Related
Frat.. My fully upgraded Tilt (Dutty Rom 6) got its USB port damaged while I accidentally poked the stylus in there instead of the reset hole.
...now it won't sync with my pc however does charge only when I plug in the dedicated wall charger into it. So, on visual inspection, I saw the 5 pins (thats how many they seem) with last two next to the reset hole "misaligned".
I've tried poking a needle and trying to straighten it back into place but didn't work and I gave up fearing further damage to the port.
basically, I called At&t and they are mailing me a replacement device but now I'm not sure if I would need to re-flash the original AT&T rom back before returning.... anyone have any experience in the returns field? The cust serv rep "read" me a disclaimer (felt like hearing my rights by a cop!) stating that if they find any liquid or other damage to the phone then I may be charged $497.00 for it as it would be considered as warranty voided.
So, no mention of any s/w changes in the disclaimer she read to me also resulting in the same. But I surely don't want to take a chance therefore am humbly asking for some input from someone who may have experience similar situation?!!
Reading the "Tilt re-flash due to not voiding warranty if having to return" sticky-thread's all 14 pages did not give me even a single post where anyone can confirm if at&t will indeed consider messing up with the s/w as voiding warranty.... unless ofcourse I'm blind..(has happened once in a while).
I've also searched on this and have not found any posts.. again, I'm mentioning this so that the mods and/or others won't burn me for not doing my homework.
Wouldnt it be easier to flash a stock rom from SD card than wait and see if they void your warranty?
Sane said:
Wouldnt it be easier to flash a stock rom from SD card than wait and see if they void your warranty?
Click to expand...
Click to collapse
Well.. I'm trying to avoid flashing the stock rom altogether. As I've noticed almost every 2nd post on the stock-rom-flashing-for-warranty sticky not having a smooth run while returning the phone to its original state.
besides.. what do you mean by "then wait and see if they void your warranty?"..
Thats exactly what I'm trying to avoid in the first place as once I mail the unit back I will have no control on the outcome unless ofcourse either someone confirms that not reverting back to the stock rom won't cause a $500 hole in my pocket or otherwise, in which case I'll have to re-flash it.
If you've flashed a different ROM then they will know and they will say you caused the damage and charge the full price for it.
they might charge you full price anyway because the usb port is damaged. it might just be easier to fix the port urself...
I know Pocket PC Techs can repair the connector in most cases:
http://www.pocketpctechs.com/main~u...T+Tilt+Sync+Connector+Replacement+Service.htm
AWESOME!!
PsyOpWarlord said:
I know Pocket PC Techs can repair the connector in most cases:
http://www.pocketpctechs.com/main~u...T+Tilt+Sync+Connector+Replacement+Service.htm
Click to expand...
Click to collapse
Thanks a million for the site. I had no idea that a service like that existed and that too specifically addressing my exact issue. I'm gonna keep it bookmarked for future.
Fortunately, I was able to stick a needle in one of the pins and push them up and then have it held there with a dab of super glue. So far, its working like a charm but if it ever fails again I'll go the above route.
This is awesome.. I was very concerned in having to receive the replacement unit as with experience of having used several pda phones over the years I've learned that the refurb units that the warranty replacement give you is got a good 50-50 chance of having some kind of hw or sw flaw.. so... I'm glad to have kept my phone.
Took mine right back to the ATT store for a damaged usb port, all they did was confirm it wouldn't read via the usb and exchanged it right there for a new one, i was told it was a 1 year replacement warranty on the phone, they didn't check a thing, give it a try, i have also exchanged one that was erased buy getting to close to a mag drill at work, although it was not a tilt they exchanged it without even batting an eye, thanks tjenus
tjenus said:
Took mine right back to the ATT store for a damaged usb port, all they did was confirm it wouldn't read via the usb and exchanged it right there for a new one, i was told it was a 1 year replacement warranty on the phone, they didn't check a thing, give it a try, i have also exchanged one that was erased buy getting to close to a mag drill at work, although it was not a tilt they exchanged it without even batting an eye, thanks tjenus
Click to expand...
Click to collapse
Hi tjenus,
You mean you brought the faulty tilt, together with the original accessories it came with, to the store and they replaced your set for a brand new, retail version, of the tilt?
What else was required, the receipt or anything?
Thanks!
