The battery icon that used to be located in the task bar (or what it is called)
The one u can click to get "system status window" i can still click to get my system status but even there the battery icon has disappeared.
Can someone help me?
It might have something to do with The quickmenu i installed earlier.....but that is totally removed......hate it.
Please help!
try flashing the device with a new rom or same rom again.
Th3rm1t3 said:
The battery icon that used to be located in the task bar (or what it is called)
The one u can click to get "system status window" i can still click to get my system status but even there the battery icon has disappeared.
Can someone help me?
It might have something to do with The quickmenu i installed earlier.....but that is totally removed......hate it.
Please help!
Click to expand...
Click to collapse
Not exactly helpful but I have a comment - wish I could get rid all together I hate it takes up space for nothing batti is so much cuter and well positioned
sumitescp said:
try flashing the device with a new rom or same rom again.
Click to expand...
Click to collapse
Ok.....flashing right now. Thanx for the tip!
sumitescp said:
try flashing the device with a new rom or same rom again.
Click to expand...
Click to collapse
It worked until i installed spb plus.....it was that prog that f**ked everything up.
So i uninstalled it and now it works perfectly.
Thanx!
Th3rm1t3 said:
It worked until i installed spb plus.....it was that prog that f**ked everything up.
So i uninstalled it and now it works perfectly.
Thanx!
Click to expand...
Click to collapse
im sure sbp + don't work right with diamond yet
Related
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Re: Registry Wizard "exception" when I start it up
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Re: Registry Wizard "exception" when I start it up
ghostrida said:
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Click to expand...
Click to collapse
Thanks -- I had convinced myself that it was my fault, for first trying RegistryWizard without loading the OPENNetCF library to the MDA first. But if you got the problem too, then it sounds like a more substantial issue.
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
stormryder said:
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
Click to expand...
Click to collapse
Not sure what these are...is this something needed beyond the OpenNetCF install?
yeah, please elaborate on these "extra" dll files. I loaded the openNETcf to the main memory of my device, that was all i had to do in the past.
regiwzzzzzzz
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Re: regiwzzzzzzz
thanas said:
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Click to expand...
Click to collapse
Not sure if there's anything you can do short of a hard reset -- but that should be the worst I imagine. This will restore the phone back to what it looked like right after booting up the first time with your ROM installed.
thank god i fixed it love the worl
thanas said:
thank god i fixed it love the worl
Click to expand...
Click to collapse
How did you fix it?
first the call button after the hardreset didnt work for some kind of reason so i thought it wouldnt hard reset
What is SmartsKEy .... What does it do? and if installed previously then how do i remove it? it comes preinstalled in Molski's ROM. Some how it got curropted and it fails to start and shows error messages every now and then.
Tell me how can i remove it so that i can install it again.
thanx
I wish I could help, but I can't seem to read this post... it's definately not in english
GldRush98 said:
I wish I could help, but I can't seem to read this post... it's definately not in english
Click to expand...
Click to collapse
hahaha......
GldRush98 said:
I wish I could help, but I can't seem to read this post... it's definately not in english
Click to expand...
Click to collapse
now try to read it show is ENGLISH
yay!
Smartskey is a utility that allows the left and right softkeys to be turned in to the Start Meny and OK/Close keys when you hold them down. It can also change the volume slider to act has a page scroll slider and it can do some other things.
Your best bet would be to just reinstall smartskey... I'm no familiar with Molski's rom, so I'm not sure where/how he has it installed.
When you still receive errors even when you've uninstalled SmartSkey then you should look for a program called: CheckNotifications this will remove the error notification for you
If would have used the search you would have found the solution on this forum yourself Just a small tip...
lookie
I'm gonna try it right now.
ivanmmj said:
lookie
I'm gonna try it right now.
Click to expand...
Click to collapse
woooooooohoooooooo thanks man good luck
got it workin! yipee!
Tested. WORKS GREAT!!
Good Looking Out
Works like a Charm.
Now Ttran can use it for his next release.
can somebody tell me where i put these files and how i do this.. i have hard spl and using open touch v3.0
thank you
prelude91sit said:
can somebody tell me where i put these files and how i do this.. i have hard spl and using open touch v3.0
thank you
Click to expand...
