Hi there,
I have done the two tweaks recommended to stop the screen going off during calls but now have the following situation:
The screen still goes off during calls, but if I turn the screen back on once, it will stay on for the duration of the call, a feature I thought had been introduced in the new official HTC ROM. I am still on 1.37.405.1 or something like that, the one that came with my Orange Diamond originally.
However, turning the screen back on only brings it back to a low-light status, as if the screen was locked..?
All very confusing. Anyone have any ideas?
Thanks.
I just rest my thumb on the touch sensitive centre button and my screen stays on, no tweaks .I am still on the Orange stock rom.
I also have this problem after doing the two tweaks.
Even upgraded to the 1.93 CHT rom.
Any one encountered this also ? Any solution ? Thanks!
http://forum.xda-developers.com/showthread.php?t=398265
Point no.8 would solve this problem
mitto said:
http://forum.xda-developers.com/showthread.php?t=398265
Point no.8 would solve this problem
Click to expand...
Click to collapse
No it doesn't, the screen still goes off right after starting the call.
Have you soft reset the device after you have edited the registry?
Tried both ways?
It works on my diamond.
It used to work but after upgraded to ROM 1.93.
The tweak no longer work. Any one have the same problem ?
I would have thought u need to reapply reg fix as when u update rom it restore orig settings
Originally Posted by L o r d R a j
Done.
This is what I did
* HKLM\Drivers\BuiltIn\RIL\BatteryTimeoutInCall set to = 0 default = 5
* HKLM\Drivers\BuiltIn\RIL\BatterySuspendTimeoutInCall to = 0 default = 5
* HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall to = 0 default = 0
* HKCU\ControlPanel\Phone Sleep to = 0 default = 1
* HKCU\ControlPanel\Backlight\LightSensorPollingEnable to = 0 default = 1
That done..
Restart the phone (I waited for a minute or so)
Backlight remains on now.
Then, just for the hell of it.. went back into the registry and set back the default values for:
lightsensorpollingenable
Phone sleep
Fast dormant
Checked again.. still works.
I decided to test all of those settings separate, the one that fixes it is the HKCU\ControlPanel\Backlight\LightSensorPollingEnable. All the others did nothing.
Related
the mute-when-flipped-face-down doesnt work!! (new phone)
so i checked for this in the registry according to this well-known-tweak:
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
but it is set to 1, so it should work, but it just doesnt.
I have it lying flat face-down on a very horizontal desk, but it still rings!
any suggestions?
thanks!
Flip off
I had the same misunderstanding. The flip ringer silence functions by turning the phone when it begins to ring and laying it face down. Hope this helps.
pilib said:
I had the same misunderstanding. The flip ringer silence functions by turning the phone when it begins to ring and laying it face down. Hope this helps.
Click to expand...
Click to collapse
hi m8!
thanks for your reply
1. then this whole function becomes much less interesting i think
2. i tried your suggestion: didnt work as well.
it should be nice to have it muted while display face the table but the real usage gives sense as well ... the phone is ringing you look who is calling and then put it back on table to mute it ... if you want to have permanent mute then simply activate vibrate / silent mode ...
babedieboe said:
hi m8!
thanks for your reply
1. then this whole function becomes much less interesting i think
2. i tried your suggestion: didnt work as well.
Click to expand...
Click to collapse
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
andres_lol said:
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
Click to expand...
Click to collapse
FaceDownMuteRing is set to 1 default (as i have it now) and it doesnt work now.
You say i should set it to 0: that doesnt make sense. 1 = true,
in this case meaning to mute when facedown......
Not?
Mine is set to 0 and does not work....
R
babedieboe said:
FaceDownMuteRing is set to 1 default (as i have it now) and it doesnt work now.
You say i should set it to 0: that doesnt make sense. 1 = true,
in this case meaning to mute when facedown......
Not?
Click to expand...
Click to collapse
i have seted in 1 and works ok, already check it
Mine is set to 1 and works, if i set it to 0 it doesnt work.
Seems like you have a duff phone there, id send it back for a replacement or get them to fix it.
ok - set mine to 1, did not work. Figured a reg change might need a soft reboot - which I did and now - IT WORKS
R
rakh1 said:
Mine is set to 0 and does not work....
