Database Develop

My MDA won't boot correctly anymore.

I was upgrading my MDA using the official mda update 2.26 and then the phone completely froze. When I soft-resetted the phone, it wont get off the T-Mobile load screen. I tried to hard-reset it using the voice+commanager to reset, but then it just goes back to the T-Mobile load screen. Can anyone help me? I also tried to flash the Wizard_Love on the 3 color screen but it keeps giving me error 200. Please I need your help.

wow no response to such a serous problem. I'm having the same issue I down loading and install to my storage card some files gps navi apps from the ppc freeware site. while trying the apps my device froze. I held down the power button and it didn't respond so I removed battery.but device won't lad pass the second start up screen. what do I do

collwatt said:
wow no response to such a serous problem. I'm having the same issue I down loading and install to my storage card some files gps navi apps from the ppc freeware site. while trying the apps my device froze. I held down the power button and it didn't respond so I removed battery.but device won't lad pass the second start up screen. what do I do
Click to expand...
Click to collapse
Remove the sdcard/minisd and do a hard reset.

Bricked?
Hi all,
i have similar problem like Lo0o0nG.
Tried to flash wm6 on my g3 wizard following the wiki:
Flashed the Button ROM "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM" but after rebooting the wizard stucks in the first screen with the beer glass on it - showing IPL 1.01, SPL 2.21, GSM 01.12.10 and OS 1.5.4.2.
Then nothing else happens...
Did this 6 or 7 times before with g3 and g4 phones - worked perfectly till now..
Are there any suggestions / any possibility to get my phone working again?
thx,
derHarry

If the phone is CID unlocked use the SD/mtty method to restore the full ROM image.
If it's not CID unlocked then try to unlock it with WST and reflash the ROM(s)

Thank you for your fast reply!
It's not CID unlocked, but WST can't connect to the device...
any other suggestions?

I'm sorry but WST can't connect unless the OS has booted already. I didn't realize it when answering.
I guess the only solution now is to use the commercial unlocking solution by IMEIcheck.co.uk

Thank you for your suggestions,
i think i'll replace the touchscreen from this bricked device with the broken one from my other device... so it's not that tragical
btw: how could this happen? did i something wrong while flashing?

derHarry said:
Thank you for your suggestions,
i think i'll replace the touchscreen from this bricked device with the broken one from my other device... so it's not that tragical
btw: how could this happen? did i something wrong while flashing?
Click to expand...
Click to collapse
Yes. I believe you flashed a ROM without permission (CID unlocking) or an upgrade went wrong (stopped before finishinfg) and now the bootloader 1.xx can't load the OS because the 2.xx address is different and can't be found.
cheers

kaiser stuck on tri screen is it a brick???

i hope this is where i should post this.
whilst using my phone it froze,so soft reset was done then it went into tri screen
my kaiser wont go out of tri screen.i have this on screen.
kais130 mfg
spl-1.0.olipof
cpld-8
after trying hard reset and soft reset it wont pass this screen,it loads straight back to bootloader mode.i had duttys 6.1 rom on and nikis radio.
is there a solution to this problem.all was fine until this.ive searched all over for the past week and i cant seem to find a solution,so a little help is called for.id appreciate any help if possable and thank you in advance

Are you sure that your camera-button isn't stuck? Try pushing it hard few times, and then boot again.

Try flashing an official rom onto it while on that screen?

hi tried new rom and camera button isnt stuck,it seems like theres something wrong with spl-1.0.olipof.after installing new rom it boots straight to tri screen.can olipro be tacken off.just thinking of other things to revert to normal.when soft reset done it goes straight to tri screen

Try HardSPL
Why not flash it with a different SPL - like any of the HardSPLs such as Jocks:
http://forum.xda-developers.com/showthread.php?t=396922
and then flash with a new rom, suitable to that SPL?
rgds, MN

Fyi, this issue is being discussed in lots of threads @ ROM Development... I do have the same problem.
http://forum.xda-developers.com/showthread.php?t=402562
http://forum.xda-developers.com/showthread.php?t=371154&page=9
... and this one being the most recently updated:
http://forum.xda-developers.com/showthread.php?t=393337&page=29

Just to point out that the problem is solved (I think) - read here -> http://forum.xda-developers.com/showthread.php?p=2415437#post2415437

problem screen image is vibrating

Hello,
I've flashed my Diamond with bElite 0.97 premium (& radio rom .5), and now, my screen image is vibrating. This is very light, as if pixels are randomly moving very fast from 1 pixel to another in an horizontal move. Like a refresh rate problem, or a screen hardware problem (overheat ?).
My diamond worked perfectly during 15 days before this flash.
I tryed to flash the 0.97 basic, slightly better, but still vibrating.
Does anybody have this problem ?

I removed the battery during 10 minutes, and it seems really better now.
May be overheating with flashing.... strange... very strange
During flashing, brightness seems set at maximum, may Diamond didn't like to be a maximum brightness a long time ...

Thought it was a bootloader problem with SOME diamonds.
Try a (newer?) bootloader.

No, I use 1.40 Olinex.
If I flash bootloader, storage will be erase, no ?
Do you know a bootloader which can correct that ?
My solution is simple : when it arrives, I turn off the screen, and turn it on 1 second later... and everything is ok.

does it happen when you diamond is plugged ?
It happens for me too, and i think it is after a reboot (soft) while it is connected to my PC.

this exact same happend to me after flashing my phone. i fixed it by re-flashing with a different spl. it's something to do with the screen updates in some of the devices.
SPL that worked for me OliNex Unsigned HardSPL 1.37 , then i ran the ROM flash again and all fine..

olstar said:
this exact same happend to me after flashing my phone. i fixed it by re-flashing with a different spl. it's something to do with the screen updates in some of the devices.
SPL that worked for me OliNex Unsigned HardSPL 1.37 , then i ran the ROM flash again and all fine..
Click to expand...
Click to collapse
Yep - same here. Fixed with Olinex SPL 1.37.

messed up my HD please help

I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me

k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?

i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore

can somebody help me I just wanna know how i set back to standard rom or what you call it

the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers

yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.

Read this:
http://forum.xda-developers.com/showthread.php?t=505377

great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%

k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.

k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..

i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading

Has this been resolved? Or do you still require help?

still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone

k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?

flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out

k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms

i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip

k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?

it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S

..........

Error 626 when hard spl

I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.

go to olinex hard spl section and write about your problem maby they can help u

Onlinex hard spl section?
I must be blind. Where is that?

matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here

matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.

Tried both checked and unchecked and dont work

I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS

Great!!! I will remember that one too.