hey! Sorry if this sounds really stupid but I can´t get my ringtone together with vibration. Have been searching the forums all day but I can´t find anything.. This is probably VERY simple but I can´t figure it out....
So Please help me!
Cheers
Start->Settings->Phone then choose Ring type: "Vibrate and ring" , simple like that
thanx mate!
Is there anyway to adjust vibrate time like when the phone starts to ring it vibrates 2seconds then off 2sec and then again vibrate 2sec ..... ?
mass82 said:
Is there anyway to adjust vibrate time like when the phone starts to ring it vibrates 2seconds then off 2sec and then again vibrate 2sec ..... ?
Click to expand...
Click to collapse
yeah i am worring about that too, is there any way to set vibration to vibrate periodically like vibrate a second than 1 sec off than 1 sec vibrate?
Related
I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?
Put it in your sock? *cough*
i wanna to know the answer too....
Anyone?...
juiceppc said:
I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?
Click to expand...
Click to collapse
Stop the scheduled soft-resets?
NuShrike said:
Stop the scheduled soft-resets?
Click to expand...
Click to collapse
I have a couple ideas but they involve either a hammer, or a fish tank.....
Seriously I am looking around but have not found anything yet
Sorta weird you can't disable this :|
Diable vibrate
OK.. might seem odd but a found some materail that said that some of the software used to disable the led with kill the vibrate feature... I could not find the software.. but it give a place to start
collinssc said:
some of the software used to disable the led with kill the vibrate feature
Click to expand...
Click to collapse
There is a software, but I think a registry tweak will be easier:
Code:
Hkey_Local_Machine/Drivers/Builtin/AllLEDMgr
Change the "Index" value from 1 to 0
Soft-reset the device
Killing the vibrate isn't a feature, it's a consequence in this case.
And, it's not killing the vibrate on reset/power on.
I think this is something on the chipset level that can only be resolved by a altered ROM or "chipset" update from Qualcomm...??
stop vibrate at every soft-reset
Has someone been able to stop the vibrate starting at every soft-reset ?
I prefer to think of it more as a shudder whilst yawning as it wakes up
How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?
chris247 said:
Has someone been able to stop the vibrate starting at every soft-reset ?
Click to expand...
Click to collapse
Surely this must be a hardware issue which can't be changed?
I've change my ROM and radio more times than i can remember and still have the same issue. Correct me if i'm wrong but don't some of these ROM bases even come from different WM hardware (which doesn't have this problem)?
I don't think the vibration duration is linked with the hardware, there must be a way to configure this, as it is possible to configure the ringtone to increase the sound or not.
Anyone has already tried changing the vibration duration ?
chris247 said:
How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?
Click to expand...
Click to collapse
There's 2 ways you can put your phone into vibration mode:
1: tap the speaker icon on the top bar of the phone and select "vibrate" from the on, vibrate, off options.
2: tap the speaker icon on the top bar and leave it set to "on", but drag the two volume sliders to the bottom.
If you use method #1, when you get a notification it will give you 3 short bursts of vibration.
If you use method #2, the duration of vibration for reminders and other notifications (email, sms, etc.) is related to the length of the audio alert. I have my phone set to make noise and vibrate at the same time and when I get a message, it vibrates for the entire time that it's making noise, and not a bit longer. When I drag the volume sliders down instead of putting it exclusively into "vibrate" it vibrates for the same amount of time, so I imagine it is still playing the sound file I have associated for that notification, just not outputting it to the speaker, and vibrates while the sound file is playing.
So if you want a shorter vibration when your alarm arrives, choose a shorter beep, tone, jingle, whatever sound you want it to make when you get an alarm. Or use option #1 for putting it into vibration mode if the 3 short bursts are acceptable to you.
The vibrate upon startup is some low level thing, and I have no idea how to change it.
I've had a Tilt for a few weeks and starting to love it. Previously I had a Blackberry and I loved being able to have both vibrate and sound simultaneously to notify receiving a call. Anyone able to do this on the Tilt/Kaiser?
Vibrate then or and ring on Tilt
It is possible to have the phone vibrate and ring simultaneously or vibrate then ring.
Start - Settings - Phone - Ring type (vibrate and ring)
runuts said:
It is possible to have the phone vibrate and ring simultaneously or vibrate then ring.
Start - Settings - Phone - Ring type (vibrate and ring)
Click to expand...
Click to collapse
Sometimes I just can't help but feel like an idiot... Thanks...