R
Click to expand...
Click to collapse
Are you aware that this doesn't work if you are called and your phone is already facing down!? This function requiers you to flip the phone face down when you get a call (from the starting position when it is on its back). If it is facing down already you need to flip the phone 360 degreeds over its longest axis to mute it.
This function is not suitable for meetings in which you cannot be disturbed. In that case you need to put it on silent or vibrate mode manually in the config menu.
aware of that yes.
set to 1, reboot, tried
set to 0, reboot, tried
set to 1, reboot, tried
nothing works.....mmm
Do your accelerometors work? Does the web and photos move around the screen as you rotate the device? Does the ball game work?
I simply changed the value from 0 to 1 and reset.
Left the phone face up on my desk and called it. Then turned it face down and the ring was muted...
R
yes, the game works....
IT WORKS NOW!
i reinstalled (hard reset) and all ok now.......mmm
babedieboe said:
yes, the game works....
IT WORKS NOW!
i reinstalled (hard reset) and all ok now.......mmm
Click to expand...
Click to collapse
i tried it after 3 hard resets! each time worked only once till the first soft reset. after a soft reset the value in the registry stayed "tweaked" but with no effect.
Mine is set to 1 and it works gr8
mine works no problem... make sure you are using the new ROM's. (and btw having the phone so that it is silent when ever the phone is face down is silly, coz it may be in you pocket (or hand bag 4 women) and face down and then it wont ring... no good. the default method, of looking at the screen and then turning in face down is a good idea tho...)
I had the same problem - didn't work no matter what i did. Recently i updated the ROM to 1.93 and this fixed the problem. Works like a charm now.
205_lacoste said:
This function is not suitable for meetings in which you cannot be disturbed. In that case you need to put it on silent or vibrate mode manually in the config menu.
Click to expand...
Click to collapse
You can set this to go to vibrate automatically if you're in a meeting (that's in your schedule)
KukurikU said:
i tried it after 3 hard resets! each time worked only once till the first soft reset. after a soft reset the value in the registry stayed "tweaked" but with no effect.
Click to expand...
Click to collapse
kukuriku, my dear friend let me help you:
in the tweaks thread there is a mistake. registry should be 1 not 0 (like somebody already write here). that's also the default. use your head m8!
There are two listed tweaks for preventing the Diamond from turning the screen off during a call. I've done them both, and nothing happens. Are these tweaks confirmed to work for all phones, or just on some? It says the "Sleep" one works on european ROM -- do all European phones have the same rom?
I'm having a simmilar problem... It seems that the screen turns off after a set period of time... I thought that the light sensor was supposed to only shut the screen off when you bring it up to your ear, light gets dull... I have the phone sitting in well lit room and done got near it yet the screen still turns off..?
http://forum.xda-developers.com/showthread.php?t=406094&page=2
give it a shot
I've read that if you remove the stylus while in a call, then the note program comes on automatically, but the screen will also stay on until the call is finished
There are two listed tweaks for preventing the Diamond from turning the screen off during a call. I've done them both, and nothing happens. Are these tweaks confirmed to work for all phones, or just on some? It says the "Sleep" one works on european ROM -- do all European phones have the same rom?
Click to expand...
Click to collapse
there are more and they are the right ones. it is the light sensor. do a search. this forum has already too many posts on this subject.
here u have one that is called "(Solved for diamond) How to disable fast dormant display during call?"
http://forum.xda-developers.com/showthread.php?t=406094&highlight=Screen+call
PaulusUK said:
I've read that if you remove the stylus while in a call, then the note program comes on automatically, but the screen will also stay on until the call is finished
Click to expand...
Click to collapse
yes, you are right and this is in my humble opinion the best solution. this way even if u touch with yr ear/cheek the screen no funny noises and no unwanted programs popping up not to mention that this way u have the choice and if you don't need the screen it stays black.
If you want to turn your screen back on during a call just simply press the round center button once and it will turn back on. no need for any hacks.
Thanks for the help
From what I have read, the phone screen should only turn off the screen when you bring it up to your ear/there is low light on the light sensor in the handsets ear speaker... My phone's screen shuts itself off after 3 seconds or so, doesnt matter where light is... If you just disable fastdormant (1 to 0), does the phone still shut itself off after x seconds or does it wait until there is a change in light?