Gerald
tjenus said:
Took mine right back to the ATT store for a damaged usb port, all they did was confirm it wouldn't read via the usb and exchanged it right there for a new one, i was told it was a 1 year replacement warranty on the phone, they didn't check a thing, give it a try, i have also exchanged one that was erased buy getting to close to a mag drill at work, although it was not a tilt they exchanged it without even batting an eye, thanks tjenus
Click to expand...
Click to collapse
I call BS after being a AT-T customer for years I know for a fact they don't swap out phones even at corp... Stores they tell you to call in and have a warrenty replacment shipped to you. Thats just how it works UNLESS your withen the 14 day grace period then they would probably do it. The reason they do this according to AT-T is they don't have enough stock in each store to do swap outs. You best bet is to call AT-T and have them ship you a new one and flash abck to the origanl rom they don't check the SPL version what so ever they just look if it has water damage and any other visable signs of abuse.
I returned mine
I had this same thing happen. The USB failed to work after I dropped my phone. So seeing how I could not reflash it, I ran out all the power on it, until it had nothing....it would not even boot. With all the battery drained, I knew that even if they plugged it in, they would not see I had flashed the rom....though they could have used a new battery. I took it in, and told the local ATT reseller that the USB stopped working. It was within 30days of purchase. They took it back and exchanged it no questions asked. They didnt even test it. Now, i just wont drop my new one, lol.
Good luck.
Not entirely related, but for those who purchased an HTC TyTN II and try to have it repaired in the US, beware: it is not covered under warranty here. After just under 4-weeks I found the USB port was loose and would no longer take a charge. After more than 4-weeks in HTC America and after refusing to accept their assessment of "User Abuse" and the $300 mainboard repair cost, they finally shipped it back to me, mainboard replaced via Fedex Ground... according to several HTC America reps I spoke with - there have been numerous similar cases reported to them since the TyTN II debut two months ago. Perseverence may pay off -- although I should have known better, my next purchase won't be through a parallel importer.
Cheers
hah. did this too.. called at&t and had them warranty exchange it. i just bent it back around with the stylus enough that it would work so that could revert back so i could send it back. havent heard anything from them.. so im assuming there not gonna charge me
aquanaut88 said:
Not entirely related, but for those who purchased an HTC TyTN II and try to have it repaired in the US, beware: it is not covered under warranty here. After just under 4-weeks I found the USB port was loose and would no longer take a charge. After more than 4-weeks in HTC America and after refusing to accept their assessment of "User Abuse" and the $300 mainboard repair cost, they finally shipped it back to me, mainboard replaced via Fedex Ground... according to several HTC America reps I spoke with - there have been numerous similar cases reported to them since the TyTN II debut two months ago. Perseverence may pay off -- although I should have known better, my next purchase won't be through a parallel importer.
Cheers
Click to expand...
Click to collapse
i own a tytn 2 in the usa and got the same from htc. my usb got messed up a little on its own than i stuck the stencil in there and it barely worked(had to wiggle it) anyways i found a repair center but they didnt have parts. ordered the parts from ppc techs and they sent me a different connector. its the same one in the sprint mogul which i think is a better build. so they replaced it and everything is perfect with the charging now but they did something with my hinge. its off a little. can anyone point me in the right direction to take my phone apart so i can fiddle with the hinge? any help is greatly appreciated
Hi,
I just got a Tilt from craigslist. The phone came with the At&T box, but unfortunately I forgot to get the receipt. Now the USB port is broken and I want to see if I can return for warranty.
The phone still has the AT&T ROM and infact I havent unlocked it. So will this be a problem if I just say I dont have the receipt but the rest and returned it with the box?
Please help!!!
ramnan said:
Hi,
I just got a Tilt from craigslist. The phone came with the At&T box, but unfortunately I forgot to get the receipt. Now the USB port is broken and I want to see if I can return for warranty.
The phone still has the AT&T ROM and infact I havent unlocked it. So will this be a problem if I just say I dont have the receipt but the rest and returned it with the box?
Please help!!!
Click to expand...
Click to collapse
Not unless you are the original one that bought it from AT-T they will say sorry buddy !! you could try but I would save my breath
Hi
I had the same Issue - but it was fixed inside warranty!
But I was runing "original" rom.
But the somehow made the "reset" button work strange now - So it will go back once more.
BR
Daniel
Please respond to...
http://forum.xda-developers.com/showthread.php?t=362679
I've installed a few ROMs from this place onto it. I did not SuperCID (just used a HardSPL bypass) it nor SIM Unlock it.