Click to collapse
If you download the DLL, just place it on your windows directory, disable HTChome first, of course, then reenable it after replacing the dll in the windows directory.
prelude91sit said:
can somebody tell me where i put these files and how i do this.. i have hard spl and using open touch v3.0
thank you
Click to expand...
Click to collapse
ok if u have Open Touch.. Download the 2.1 cab.
install into ur device..
once u have it installed open Internet Explorer.
then Minimize Internet Explorer.. NOTICE I SAID MINIMIZE NOT CLOSE. "sorry for the caps"
and then just tap on the weather and it'll update..
u only have to open IE once. i guess that enables it.
where do i install or copy the files to? how do you minimize ei?
no **** sherlock im talking about what folder
prelude91sit said:
no **** sherlock im talking about what folder
Click to expand...
Click to collapse
Hey Dude.. if ur gon come in here with that attitude, with other peeps.. no one will help u out.. on the Real
and if ur talking about what folder u have no idea on how to run a .cab file do u? if u did u would know what he ment. and when i said INSTALL on the DEVICE
cangri87 said:
Hey Dude.. if ur gon come in here with that attitude, with other peeps.. no one will help u out.. on the Real
and if ur talking about what folder u have no idea on how to run a .cab file do u? if u did u would know what he ment. and when i said INSTALL on the DEVICE
Click to expand...
Click to collapse
i appreciate your help but i could care less what he posted cause it was useless.
so i just put the files anywhere?
prelude91sit said:
where do i install or copy the files to? how do you minimize ei?
Click to expand...
Click to collapse
Just download the cab. Run it. Run IE, don't close it. To minimize it, either set your... well, to make it simple, just click on start and then click on today. Then do your thing.
prelude91sit said:
i appreciate your help but i could care less what he posted cause it was useless.
so i just put the files anywhere?
Click to expand...
Click to collapse
One more time.
You INSTALL the CAB on the device. You don't place them on ANY folder, unless you download the dll itself. I realize that's what I said first. But that's because I didn't see his cab file.
Just run the cab file.
prelude91sit said:
i appreciate your help but i could care less what he posted cause it was useless.
so i just put the files anywhere?
Click to expand...
Click to collapse
ok u can put the cab file anywhere..
i usually put it on my memory card.
once u run the .cab file from ur memory card.. its gonna ask u where u wanna install the file.
Memory Card
Device
Network.
ur gonna select Device.
and to minimize IE u just click on the start tab on the top left side and click on today screen.
thanks for the help. im sorry but i thought i got but i think it did when i connected to my laptop. so i just download the files and run the setup while the wing is hooked up. or do i copy the files on the wing and then run the setup? im sorry but trying to figure out how to install the on the device without putting them in a folder. well thanks for all the help
thanks for the heads up ivan, its working for me.
cangri87 said:
ok if u have Open Touch.. Download the 2.1 cab.
install into ur device..
once u have it installed open Internet Explorer.
then Minimize Internet Explorer.. NOTICE I SAID MINIMIZE NOT CLOSE. "sorry for the caps"
and then just tap on the weather and it'll update..
u only have to open IE once. i guess that enables it.
Click to expand...
Click to collapse
thanks this helped me get mine working
blank today
how come my today screen is blank after installing and restarting, activating plugin, etc.? Tried with htc home 2.1 and htc home 5-tab patched... thnx in advance for any help.
towenk3 said:
how come my today screen is blank after installing and restarting, activating plugin, etc.? Tried with htc home 2.1 and htc home 5-tab patched... thnx in advance for any help.
Click to expand...
Click to collapse
that happened to me too. i enabled some other random today screen plugin (doesnt matter which one) and htc home appeared. then i just disabled the random one.
still blank
i tried activating several different plugins (and de-activating) with no success. any other ideas?
Hi,
I was really hoping to do this without having to ask for guidance!!
I have backed up my ROM via Kovskykitchen: all OK and nice clear tutorial! thx..
I have X1_HardSPL_V1 ready to run..
I have the Touch-IT Experience ROM..
I think I follow the process but have a question about HARDSPL : Once I have completed the process - will I be able to use the phone at that point - or will I have to flash a new ROM to use it? i.e. is HARDSPL just an unlock so to speak or does it wipe the phone?- been reading this very helpful thread http://forum.xda-developers.com/showthread.php?t=446070 by Phenx - ta..
