problem update wm6.1 tytn 2 - Tilt, TyTN II, MDA Vario III General

Dont work update my device tynt 2. *** error ***.plss hellp me.
my device : rom 1.56.405.5
rom date 08/28/07
radio version 1.27.12.11
protocol version 22.45.88.07H
about my device : Windows Mobile 6 Profesional ,CE OS 5.2.1620(Build18125.0.4.2)

cobrapsp said:
Dont work update my device tynt 2. *** error ***.plss hellp me.
my device : rom 1.56.405.5
rom date 08/28/07
radio version 1.27.12.11
protocol version 22.45.88.07H
about my device : Windows Mobile 6 Profesional ,CE OS 5.2.1620(Build18125.0.4.2)
Click to expand...
Click to collapse
can you be more specific? This is extremely vague.

1) What exact error do you get? At what stage of the upgrade?
2) Can you still boot your device or not?
I guess and I hope you have a full recent backup to restore your data. If not and if it is not too late, first do a full backup with Sprite Backup or a similar software.
Without further details, I assume your upgrade from WM 6.0 to 6.1 was unsuccessful.
If this is correct and after a full backup of your data, just do a hard reset and try again, closely following the instructions. I also needed to do it more than once before it was OK.
Good luck.

Related

a big problem in bluetooth on my XDA IIS

PLZ can anyone help me??
a very serious problem :x
every time i turn on my bluetooth on my xda IIs and after 15 seconds it turns off automaticly and gives me a warning window which says :
(( BTTrayCE Sorry ! Bluetooth can no longer be used because the license is expired .
BDA : 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8
i upgraded the rom but the same problem still appears
can u help me please
Which rom do you use ?
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1337.42
EXTROM VERSION : 1.31.139 WWE
there are some thngs that you may do, you may try hard resettng the device (power+reset), or you may try rom upgrade, there are newer roms available
i tried to upgrade to other roms
also i tried the hard reset many times
the same problem
it's a very strange problem
:roll:
you can download bluetooth stack only and install it you can find it in ftp
now i upgraded to rom :
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1.12.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.40.237 WWE
and still the same problem in bluetooth :?
Try tmobile NL 1.42 rom extrom 1.42.119 i am sure it works
i will make simple explaination for upgrade procedure so if you make a mistake we can figure it out more easy
1. download the rom from here
2. extract it using winrar to your computer
3. download MaUpgradeUt_noID from here
4. extract it to the same folder in which you extracted the rom
5. put your device into bootloader mode (pressing power+reset+record buttons at the same time until "Serial" shows on display)
6. put your device in the cradle
7. run MaUpgradeUt_noID.exe
8. after upgrade press reset to leave bootloader mode
that is all
please post if that was helpfull
Thanx for Help But i still have the same problem in bluetooth
now i have this ROM :
ROM VERSION : 1.42.00 WWE
ROM DATE : 09/05/05
RADIO VERSION : 1.13.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.42.119 WWE
Now i'm thinking if it is a hardware problem coz i made all the software solutions .. :?
any way TANXXXX 4 ur Help

I need an old rom

Hi guys I haven't time to install all my software again and I have a Sprite backup, but I need a copy of the 1.11.00 ROM to install ..... otherwise the restore from Sprite won't work (or so I understand).
The Rom I need is
1.11.00 WWE
01/27/05
Radio 1.00.00
Protocol version 1337.39
ExtROM v 1.11.162 WWE
The reaosn I'm going to have to re-install is that the camera has disappeared and some other odd things are happening.
If somone can point me to the right download I'd be very grateful
Mike
Hi, be sure to read the correct Sprite FAQ BEFORE you change your ROM as you will need to run the upgradedata util on the old ROM in order for a smooth restore to the different ROM
http://www.spritesoftware.com/faq.php

Pls help - XDA & Error 100 (Upgrading to WM5)

Hi,
i was using xda 2s, with WM5 (old-build) and several months ago, unaware followed this link:
http://forum.xda-developers.com/showthread.php?t=274505
somehow, i've managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
ROM date : 03/10/05
Radio: 1.12.00
Protocol ver: 1337.42
ExtRom: -blank-).
running this version the Bluetooth cannot run, 'license expire'.
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error:
Error 100: Model ID Error 25-N-10-N-N
("the ROM image that you are trying to use is not designed to work with your divice. please check the vender web site and download the correct ROM update")
then tried to run with MaUpgrade, it seem work, but no upgrade at all.
Somebody pls help..
Thank you very much.
u need to use MaUpgrade_NoID instead. it should be on the wiki website somewhere.
also remove the SD card from the slot before doing the upgrading.
Unfortunetely, MaUpgrade_NoID did not work..no upgrade at all..
is it normal if 'Ext ROM : -(blank)-'?
from Start - Settings - System - Device Info
thank-u