Does this mean that I should be able to undo everything that has been done?
How do I remove HardSPL? Is that possible?
How can I install an original AT&T ROM on it? Where do I find those? I think I found one with Alex's Kitchen, but I'm not sure if that's a full version or what. And what about the AT&T bloat?
Sorry if this is a noob question. I glanced through the Tilt-specific Wiki and the Kaiser Wiki and I didn't see the answer to any of these questions in the FAQs.
see the wiki, there's a howto link for reverting your spl
Oh, awesome. I missed that. I think it was because I was mainly looking through the Tilt-specific Wiki. My mistake.
Here's the thread in case someone else happens accross this one in search of the same advice.
http://cleanimport.xda/index.php?threads/335568/
Just install the original AT&T Rom and you should be fine. I had to send mine in for a warranty exchange last Friday after the radio conked out on it, and got my new one on Monday of this week. Anway, I used the HardSPL too, and I just reflashed the AT&T Rom onto it, put it in the box, slapped the return label on it and sent it on it's merry way
Edit-Somebody on here said they don't check the SPL when they get the defective unit, just that it has the AT&T Rom on it. In fact, I bet they just chuck it in the recyling bin and write it off.
Yeah I'm pretty sure they half inspect the phones. They must get more exchanges than they could deal with. They possibly check the device thoroughly though because it's a high end (dollar) device. Who knows?
I worked in the service department at Best Buy for a while, and I know we didn't check anything when customers returned products. All we did was looked at the stickers on the outside of the products to make sure the serial number, model number, etcetera all matched up, and that was it. As long as those matched up, we could send the devices back to their manufacturers or out to our service centers.
I figured AT&T would operate the same way, but from what I've read on these forums, they do a pretty thorough check. I just wanted to make sure I covered all grounds. Better safe than sorry, y'know?
Yeah, that's true. The guy at the store looked my phone over, and even changed SIM's and agreed something was wrong with the phone's radio, so that's in the notes too.
I found the post I was talking about, it's the first on on the page-
http://forum.xda-developers.com/showthread.php?t=335568&page=23
"Just FYI; I recently returned my 8525 to ATT because it was not charging with the car charger.
I flashed back to the latest ATT ROM and then did a second hard reset. I heard last week from ATT the phone was accepted as a core with no problem.
I was told by a friend at ATT that they don't look at CID, but different splash screens will for sure trip up a return.
Just my experience; hope it helps someone."
Warranty issue?
The touchscreen of my phone is not working. Good thing is that i bought it just 8 months before so i guess its still under warranty? (is it?)
After looking around in the forum i get it reverted back to original locked state and now i want to get my warranty from ATT people. Can you please let me know how to proceed? And if anyone has already done this then what steps he followed? Do we need to send our phone back first and then get the newer phone? Or do they give us the newer phone and then we need to send them the older one back?
ceo.mtcl said:
The touchscreen of my phone is not working. Good thing is that i bought it just 8 months before so i guess its still under warranty? (is it?)
After looking around in the forum i get it reverted back to original locked state and now i want to get my warranty from ATT people. Can you please let me know how to proceed? And if anyone has already done this then what steps he followed? Do we need to send our phone back first and then get the newer phone? Or do they give us the newer phone and then we need to send them the older one back?
Click to expand...
Click to collapse
Just call AT$T, they will check your account to see if you are within warranty. If your problem is within warranty guidelines, they will send you a new (refurb) tilt or if you press, a new (refurb) Fuze ( I would rather have the Tilt ) It usually arrives within five days. It comes with a pre paid return envelope. Take the battery and sim and back cover off the old phone, put them in the new phone. Drop the old one in the envelope. Drop it in the post and you are all set.
If you fail to send the old one back within the time allotted they will bill your account of the full value of the replacement phone. Quick and easy, my replacement phone is over a year old and has worked flawlessly.
My Tilt is maybe 8 months old and decided to stop charging the other night. Unfortunately, I installed a Manila 2D ROM on it some time ago and because it will not recognize the USB cable, I can't roll it back. I'm going to call AT&T today and see about having a replacement shipped to me. I don't think it'll be a problem since it won't turn on and it'll probably be a mail replacement like you described. I'm going to press to get a Fuze, when I ordered the Tilt I paid good money to get it new instead of refurbished and it still stopped working after well under a year of use. If I'm getting a refurbished replacement I'd like the newest model.
