Hello,
I've flashed my Diamond with bElite 0.97 premium (& radio rom .5), and now, my screen image is vibrating. This is very light, as if pixels are randomly moving very fast from 1 pixel to another in an horizontal move. Like a refresh rate problem, or a screen hardware problem (overheat ?).
My diamond worked perfectly during 15 days before this flash.
I tryed to flash the 0.97 basic, slightly better, but still vibrating.
Does anybody have this problem ?
I removed the battery during 10 minutes, and it seems really better now.
May be overheating with flashing.... strange... very strange
During flashing, brightness seems set at maximum, may Diamond didn't like to be a maximum brightness a long time ...
Thought it was a bootloader problem with SOME diamonds.
Try a (newer?) bootloader.
No, I use 1.40 Olinex.
If I flash bootloader, storage will be erase, no ?
Do you know a bootloader which can correct that ?
My solution is simple : when it arrives, I turn off the screen, and turn it on 1 second later... and everything is ok.
does it happen when you diamond is plugged ?
It happens for me too, and i think it is after a reboot (soft) while it is connected to my PC.
this exact same happend to me after flashing my phone. i fixed it by re-flashing with a different spl. it's something to do with the screen updates in some of the devices.
SPL that worked for me OliNex Unsigned HardSPL 1.37 , then i ran the ROM flash again and all fine..
olstar said:
this exact same happend to me after flashing my phone. i fixed it by re-flashing with a different spl. it's something to do with the screen updates in some of the devices.
SPL that worked for me OliNex Unsigned HardSPL 1.37 , then i ran the ROM flash again and all fine..
Click to expand...
Click to collapse
Yep - same here. Fixed with Olinex SPL 1.37.
Related
Hi all,
I have a Spanish Vodafone P3600. (S300). I've run into problems while updating the radio ROM and several other things.
I've managed to change the SPL, all versions, no problem. Even the hard SPL. The problem arises with almost ALL ROMS and ALL RADIO ROMS. I put the PDA in bootloader mode and I begin the updating process. Well, it stays at 0% all the time, both in PC screen and PDA screen. When I am tired of waiting (more than 30) minutes, then I have to take the battery off. The PDA goes into bootloader and I have to apply the unbrick procedure.
I have only been able to put the FAMAN 3.5 Spanish ROM (WM6) so the PDA works when I unbrick it. However, it does not have RADIO ROM and it shows "no GSM" at boot and obviously I cannot use it as a phone.
Is it broken? Why can't I flash the radio ROM? Somebody with a similar problem?
Thank you all very much in advance.
Best,
Unsolvable problem
Thanks all for the feedback. Pof was kind enough to address the problem.
I ditched the radio bootloader (not the regular bootloader) and a a result I cannot flash the radio. It seems that the phone has to be sent for repair.
"if it works... don't touch it" I should have paid attention to this
I recently upgraded to the official 1.93 WWE ROM (and new hard SPL), and now my screen flickers a lot when the phone is switched on. (The flickering starts at boot-up when the red writing appears at the bottom-right of the screen).
I have been able to solve it so far by pressing the power button twice to switch the display off and back on again, but wondered if anyone else had experienced this and could suggest a more permanent fix?
Thanks,
Neil
Most likely who hasnt experienced this.....lol
Anyway, when you get this after a reset, just turn on and off the display and all goes back to normal.
You need to flash another hard spl. The issue is caused by an outdated spl not being compatible to your lcd screen. Try hard spl 1.37 found here:
http://forum.xda-developers.com/showthread.php?t=400950
I want to flash
_QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
to my UK Vodafone Diamond which has SPL 1.37 from the factory.
Which Hard SPL should I use - 1.37? Signed or unsigned?
djvw said:
You need to flash another hard spl. The issue is caused by an outdated spl not being compatible to your lcd screen. Try hard spl 1.37 found here:
http://forum.xda-developers.com/showthread.php?t=400950
Click to expand...
Click to collapse
Thanks! I tried searching for "flicker", but got too many results and didn't find that thread.
i have the flickering screen too, i want to try this method but my activesync does not work. i try a hard-reset and now the device ask me to insert Getting STarted Disc to install synchronization software which I did. it still doesn't work. anyway to do this?
Thanks
i have the same problem i flashed the 1.93 hard SPL and still nothin... anyone know the problem?
i did managed to get the flikering out... flashed hard spl 1.38!
I want to try flash HardSPL but my USB port doesn't work, is there anyway to do this?
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Before I flashed my first rom, I read wiki.xda-developers.com to make sure I understood what I was doing, and used the search button, instead of risking turning my phone into a paper weight.
