Is anyone aware of a way to change the system volume increments when using the up/down keys on the phone or E100 remote?
The volume can be adjusted more finely with the touch screen, but this means taking the phone out and fiddling around a bit. Some are finding the lowest volume you can get with hardware buttons a tad too loud with noise canceling phones that sit in the ear canal.
Thanks
Would be VERY usefull....
I too am wondering that. I looked in the tweaks section and searched around but no concrete answer for it.
This would actually be very usefull!!!
Don't sweat it Guys.
Both default volume bubble and HTC Volume Control controls the volume in following increments: Vibrate>Silent>20>40>60>80>100. There's no other way to fine tune it.
Maybe the HTC Volume Control UI is a bit misleading, but if you tap with the stylus, you'll see and hear that every procent has 3 corresponding lines.
If you tap it, you can get it in 1 line increments, this is not a misleading UI, it adjusts the volume in 1 step increments. You may not be able to notice it with the phones speaker but you sure can with earphones.
ljames28 said:
If you tap it, you can get it in 1 line increments, this is not a misleading UI, it adjusts the volume in 1 step increments. You may not be able to notice it with the phones speaker but you sure can with earphones.
Click to expand...
Click to collapse
Exactly.
If You listen to music 3bars is often too loud but 1 or 2 is perfect. So a solution for this would be very helpfull.
Greetz
Also looking for a solution to this problem...
I have a touch pro2 and as you describe here the system volume can be changed 1 bar at a time with finger.
But it can also be changed 1 bar at a time pressing the volume buttons (or volume buttons on headset) IF the screen is turned OFF. If the screen is ON the buttons will move it 3 bars.
If the phone is locked then it does not matter if the screen is OFF, it will still move it 3 bars at a time. So right now I never use the lock on the phone as I need the 1 bar step size when listening to music with my headset.
Related
Anybody ever heard of the ring volume dropping itself to the bottom of the slider?
I keep missing calls and texts because the ring volume has turned itself off
the radio button is set to 'on' so i slide the volume up to full, then click on the speaker icon to close that box. Open it up straight away and the slider is back at the bottom!
There are other people with the same problem, it has a topic right here: volume drop.
I always adjust my volume with the 2 sliders, because I've also missed several calls when using the profile-buttons.
I had the same problem. I discovered that if I tap on the speaker part of the icon located at the top in the title bar, it would set my volume to 0. If I tap on the noise part (the 3 lines to the right of the speaker icon) it would return to the normal volume. I'm not sure if this is a bug or a feature.
Stay0Puft said:
There are other people with the same problem, it has a topic right here: volume drop.
I always adjust my volume with the 2 sliders, because I've also missed several calls when using the profile-buttons.
Click to expand...
Click to collapse
fantastic, thanks.
I checked my sound & notification settings and they seemed to be set to not ring - very odd.
i'll check that thread out though
Hi peepz, did u find a way to hack the volume level, cuz it is too high for me when listening to mp3 even on the lowest volume with headphones
It would be nice to use all the bars, not to use it with steps of 4-5..
Use your finger or stylus you can adjust the volume slider 1 notch at a time. The buttons cause larger increments.
Hi Guys
I dont know if this is me but, it looks as if you cant change the system volume to the phone ringing volume. I know there is a tab over to change them both but the volume slider adjusts them both as the same time.
Im running an orange Diamond using
Orange Rom 1.37.405.1
Hi Sutt,
There're two volume settings: 1 for ring, 1 for system; I hadn't seen any UI that allows both to be set at the same time.
Under the Sound UI, you'll see the Ring Volume. Just "thumb" the screen up to see the System Volume. Or press the volume buttons to access the System Volume UI, and then immediately press the left arrow button at the top-left-hand corner to access the Ring Volume UI.
I set both to 80% most of the time. But when on wired ear-piece, I'll put system down to 5%; when in-door, ring to 60%.
Hope this helps.
Cheers.
I am using the KaiserTouch ROM along with the 3G dialer for video calling and I am noticing issues when trying to change the volume of the call using the scroll wheel.
For example, on the highest setting, the person I call gets feedback, so I turn the dial to lower the sound, but it lowers it too drastically and I can barely hear anything.
When trying to turn the sound back up, whilst the display shows full volume, the phone is still on a low volume setting.
Sometimes I can fix it by scrolling the wheel up and down, but sometimes it ends up cutting the sound altogether and will not go up. I have to hang up, and ring back.
Anyone else experienced this on the same ROM, or WM6.5 in general?
Thanks in advance!
not sure about your exact problem.
my scroll wheel has been screwed (hardware problem) since a few months after i got my tytn2 (brand new). essentially, the scroll wheel works but "skips" a LOT. for example, in any application, i click once down and it starts scrolling up and down like it has a mind of its own.
since then, i have trained myself to use the d-pad in all situations. during a call, i just flick the scroll wheel once to bring up the in-call volume control. then i use the d-pad to get to the volume level that i want. i suggest you try the same thing, i.e. try to use the d-pad to adjust the volume after bringing up the in-call volume slider with the scroll wheel.
see the posts 1027 and 1028:
http://forum.xda-developers.com/showthread.php?p=6453255#post6453255
follow that thread, might solve your problem
I recently received a Pixel 4xl and really like the phone except the call volume is a lot lower than other phones I have had. I have to press it up to my ear to be able to hear the other person. The volume is already set to the max. Is there a way to make this louder? The phone is not rooted, but will root if that is what it takes to fix the volume.
Thanks!
Mine is fine with the headset, but I had a similar bug with my pixel buds and maybe it's related.
While on a call. Press the volume up button, then while the volume slider is on the screen, slide the volume down and then slide it back up. You'll notice it's much louder. You can also try pressing volume up and then slide it down with your finger on the slider, then use the buttons to turn it back up.
I only had to do this once and then in call volume was fine after that.
For some reason it got stuck in some sort of limit where the ceiling wasn't really the ceiling.
Other than that, you can try factory reset. If not that, then it could be some sort of hardware issue.