KentM said:
My Tilt is maybe 8 months old and decided to stop charging the other night. Unfortunately, I installed a Manila 2D ROM on it some time ago and because it will not recognize the USB cable, I can't roll it back. I'm going to call AT&T today and see about having a replacement shipped to me. I don't think it'll be a problem since it won't turn on and it'll probably be a mail replacement like you described. I'm going to press to get a Fuze, when I ordered the Tilt I paid good money to get it new instead of refurbished and it still stopped working after well under a year of use. If I'm getting a refurbished replacement I'd like the newest model.
Click to expand...
Click to collapse
Unless of course it is a battery issue, and they put in a new battery, see that you have used unapproved software and mark your S/N as immediately out of warranty,.....................I'm just sayin................................
You think that's an issue even exchanging it through the mail?
KentM said:
You think that's an issue even exchanging it through the mail?
Click to expand...
Click to collapse
Do you think they stay in business by by just mailing a new phone to anyone who says, " this is broken, give me anew fuze ?'
I just exchanged my tilt today. My screen broke (the colors became all white and inversed and weird) so I called ATT and they told me to go to this special service warranty store. They looked it over quickly and gave me a new tilt no problem... just make sure you flash the original ATT rom back on it. (They didnt notice I broke the VOID sticker in the screwhole hehe)
PS. I got my tilt last April, and I'm not sure how long the warranty lasts. The guy said I have 90 extra days on this new phone.
denco7 said:
<snip> If your problem is within warranty guidelines, they will send you a new (refurb) tilt or if you press, a new (refurb) Fuze ( I would rather have the Tilt ) </snip>
Click to expand...
Click to collapse
Just out of curiosity, why would you rather have the tilt? I've been thinking of upgrading from the tilt to the fuze...
d_stew said:
Just out of curiosity, why would you rather have the tilt? I've been thinking of upgrading from the tilt to the fuze...
Click to expand...
Click to collapse
Basically , you can have a brand new Fuze the way AT$T and M$ want it, or you can have a Tilt the way you want it. At present there are three times as many custom roms, more ways to customize it and I absolutely will not give up my Tilt screen. After a year of customizing my Tilt to perfection on this site, there is absolutely nothing about the Fuze that interests me.
I'm thinking about sending my Tilt back. It's bricked for some reason. I bought a new (OEM) battery because I thought I had battery problems, still nothing. If AT&T gets a phone that won't even power up what happens, I have hard spl and a flashed rom?
adstevenson said:
If AT&T gets a phone that won't even power up what happens, I have hard spl and a flashed rom?
Click to expand...
Click to collapse
If they manage to resusitate it or even read the flash memory contents (if it's possible to hotwire a car, who knows what can be done with a TyTN II and both of these would be possible), then when they see it's not running an approved ROM/SPL they may act like a bull and charge!
Anyone who runs a custom ROM on a phone thats still under warranty runs that risk should a problem occur that makes it difficult to flash back to original spec.
denco7 I agree entirely with your comments re the importance of a tilting screen but now HTC have developed the Touch Pro 2 (which has a tilting screen) there may soon be a real successor for the Kaiser released to the market. I don't know which providers will pick it up or where it'll be sold though.
Flying Kiwi said:
If they manage to resusitate it or even read the flash memory contents (if it's possible to hotwire a car, who knows what can be done with a TyTN II and both of these would be possible), then when they see it's not running an approved ROM/SPL they may act like a bull and charge!
Anyone who runs a custom ROM on a phone thats still under warranty runs that risk should a problem occur that makes it difficult to flash back to original spec.
Does the same thing apply if it's not under warranty but has insurance from at&t on it?
Click to expand...
Click to collapse
Just wondering if anyone can share there experiences with the exchange program through att..like what HAVE you gotten away with and what HAVENT you gotten away with and got slapped with the $500 charge lol
I followed the the warranty return thing on this forum, and I got no problem. I had seriously scratched the screen of the phone. I told the manager before sending it to quote she said its "normal wear and tear." But my speaker of the phone was messed up. On that same phone the void button and some ddamage as I was playing with it, I didn't what it was, until I found out later that its to open up the phone.
