded there, but I've not been successful.
There is a config file for the Pocket e-Sword itself; perhaps on VGA devices it sets a value in this file (for those cases where it works)? I'd rather not go back to the stock ROM at this point, so perhaps someone else can look at this file (\Program Files\Pocket e-Sword\Pocket e-Sword.config) to see if there is anything related to resolution there when it is displaying correctly?
I've emailed Rick Myers through their web site also, and like the others I've heard nothing unfortunately so far.
Confirmed
I can also confirm this on elite RC3 ROM for the Fuze.
Thanks for bringing this up, Im running the NRG Rom which is great but having the same issue. Esword working properly would make make the Fuze the best phone I have ever had.
Jeremiah 29:11
Zoidborg said:
There is a config file for the Pocket e-Sword itself; perhaps on VGA devices it sets a value in this file (for those cases where it works)? I'd rather not go back to the stock ROM at this point, so perhaps someone else can look at this file (\Program Files\Pocket e-Sword\Pocket e-Sword.config) to see if there is anything related to resolution there when it is displaying correctly?
Click to expand...
Click to collapse
I have an old backup of my memory card from the time pesw used to work. I cannot see any resolution setting in here.
older version
I have an older version that was on a memory card i bought. As I do not believe in god(s) u r welcome to it.
vgergo said:
I have an old backup of my memory card from the time pesw used to work. I cannot see any resolution setting in here.
Click to expand...
Click to collapse
I agree, the config file is just for storing personal settings. What we need is a response from RM. I've sent bug reports in the past and never had replies, which is a shame!
I'm glad someone mentioned that forcing .net 2 doesn't help I was about to try that!
Here are the ROMs I've tried that e-s has these problems with:
Official HTC Touch Pro Updated ROM
Elite ROM RC4
Shep's ROM 21222
Shep's ROM 21232
I haven't found a modern ROM that works as yet but if I do I'll let everyone know.
If only Pocket e-Sword were an open source project!
monkeyfishing said:
If only Pocket e-Sword were an open source project!
Click to expand...
Click to collapse
I also am annoyed that Pocket e-Sword is not an open source project. GRR..... I am another long term user of the program that can't now use it since I have a Raphael. My wife has the same problem as she now has a Diamond.
If anyone would like to contact Rick Myers directly, whois gladly provided his contact information, including a phone number. Who knows, it might work!
Code:
MEYERS, RICK
ATTN: E-SWORD.NET
c/o Network Solutions
P.O. Box 447
Herndon, VA. 20172-0447
Domain Name: E-SWORD.NET
Administrative Contact, Technical Contact:
MEYERS, RICK
E-SWORD
ATTN: E-SWORD.NET
c/o Network Solutions
P.O. Box 447
Herndon, VA 20172-0447
[COLOR="Red"][B]570-708-8780[/B][/COLOR]
Record expires on 12-Feb-2011.
Record created on 12-Feb-2000.
Database last updated on 30-May-2009 08:22:19 EDT.
e-word display problem
Hello,
I wanted to communicate you only briefly, that i contacted Rick and he work on the problem with the display.
Bye,
Tom
Great new to hear Rick is working on the problem.
Hopefully we get as well an update for the pocket e-Sword (the desktop version just launched a new version recently)
A new version has been released!
It solves almost all problems, the only thing left (at least on my Raphael) is that the bible text is WAY too large, even with the smallest font size selected. I've contacted Rick about it, hopefully he'll come up with something.
Pocket e-Sword for Windows Mobile 6 (VGA only)
http://www.e-sword.net/pocketpc/downloads.html
Pocket e-Sword for Windows Mobile 6 (VGA only) (v3.1.0) 4,452kb
Updated 06-22-09
Not tested it yet as I'm at work on a Mac but hopefully all is well now!
Thanks Rick! (If you're reading this?)
Update: Having now tested it on my Touch Pro running WM6.5, I can confirm that everything that was teeny tiny, is now as it should be - top marks! That said, the text size is abnormally large... hopefully Rick gets wind of this bug and fixes soon otherwise people will be reading over my shoulder on the train - maybe that's not such a bad thing!?
New version works on Touch Pro2
Hi all
I am using the new (VGA) version on my Touch Pro2 and it seems to work well. A couple of times it's not been able to open the bible and other resources but a soft reset solves this.
Cheers
andrew-in-woking
*Second post is a quick tutorial of all the steps I did*
For the past year+ I lots of problems with my tilt. Terrible keyboard response problems, like the keyboard only working 25% of the time. The touch screen being unresponsive or slow 50% of the time. I've hated my phone. Thought it was just a piece of junk. I soft reset so much I thought the reset button was going to fail.