Can anyone confirm/clarify the above???
Also is it possible to reactivate the display once the phone detects a sizeable change in brightness again? From reading the links posted, no one has found a solution for this one yet..?
The screen will not turn off as long as you continue to touch the center button during call. The default setting work fine with me until I need to get information during a call yesterday. The center button touch allow you to use other functions during phone call.
[EDIT] STRANGELY ENOUGH, AFTER ENTERING THE REGISTRY AND JUST LOOKING AT THE VALUE OF THE KEYS HAS SOLVED THE PROBLEM BELOW...
[/EDIT]
My problem is that my phone won't go into the sleep mode when calling. Covering the phone doesn't help (I've tested the light sensor, and that still works)
For me this feature is a positive thing so I would like it to work again.
The registry entry for the EnableFastDormant is still on "1". The HTC Phone Skin is loaded (without that skin it doesn't work either).
When searching the forum I come across people who want their screen to stay on... I want the opposite to happen again. Anybody a suggestion?
205_lacoste said:
My problem is that my phone won't go into the sleep mode when calling. Covering the phone doesn't help (I've tested the light sensor, and that still works)
For me this feature is a positive thing so I would like it to work again.
The registry entry for the EnableFastDormant is still on "1". The HTC Phone Skin is loaded (without that skin it doesn't work either).
When searching the forum I come across people who want their screen to stay on... I want the opposite to happen again. Anybody a suggestion?
Click to expand...
Click to collapse
Check this reg entry as well:
HKCU\ControlPanel\Phone\Sleep - 1
HKCU\ControlPanel\Backlight\LightSensorPollingEnable - 1
HKLM\Drivers\BuiltIn\RIL\BatteryTimeoutInCall - 5
HKLM\Drivers\BuiltIn\RIL\BatterySuspendTimeoutInCall - 5
Also,
Start - Settings - System
Power
Advanced
Check the following:
Turnoff Backlight if device is not used for 30 Sec
Turn off Device if not used for 40 sec
All the best
Note: After changing Registry Entries.. (if you had to).. do a soft reset.
205_lacoste said:
[EDIT] STRANGELY ENOUGH, AFTER ENTERING THE REGISTRY AND JUST LOOKING AT THE VALUE OF THE KEYS HAS SOLVED THE PROBLEM BELOW...
[/EDIT]
Click to expand...
Click to collapse
Problem solved by looking at the values...
wow.. now that has to be the BEST and the EASIEST TWEAK IN HISTORY!!
L o r d R a j said:
Problem solved by looking at the values...
wow.. now that has to be the BEST and the EASIEST TWEAK IN HISTORY!!
Click to expand...
Click to collapse
I know... However, it bothers me as it doesn't really show realiability. Why didn't it work in the first place!? I'm experienced enough to know that I didn't do anything to the registry.
205_lacoste said:
I know... However, it bothers me as it doesn't really show realiability. Why didn't it work in the first place!? I'm experienced enough to know that I didn't do anything to the registry.
Click to expand...
Click to collapse
**** happens mate... no point in beating yourself over it.
Besides - it's WINDOWS - since when did Windows care about RELIABILITY.
Chill.
Let's just hope it keeps working.
Problem with 1.93 ROM
Hey,
I cant seem to get the screen to stay on during a phone call using Asia WWE 1.93 ROM....
I have got BattTimeoutIncall = 0
BattSuspendIncall = 0
Phone\Sleep = 0
EnableFastdormant = 0
but the screen still turns off if i leave the phone sitting on the desk under light exactly when the call time ticks over to 4 sec (0:03 to 0:04)...
Ideas anyone, is this an issue with v1.93 rom?
Thanks.
this works!
Does this still enable the light sensor???
Still want the light sensor to work - i.e. turn off the screen when i bring it up to my head...
NightWolf88 said:
Does this still enable the light sensor???
Still want the light sensor to work - i.e. turn off the screen when i bring it up to my head...
Click to expand...
Click to collapse
i dont think it disables it, but you can enable it either way with diamond tweak.