So, I got away with two major linear scratches on the screen which made writing with the stylus impossible. And I had damaged the button. But I told the manager of this before I sent it in. Or the High_end PDA department.
pazookie said:
Just wondering if anyone can share there experiences with the exchange program through att..like what HAVE you gotten away with and what HAVENT you gotten away with and got slapped with the $500 charge lol
Click to expand...
Click to collapse
what did they find wrong with the phone???
i just sent one they sent me, the first time, i put it into the boot loader and noticed that the SPL was HardSPL, it scared me a little and well the screen cracked while i was looking at it an hour later, the phone rang so i looked and the caller ID and suddenly there was a broken screen on my tilt. not sure if they are gonna say anything about hard SPL but it came that way.
(part of me hopes i was holding someones old phone from this site)
oh yeah and this probably shoudn't be in ROM developement, ask a mod to move it to general
oh im just wondering..i was reading a post about putting the old att spl back on for an exchange and someone replied about how theyve returned 6 tilts with major problems all of which should fall outisde of warranty so i just thought id ask as i have a slight problem myself but its not keeping my kaiser from working and i opened a ticket with HTC directly as they dont screw you if you fall outside of warranty...my usb charger was getting a full contact and i had to bend it up and down to get it to stay charging (shoulda just sent it in then lol) and finally the plastic seperator of the pins broke out and then i bent in a pin a few times and that broke off..so i opened it up and soldered it back in and it eventially popped off again so i was thinking i could just squeeze the plastic piece that broke off back in as it wont come out unless you use needle nose pliers and sliding that pin back in..
I did a warranty return not to long ago. Phone was stuck with the radio from hell 1.65.17.10 and didn't have the friendly FrankKaiser that Jockyw2001 developed. Never had an issue with AT&T saying that I had altered the phone in any way. I flashed back to the original shipped ROM. Change the SPL to 1.56 the original one that it came with. I then re-flashed the original shipped ROM. When the ROM flash completed at 50% I unplugged the phone. This way on the phone will only go to the bootloader.
I actually just did a warranty return again today. Had some scratches on the screen that were really bugging me. There weren't big but definitely a nuisance for me. Told them the phone was stuck on the bootloader, or as I put it in "in this three color screen with Red, green, white." They issued a warranty replacement right away.
AllTheWay said:
I did a warranty return not to long ago. Phone was stuck with the radio from hell 1.65.17.10 and didn't have the friendly FrankKaiser that Jockyw2001 developed. Never had an issue with AT&T saying that I had altered the phone in any way. I flashed back to the original shipped ROM. Change the SPL to 1.56 the original one that it came with. I then re-flashed the original shipped ROM. When the ROM flash completed at 50% I unplugged the phone. This way on the phone will only go to the bootloader.
I actually just did a warranty return again today. Had some scratches on the screen that were really bugging me. There weren't big but definitely a nuisance for me. Told them the phone was stuck on the bootloader, or as I put it in "in this three color screen with Red, green, white." They issued a warranty replacement right away.
Click to expand...
Click to collapse
yeah cause we don't know about the magic we can do with the "pretty rainbow screen" come on ATW you let a few little scratches bug you. i'm still waiting for them to send me one that works, i've sent back three and i still have the original that i bought. two broken usb ports and a broken screen good job at&t for being incompetent
Has anybody done a warranty replacement and convinced them to send a new one and not a refurbed?
kareem9nba said:
Has anybody done a warranty replacement and convinced them to send a new one and not a refurbed?
Click to expand...
Click to collapse
actually yes, well they say they will be sending it when the get the phones i just sent back. i talked to Christina and she told me that the phone they will send me next will be the tilt as it comes out of the box, including the software cd, usb cable, stylus, battery, and back cover. i will confirm when i recieve it but they tell me it will be brand new
Well, after I figured out my ROM issues. My phone had some problems with continuously soft resetting. I suspect a bad memory block. I made it clear through out my conversation with the rep that I took really good care of my phone and that I don't know how people can throw their 400 dollar phones around like they are nothing. I also made a point to say my battery seemed to be going bad and that I had done some research about Li-Po batteries going bad and that this seemed to be a classic case. I asked if there was anyway she could send a battery with the phone. (Just so you know, when you call warranty replacement, it seems to me they have two options, send a refurb, or send a full kit) So, she said she could send me a full kit and it is otw now. That is a good thing because my phone wont boot now. I think whether you get caught with a bootloader that is different than OEM kinda depends on who receives the phone on the other end. I'm sure they are SUPPOSED to check that, but I'm sure they can get away with not checking it, and I'm sure there is no incentive for checking it.
tubaking182 said:
yeah cause we don't know about the magic we can do with the "pretty rainbow screen" come on ATW you let a few little scratches bug you. i'm still waiting for them to send me one that works, i've sent back three and i still have the original that i bought. two broken usb ports and a broken screen good job at&t for being incompetent
Click to expand...