Does anyone know of a programme to activate intermittent vibration? The continuous is a bit annoying. Thanks.
hi. sorry for my english.today my diamond doesnt ring.it vibrates but it doesnt react to an incoming call with sound.I look sounds and notifications.there isnt a problem.how can i fix it ?thanks
Soft reset the phone, the button is underneath the stylus compartment.
I did it but doesnt ring too.i solved the problem.in the system status there is system volume and near it ring volume.my ring volume was minumum ı dont know there was a ring volume .thanks for ur reply
Thanks for this! You wouldn't beleive how puzzled this had me today! I was about to give up on the phone since I was missing calls al day!
I had the same issue, on the volume screen there is a grey arrow at the top once you turn up the system volume, click the grey arrow and tun up the ring volume...
Subject No such standard function
Stardard has ring after vibration, but after ring started there is no vibration... but i need ring and vibration after vibration only...
On my Diamond I can edit it in registry (I'm not sure that it's always RingTone0):
Key- [HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
Entry - "Script"="v2w3v2c20av0pc250r"
In my example it vibrates twice and then vibrates and rings with increasing ring
For details about script's codes see wiki:Registry Ringtone Scripts
Good luck!
What if i just want 3 vibros for 3 seconds, and then usual vibro and full call ring?
try:
av1w0.1v1w0.1v1w0.1v0p10r
nice, about delays between vibro and vibro duration - i can hadle it
one problem exists after RING played - it goes back to 3 vibros...
try:
v1w0.1v1w0.1v1w0.1av0p10r
or maybe so ( with 2 sec delay between each repeat ):
v1w0.1v1w0.1v1w0.1av0p10w2r
i have done such thing:
av1.5w1v1.5w1v1.5w1v0pr
how to make that after ringing begin it will play 5 seconds with 25% percent volume, then 5 seconds with 50% and then rest the time at 100%?
NOT REPEATING RING FROM beginning i.e melody
Hi all,
My phone doesn't ring when there are incoming calls, it only flashes the light. When I switch to vibrate mode, it does vibrate. How can I fix such problem. Please advice.
Thx in advance for any input.
There are 2 volume settings: System volume, and Ringer volume. Make sure both of them are turned up. I assume you can hear other sounds?
GeckoDev said:
There are 2 volume settings: System volume, and Ringer volume. Make sure both of them are turned up. I assume you can hear other sounds?
Click to expand...
Click to collapse
i have same problem and its not the ringer volume setting. someone please help. im missing so many calls cuz of this. thanks
As already noted, sounds like you have System Vol up and have also gone into 'Settings/ Sound', and made sure phone volume slider is turned up.
I had the same problem for awhile, the two are linked, unless you manually turn the sound down (in Settings), then it will respond to the System level buttons only to the manually set sound level. I had inadvertantly turned my phone volume all the way down, thinking the System setting would adjust it to wherever I wanted it, not so and I missed some calls.
You probably have also checked to make sure the Phone ringer selection is not set to 'none'.
i had this same problem and i had turned everything up and still nothin..i did a hard restart and after that it worked
Exact same problem, didn't realise until reading this thread that there is an arrow at the top of the volume control which takes you to the ringer volume. Problem solved - cheers.
kienle+spiess said:
Exact same problem, didn't realise until reading this thread that there is an arrow at the top of the volume control which takes you to the ringer volume. Problem solved - cheers.
Click to expand...
Click to collapse
oh man! i was messing with this problem for almost a week! day after day lurking to the every little setting until i thought of googling the thing..
so this was it, the arrow at the top. damn!
TF3D settings tab > Sound > Notifications sound on
ang3l said:
oh man! i was messing with this problem for almost a week! day after day lurking to the every little setting until i thought of googling the thing..
so this was it, the arrow at the top. damn!
Click to expand...
Click to collapse
hhhhhhhhh
i'm too
I laughed a lot & I laughed a lot
Hi all,
My phone doesn't ring when there are incoming calls, it only flashes the light. When I switch to vibrate mode, it does vibrate. How can I fix such problem. Please advice.
Have the same problem, but I don't see any <, button or another sound/volume menu, pls anyone?
Htc touch pro not ringing
I haven't had a ringer in six months. Only vibrate. I have tried everything. I don't understand 'the arrow at the top of the volume' control. Is that the slide button on the side of the phone that has system/ring options?
hi.. i also had same problem..what i do was... copy ringtone to music in phone memory..and one thing only the cut edited mp3 can play.. i think.. mine now ok..