I tried nearly every new ROM that came out, each time after being dissapointed because my problems remained, then I'd move on to the disable xt9 cab, tilt keyboard fix cab, keyboard speed up cab (which I'm still not sure if works, since I now have my initial keyboard delay set at 0 and I don't know if I see a difference), etc. Tried the touch sensitivity registry edit, installed the (I think) x1 touch sensitivity cab. But nothing seemed to change a thing.
I had realized that most of my issues were software related because sometimes things would work fine (for a couple minutes). I've tried the press the hell out of the keyboard buttons fix that was supposed to regain contact between the key, and the sensor for the keyboard, and pretty much everything out there.
Then I recently installed the HTC ROM for the Tilt, and voila, I have a new phone, works nearly flawlessly.
Since then, I have installed Manila 2d (start with update 20, install everything included, then install the latest version) youtube/opera/google maps/audio manager/pictures etc. all work perfectly, installed the Manila2D v20 N2A patch which fixed the weather tab to show my home town, M2DC and applied a new skin, Total Commander (to move the edited weathercities file), Wstask (awesome), ATT Navigator, Windows Live (great for syncing contacts), and it works perfectly. It's fast. I can use my phone now without the struggle, and am happier than I've been in a long time.
I haven't heard anyone suggesting this so I thought I'd let everyone know. This is the phone I always wanted from my Tilt. I have to assume that the minor hardware differences between versions creates a problem with non-native ROM's, and if you are having problems I recommend trying a factory ROM made for your device, you may be pleasantly surprised.
Dustin
*edit* As I'm sure most know, there are hardware issues with the keyboard for many, this will obviously not fix those issues. However, I was able to fix the massive software issues I've had which also effected the keyboard. I still have a testy Y key, but it's not a huge issue when compared to what it was like before. My phone works great.
Correct Forum?
Flashed to the HTC ROM for the AT&T Tilt, download here:
http://www.htc.com/us/SupportDownload.aspxp_id=67&cat=2&dl_id=94
Soft reset immediately after screen alignment, and setup to avoid bloatware.
Adjusted settings for MediaNet:
http://forum.xda-developers.com/showthread.php?p=1632060#post1632060
Installed the following cab files (here's the files, install order, what to do, how to do it, etc. is up to you, try to search for yourselves, I'll try to answer questions posed, included iFonz, and a couple other cabs for the heck of it if you guys wanna play with em):
http://http://rapidshare.com/files/239391014/Cab_Files.rar
Read the following post for info on installing m2d:
http://forum.xda-developers.com/showthread.php?t=425851
To install telenav go to the following address from your phone:
ota.telenav.com/att/tnn
If you do it right, I think you'll be happy campers, enjoy!
Dustin
I've been having the same issues with my tilt as well. EXTREMELY annoying. I love the tilt, but hate that it constantly lags.
Do you have a link to the ROM from HTC?
The last ROM from HTC for the tilt gave me problems
Yes please post the link as i am also having this problem.
Thanks
Link inside!
Here y'all go. It's important to note that this is ROM build 1.62.502.0 and will change your radio to 1.27.14.09. Further info can be found HERE
HTC AT&T Tilt ROM
Different link to the Rom
Here is the link for the page HTC posted the Tilt ROM download if you would like to read first before downloading:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
Hope this helps you guys. For me it was night and day. Let me know if this helps you guys.
Also, I wonder if there are any ROM cooks out there who are interested in cooking ROM's based on the Tilt ROM. That would be sweeet!!!
Dustin
*edit* I'm not sure about the ROM tmnt.mikey posted, but the link I've posted does not change the radio to that version, I flashed and have radio version 1.65.21.18. I'm not sure what radio I was using pre-flash (oops).
does this work with kaiser as well?
because at&t does not have the front camera...
so if i flash to this rom, will it render my front camera unusable?
not that it's really that important, i'd rather have my keyboard functioning well again.
other than that, is there any complication if i run this on my kaiser?
because in the HTC page, it's said... only for at&t tilt...
Kaiser ROM
I have no way to know if this ROM will work for the Kaiser, someone would have to try it out and let us know. I can't imagine it would brick the phone, but the keyboard layout is different, and the front camera thing. However, you might look for the latest Kaiser ROM from HTC then apply all the cabs you want and see if that works for you. I installed the ATT ROM, then did a soft reset before the apps were loaded to save space and clutter, then installed just the cabs I prefer.