Click to collapse
They could have said F.U., you broke it we are not resposible.
My phone got stuck in bootloader while doing a rom update.Called AT$T, they sent me through three techs, my answer to all there suggestions were " did it ", " did it ".
Three days later, they sent me a refurb ( in perfect condition ), in the box was the phone, a return mailing label/postage, even a new piece of tape to seal the box. Put the phone in,sealed the box, put on the label, dropped it in the mail box. End of story. The new/refurb has worked great ever since.
Could not have been easier or more pleasant.
So far it has been very positive even when my phone was technically out of warranty they replaced my TILT (not a cheap phone)
I have done 4 returns via mail and 1 by going to a local AT&T Warranty exchange center. NO PROBLEMS, I did revert back to original ROM but I am sure they didn't check. store replacement was in and out in 25 minutes. ( 10 minutes after my phone was looked at they just gave me a new one ).
AT&T You do have great warranty service I will give you that.
so all sounds good i should just stick my device in bootloader mode and send it back?
i can only revert back the rom as i cant sspl it so it shows hardspl AND security unlocked at the top..think thatl make a difference?
My miniUSB port was broke, wouldn't charge or sync most of the time. I called AT&T told them what was wrong and they said they'd send me a replacement. Once the replacement got here, I reverted my phone back to at&t ship specs, sent it back to them and all went well.
My girlfriend and I both had the Hermes, unlocked w/ cooked rom. They physically broke to a point it was hard to revert them back, but eventually was able to, we got 2 brand new Kaisers for $50 a piece. I'd love to know if I can 'loose' this phone and get a new kaiser for another $50 then sell the one i've been using for a couple of months for 2 or 3 hundred. If anyone has done this or knows how let me know!
I recently had to send in my Tilt and recieved a refub in the mail and everything went very smooth. Customer service was good and fast.
just returned 2 8525's and they sent me a tilt, first 8525 white screen problem, second one wont continue installing rom above 12%. awesome hardware warranty service.
wow they upgraded you to a tilt, thats amazing
warranty
as long as the phone isnt in more than one piece and the liquid indicator under the battery is white there should be no problem. Keep this in mind also. It all really depends on who receives it when you send it in. Everyone views physical damage, wear and tear, etc in their own terms even though there is a standard measure for it. Some let things go and others will say that a wear and tear scratch is damage. Generally you can get away with a bit as long as the phone doesnt look like a dog to it. No broken screens. No screens with pressure cracks (internal cracks). The screen is usually the biggie.
when i first got my kaiser i joined this site.. days later i BRICKED my phone, i had all types of apps and crap on my ppc. SO i went over to my original at&t shop and the dude called my bluff of "i dunno why, its not working". So i took my device and the next day went to another at&t shop with my brother. I walked in flirted my ass off with the ugliest sales rep i found.. and man this chick was beastly, and was able to swap out my device and get a new 512mb mem. card .. with no problem. i didnt even have a reciept, i just talked my way thru and SHAZAM!
Hi guys. I've been a member of this forum for a fair while now and you guys are the most helpful, wonderful and pleasant people to ask appropriate questions to, so I pray that a fellow statesman can help me with this problem.
I hooked up my TyTn II to my PC yesterday and noticed it wasn't working, trying everything software didn't help. I pulled the USB cord out and to my surprise, the furthest right pin was pointing a little bit wrong. So, I spent an hour carefully moving it back in place, connected it up, worked.
I have two methods of hooking up, one to my PC and another to a wall charger that came with my BluANT Bluetooth Car Kit. After reading that non-standard ports on anything other than an official HTC product can bend and damage pins because of the way they are designed or somesuch, I became a little paranoid.
But, everything was working fine.
Until this morning.
The furthest right pin was ON TOP of the pin to the left of it. I spent another hour moving it back in place, tried to plug it in to the computer, didn't want to go all the way in. I did not jam it. I did not push it. Looking at the pins I saw that the furthest right has completely ****ed itself. I can't see exactly if it's snapped or just bent right around, but it won't sync and it won't charge.