Blazeitup123 said:
i dont think it disables it, but you can enable it either way with diamond tweak.
Click to expand...
Click to collapse
Thanks for that
It works, but when I enable the light sensor polling in reg it goes off after about 4 secs... This is with a very bright light and no movement of the phone (sitting on flat surface)...
the only on of thos I see in my reg is HKCU phone sleep
where the hell are the others?
alexfendi said:
If you want to turn your screen back on during a call just simply press the round center button once and it will turn back on. no need for any hacks.
Click to expand...
Click to collapse
This is actually the best option because it turns off the screen when you want to conserve battery life.
So I just press the Center button when I want to see the screen to use the keypad or speakerphone.
Also, I have disabled the phone shade (curtain) by doing this:
Code:
HKLM/Software/HTC/Phone/PhoneLockEnable = 0
Hi guys,
I've tried looking thru the settings of my phone for locking my phone after certain duration but i couldn't seem to find it. is there a way in the phone? cause sometimes i get too busy to even hold on to the 'end key' for 3 secs and and just dump it into my pocket. ended up it goes to other programs or something else.
hope you guys can point me in the right direction. i also found 3rd party software to do this but is there a need to?
anyway i'm not refering to getting timeout to the password screen.
Personally, I didn't find this kind of feature too,
but there is a nice app, that will do this for you
http://forum.xda-developers.com/showthread.php?t=412418
Automatically lock your Diamond --> HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Delay device autolock: HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockTimeout -> Change the Dword value (30 = 30 seconds, etc)
http://forum.xda-developers.com/showthread.php?t=398265
ah... apparently i didnt look hard enough for the possible tweaks.
i was trying out maniac's auto keylock. didnt quite suit me.
thanks a lot guys
SurfHost said:
Automatically lock your Diamond --> HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Delay device autolock: HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockTimeout -> Change the Dword value (30 = 30 seconds, etc)
http://forum.xda-developers.com/showthread.php?t=398265
Click to expand...
Click to collapse
ok for the first tweak i understand what it meant.
but what does the second tweak do exactly?
Its suppost to delay the autolock for the specified amount of seconds after the backlight turns off.
I'm having this problem with backlight. No matter what I do, the screen automatically dim after 10-12 seconds. I've turned off the all "Turn off screen after so many minutes" (on battery or on AC). I've changed the backlight settings and it still revert.
I've even watch the backlight setting moved back to minimum from max after that 10-12 seconds.
I can't figured out what is overriding the setting. I don't have much installed:
WM 6.1 with
HTC Home
HHC
BatteryStatus
TouchPal
Wizard_reTOUCHed_Dialer2
Any thoughts?
Settings->System->Backlight & Settings->System->Power
To control BACKLIGHT settings, i.e. Backlight Brightness, Backlight timeout, etc, go to:
Settings->System->Backlight
...and check OFF the checkbox in the "Battery power" tab...or leave it checked ON and adjust the timeout
To control SCREEN settings, i.e. when does the screen turn OFF COMPLETELY, etc, go to:
Settings->System->Power
...and check OFF or adjust the timeout for the timeout that takes the device into standby mode
note that the above two settings applets are linked to each other from within via the Menu softkey
if you have already done BOTH of the above, i've no idea why your backlight dims so quickly
You have batterystatus installed and if you go to the preferences in it you have backlight as an option adjust your settings in there.
msg1285 said:
You have batterystatus installed and if you go to the preferences in it you have backlight as an option adjust your settings in there.
Click to expand...
Click to collapse
Sweet! That was it. Thanks for the tip.
I don't have batterystatus installed. I do have pockettoolman but it uses regular power and backlight settings.
My issue is even without any reset, the backlight setting automatically resets to default 10s. I change it to 2min, but at some point it will reset itself to 10s. This is without reset or turning phone off. I don't know y it does this but its very annoying!
Any ideas? Thanks.
I am having the same problem as well here... the backlight timeout will automatically reset to 10sec everytime you switch on the phone (not soft/hard reset, just normal power on). I am using ATT Tilt with the offical WM6.1 ROM.
Tried to change the setting directly in Registry using Resco, still the same problem. The value got reset to 10 on the next power on.
Wondering if anyone got a solution to this?