Flashing the new rom:
all the detailed tutorials seem to be the MicroSD method.. I can't find a decent X1 walkthrough using activesync...
Can anyone point me in the right direction? I'm obviously searching wrong..
Thanks!!
(One other question: will flashing affect my sim contacts? Thanks)
I'll try and answer ur questions to the best of my ability but i can't say i know much about what hardspl is besides the ultimate tool
After you hardspl u will be able to use ur phone as normal. I believe it still has the same stock rom on it but again i'm not sure but i do know u will be able to use it.
There is a way to use activesync and its fairly simple. Establish a connection through activesync and then run the rom update utility and follow the instructions. This is the only method i've ever used and i've been flashing my phone since the wizard.
Hope this helps
Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?
I would suggest backing up your contacts to your sim card, pull your memory card and then flash AFTER you hrdspl the phone. The hrdspl enabled you to be able to flash the phone to another rom, it will not interfere with the operation of the phone afterwards.
WC
x1tom said:
Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?
Click to expand...
Click to collapse
Most ROM's are packed together with the flash prog. I do recommend the microSD method, as it's less prone to murphy's law.
always use the sd way, it far by the safest.
your sim contact will be left on the sim the other contacts yo want to backup.
hardspl is a unlock only utility, wont affect your phone, rom.
ive done it throught the sd way ...and its really simple and no problems, i had a few problems with hardspl ...but got that sorted quick enough.
yeah so i'd recommend the sd way.
Well don't have a microSD so did it via activesync...
HARDSPL - was painless - click - click, go make coffee - done!
I mistook the ROM update in the Touch zip for another HARDSPL.. It was infact (obviously) the update util needed.. Flashed to Touch-it .21 - As easy as HARDSPL....
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!
x1tom said:
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!
Click to expand...
Click to collapse
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!
well thats the icing on the cake!! cheers - worked a treat.. thanks all
fards said:
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!
Click to expand...
Click to collapse
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.
Angelusz said:
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.
Click to expand...
Click to collapse
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme
smaberg said:
always use the sd way, it far by the safest.
...
Click to expand...
Click to collapse
flashed my phone like 10 times now and NEVER used the SD version.
so from my point of view ... usw the USB version. saves loads of time.
plugin USB
sync if not allready done
start update and click a few times
done
download file on x1, save to sdcard,,,,, rename flash, much easier doesnt require windows pc can be done anywhere and less chance of failure
must have flashed different devices well over 100 times
probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.
narutoramen said:
probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.
Click to expand...
Click to collapse
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?
Ooops! Misspost.
fards said:
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme
Click to expand...
Click to collapse
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.
Angelusz said:
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.
Click to expand...
Click to collapse
mm what theme are you running?
Mine is pure black.. or do you mean the battery strip right along the top?
rotsu said:
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?
Click to expand...
Click to collapse
you dont need to falsh HardSPL again.
the tri colour thing comes up but after that it freezes on the loading screen I am running windows mobile 6.1 (came with phone).(sony Erricson Xperia x1i
mikebuckley888 said:
the tri colour thing comes up but after that it freezes on the loading screen. any fixes would be much apperichated.
Click to expand...
Click to collapse
for starters: retry w/o sd card
and add a little more info on how your phone is setup and what you already tried or not, no thought-readers out here (that I know of)
Does it say anything in perticular when it freezes? If you'd manage to by accident fail to flash a rom you might have this issue saying something about updating rom.
My refrigerator also doesn't work...
no serious dude, first read before posting.
And if you don't get out, give us so much info so that we could help you.
Good luck
maddude88 said:
Does it say anything in perticular when it freezes? If you'd manage to by accident fail to flash a rom you might have this issue saying something about updating rom.
Click to expand...
Click to collapse
Yep it has the loading screen with three dots.
(thanks veryone for you help)
have you hard-spl'd?
or is this what your trying to do?
yeah thats what i'm trying to do
Jonny4911 said:
have you hard-spl'd?
or is this what your trying to do?
Click to expand...
Click to collapse
yeah i'm trying to do that.