Fonebiz are apparently the HTC repair people in Australia, is it possible that the whole chargeport can just be replaced and I can have my phone back relatively soon?
Answers as soon as you can guys, I really can't go without a phone for long.
P.S. It's Friday and I'm getting an engaged signal everytime I call their Adelaide office.
Please help me.
EDIT: I am using a cooked ROM, running Touch Commander so it all looks legit on the surface, apart from the boot screen. I am hoping that this doesn't get the phone sent straight back to me, because it's a hardware issue. Am I correct?
darkstarwastaken said:
Fonebiz are apparently the HTC repair people in Australia, is it possible that the whole chargeport can just be replaced and I can have my phone back relatively soon?
Click to expand...
Click to collapse
I'm not familiar with what repairs that company undertakes and how quickly but certainly if you've been reviewing these forums for a while you'll know there are plenty of companies elsewhere that offer a broken USB port repair service. There really is something wrong with whatever you're plugging in to your TyTN II or how you're doing it. I've had mine since they first came out (bought it here in the UK at the end of September 07) and haven't had a single problem with the port despite regular usage of my charging cradle, non HTC official AC Adapter (the original HTC one blew up after a couple of weeks and 4 recharges), 3-in-1 USB adapter and 3 HTC Headsets. All pins are still straight as a die and connections rock solid. I'm careful not to get any dirt in it and always gently plug in the device straight on.
EDIT: I am using a cooked ROM, running Touch Commander so it all looks legit on the surface, apart from the boot screen. I am hoping that this doesn't get the phone sent straight back to me, because it's a hardware issue. Am I correct?
Click to expand...
Click to collapse
If you're wanting it repaired under warranty there are instructions in the wiki about restoring your device to it's 'as from the factory' state and you could use the micrSD method to restore all except your spl - that final step needs a working USB port (one of the risks in running a non-official setup while under warranty). I don't know what your chances are but I suspect a little better if only the spl is non-official than the whole lot (irrespective of what it looks like on the surface). Even if you have to pay for the port to be replaced though, as long as it's just a case of soldering in the new connector, that service doesn't cost the earth (at least from the American website I saw offering the service).
In all honesty Kiwi, I think the guy I bought the phone from didn't take care of it in the short time he had it.
But I got a TyTn II for $250 AUD. I'm happy to spend $80 odd to get it repaired in a neighbouring state.
Thank you for your words of wisdom, I am having it repaired as we speak.
I've had my tilt for a little over two years now and it seems the hardware has finally gave in. About two weeks back, the phone repeatedly got got stuck in a white screen when returning from sleep mode (as identified here: search "white screen issue"). I chose to dismantle the phone and replace the flex cable with one I had salvaged from my friend's dead tilt. Fortunately the white screen went away. In turn, I lost the use of the memory card slot, the touchscreen functionality only worked in landscape mode, and worst of all my sim card is no longer identified. Trying to revert back to my old tilt's flex cable gave me a empty screen all together. My question is, whether I should purchase both a new flex cable and screen or whether a flex cable alone will do? Moreover should I take a chance and dismantle an old tilt sold on eBay? Or just buy a new cable shipped all the way from China as there seems to be no US sellers? Any and all advice is welcome.
Sounds like you may have a loose/bad connection plug, need to recheck assembly.
The old ribbon probably failed completely due to extra stress during dissembly.
Parts from china are mostly copy parts & the quality is normally awful, buying a salvalge phone is a good option if price is right.
For sure a few forum members will have Kaiser spares.
Mister B said:
Sounds like you may have a loose/bad connection plug, need to recheck assembly.
The old ribbon probably failed completely due to extra stress during dissembly.
Parts from china are mostly copy parts & the quality is normally awful, buying a salvalge phone is a good option if price is right.
For sure a few forum members will have Kaiser spares.
Click to expand...
Click to collapse
Thanks for the response, but I disassembled time and again to check the connectors with the utmost care mind you . After some thought, I decided the salvage phone was not a a good option as those may have severe wear on the cable as well and I'm not willing to wait around for a week for the item to arrive to find its dysfunctional (or nearing its fate). Fortunately, I found a legitimate eBay seller in NY who has the new flex cable. Hopefully if the phone recovers, I will update for those who might come upon this thread and have found themselves in a similar situation.