(maybe it's a problem for ATT tilt only....some users posted the same problem in the official ATT forum
http://forums.wireless.att.com/cng/...thread.id=99891&view=by_date_ascending&page=8 )
I'm having similar problem with back light and also it is very annoying when screen goes black and kills wifi and gps. is there way to keep wifi and gps on when backlight goes off? thanks.
WM6.1 dutty's WWE rom, Att Tilt
ATT Tilt Backlight Fix {Maybe}
I have to put this here
"Making registry changes incorrectly can cause system-wide problems that may require you to re-install WM6.1 to correct them. Making changes at your own risk."
=======================================================
Well here some settings to try:
HKCU\ControlPanel\BackLight
There are several settings here with the word "Timeout" in them:
Assuming External Power
===================
ACTimeout
ACTimeoutTemp
ACTimeoutTempUnchecked
Assuming In Battery
=================
BatteryTimeout
BatteryTimeoutTemp
BatteryTimeoutUnchecked
Make them all 300 for 5 minutes
Now one interesting one...
AutoSensor try changing 1 to 0
Test run....
==================
Power on/off using switch etc..
Performed soft-reset using stylus...
Display did not timeout after 10 seconds... But is did appear to power off after 5 minutes...
To soon to say how long this will last, but it definately appears to have made a difference and now seems to last longer. Something like 2 or minutes. Go figure
I was pretty happy with the new AT&T 6.1 Rom until this problem came up. The ROM is fast, the battery life with the 1.65xxx14 radio is good.
After a couple of days trying to fix it based on some solutions I found on the internet, I have given up.
No matter what I did, it always came back even with just having exchange push mail and total commander installed only.
Reverted back to WM 6.0 just because of this problem that was very annoying...
Now I am having a problem flashing a different hard spl instead of the 3.56 on my phone for WM 6.0.
Anyway, so, has the problem come back yet?
Thx
Oz
Still no solution to this problem? I'm a little afraid to try registry hack but am getting desperate.
I also now notice volume resetting issues...volume will change on its own accord to different settings...
The registry tweak fixed problem.
Only changed the first batterytimeout to 96 (2 min).
It now timeouts after 2min and survives a soft reset.
Thank you!
tkellytpa said:
I have to put this here
"Making registry changes incorrectly can cause system-wide problems that may require you to re-install WM6.1 to correct them. Making changes at your own risk."
=======================================================
Well here some settings to try:
HKCU\ControlPanel\BackLight
There are several settings here with the word "Timeout" in them:
Assuming External Power
===================
ACTimeout
ACTimeoutTemp
ACTimeoutTempUnchecked
Assuming In Battery
=================
BatteryTimeout
BatteryTimeoutTemp
BatteryTimeoutUnchecked
Make them all 300 for 5 minutes
Now one interesting one...
AutoSensor try changing 1 to 0
Test run....
==================
Power on/off using switch etc..
Performed soft-reset using stylus...
Display did not timeout after 10 seconds... But is did appear to power off after 5 minutes...
To soon to say how long this will last, but it definately appears to have made a difference and now seems to last longer. Something like 2 or minutes. Go figure
Click to expand...
Click to collapse
Back light issues Mobile 6.1
I have the TILT with 6.1 installed.... My backlight with default to 10 seconds also.. alog with that when I Turn the phone ff using the power button, if I sit there and watch it the backlight will come on with a black screen. Just backlight for no ryme or reason... I also have the issue of the screen brightness going full bright on me. All of these issues have really taken a toll on my battery life. Any thoughts from anyone...
I found that for some reason (probably Battery Status?) my backlight would always revert to 7-seconds when on battery. Every time I changed it via the control panel applet I could then go and see the value in the registry getting changed to 7. If I manually changed the value in the registry it would always revert to 7 after a short while.
I found that removing the 'BatteryTimeout' entry from the registry (HKCU\ControlPanel\BackLight) and not touching the Backlight control panel applet (or changing Battery Status) prevents it being automatically updated to 7-seconds and applies the default of 30-seconds.
I am not sure if this will work for you as there seem to be variable results, however for me this works perfectly. I have all my defaults set in my custom ROM so I never need to change Battery Status or open the Backlight applet and the default 30-seconds for the backlight is set.