Help XDA2s CID preventing me from upgrading with official rom

Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
However, i am stuck halfway. Here is my Devicetype.txt file description. Only managed to get the Devicetype as PH20B, Language ID = WWE. The rest of the info I can't really make out.
Also, when i use the file : xda2nbftool -t -x,
it gave a warning for ms_.nbf
The rest of the files such as nk.nba and radio.nbf were ignored. See pic.
How do i get the rest of the hex addresses for the radio and nk files ?
Could someone help to generate the final nbf files for me or help advise ?
The Official ROM file versions are here :
English ROM
ROM: 1.40.00 WWE
Date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM: 1.40.923 WWE
MMS: 2.0.0.21
BT: 1.0.0 Build 3900
Can anyone help ?
More information on my existing XDA2s firmware :
ROM Version : 5.04.09.WWE
ROM Date : 11/02/06
Radio Version : 1.15.00
Protocol Version : 1337.45
ExtROM Version : (Left Blank)
Never really heard of ROM Version 5.04.09.WWE. And SDIO Card is not detected. Would like to downgrade to the official ROM as i suspect that the SDIO Drivers are not installed in the existing ROM.
Also, i tried using XDAtools\OSimagetool to copy another XDA2s firmware to this XDA2s. But it failed to write generating an error in the pic. Status of Activesync is connected.
mtnbikefreak said:
Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
Click to expand...
Click to collapse
I'm afraid you have read the wrong homework. Those directions are for the Himalaya & Andes, not the angel.
What OS is on the phone now? That will help point to the correct directions needed to reflash the phone.
Flashing to 2003 from WM5 or 6 will vary depending on if the extended ROM has been resized, etc.
Check the angel getting started in the wiki (It's working now)
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
Oh ... thanks for pointing that out. To answer more questions :
It's running on a generic Windows mobile 5.0. I have a feeling that the Ext rom is already corrupted as the gsm portion of the phone is not functioning properly. I'll do a readup and revert my results. Thanks.
here's the thing. if you have a problem with the CID... all you have to do is find the exe file here named MAUpgradeUt_NoId.exe... use that instead of the exe provided in your Official Rom, i guess that would be WM2003se you are installing.
afaik, extrom havent have a thing to do with the GSM.
Thanks for the reply.
Thing now is that i am trying to downgrade from wm2005 to wm2003 (o2 official asian rom v1.42) But then looks like i am trying in vain.
Tried to do what is in the directions for wm2005->wm2003 by setting it to bootloader mode, doing a hardreset and using maupgrade_no_id with the official nk.nbf
But then it hangs while the check is being done. The xda2s screen shows v2.08 and serial. It changes to usb once the usb cable is plugged in.
Is there any other method i can do to downgrade it ?

ERROR 101

Sorry for my very bad english.
I have BA upgraded from W2003SE to WM6 (Helmi BA WM6 R0).
ROM Version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version:
I'm trying to upgrade Radio to 1.15.00:
MaUpgradeUt_noID:
Your device software is about to be update from:
Device radio image version: 1.12.00
To:
Radio image version: 1.15.00
Click update to continue.
and then...ERROR 101. CONNECTION ERROR...Click exit to quit
I'm using Windows Vista and XP. The same message in both systems.
The same problem with this SO roms:
- BA ROM CE OS 5.2.19199 (Build 19199.1.0.0 PV DVH) 16MB PP
- RUU BA xplode WWE 6.10.00
Please, help me....
try to upgrade in "BOOTLOADER MODE".
press record+powerbutton then softreset while holding them. that will give you a "Serial X.xx" and if you plug it in the usb/cradle, it will turn into "USB X.xx"... then try the upgrade/flashing again.
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
entolium said:
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
Click to expand...
Click to collapse
Mine has ever shown any existing version, only shows what the new one will be. All my flashes have been fine. Did you try to continue and actually get an error, or did you stop when it "did't find your pda" ?
Win XP, Activesync 4.5 running
In Bootloader Mode (usb v2.07):
- Run upgrade
"Checking the information in your device...."
"Device CE image version: <empty>"
To "CE image version: <empty>"
- Click Upgrade
"Checking the information in your device...."
...........nothing.......i kill the process in task manager
In normal mode:
- Run upgrade
"Checking the information in your device...."
"Device CE image version: 5"
To "CE image version: 6.10"
- Click Upgrade
"Checking the information in your device...."
"ERROR 101. CONNECTION ERROR"
SOLVED
I'm SOLVED !!!!!!
I'm removed the SD card and ok
im glad you solved it.
just fyi...
you can continue flashing in bootloader mode even if the upgrade software doesnt show your current ROM version, just like Kasush said. it doesnt matter.

Categories

Resources