It's been almost a week now, and it is still working perfectly. I've installed almost 20 different cabs, it is running faster, and more stable than it ever has. I love my phone now. The difference is stunning. I haven't had any issues thus far, and I've never experienced that before. I hit a button and it works, I touch the screen it works. I'm going off about it so much because I want everyone to know this phone is not a lost cause. I'm still a little in shock how well it works. I had written it off, and thought between HTC, and Microsoft that this phone was just going to remain a glitchy pain in the rear. My phone was so difficult to use that I almost stopped texting all together. I was practically marking off each day on the calendar waiting for the remaining year of my contract to run out.
Dustin
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
berramm2001 said:
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
Click to expand...
Click to collapse
i actually followed the link from dustintm...
but the download was not for my area (i'm in singapore)
and you can't download it anyways...
you need to key in your serial number...
and it has to match the region...
so if that really fixed the keyboard problem...
congrats to those guys in the same region as dustintm...
as for why it happened, i also don't know...
i read in some other thread that it's unlikely if it's dust or the rubber...
i also think it has to do with the ROM, since some days my 'a' keys works fine...
Asian TyTN II ROM
Hey Jonathan,
Here is the link to the HTC Asia download page for the TyTN II:
http://www.htc.com/au/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Just so everyone knows, this ROM change I am talking about does not fix hardware related issues. I still have a testy "y" key, it works most of the time, but I do have to press it harder at times.
Prior to my find, I was having massive keyboard problems, sluggishness, having to press each key multiple times, etc. I was also having similar problems with the touch screen too.
This will not fix a hardware issue (obviously?). But I've found the new factory ROM has made my phone operate almost without flaw... for the first time. Responsive, stable and consistent. I can deal with the "y", I couldn't deal the snetacnes loking lik tihs (sentances looking like this (all the time)), and all the other problems/lock ups, etc.
Dustin
Keyboard problems sound like a hardware issue. You should try to find a local cellphone store that does repairs.
There is one in L.A. that can fix this for under $50.
Keyboard Problems
I found that I was experiencing hardware (keyboard), AND software related issues (keyboard, touch screen, sluggishness, and lock-ups). After installing this ROM all software issues have disappeared. I am very certain of this. One example is that occasionally the keyboard would work almost flawlessly (with the exception of the y key) and other times it was a complete struggle, multiple keypresses to register once, delay, etc. That made it clear to me that I was having software related issues.
I imagine it could have been ROM issues, or software related conflicts, but either way, I have solved my problems. I flashed to the latest HTC ATT Tilt ROM, and the following programs/cabs:
HTC Enchasements
HTC Audio Manager 2.0
herg62123 FSP, DShow, WMP Yo...
HTC Album 2.0
Google Maps
XDA-SPC-Noonski HTC YouTube
herg62123 2DManila_1_20_19131...
Customization Customize_Tool
snctln M2DC
C. Ghisler & Co. Total Commander
Debarron Manila2D v20N2A Patch
Windows Live 10.6.0034.0800 (Fixed)
waku WkTASK
AT&T Navigator
XDA-Team Opal Volume Control
Systweak Inc Reg Cleaner
SJ SamsungOmnia_Driver_D3D
Massimo Colored Top Bar
ELF Calculator Skin
The EquinoXe Wizard ReTOUCHed...
JUVS HTC Enlarge Start Menu
HTC WMP Touch Skin
Moble Software Design, LLC FreeCaddie
J.S. Advanced Configuration Tool 3.2
Microsoft .NET CF 3.5
XDA-Team NEW M2D
Dustin
BTW Trjons thanks for your post.
be a hero post all your cabs or links
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
davewaave said:
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
Click to expand...
Click to collapse
Also, did you get rid of the AT&T bloatware on yours as well? On a quest for the perfect ROM myself, so I will keep watching the thread for more info.
Would like to see those links as well.
If you want to leave out the ATT bloat ware, after you go through the screen align, do a reset. It will fail to run the script for the **** add ons and then you have basically a virgin rom.
Cab files
Hey lazy people ! Here's a link to all my cabs:
http://rapidshare.com/files/239391014/Cab_Files.rar
I'm somewhat lazy too, so you're going to have to download all of them then pick through to get the ones you want. Enjoy!
Dustin
Thanks
Your're a hero! Thanks for the cabs
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WHOA! Virus detected "win32/virut" after extracting file then accessing folder with "glossy black bars.exe"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hopefully I've removed the infected file.
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Thanks so much, Dustin!!! I think I will be loading the AT&T 6.1 ROM again, following your fixes, and praying that my 2-PC ActiveSync problem somehow gets resolved along the way, too. (We need a "crossing fingers" smilie! HA!)
I'm just not looking forward to setting my Tilt up all over again. Must wait until I'm in the mood.
Dustintm said:
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Click to expand...
Click to collapse