Since then, Crackwhore has written a very helpful post at the top of this forum about how to use HSPL and USPL to allow you to flash roms.
yeah i know all that. not my first time flashing a phone but the first time it got stuck loading the bootloader. and specially when i´ve only used the HTC update.
darfor said:
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Click to expand...
Click to collapse
you mean you couldn't get to boot loader page?
So you already have HSPL 1.56 installed (or have SPL1.54 and used USPL)?
If you have HSPL you could try renaming the .nbh file to blacimg.nbh and copying it to the SD card and entering bootloader
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
AFW said:
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
Click to expand...
Click to collapse
try dnloading the rom again amd try.
the file might be corrupt
Have tried that many times. File is not corrupt. I'm getting really worried this is now a brick...
OK, if you can get phone into bootloader, it is not bricked
What does your SPL say in bootloader? Do you get any errors when trying to flash rom? Are you using USPL or HSPL? If USPL, you have to use it before every flash to new rom or radio. If HSPL, are you using correct version?
Was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes (Vista64) for a split second and then nothing else happens. The Vista64 system's USBs work with THD and have been used to sync over past few months.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Your SPL says 1.54.0000. When you try and run USPL.exe have you remembered to disable your antivirus?
Have you tried usb method instead of card for flashing rom?
I know you have said that youi have used usb for syncing, but when in bootloader does it change from 'serial' to 'usb' when you connect HD to PC?
Fallen Spartan - I want to thank you for taking the time to help me resolve this problem. Very much appreciated!
1. Yes, anti-virus disabled and indeed removed from the PC.
2. Yes, have tried the USB method at least 20 times.
3. Yes, the bootloader changes from Serial to USB. It then goes to the progress indicator screen and hangs on 0%. The progress indicator on the RUU on PC also stays at 0% and eventually times out. I've gone through the Recovery routine at least 20 times, with no luck.
When I try to run SSPL-Manual-TouchHD.exe it says "not a valid Win32 application".
I'm a bit perplexed by this.
You have obviously successfully flashed Duttys V3.9 so drivers are fine, you know how to use USPL, both flashing methods (SD card and usb/pc), disabled anti-virus, phone in bootloader.
Have you tried to reflash 1.56 rom or possibly performing a hard reset before trying to use USPL or HSPL. I doubt this would make a difference though.
Have you tried cRaCKwHoRe's USPL GUI v 2.5 Application?
You don't get any code errors?? I'm struggling to find a solution here.
Yes, this is most vexing. I've flashed innumerable times before and never had an issue. I suspect the SPL is fine, but somehow the actual WM ROM image is corrupted. Will now try to load Std 1.56 ROM image again...
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa (though I'm a rugby fan).
AFW said:
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa.
Click to expand...
Click to collapse
No accomodation required, just glad you got it sorted
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
can anybody help me at all
Adamsville: perhaps you're stuck in bootloader mode because the WM ROM image flashed on your system has become corrupted or disabled, ie the only thing the system can boot into is the bootloader.
Try flashing a new compatible WM ROM image and see if that works.
AdamsvillE said:
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
Click to expand...
Click to collapse
a hardreset followed by a 1.54 base rom will solve all ur probs.
or lower spl to 1.14 cos ur stock rom is a 1.14 base as suggested by th name..
cheers
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?
i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore
can somebody help me I just wanna know how i set back to standard rom or what you call it
the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers
yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.
Read this:
http://forum.xda-developers.com/showthread.php?t=505377
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..
i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading
Has this been resolved? Or do you still require help?
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip
k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?
it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S
..........
My HTC Diamond have some trouble: Every time I turn it on, it boot to splash screen and then restart, then go on splash screen and restart again, again, and again.It dont boot to Windows.
I am using 2.03 WWE ROM anh tried to reflash so many rom, both Rom ship and cooked rom but still no hope.
I tried to downgrade its SPL from 1.40 Olinex to original SPL as following thread: http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
But not work, in tri colors screen is still 1.40 Olinex
So anyone pls help, I love my Diamond so muc, dont let it dying like this. PLS...
I do MTTY everytime i flash new ROM
well, has happened to me before, I just take out the battery and leave it out for couple minutes and then should be ok, try starting it when is on the charger, also hard-reset is always an option. I think that is softwware based problem.
cheers
My diamond also started doing this yesterday night, it was working fine until now. I have flashed it with Donsalaris rom which came out Xmas last year and its been working fine for over 6 months now.
Then yesterday night after a long chat it started to do this ??..
I tried taking out the battery still no good. I hard reset it and now works fine for sometime like a few hours to a few minutes and go into this restarting cycle again.
I'v left it on the table and out of the blue it will reset it selfs and start the cycle ?
Seems like a software problem but a hard reset should have solved it right ? But it only partially solved it
Anybody gott a clue as to what it might be ???