Andy
Here is a link to a cab to address this issue
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
jgatlin1 said:
Here is a link to a cab to address this issue
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
Click to expand...
Click to collapse
Just to confirm I have just extracted the 'backlight.dll' file from the update posted on HTC's website and cooked it into a ROM, replacing the original 'backlight.dll' and it does indeed solve the problem.
I have played around with the backlight control panel applet and opened and closed Battery Status and the delay remains at what is configured - 30-seconds in my case.
Andy
ADB100 said:
Just to confirm I have just extracted the 'backlight.dll' file from the update posted on HTC's website and cooked it into a ROM, replacing the original 'backlight.dll' and it does indeed solve the problem.
I have played around with the backlight control panel applet and opened and closed Battery Status and the delay remains at what is configured - 30-seconds in my case.
Andy
Click to expand...
Click to collapse
Scratch what I said in my previous post. With this updated .dll file the behaviour of the backlight is worse. I have done some testing today with the updated 'backlight.dll' file cooked into a ROM and it's painful. No matter what I try the registry values 'ACTimeout', 'BatterTimeout' & 'timeoutsaved' are ALWAYS reverted to a value of 8 once the keylock has been applied. In my case either by Battery Status (keylock on resume) or pressing the today screen icon. This results in the backlight dimming after 8-seconds when on either battery or AC, the only way to resolve is to either go to the backlight control panel applet or edit the registry directly. Hit the keylock though and your back at square one
I have now re-cooked my ROM and replaced the 'backlight.dll' for the previous one and the behaviour returns to normal. So my advice is don't install this patch or cook it into your custom ROM.
Andy
ASCIIker said:
To control BACKLIGHT settings, i.e. Backlight Brightness, Backlight timeout, etc, go to:
Settings->System->Backlight
...and check OFF the checkbox in the "Battery power" tab...or leave it checked ON and adjust the timeout
To control SCREEN settings, i.e. when does the screen turn OFF COMPLETELY, etc, go to:
Settings->System->Power
...and check OFF or adjust the timeout for the timeout that takes the device into standby mode
note that the above two settings applets are linked to each other from within via the Menu softkey
if you have already done BOTH of the above, i've no idea why your backlight dims so quickly
Click to expand...
Click to collapse
Thanks so much for this post. I have been trying for days to get my back light to stay on and nothing worked. As it turned out I was only doing the setting in the backlight tab, not the in the power tab.
Finally!
Click Here for the .cab that fixed my unit. I got it off the ATT forum.
NOTE to all... Even this fix did not solve my problem until I checked the boxes to time the backlight. I like the backlight feature on all the time. If I don't want to see the screen, I turn it off.
Hi Guys.
Ive tried a several things to prevent the screen switching off during any phone-call. I tried:
The registry hack (total commander)
1) HKLM\Drivers\BuiltIn\RIL\BatteryTimeoutInCall set from 5 to 0
2) HKLM\Drivers\BuiltIn\RIL\BatterySuspendTimeoutInCa ll from 5 to 0
3) HKLM\Drivers\BuiltIn\RIL\EnableFastDormandDisplayD uringCall from 1 to 0
--------------------------------------------------------------------------
and i have the Advance configuration tool, where the setting is:
Phone sleep during call: not allowed
fast sleep during call: disabled
more often is it annoying me that the screen turns of, seems that i cannot have the freaking thing to do what I want
Your help is much appreciated !!
Rom: 1.93.404.1
I am using Diamond Tweak 0.5 for this specific setting, and it works a charm
or http://forum.xda-developers.com/showthread.php?t=413798
I have the latest Orange 1.93 ROM, and in a call if the screen goes off, remove the stylus and the screen comes back on and stays on.
PaulusUK said:
I have the latest Orange 1.93 ROM, and in a call if the screen goes off, remove the stylus and the screen comes back on and stays on.
Click to expand...
Click to collapse
Put the stylus back in during the call and the screen drops back into sleep mode according to your power save settings. Pull the stylus back out and the screen comes back on and stays on again.
Neat eh?
gonna try the "solutions" that are mentioned here, keep you posted !
and many thanks for your reply's !