Hello,
After a long day my Diamond is almost flat. In the car I load it with an original HTC loader which gives 1,2 mA. When using Tomtom and phoneing in the car the Diamond does not recognize anymore that it is attached to a loader.
Only a reset will set the diamond to loading again. Disconnecting and connecting does not work. Anybody the same problem?
Related
I have a problem with my touch diamond. The battery of my diamond is fully charged, the battery-indicator shows around 100%. If I do an reset by pushing the resetbutton the batterystatus goes down by around 50%. If I reset the unit a second time, or even reset the diamond when the batteryindicator shows around 50% after normal usagetime the indicator goes down to 1% after the reset and the diamond turns off.
The second problem is that it seems to be imposible to use my diamond as a car navigator for more then 3 hours even if the diamond is connected to a car charger.
The diamond is connected to the car charger, the screen shows the charging icon. If I turn on navigations the battery drains constantly and is not recharged. After around 3 hours the unit turns off. That car charger I used with a touch cruise before without any problem.
Is that a normal beheavior or have I a defekt unit. If that is normal, can I resolve the problem by flashing an cooked rom? At the moment the unit runs with the german shipping rom.
Greetings Stefan
stefex said:
I have a problem with my touch diamond. The battery of my diamond is fully charged, the battery-indicator shows around 100%. If I do an reset by pushing the resetbutton the batterystatus goes down by around 50%. If I reset the unit a second time, or even reset the diamond when the batteryindicator shows around 50% after normal usagetime the indicator goes down to 1% after the reset and the diamond turns off.
The second problem is that it seems to be imposible to use my diamond as a car navigator for more then 3 hours even if the diamond is connected to a car charger.
The diamond is connected to the car charger, the screen shows the charging icon. If I turn on navigations the battery drains constantly and is not recharged. After around 3 hours the unit turns off. That car charger I used with a touch cruise before without any problem.
Is that a normal beheavior or have I a defekt unit. If that is normal, can I resolve the problem by flashing an cooked rom? At the moment the unit runs with the german shipping rom.
Greetings Stefan
Click to expand...
Click to collapse
i flash my rom and the battery is much beter now
Hi
I have the setting for the HTC Diamond to power off / turn off after two minutes on both battery and power (in Settings).
These work fine when the Diamond is by itself or plugged into a wall charger, but when plugged into the USB cable to activesync, it doesn't turn off.
Anyone know how to have the Diamond turn off completely after 2 minutes? I was able to do this with my previous I-mate JAM and E-Ten X500+....
Also i have this problem with TP. Have you found any solution?
Hi All,
My kaiser white screened for a while,
now it starts up with
"Smart mobility" with no rom or radio infio (in red) show.
it then shuts off.
I can Enter the "hard reset mode"
and I can Enter BootMode
KAIS130
SPL-3.28.Hard
CPLD-8
(Tri-color)
I can falsh with differnt roms, OEM, Duttys etc. (FLASHING IN SPL_BOOT)
After a flash 100% it resets, or just shuts off.
Have Also Copying a Rom file to a SD card and loading off that. same story.
Still no Rom or Radio info Posted.
HELP!!
same here!
Hi,
since yesterday exactly the same problem here, Kaiser shows smart mobility screen, then after 3-7 seconds it turns off. It might be the battery (but the battery has been fully charged when that occured) and I measured battery voltage under load (inserted in Kaiser and during first seconds of switching on) is app. 3,7V?
Does anybody know the pin assignment of the KAIS160 battery? Outside pins is minus and plus 3,7 Volts, but what are the 2 inner pins for?
I already tried to supply 3,7 Volts to the outside connectors for battery, but the Kaiser does not show anything at all if voltage is applied.
Any ideas? Thanks,
christianji
sent to service - not repairable
Hi,
sent my device last week to the german HTC service arvato. Today I received a letter which states that the main PCB is damaged/broken by external force. I do not remember any situation where the PDA dropped or fell down or was twisted.
The tytn can not be repaired. Bad luck.
Any experience with accomodation at HTC for the replacement of my tytn II?
christianji
hi,
I have a ipaq 6510 that was not use for a while. I put it to recharge a whole night, but what I get is just a blinking startup screen (that one with the hp logo and the 1.40 somethign version ...)- it's coming on for 1-2 seconds, and going off again ...
I've tried now just with the charger, without the battery, and it's showing me that the device has power, but I can't start it up.
I also tried soft/hard reset.
can anyone help ?
- I got it in bootloader mode, and after that somehow it started up
I will come back later with details if everything is working fine
If the battery voltage drops below 3.2V it will not be possible to charg the device.
go to a gsm repair shop and ask them to charge your battery.
Hi friends,
I have new HTC HD7, i bought it yesterday. First, i put it in charge for 3 hours, after that i turn it on, but after 5 min it restarting by it self!!
And now the mobile is still restarting & i cant go inside the mobile!! I just can see the boot screen with HTC logo!!!!
And when i put it in charger i didn't see the light that is charging !!! I tried the charger & the USB from my laptop!!
could any one tell me why is that?? & what is the problem & how can i fix it!!!
Regards,
send back for warranty.Normally when you plug in your device to your wall socket or pc it will go to htc logo and go to windows screen.